How to handle nanomaterials? The re-entry of individuals into the philosophy of chemistry

In this paper we will argue that the categories of physical individuals and chemical stuff are not sufficient to face the chemical ontology if nanomaterials are taken into account. From a perspective that considers ontological questions and wonders which the items involved in science are, we will argue that the domain of nanoscience must be considered as populated by entities that are neither individuals, as those of physics, nor stuff, as those items of macro-chemistry. This discussion, in virtue of the analysis of the nature of nanomaterials, leads to propose a proper ontological category for nanoparticles: nanoindividuals. Nanomaterials are sorts of individuals, but they are different from physical individuals and from chemical stuff. We will also claim to contribute to the growing field of the philosophy of chemistry, especially regarding discussions that manifest not only epistemological but also ontological issues. In this scenario, the field on nanoscience is particularly challenging.     

Evaluation of the Long‐term Cumulative UVA Facial Exposure of Queensland School Teachers derived for an Extended Period from the OMI Satellite Irradiance

This research presents a novel methodology for deriving the total daily broadband solar UVA (320–400 nm) received by school teachers during their working day from Ozone Monitoring Instrument (OMI) satellite solar noon UVA irradiance measurements for a Queensland subtropical site (27.5°S, 152°E). Daily UVA exposures are weighted to the anatomical human cheek (anterior infra‐orbital region) for teachers wearing and not wearing broad‐brimmed hats. The method utilizes the OMI UVA irradiance data collected daily at high temporal resolution over 2005 to 2016 to derive the total daily UVA exposure to a horizontal plane. These horizontal plane exposures are scaled by factors to take into account the timing of outdoor activity. The relationship between exposures to a horizontal plane and those to a vertical plane and the protection provided by a broad‐brimmed hat was assessed to evaluate the total daily UVA exposures to the cheek for classroom and physical education teaching staff expected to be outside at different periods of the day. The developed method enables the total daily UVA exposure to specific anatomical sites to be evaluated from the satellite solar noon irradiance at locations that do not have access to surface‐based instrumentation capable of recording in the solar UVA waveband.     

From Fish Waste to Value: An Overview of the Sustainable Recovery of Omega-3 for Food Supplements

The disposal of food waste is a current and pressing issue, urging novel solutions to implement sustainable waste management practices. Fish leftovers and their processing byproducts represent a significant portion of the original fish, and their disposal has a high environmental and economic impact. The utilization of waste as raw materials for the production of different classes of biofuels and high-value chemicals, a concept known as “biorefinery”, is gaining interest in a vision of circular economy and zero waste policies. In this context, an interesting route of valorization is the extraction of omega-3 fatty acids (ω-3 FAs) for nutraceutical application. These fatty acids, such as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) have received attention over the last decades due to their beneficial effects on human health. Their sustainable production is a key process for matching the increased market demand while reducing the pressure on marine ecosystems and lowering the impact of waste production. The high resale value of the products makes this waste a powerful tool that simultaneously protects the environment and benefits the global economy. This review aims to provide a complete overview of the sustainable exploitation of fish waste to recover ω-3 FAs for food supplement applications, covering composition, storage, and processing of the raw material.     

Employment of Carbon Nanomaterials for Welding Polyethylene Joints with a Nd:YAG Laser

Single-lap polymeric joints can be obtained using laser welding overlapping two polymeric sheets, with one laser transparent and the other laser adsorbent. In this study we employed crystalline carbon nanomaterials (in amounts of 0.2, 0.5, and 1.0 wt.%) as filler to enhance the absorption of polyethylene (UHMWPE type). A Nd:YAG laser operating at 1064 nm was used as a power source to make the welded joints. Morphological, mechanical, and calorimetrical tests were carried out to study the strength of the joints made. Serious attention was paid to find the best compromise between exposure time to laser light and filler amount. We found that in the optimal conditions (with 0.2 wt.% filler and 60 s exposure time) the joint exhibits a good shear strength with a regular welded area. In fact, the best conditions guarantee proper absorption power of the laser light and deep interpenetration of the chains between the two polymeric sheets without any damage.     

Physical characterization of Ge films on polyethylene obtained by pulsed laser deposition

A Nd:YAg laser, operating in fundamental wavelength at 1064 nm, is focused at an intensity of the order of 10¹⁰ W/cm² to ablate a solid Ge target. A Laser Ion Source (LIS) system is employed to produce ion emission at high directionality, high current, high rate of production and high charge states.     

Eight MeV per charge state from 300 ps laser ion acceleration by using micrometric foils

Proton acceleration using high-intensity laser pulses, at 10¹⁶ W/cm² was studied irradiating different types of thin metal and plastic targets having 1-micron thickness. The maximization of the proton energy process was investigated optimizing the laser parameters, the irradiation conditions and the target properties. Employing 600–700 J laser pulse energy, a focalization inducing self-focusing effects and using targets with optimized thickness, it was possible to accelerate protons up to energies of above 8 MeV. The time-of-flight diagnostics has allowed to monitor the plasma properties and to control the ion acceleration process.     

Characterization of a Smartphone Camera's Response to Ultraviolet A Radiation

As part of a wider study into the use of smartphones as solar ultraviolet radiation monitors, this article characterizes the ultraviolet A (UVA; 320–400 nm) response of a consumer complementary metal oxide semiconductor (CMOS)‐based smartphone image sensor in a controlled laboratory environment. The CMOS image sensor in the camera possesses inherent sensitivity to UVA, and despite the attenuation due to the lens and neutral density and wavelength‐specific bandpass filters, the measured relative UVA irradiances relative to the incident irradiances range from 0.0065% at 380 nm to 0.0051% at 340 nm. In addition, the sensor demonstrates a predictable response to low‐intensity discrete UVA stimuli that can be modelled using the ratio of recorded digital values to the incident UVA irradiance for a given automatic exposure time, and resulting in measurement errors that are typically less than 5%. Our results support the idea that smartphones can be used for scientific monitoring of UVA radiation.     

Ultraviolet Reflection Irradiances and Exposures in The Constructed Environment For Horizontal,Vertical and Inclined Surfaces

Ultraviolet (UV) reflection in the urban constructed environment is not well understood for topical issues such as measuring and modeling the received UV exposure due to that UV reflection for outdoor workers. Both predominantly specular and diffuse reflecting surface types have been identified and investigated for the erythemal UV reflection ratio variation due to solar zenith angle and orientation. This paper presents relationships between erythemal UV reflection ratios measured for non‐horizontal and horizontal surfaces, with predominantly specular surface types indicating stronger relationships with solar zenith angles than diffuse reflecting surfaces types. Erythemal UV exposures caused by the same reflecting surface types at three inclinations are also investigated. Non‐horizontal surfaces can increase erythemal UV exposures compared to erythemal UV exposures received from the same horizontal surface by factors of 1.07–1.46 for specific body sites and by 1.01–1.70 for averages of group body sites for zinc aluminium coated steel sheeting.