Design and assembly of ternary Pt/Re/SnO<Subscript>2</Subscript> NPs by controlling the zeta potential of individual Pt,Re, and SnO<Subscript>2</Subscript> NPs

In this study Pt, Re, and SnO₂ nanoparticles (NPs) were combined in a controlled manner into binary and ternary combinations for a possible application for ethanol oxidation. For this purpose, zeta potentials as a function of the pH of the individual NPs solutions were measured. In order to successfully combine the NPs into Pt/SnO₂ and Re/SnO₂ NPs, the solutions were mixed together at a pH guaranteeing opposite zeta potentials of the metal and oxide NPs. The individually synthesized NPs and their binary/ternary combinations were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning transmission electron microscopy (STEM) combined with energy dispersive X-ray spectroscopy (EDS) analysis. FTIR and XPS spectroscopy showed that the individually synthesized Pt and Re NPs are metallic and the Sn component was oxidized to SnO₂. STEM showed that all NPs are well crystallized and the sizes of the Pt, Re, and SnO₂ NPs were 2.2, 1.0, and 3.4 nm, respectively. Moreover, EDS analysis confirmed the successful formation of binary Pt/SnO₂ and Re/SnO₂ NP, as well as ternary Pt/Re/SnO₂ NP combinations. This study shows that by controlling the zeta potential of individual metal and oxide NPs, it is possible to assemble them into binary and ternary combinations.

Open image in new window

Graphical abstract ?

     

Green synthesis and characterization of Au@Pt core–shell bimetallic nanoparticles using gallic acid

In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core–shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl₄⁻ and PtCl₆²⁻, where the AuCl₄⁻ ions are preferentially reduced to Au cores and the PtCl₆²⁻ ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl₄/H₂PtCl₆, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core–shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH₄ reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core–shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.     

Formation of Sn@C Yolk–Shell Nanospheres and Core–Sheath Nanowires for Highly Reversible Lithium Storage

As one promising anode material with high theoretical capacity, metallic tin has attracted much research interest in the field of lithium‐ion batteries. Here, two types of tin/carbon (Sn@C) core–shell nanostructures with inner buffering voids are fabricated from SnO₂ hollow nanospheres via a facile chemical vapor deposition (CVD) method. The crystallinity and surface topography of SnO₂ hollow nanospheres are found to affect the morphology of resultant Sn@C materials. Sn@C yolk–shell nanospheres and core–sheath nanowires are obtained from the as‐prepared SnO₂ and high‐temperature annealed SnO₂ nanospheres, respectively. The unique Sn@C nanostructures can mitigate the agglomeration/pulverization of Sn nanoparticles and electrical disconnection from the current collector caused by the large volume change during the lithium alloying/dealloying process. Both Sn@C yolk–shell and core–sheath nanostructures show stable cycling performance up to 500 cycles with specific capacities of ca. 430 and 520 mA h g^?1, respectively.     

Synthesis of composite gold/tin-oxide nanoparticles by nano-soldering

Composite Au–SnO₂ nanoparticles (NPs) are synthesized by nano-soldering of pure Au and SnO₂ NPs. The multi-step process involves synthesis of pure Au and SnO₂ NPs separately by nanosecond pulse laser ablation of pure gold and pure tin targets in deionized water and post-ablation laser heating of mixed solution of Au colloidal and SnO₂ colloidal to form nanocomposite. Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HRTEM) were used to study the effect of laser irradiation time on morphology of the composite Au–SnO₂ NPs. The spherical particles of 4 nm mean size were obtained for 5 min of post-laser heating. Increased mean size and elongated particles were observed on further laser heating. UV–vis spectra of Au–SnO₂ nanocomposites show red shift in the plasmon resonance absorption peak and line shape broadening with respect to pure Au NPs. The negative binding energy shift of Au 4f_7/2 peak observed in X-ray Photoelectron Spectra (XPS) indicates charge transfer in the nano-soldered Au–SnO₂ between gold and tin oxide and formation of soldered nanocomposite.     

Silver,gold and the corresponding core shell nanoparticles: synthesis and characterization

Simple strategies for producing silver and gold nanoparticles (AgNP and AuNP) along with the corresponding core shell nanoparticles (Au–Ag and Ag–Au) by reduction of the metal salts AgBF₄ and HAuCl₄ by NaBH₄ in water will be presented. The morphologies of the obtained nanoparticles are determined by the order of addition of reactants. The obtained NPs, with sizes in the range 3–40 nm, are characterized by transmission electronic microscopy (TEM) and UV–Vis absorption spectroscopy, so as to evaluate their qualities. Moreover, a direct electrochemical detection protocol based on a cyclic voltammetry in water solution that involves the use of glassy carbon electrode is also applied to characterize the prepared NPs. The developed NPs and the related electroanalytical method seem to be with interest for future sensing and biosensing applications including DNA sensors and immunosensors.     

Synthesis of a Au‐on‐Pd Heteronanostructure Stabilized by Citrate and its Catalytic Application

The preparation of Au‐on‐Pd heteronanostructure (HNS) using citrate‐stabilized polycrystalline Pd nanoparticles (NPs) as the seeds is described. The resulting Au‐on‐Pd HNS is characterized and it is found that the formation of Au‐on‐Pd HNS depends greatly on a ratio between Pd seeds and AuCl₄^? ions added and the optimal molar ratio is 10:1. If fewer AuCl₄^? ions are added (Pd/Au ratio is 100:1), the growth of Au NPs only occurs on part of the Pd seeds’ surface. The addition of more AuCl₄^? ions (Pd/Au ratio is 5:1) hinders the growth of Au NPs on the Pd seeds’ surface. To demonstrate the catalytic performance, the electrochemistry oxidation of ethanol and the reduction of p‐nitrophenol by NaBH₄ are chosen to examine the catalytic activity of Au‐on‐Pd HNS. Pd seeds, Au NPs, and poly(vinyl pyrrolidone) (PVP)‐stabilized PdAu nanoalloy are used as the references for comparison. In the first reaction, the catalytic reactivity of Au‐on‐Pd HNS is better than that of corresponding pure Pd or Au NPs, while the opposite occurs for the latter reaction. The catalytic activity of Au‐on‐Pd HNS is much higher than that of PVP‐stabilized PdAu nanoalloy.     

SHINERS and plasmonic properties of Au Core SiO2 shell nanoparticles with optimal core size and shell thickness

Shell‐isolated nanoparticles (NPs)‐enhanced Raman spectroscopy (SHINERS) can be potentially applied to virtually any substrate type and morphology. How to take a step forward to prepare SHINERS NPs (SHINs) with superior performance is critical for the practical applications of surface‐enhanced Raman scattering (SERS) in the breadth and depth. Here, we present a method to obtain 120 nm diameter gold NPs coated with ultrathin silica shells (1–4 nm). The silica shell can be controlled growth through carefully tuning a series of parameters, such as amount of 3‐aminopropyl triethoxysilane used, pH, reaction time, and reaction temperature. We compare the enhancement factor of the obtained 120 nm Au with a 4 nm silica shell NPs to the 55 nm Au with a 4 nm silica shell NPs, and the activity of a 120 nm SHINs is nearly 24 times that the 55 nm SHIN from a single particle view. We also compare the enhancement factor of 1 nm silica shell Au@SiO₂ NPs with the bare Au NPs. The enhancement factor of 1 nm silica shell Au@SiO₂ NPs was found to be about twice that of the bare particles. For a deeper understanding of the source of the giant enhanced electrical field of the 1 nm silica shell Au@SiO₂ NPs, we study the plasmonic property of single 1 nm silica shell Au@SiO₂ NP on a gold film substrate through correlation of the structure of single NP using SEM with its SPR spectroscopy. We find that the multipolar interaction between the single Au@SiO₂ NP and gold film substrate is important for the SERS. Our studies on the performance of 120 nm SHINs and the plasmonic property of these particles can significantly expand the applications of SHINERS technique and improve the understanding of physical nature of SHINs. Copyright © 2013 John Wiley & Sons, Ltd.     

Facile synthesis of SnO2–ZnO core–shell nanowires for enhanced ethanol-sensing performance

The design of core–shell heteronanostructures is powerful tool to control both the gas selectivity and the sensitivity due to their hybrid properties. In this work, the SnO₂–ZnO core–shell nanowires (NWs) were fabricated via two-step process comprising the thermal evaporation of the single crystalline SnO₂ NWs core and the spray-coating of the grainy polycrystalline ZnO shell for enhanced ethanol sensing performance. The as-obtained products were investigated by X-ray diffraction, scanning electron microscopy, and photoluminescence. The ethanol gas-sensing properties of pristine SnO₂ and ZnO–SnO₂ core–shell NW sensors were studied and compared. The gas response to 500 ppm ethanol of the core–shell NW sensor increased to 33.84, which was 12.5-fold higher than that of the pristine SnO₂ NW sensor. The selectivity of the core–shell NW sensor also improved. The response to 100 ppm ethanol was about 14.1, whereas the response to 100 ppm liquefied petroleum gas, NH₃, H₂, and CO was smaller, and ranged from 2.5 to 5.3. This indicates that the core–shell heterostructures have great potential for use as gas sensing materials.     

Near‐Infrared‐Light‐Induced Fast Drug Release Platform: Mesoporous Silica‐Coated Gold Nanoframes for Thermochemotherapy

Development of advanced theranostics for personalized medicine is of great interest. Herein, a multifunctional mesoporous silica‐based drug delivery carrier has been developed for efficient chemo/photothermal therapy. The unique Au nanoframes@mSiO₂ spheres are elaborately prepared by utilizing Ag@mSiO₂ yolk–shell spheres as the template through spatially confined galvanic replacement method. Compared with the Ag@mSiO₂ yolk–shell spheres, the resultant Au nanoframes@mSiO₂ spheres show a strong and broad near‐infrared (NIR) absorbance in the 550–1100 nm region, high surface areas, and good biocompatibility. When irradiated with a NIR laser with a power intensity of 1 W cm^?2 at 808 nm, they can become highly localized heat sources through the photothermal effect. Moreover, the photothermal effect of the Au nanoframes can significantly promote the fast release of doxorubicin. The in vitro studies show obvious synergistic effects combining photothermal therapy and chemotherapy in the Au nanoframes@mSiO₂ spheres against Hela cells. It is believed that the as‐obtained multifunctional vehicles provide a promising platform for the combination of hyperthermia and chemotherapy for cancer treatment application.     

Fabrication of NIR‐Excitable SERS‐Active Composite Particles Composed of Densely Packed Au Nanoparticles on Polymer Microparticles

A simple fabrication method is demonstrated for surface‐enhanced Raman scattering (SERS)‐active plasmonic nanoballs, which consisted of Au nanoparticles (NPs) and core–shell polystyrene and amino‐terminated poly(butadiene) particles, by heterocoagulation and Au NP diffusion. The amount of Au NPs introduced into the core–shell particles increases with the concentration of Au NPs added to the aqueous dispersion of the core–shell particles. When the amount of Au NPs increases, closely packed, three‐dimensionally arranged and close‐packed Au NPs arrays are formed in the shells. Strong SERS signals from para‐mercaptophenol adsorbed onto composite particles with multilayered Au NPs arrays are obtained by near‐infrared (NIR) light illumination.     

Plasmonics properties of trimetallic Al@Al2O3@Ag@Au and Al@Al2O3@AuAg nanostructures

Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric–metal–metal (DMM) system consisting of a particle with a dielectric core (Al@Al₂O₃), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al₂O₃@Ag@Au and Al@Al₂O₃@AgAu triple-layered core–shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core–shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core–shell Al@Al₂O₃. The Al@Al₂O₃ particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al₂O₃@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al₂O₃@Ag@Au core–shell or Al@Al₂O₃@AgAu alloy. The formation of core–shell and alloy nanostructure was confirmed by UV–visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400–520 nm with increasing ablation time suggesting formation of Ag–Au alloy in the presence of alumina particles in the solution.     

Preparation of monodisperse bimetallic nanorods with gold nanorod core and silver shell and their plasmonic property and SERS efficiency

In this study, monodisperse bimetallic nanorods with gold (Au) nanorod core and silver (Ag) shell (Au@AgNRs) were synthesized through seed‐mediated growth process by reduction of AgNO₃ using Au nanorods with narrow size and shape distribution as seeds. With increasing the used amount of AgNO₃, the Ag shell thickness of their lateral facets is raised faster than that of their two tips, leading to a decrease of their aspect ratios. Four plasmon bands are observable on the extinction spectra of Au@AgNRs, which are attributed to the longitudinal dipolar plasmon mode, transverse dipolar plasmon mode, and octupolar plasmon mode of the core‐shell structured bimetallic nanorods, respectively. As their Ag shell thickness increases, their longitudinal plasmon band blue‐shifts notably with the transverse plasmon band blue‐shifting and the two octupolar plasmon bands red‐shifting slightly, due to the decrease of their aspect ratios and enhancement of Ag plasmon resonance contribution. When used as surface‐enhanced Raman scattering (SERS) substrate for probing minute amounts of 4‐mercaptobenzoic acid in aqueous solution, Au@AgNRs have much stronger SERS activity than Au nanorods, and the obtained Raman signals are highly reproducible arising from their excellent monodispersity. Their SERS activity is remarkably increased with their Ag shell thickness thanks to the enhancing surface electric field and the chemical enhancement associated with electronic ligand effect. Copyright © 2014 John Wiley & Sons, Ltd.     

Comparing the Contribution of Visible‐Light Irradiation,Gold Nanoparticles,and Titania Supports in Photocatalytic Nitroaromatic Coupling and Aromatic Alcohol Oxidation

Under visible‐light irradiation, gold nanoparticles (Au NPs) supported by titania (TiO₂) nanofibers show excellent activity and high selectivity for both reductive coupling of nitroaromatics to corresponding azobenzene or azoxylbenzene and selective oxidation of aromatic alcohols to corresponding aldehydes. The Au NPs act as active centers mainly due to their localized surface plasmon resonance (LSPR) effect. They can effectively couple the photonic energy and thermal energy to enhance reaction efficiency. Visible‐light irradiation has more influence on the reduction than on the oxidation, lowering the activation energy by 24.7 kJ mol^?1 and increasing the conversion rate by 88% for the reductive coupling, compared to merely 8.7 kJ mol^?1 and 46% for the oxidation. Furthermore, it is found that the conversion of nitroaromatics significantly depends on the particle size and specific surface area of supported Au NPs; and the catalyst on TiO₂(B) support outperforms that on anatase phase with preferable ability to activate oxygen. In contrast, for the selective oxidation, the effect of surface area is less prominent and Au NPs on anatase exhibit higher photo‐catalytic activity than other TiO₂ phases. The catalysts can be recovered efficiently because the Au NPs stably attach to TiO₂ supports by forming a well‐matched coherent interface observed via high‐resolution TEM.     

Self‐Supporting AuCu@Cu Elongated Pentagonal Bipyramids Toward Neutral Glucose Sensing

Controlling the electronic structure of a catalyst has become an important approach to tune and optimize its antipoisoning ability and catalytic efficiency for a chemical reaction. Using d ‐mannitol as a structure‐directing agent to induce size transformation and twinned defects in copper particles, penta‐twinned Cu elongated pentagonal bipyramids as supports have been synthesized, and HAuCl₄ is reduced in situ to form an AuCu alloy on the surface of Cu, generating a self‐supporting AuCu@Cu core–shell structure for application as a glucose sensor in a neutral medium. The AuCu@Cu elongated pentagonal bipyramids with 0.42 at% Au show activities comparable with the Au and Pt catalyst but are more tolerant toward Cl^? than Au and more tolerant toward H_3–xPO₄^x? than Cu. The mass activity of AuCu@Cu reaches 0.10 A mg^?1 of Au at 0.6 V versus Ag/AgCl (3 m KCl) in a pH 8.0 buffer. The self‐supporting AuCu@Cu elongated pentagonal bipyramids are promising catalysts for glucose sensing in a neutral medium. This work offers an effective way to design antitoxic and durable catalysts with ultralow content of noble metal for glucose sensing.     

Laser generated Ag and Ag–Au composite nanoparticles for refractive index sensor

Localized surface plasmon resonance (LSPR) wavelength of metal nanoparticles (NPs) is highly sensitive to size, shape and the surrounding medium. Metal targets were laser ablated in liquid for preparation of spherical Ag and Ag@Au core–shell NP colloidal solution for refractive index sensing. The LSPR peak wavelength and broadening of the NPs were monitored in different refractive index liquid. Quasi-static Mie theory simulation results show that refractive index sensitivity of Ag, Ag–Au alloy and Ag@Au core–shell NPs increases nearly linearly with size and shell thickness. However, the increased broadening of the LSPR peak with size, alloy concentration and Au shell thickness restricts the sensing resolution of these NPs. Figure-of-merit (FOM) was calculated to optimize the size of Ag NPs, concentration of Ag–Au alloy NPs and Au shell thickness of Ag@Au core–shell NPs. The refractive index sensitivity (RIS) and FOM were optimum in the size range 20–40 nm for Ag NPs. Laser generated Ag@Au NPs of Au shell thickness in the range of 1–2 nm showed optimum FOM, where thin layer of Au coating can improve the stability of Ag NPs.     

Enhanced blue photoluminescence and new crystallinity of Ag/organic rubrene core-shell nanoparticles through hydrothermal treatment

Light-emitting organic semiconductors have attracted considerable attention for the nanoscale fabrication of organic-based displays and their potential application in optoelectronics, plasmonics, and photonics. In this study, core-shell hybrid nanostructures of organic rubrene coated on Ag nanoparticles (NPs) have been synthesized using a chemical reduction method. The thickness of the rubrene shell was 2.6–6.0 nm and the diameter of the Ag core was 30–70 nm. The optical and structural properties of the Ag/rubrene core-shell NPs were tuned by hydrothermal (HT) treatment at 190 °C. The Ag/rubrene core-shell NPs were characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray (EDX) spectroscopy before and after the HT treatment, and their structural properties were confirmed through X-ray diffraction (XRD) analysis. XRD peaks related to an orthorhombic phase were observed along with the original triclinic crystal structure of the rubrene shell, and the triclinic crystal domain size increased from 28.2 nm to 30.8 nm owing to the HT treatment. Interestingly, the green light emission (λ_em = 550 nm) of the Ag/rubrene core-shell NPs changed to blue light emission (λ_em = 425 nm), increasing in intensity through the HT treatment. This is caused by the crystal change with H-type aggregation and enhanced energy transfer from a surface plasmon resonance.     

Thermally Evaporated Ag–Au Bimetallic Catalysts for Efficient Electrochemical CO2 Reduction

CO₂ reduction reaction (CO₂RR) has indispensable significance for carbon recycling and renewable energy production. As typical electrochemical catalysts, Au and Ag show relatively high reaction activity and selectivity in CO₂RR. In this study, a series of Ag–Au bimetallic catalysts are designed and synthesized through the thermal evaporation method for efficient yet massive production of electrochemical catalysts. The Ag–Au catalysts show significantly enhanced activity and selectivity in CO₂RR, which is mainly attributed to the increased grain boundaries with well-dispersed single Ag atoms. After the optimization, Au20Ag10 exhibits the best performance with a CO Faraday efficiency of 89% at −0.9 V (vs the reversible hydrogen electrode) with good stability.     

使用金属掺杂SnO2(110)作为表面催化剂的电催化CO2还原反应：通过调控Sn:O原子比例来控制产物

电催化CO₂还原反应可以产生HCOOH和CO,目前该反应是将可再生电力转化为化学能存储在燃料中的最有前景的方法之一. SnO₂作为将CO₂转换为HCOOH和CO的良好催化剂,其反应发生的晶面可以是不同的. 其中(110)面的SnO₂非常稳定,易于合成. 通过改变SnO₂(110)的Sn:O原子比例,得到了两种典型的SnO₂薄膜：完全氧化型(符合化学计量)和部分还原型. 本文研究了不同金属(Fe、Co、Ni、Cu、Ru、Rh、Pd、Ag、Os、Ir、Pt和Au)掺杂的SnO₂(110),发现在CO₂还原反应中这些材料的催化活性和选择性是不同的. 所有这些变化都可以通过调控(110)表面中Sn:O原子的比例来控制. 结果表明,化学计量型和部分还原型Cu/Ag掺杂的SnO₂(110)对CO₂还原反应具有不同的选择性. 具体而言,化学计量型的Cu/Ag掺杂的SnO₂(110)倾向于产生CO(g),而部分还原型的表面倾向于产生HCOOH(g). 此外,本文还考虑了CO₂还原的竞争析氢反应. 其中Ru、Rh、Pd、Os、Ir和Pt掺杂的SnO₂(110)催化剂对析氢反应具有较高的活性,其他催化剂对CO₂还原反应具有良好的催化作用.     

A sonochemical assisted synthesis of hollow sphere structured tin (IV) oxide on graphene oxide sheets for the low-level detection of environmental pollutant mercury in biological samples and foodstuffs

In modern approaches for nanomaterials synthesis, ultrasonication plays an important role in providing the larger surface area and smaller crystalline size properties that are favorable to electrochemical techniques. Herein, we report the tin (IV) oxide on graphene oxide nanoparticles were synthesized (SnO₂@GO NPs) by ultrasonic methodology (UZ SONOPULS HD 3400 Ultrasonic homogenizer) with the total power of 400 W and the (frequency of 20 kHz; 140 W/dm³). The formation of as-prepared SnO₂@GO NPs and its surface morphology were scrutinized over XRD, XPS, TEM, and FESEM. Besides, the sonochemically prepared SnO₂@GO NPs were employed for the determination of environmental hazardous mercury (Hg). As a result, the modified electrode acquired a very low-level detection limit of 1.2 nM with a wider range of 0.01–10.41-µM and 14.52–225.4-µM for the detection of Hg. Finally, the practical applicability of SnO₂@GO NPs in spiked human blood serum and tuna fish samples shows appreciable found and recovery values..     

Yolk–Shell‐Structured Cu/Fe@γ‐Fe2O3 Nanoparticles Loaded Graphitic Porous Carbon for the Oxygen Reduction Reaction

Core–shell Cu/γ‐Fe₂O₃@C and yolk–shell‐structured Cu/Fe@γ‐Fe₂O₃@C particles are prepared by a facile synthesis method using copper oxide as template particles, resorcinol‐formaldehyde as the carbon precursor, and iron nitrate solution as the iron source via pyrolysis. With increasing carbonization temperature and time, solid γ‐Fe₂O₃ cores are formed and then transformed into Fe@γ‐Fe₂O₃ yolk–shell‐structured particles via Ostwald ripening under nitrogen gas flow. The composition variations are studied, and the formation mechanism is proposed for the generation of the hollow and yolk–shell‐structured metal and metal oxides. Moreover, highly graphitic carbons can be obtained by etching the metal and metal oxide nanoparticles through an acid treatment. The electrocatalytic activity for oxygen reduction reaction is investigated on Cu/γ‐Fe₂O₃@C, Cu/Fe@γ‐Fe₂O₃@C, and graphitic carbons, indicating comparable or even superior performance to other Fe‐based nanocatalysts.