Spectral distribution of X-Ray yield of the M-shell emission fromlaser produced gold plasma

Experimental measurements of the spectral distribution of keV X-ray energy conversion of the M-shell emission from gold plasma produced by a 4 GW, 5 nS Nd:glass laser are presented. At a laser intensity of 2×10¹³ W/cm², the overall X-ray yield for 2.0 ⩽hv⩽3.6 keV is determined to be 0.1% of the laser energy. The effect of the keV X-ray spectral distribution on radiation preheat is discussed     

飞秒激光-物质相互作用产生Kα X射线

 用无色散X射线谱仪分别在靶前后测量了飞秒激光辐照铜箔产生的Kα X射线,获得了能量转换效率。入射激光脉冲宽度33 fs,能量在50 mJ～5 J,强度10₁₇～10₁₉ W/cm₂。靶后发射的Kα X射线强度随入射激光能量的增加而增加,其单色性较靶前好。采用100 μm厚靶,其能量转换率为2.2×10_-5。     

钛空腔靶高强度keV X射线源的实验研究

利用神光-Ⅲ原型激光装置实验研究了8束ns激光脉冲从一端注入钛空腔靶产生的keV X射线源的辐射特征,发现keV X射线主要产生于腔轴附近;钛空腔靶内径过大时keV X射线能流的峰值强度较低,内径过小时keV X射线能流的持续时间较短。为了在4π空间内使钛空腔靶获得最大的X射线(4~7keV能段)转换效率,腔内径的最优值在1000~1300μm附近,此时的keV X射线转换效率为4.7%,是相同激光参数下钛平面靶的2倍左右。激光单端注入有底部钛膜和无底部钛膜的空腔靶对比实验显示,底膜能够增强keV X射线的发射。     

罗斯滤片法测量激光打靶X射线辐射通量

利用一套罗斯滤片系统测量激光轰击固体金属Ti平面靶产生的X射线辐射通量,系统包括两个相同的X射线探测器及相应滤膜。罗斯滤片法的优点在于利用相邻核素对X射线相似的阻止率,可滤出一个窄的能带并去除高能部分的干扰,获得了Ti平面靶K壳层X光辐射产额。实验结果表明:硬X射线能段在4.5~4.9keV之间的K壳特征辐射占优,连续谱所占份额较低(与晶体谱仪一致);随着激光能量的增加,特征辐射增加;激光强度接近2×1015 W/cm2时,能量转换效率出现峰值。     

X-Rays emission by high-intensity pulsed lasers irradiating thin foils at PALS laboratory

X-rays and forward ion emission from laser-generated plasma in the Target Normal Sheath Acceleration regime of different targets with 10-μm thickness, irradiated at Prague Asterix Laser System (PALS) laboratory at about 10¹⁶ W/cm² intensity, employing a 1,315 nm-wavelength laser with a 300-ps pulse duration, are investigated. The photon and ion emissions were mainly measured using Silicon Carbide (SiC) detectors in time-of-flight configuration and X-ray streak camera imaging. The results show that the maximum proton acceleration value and the X-ray emission yield growth are proportional to the atomic number of the irradiated targets. The X-ray emission is not isotropic, with energies increasing from 1 keV for light atomic targets to about 2.5 keV for heavy atomic targets. The laser focal position significantly influences the X-ray emission from light and heavy irradiated targets, indicating the possible induction of self-focusing effects when the laser beam is focalized in front of the light target surface and of electron density enhancement for focalization inside the target.     

DD reaction enhancement and X-ray generation in a high-current pulsed glow discharge in deuterium with titanium cathode at 0.8–2.45 kV

The DD reaction yield (3-MeV protons) and the soft X-ray emission from a titanium (Ti) cathode surface in a periodic pulsed glow discharge in deuterium were studied at a discharge voltage of 0.8–2.45 kV and a discharge current density of 300–600 mA/cm². The electron screening potential U_e = 610 ± 150 eV was estimated in the range of deuteron energies 0.8 keV < E_d < 2.45 keV from an analysis of the DD reaction yield as a function of the accelerating voltage. The obtained data show evidence for a significant enhancement of the DD reaction yield in Ti in comparison to both theoretical estimates (based on the extrapolation of the known DD reaction cross section for E_d ≥ 5 keV to low deuteron energies in the Bosch-Halle approximation) and the results of experiments using accelerators at the deuteron energies E_lab ≥ 2.5 keV and current densities 50–500 μ A/cm². Intense emission of soft X-ray quanta (10¹³–10¹⁴ s^?1 cm^?2) was observed at an average energy of 1.2–1.5 keV. The X-ray emission intensity and the DD reaction yield enhancement strongly depend on the rate of deuterium diffusion in a thin subsurface layer of Ti cathode.     

Formation of Ti and TiN ultra-thin films on Si by ion beam sputter deposition

Ultra-thin titanium and titanium nitride films on silicon substrate were obtained by ion beam sputtering of titanium target in vacuum and nitrogen atmosphere, using argon ions with energy of 5 keV and 15 μA target current. Elemental composition and chemical state of obtained films were investigated by X-ray photoelectron spectroscopy with using Mg-Kα X-ray radiation (photon energy 1253.6 eV). It was shown that it is possible to form both ultra-thin titanium films (sputtering in vacuum) and ultra-thin titanium nitride films (sputtering in nitrogen atmosphere) in the same temperature conditions. Photoelectron spectra of samples surface, obtained in different steps of films synthesis, detailed spectra of photoelectron emission from Si 2p, Ti 2p, N 1s core levels and also X-ray photoelectron spectra of Auger electrons emission are presented.     

黑腔中等离子体相互作用的流体力学现象观测

激光间接驱动惯性约束聚变实验中,黑腔内情况复杂,在激光烧蚀和辐射烧蚀等的驱动下,光斑区、冕区、纯辐射烧蚀区、射流区的多种等离子体以不同规律运动.发展了X光双能段窄能带的时间分辨成像方法,用以观测黑腔内多种等离子体的运动情况.在真空黑腔中观测到清晰的射流,分析了射流产生机制及其速度;在黑腔中充气,能有效消除射流和抑制冕区等离子体运动,但两种物质界面处可能会出现流体力学不稳定性等现象,分析了界面处的压力平衡关系和密度陡变情况.     

激光加热Cu和NaF靶产生的1.2keV区X射线转换效率的测量

介绍了激光加热Cu靶和NaF靶发射的在1.2keV区X射线转换效率的测量方法和实验结果。结果表明,在激光辐照功率密度为1×10¹³—1×10¹⁴W·cm^-2条件下,激光波长为1.06μm或0.53μm时,Cu等离子体发射的1.2KeV区X射线的转换率为NaF等离子体的4—5倍;对此两种等离子体,激光波长为0.53μm的X射线转换效率是波长为1.06μm的2倍左右。 关键词：     

Laser-produced plasma helium-like titanium Kα x-ray source and its application to Rayleighben-Taylor instability study

Several experiments are performed on the ShenGuang-II laser facility to investigate an x-ray source and test radiography concepts. X-ray lines emitted from laser-produced plasmas are the most practical means of generating these high intensity sources. By using a time-integrated space-resolved keV spectroscope and pinhole camera, potential helium-like titanium Kα x-ray backlighting (radiography) line source is studied as a function of laser wavelength, ratio of pre-pulse intensity to main pulse intensity, and laser intensity (from 7.25 to ～11.3× 10¹⁵ W/cm²⁾. One-dimensional radiography using a grid consisting of 5 μm Au wires on 16 μm period and the pinhole-assisted point projection is tested. The measurements show that the size of the helium-like titanium Kα source from a simple foil target is larger than 100 μm, and relative x-ray line emission conversion efficiency ξ_x from the incident laser light energy to helium-like titanium K-shell spectrum increases significantly with pre-pulse intensity increasing, increases rapidly with laser wavelength decreasing, and increases moderately with main laser intensity increasing. It is also found that a gold gird foils can reach an imaging resolution better than 5-μm featured with high contrast. It is further demonstrated that the pinhole-assisted point projection at such a level will be a novel two-dimensional imaging diagnostic technique for inertial confinement fusion experiments.     

Nuclear Reactions under Irradiation of Deuterated Structures by X Rays

Measurements of emission from nuclear reaction products (neutrons and protons) have been carried out appearing in the deuterated structures of textured CVD diamond, palladium, titanium, and zirconium under irradiation with a beam of X rays using independent methods (neutron detector based on He-3 counters, Si surface-barrier semiconductor detectors and CR-39 track detector). The possibility of enhancement of both DD reaction and multi-particle deuterium fusion by the beam of X rays with energy ranging 20–30 keV in solid deuterated targets has been established. Analysis of X-ray fluorescence spectra of the target bombarded by beams of ions has revealed “additional” peaks, the occurrence of which cannot be related to any of the known elements, and requires separate study.

     

Control parameters for ion heating and X-ray emission from laser induced cluster explosion

The highest energies of the ions obtained from the explosion of an atomic cluster in an intense femtosecond laser field can vary greatly depending on the cluster size, atomic species and the peak intensity, duration and shape of the laser pulse. By careful choice of these parameters the ion energies, electron energies or X-ray emission can be optimised. A relationship is described that allows for rapid determination of the optimum experimental parameters. We present experimental data of keV X-ray emission from Argon clusters, which investigate intensity and pulse duration effects. In addition we present the first results from closed-loop optimal control, pulse-shaping experiments that optimise X-ray emission and show a significant enhancement in the X-ray yield. PACS 36.40.Gk; 52.50.Jm     

空气中激光等离子体通道的三次谐波光谱特性研究

对不同条件下强激光在空气中形成等离子体通道的三次谐波光谱特性进行了研究。单脉冲能量12 mJ,脉宽30 fs,重复频率10 Hz,中心波长795 nm的飞秒激光脉冲经0.5 m焦距的凹面镜聚焦,在空气中形成了等离子体通道, 并在前 向观测到谱线半峰全宽（FWHM）为15 nm的三次谐波。随着脉冲啁啾的变化,三次谐波的光谱出现红移或兰移,当激光脉冲附带+1.3×105fs2的二阶色散时,三次谐波谱线红移且谱峰强度增长了两倍。同时 ,通过改变可编程声光色散滤波器（AOPDF）光谱调制的位置（Hole position）,三次谐波的光谱也发生频移。     

Absolute spectral distribution of soft X-ray emission from laserproduced gold plasma

Quantitative measurement of spectral distribution of soft X-ray emission from laser produced plasmas and estimation of X-ray conversion efficiency are reported. The X-ray emission from planar gold target irradiated by an Nd:glass laser was recorded using a high resolution transmission grating spectrograph. Spectral distribution of X-ray intensity was derived using calibrated film data and a deconvolution procedure to account for contribution of higher diffraction orders. Results of conversion efficiency per unit solid angle, at a laser intensity of ~4×10¹² W/cm² (λ_L = 1.054 μm), for 10< λ <80 Å and in the water window spectral region (23< λ< 44 Å) are presented. A three-fold increase in conversion efficiency was observed for second harmonic laser irradiation (λ_L = 0.527 μm) at an intensity of 8×10¹² W/cm²     

小孔等离子体运动实验方法

在间接驱动惯性约束聚变的黑腔中,辐射烧蚀的高Z等离子体的流体力学运动过程对激光注入黑腔的效率、辐射场均匀性和通过诊断口的黑腔辐射温度诊断都有显著影响。为研究诊断口在黑腔辐射场中的等离子体缩口过程,用激光产生X光辐射加热低Z泡沫填充的金黑腔诊断口,以激光辐照钛平面靶产生的2～5 keV高能段窄能区X光作为背光源,用X光分幅相机获得了源靶和小孔靶两种靶型的小孔等离子体运动过程图像,研究了X光烧蚀的小孔等离子体的流体力学运动过程,探索了定量测量小孔等离子体面密度的空间分布与时间演化过程的实验诊断方法,初步给出小孔等离子体的面密度。     

Enhanced soft X-ray emission from carbon nanofibers irradiated with ultra-short laser pulses

A comparative experimental study of the X-ray emission in the water-window spectral region has been performed using carbon nanofibers (CNFs) of different sizes and graphite plate targets, irradiated with ultra-short (Ti:sapphire) laser pulses. More than an order of magnitude enhancement in the X-ray yield is observed from CNFs of 60-nm diameter with respect to graphite targets. The X-ray emission from CNFs of 160-nm diameter was also high. The integrated X-ray yield of these carbon-based targets scales with the laser intensity (I _L) as I_L ^{~ 1.3-1.4}I_{\mathrm{L}}^{\sim 1.3-1.4} in the intensity range of 4×10¹⁶–4×10¹⁷ W/cm². The effect of the laser pulse duration on the X-ray emission from the CNFs was also studied by varying the pulse duration from 45 fs up to 3 ps at a constant fluence of 2×10⁴ J/cm². The optimum laser pulse duration for maximum X-ray emission increases with the diameter of the CNFs used. The results are explained from physical considerations of heating and hydrodynamic expansion of the CNF plasma in which resonance field enhancement takes place while passing through two times the critical density. The results add to the efforts towards achieving an efficient low-cost water-window X-ray source for microscopy.     

Multiple charge states of titanium ions in laser produced plasma

An intense laser radiation (10¹² to 10¹¹ W/cm⁻²) focused on the solid target creates a hot (≥1 keV) and dense plasma having high ionization state. The multiple charged ions with high current densities produced during laser matter interaction have potential application in accelerators as an ion source. This paper presents generation and detection of highly stripped titanium ions (Ti) in laser produced plasma. An Nd:glass laser (KAMETRON) delivering 50 J energy (λ=0.53 μm) in 2.5 ns was focused onto a titanium target to produce plasma. This plasma was allowed to drift across a space of ∼3 m through a diagnostic hole in the focusing mirror before ions are finally detected with the help of electrostatic ion analyzer. Maximum current density was detected for the charge states of +16 and +17 of Ti ions for laser intensity of ∼10¹¹ W/cm⁻².     

Hard X-ray generation from microdroplets in intense laser fields

Microdroplets of 15-μm diameter are subjected to ultra-short laser pulses of intensities up to 10¹⁵Wcm⁻² to produce hot dense plasma. The hot electrons produced in the microdroplet plasma result in efficient generation of hard X-rays in the range 50–150keV at an irradiance as low as 8×10¹⁴Wcm⁻². The X-ray source efficiency is estimated to be about 2 ×10⁻⁷%. A prepulse that is about 11ns ahead of the main pulse strongly influences the droplet plasma and the resulting X-ray emission. For a similar laser prepulse and intensity, no measurable hard X-ray emission is observed when the laser is focused on a solid target of similar composition and this indicates that liquid droplet targets are best suited for hard X-ray generation in laser–plasma interactions.     

超短脉冲强激光与固体靶相互作用中Kα射线的实验研究

在相对论激光强度下，对p偏振30 fs激光与固体Cu靶相互作用中产生的Kα射线进行了实验研究.采用刀边成像技术和单光子计数X射线CCD相结合的探测装置，在单发激光脉冲打靶时同时得到X射线源的尺寸、能谱以及Kα光子的转换效率等多种信息.实验结果与Reich等人的理论计算结果有明显的差异，Kα光子的能量转换效率在激光功率密度为1.6×10¹⁸W/cm²的条件下达到最大值7.08×10^-6/sr.根据这一结果并结合蒙特卡罗程序，推断出在这一聚焦光强下激光能量转换为前向超热电子的效率约为10%.     

Optimization of soft x-ray line emission from laser-produced carbon plasma with laser intensity

Absolute measurement for He-α resonance (1s^{2 1}S₀?1s2p¹ P ₁, at 40.2 Å) line emission from a laser-produced carbon plasma has been studied as a function of laser intensity. The optimum laser intensity is found to be ≈1.3×10¹² W/cm² for the maximum emission of 3.2 × 10¹³ photons sr^?1 pulse^?1. Since this line lies in the water window spectral region, it has potential application in x-ray microscopic imaging of biological sample in wet condition. Theoretical calculation using corona model for the emission of this line is also carried out with appropriate ionization and radiative recombination rate coefficients