Ag-Cu纳米颗粒修饰的N掺杂TiO2纳米棒阵列及其高效光催化CO2还原应用

本文采用微纳加工方法制备了负载高密度Ag-Cu纳米颗粒的N掺杂TiO₂纳米棒阵列样品. 通过TiO₂的N掺杂,可将其吸光范围调控至与Ag纳米颗粒的等离激元吸收频率相匹配的波段,从而实现复合材料中肖特基结与共振能量转移过程的协同作用. 与此同时,Cu纳米颗粒可以为CO₂还原提供活性位点. 在全谱光照射下,复合样品光催化CO₂还原的活性显著提高,CH₄生成速率可达720 μmol·g^-1·h^-1.     

Pd修饰Cu电极的电化学CO2还原

利用微分电化学质谱和电化学原位衰减全反射红外光谱技术探究了Cu和CuPd催化剂上CO₂和CO的电化学还原行为. 红外光谱观察到了生成甲醇、甲烷与乙烯的CH_x中间物种. 在CuPd电极CO₂还原过程中，红外光谱的CO吸附峰起始电位比Cu正移大约300 mV，说明CuPd能够有效促进CO₂还原；CO饱和溶液中，Cu和CuPd电极CO起始吸附电位基本相同；两电极上CO谱带出现的电位与CO₃^2-的谱带降低的电位基本相同，说明CO的吸附需要CO₃^2-的脱附. 利用电化学在线质谱发现在CuPd电极上CO还原产生CH₄和CH₃OH的起始电位比Cu电极正移约200 mV. 推测催化活性的提升可能是由于Pd的引入改变了Cu的d能带，且Pd吸附更多的H，从而促进CO₂还原，使CO能够与H结合并被深度还原.     

焙烧温度对SiO2负载的Co3O4纳米粒子表面氧缺陷浓度和CO氧化催化性能的影响

以传统的浸渍法,在不同焙烧温度下制备了用于CO氧化反应的Co₃O₄/SiO₂催化剂．通过激光拉曼光谱(Raman)、X射线光电子能谱(XPS)、X射线衍射(XRD)、程序升温还原(TPR)和X射线吸收精细结构谱(XAFS)表征了该系列催化剂的结构．在所有的催化剂中,XRD和Raman光谱都只检测到了Co₃O₄晶相的存在．与Co₃O₄体相相比,XPS结果表明在200 oC焙烧的(Co₃O₄(200)/SiO₂)催化剂中Co₃O₄表面上存在着过量的Co²⁺．与XPS的结果一致,TPR结果表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄表面上存在氧缺陷, 并且XAFS结果也表明Co₃O₄(200)/SiO₂催化剂中Co₃O₄具有更多的Co²⁺．提高焙烧温度使得过量的Co²⁺进一步氧化为Co³⁺,同时降低了表面氧缺陷浓度,从而得到计量比的Co₃O₄4/SiO₂催化剂．在所有的负载催化剂中Co₃O₄(200)/SiO₂催化剂表现出了最好的CO氧化催化性能,表明过量Co²⁺和表面氧缺陷的存在能够促进Co₃O₄催化CO氧化反应的活性.     

双金属镍-锰/γ-Al2O3催化剂对甲烷二氧化碳重整反应的影响 (cited: 1)

用浸渍法制备γ-Al₂O₃负载的Ni-Mn双金属催化剂．在500～700 oC按照17:17:2的CO₂/CH₄/N₂比例,以36 mL/min的载气流速进行甲烷二氧化碳重整反应, 利用甲烷二氧化碳的转化率、生成的合成气H₂/CO比例以及长期稳定性等指标评价了催化剂的催化性能． 实验表明, 添加Mn提高催化性能并使双金属催化剂的稳定性更高, 比单金属催化剂更好地抑制焦炭生成,Mn最合适的添加量0.5wt％ ．通过BET、CO2-TPD、TGA、XRD、SEM、EDX和FTIR各种技术对催化剂进行了表征．     

氧氩比对SnO2/Ag/SnO2透明导电膜光电性能的影响

在室温及不同的氧氩比条件下,采用射频磁控溅射Ag层和直流磁控溅射SnO₂层,在载玻片衬底上制备出了SnO₂/Ag/SnO₂多层薄膜.用霍尔效应测试仪、四探针电阻测试仪和紫外-可见-近红外光谱仪等表征了薄膜的电学性质和光学性质.实验结果表明:当氧氩比为1:14时,所制得的薄膜的光电性质优良指数最大,为1.69×10^-2 Ω^-1;此时,薄膜的电阻率为9.8×10^-5 Ω·cm,方电阻为9.68 Ω/sq,在400~800 nm可见光区的平均光学透射率达85%;并且,在氧氩比为1:14时,利用射频磁控溅射Ag层和直流磁控溅射SnO₂层在PET柔性衬底上制备出了光电性质优良的柔性透明导电膜,其在可见光区的平均光学透过率达85%以上,电阻率为1.22×10^-4 Ωcm,方电阻为12.05 Ω/sq.     

特定位点上CO2与(TiO2)n团簇相互作用的第一性原理研究

本文基于密度泛函理论系统地研究了(TiO₂)_n团簇上二氧化碳(CO₂)的吸附和活化性质. 计算结果表明,CO₂更倾向于吸附在(TiO₂)_n团簇的桥氧原子上,形成“化学吸附”碳酸盐络合物. 而CO更倾向于吸附到末端Ti-O的Ti原子上. 发现计算得到的碳酸盐振动频率值与实验获得的结果非常吻合,这表明配合物中CO₂的几何构型与其线性型相比,有微小的弯转. 通过对电子结构、电荷密度、电离势、HOMO-LUMO以及态密度的分析,证实了CO₂与团簇之间的电荷转移以及相互作用. 从预测的能量分布图来看,(TiO₂)_n团簇上的CO₂活化与结构密切有关,相比于块体的TiO₂,CO₂在团簇结构上更易于吸附和活化.     

光沉积Ru和RuO2的锐钛矿TiO2纳米片的光解水产氧

采用水热法以HF作为结构调控剂合成了主要暴露（001）面的锐钛矿TiO₂纳米片,通过光沉积方法分别合成了负载Ru和RuO₂物种的光催化剂。利用X射线衍射、透射电镜和氢气程序升温还原等分析表征了催化剂的结构性质。通过光解水产氧反应来研究催化剂的催化性能,详细考察了Ru含量、负载方式以及氧化和还原处理等因素的影响,光解水产氧速率的差异证明了Ru物种在不同晶面的电荷-空穴分离效应。与负载单一助催化剂的Ru/TiO₂和RuO₂/TiO₂样品相比,活性最优的0.5%Ru-1.0%RuO₂/TiO₂样品由于负载了双助催化剂,其催化活性得到更大的提高,证实了在锐钛矿TiO₂上的晶面电荷-空穴分离效应.     

Sr2CeO4电荷迁移发光的光谱结构规律研究

利用高温固相反应法分别合成了不同物相形成机理的Sr₂CeO₄，Sr ₂CeO₄∶Ca ²⁺和Sr₂CeO₄∶Ba²⁺样品，并对其光谱特性进行 了研究.结果发现，对于由SrO和CeO₂直接反应生成的Sr₂CeO₄(Ⅰ)，激发主峰位于256nm 左右；而对于SrCeO₃和SrO反应生成的Sr₂CeO₄(Ⅱ)，激发主峰位于279nm左右.在Sr₂CeO₄(Ⅰ)中掺入Ca²⁺，其激发光谱随着Ca²⁺离子浓度的增加逐渐接近于Sr₂CeO_{4(Ⅱ)的激发光谱.激发主峰带应属于CeO6八面体终端Ce⁴⁺—O^2-键的电荷迁移 带.对于激发光谱中340nm左右的弱激发峰，其峰值波长不受形成机理及Ca²⁺掺杂的影响，只是其强度 随着 激发主峰的红移而增加，它可能属于CeO6八面体平面上Ce⁴⁺—O2-键的电荷 迁移带.形成机理及Ca²⁺掺杂对发射光谱没有影响.Ca²⁺在Sr 2CeO 4(Ⅱ)与Ba²⁺在Sr2CeO4(Ⅰ)和(Ⅱ)中均难 于替代Sr²⁺的位置.}     

CdTe太阳电池前电极SnO2:F/SnO2复合薄膜性能分析

减薄CdS窗口层是提高CdS/CdTe太阳电池转换效率的有效途径之一,减薄窗口层会对器件造成不利的影响,因此在减薄了的窗口层与前电极之间引入过渡层非常必要.利用反应磁控溅射法在前电极SnO₂:F薄膜衬底上制备未掺杂的SnO₂薄膜形成过渡层,并将其在N₂/O₂=4 ∶1,550 ℃环境进行了30 min热处理,利用原子力显微镜、X射线衍射仪、紫外分光光度计对复合薄膜热处理前后的形貌、结构、光学性能进行了表征,同时分析了复     

MgH2(110)表面Pd单原子催化氢脱附反应的第一性原理研究

本文采用第一性原理密度泛函理论计算研究了MgH₂(110)表面吸附单原子Pd后的氢脱附反应. 计算发现,在吸附一个Pd单原子后,MgH₂(110)表面氢脱附反应的能垒可以从1.802 eV显著地降低到1.154 eV,表明Pd单原子对于氢脱附具有很强的催化效应. 并且,Pd单原子催化还可以将氢脱附的温度从573 K显著地降低到了367 K,从而使MgH₂(110)表面的氢脱附反应更加容易和快速地发生. 此外,通过MgH₂(110)表面氢溢出机制的反向过程来讨论了氢脱附反应的微观过程. 该研究表明Pd/MgH₂薄膜在未来的实验中可作为良好的储氢材料.     

Enhanced gas-sensing behaviour of Ru-doped SnO2 surface: A periodic density functional approach

A theoretical study on Ru-doped rutile SnO₂(1 1 0) surface has been carried out by means of periodic density functional theory (DFT) at generalized gradient approximation (GGA-RPBE) level with a periodic supercell approach. Electronic structure analysis was performed based on the band structure and partial density of states. The results provide evidence that the electronic structures of SnO₂(1 1 0) surface are modified by the surface Ru dopant, in which Ru 4d orbital are located at the edge of the band gap region. It is demonstrated that molecular oxygen adsorption characteristics on stoichiometric SnO₂(1 1 0) surface are changed from endothermic to exothermic due to the existence of surface Ru dopant. The dissociative adsorption of molecular oxygen on the Ru_5c/SnO₂(1 1 0) surface is exothermic, which indicates that Ru could act as an active site to increase the oxygen atom species on SnO₂(1 1 0) surface. Our present study reveals that the Ru dopant on surface is playing both electronic and chemical role in promoting the SnO₂ gas-sensing property.     

Adsorption of CO and C2H4 on Rh-loaded thin-film dysprosium oxide

A dysprosium oxide thin film was deposited on Ru(0 0 0 1) by vapor depositing Dy in 2 × 10⁻⁷ torr O₂ while the Ru was at 700 K. The film was ca. 5 nm thick and produced a p(1.4 × 1.4) LEED pattern relative to the Ru(0 0 0 1) substrate. The adsorption and reaction of CO and C₂H₄ adsorbed on Rh supported on the Dy₂O₃ film were studied by TPD and SXPS. The CO initially reacted with loosely bound oxygen in the substrate to produce CO₂. After the loosely bound oxygen was removed, the CO adsorbed non-dissociatively in a manner similar to what is seen on Rh(1 1 1). C₂H₄ adsorbed on the Rh particles and underwent progressive dehydrogenation to produce H₂ during TPD. The C from the C₂H₄ reacted with the O in Dy₂O₃ to produce CO. CO dissociation on the Rh particles could be promoted by treating the Dy₂O₃ with C₂H₄ before CO exposure.     

A pulsed EPR study of the catalytic oxidation of CO over Cu/SnO2

The role of the Cu(II) in the catalytic oxidation of CO over Cu/SnO₂ with low Cu(II) content was studied by continuous wave EPR, electron spin echo envelope modulation (ESEEM) and hyperfine sublevel correlation (HYSCORE) spectroscopes. Three methods were employed for introducing the copper: (i) by coprecipitation, (ii) impregnation onto SnO₂ gel and (iii) impregnation onto calcined SnO₂. Two types of Cu(II) species were identified in these calcined Cu/SnO₂ materials. Those belonging to the first type, termed B and C, exhibit highly resolved EPR spectra with well defined EPR parameters and are located within the bulk of the oxide. The other group comprises a distribution of surface Cu(II) species with unresolved EPR features and are referred to as S. While the latter were readily reduced by CO the former required long exposures at high temperatures (> 673 K). The specific interactions of the different Cu(II) species with CO were investigated through the determination of the¹³C hyperfine coupling of enriched¹³CO. The ESEEM spectra of calcined samples, generated either by coprecipitation or impregnation, show after the adsorption of CO signals at the Larmor frequencies of^{117, 119}Sn and¹³C and at twice these Larmor frequencies. Although these signals indicate that^{117, 119}Sn and¹³C are in the close vicinity of Cu(II), they cannot provide the hyperfine couplings of these nuclei. This problem was overcome by the application of the HYSCORE experiment. The 2D HYSCORE spectra show well resolved cross peaks which provide the hyperfine interaction of these nuclei. Simulations of the HYSCORE spectra yield for^{117, 119}Sn an isotropic hyperfine constant,a _iso, of ±4.0 MHz and an anisotropic component,T _?, of ±2.0 MHz. Pulsed ENDOR spectra also showed^{117, 119}Sn signals which agree with the above values. The¹³C cross peaks yielda _iso=±1.0 MHz andT _?=±2.0 MHz. Similar C cross peaks were observed in spectra of calcined Cu/SnO₂ after the adsorption of CO₂. Based on the same hyperfine couplings in the samples exposed to¹³CO and¹³CO₂ the signals were assigned to surface carbonate species generated by part of the Cu(II) S type species rather then by species B and the role of the Cu(II) in the oxidation process is discussed.     

Effect of combination of noble metals and metal oxide supports on catalytic reduction of NO by H2

We investigated the effects of combination of noble metals M (Rh, Pd, Ir, Pt) and metal oxide supports S (Al₂O₃, SiO₂, ZrO₂, CeO₂) on the NO + H₂ reaction using planar catalysts with M/S two layered thin films on Si substrate. In this study, NO reduction ability per metal atom were evaluated with a specially designed apparatus employing pulse valves for the injection of reactant molecules onto catalysts and a time-of-flight mass spectrometer to measure multiple transient products: NH₃, N₂ and N₂O simultaneously as well as with an atomic force microscopy to observe the surface area of metal particles. The catalytic performances of Rh and Ir catalysts were hardly affected by a choice of a metal oxide support, while Pd and Pt catalysts showed different catalytic activity and selectivity depending on the metal oxide supports. This assortment is consistent with ability to dissociate NO depending on metals without the effect of any support materials. There, the metals to the left of Rh and Ir on the periodic table favor dissociation of NO and those to the right of Pd and Pt tend to show molecular adsorption of NO. Therefore, the catalytic property of noble metals could be assorted into two groups, i.e. Rh and Ir group whose own property would mainly dominate the catalytic performance, and Pd and Pt group whose interaction with metal oxides supports would clearly contribute to the reaction of NO with H₂. NO reduction activity of Pd and Pt was found to be promoted above that of Rh and Ir, provided that Pd and Pt were supported by CeO₂ and ZrO₂.     

The adsorption of CO,H2, H2, CO2 and H2O on carburized and graphitized Ni(110)

A study of the adsorption/desorption behavior of CO, H₂O, CO₂ and H₂ on Ni(110)(4 × 5)-C and Ni(110)-graphite was made in order to assess the importance of desorption as a rate-limiting step for the decomposition of formic acid and to identify available reaction channels for the decomposition. The carbide surface adsorbed CO and H₂O in amounts comparable to the clean surface, whereas this surface, unlike clean Ni(110), did not appreciably adsorb H₂. The binding energy of CO on the carbide was coverage sensitive, decreasing from 21 to 12 $\text{kcal}\text{mol}$ as the CO coverage approached 1.1 × 10¹⁵ molecules cm^?2 at 200K. The initial sticking probability and maximum coverage of CO on the carbide surface were close to that observed for clean Ni(110). The amount of H₂, CO, CO₂ and H₂O adsorbed on the graphitized surface was insignificant relative to the clean surface. The kinetics of adsorption/desorption of the states observed are discussed.     

不同pH酸性溶液中铂电极上氢析出和二氧化碳还原的电化学研究

本文利用循环伏安法和电化学原位红外光谱的联用,研究了Pt(111)和Pt膜电极在CO₂饱和的酸性溶液中氢析出和CO₂还原的竞争. 发现：(i)在pH>2的溶液中,主要反应是氢析出,界面pH值随着氢析出突然增加;(ii)通过红外光谱检测,CO_ad是CO₂还原过程中唯一的吸附中间体;(iii)CO_ad生成速率随着欠电位沉积氢(UPD-H)覆盖的增加而增大,并在氢析出的起始电位达到最大值;(iv)在氢析出时,CO_ad的减少与CO₂吸附和还原所必需的的中间产物(H_ad)有限的可用位点和停留时间相关.     

钴磷族化合物BaT2P2和BaT2As2(T=Co,Rh, Ir) 的电子结构

基于密度泛函理论(DFT)在广义梯度(GGA)下计算了钴磷族化合物BaT₂P₂和BaT₂As₂(T=Co, Rh, Ir)的电子结构.研究发现在BaCo₂P₂和BaCo₂As₂中,由于范霍夫畸点位于费米面附近使得费米能级处的态密度非常高,从而导致由斯通纳机理引起的巡游铁磁不稳定性.在从Co到 关键词： 电子结构 范霍夫畸点 斯通纳不稳定性     

The magnetic properties of RuF5

The structural unit of the pentafluorides MF₅ (M = Ru, Rh, Os, Ir, Pt) consists of M₄F₂₀ tetramers with the transition elements occupying the corners of the rhombus. In the case of RuF₅ the magnetic susceptibility vs. temperature curve shows a broad maximum at T ? 40 K. Neutron diffraction experiments below and above this temperature show that this maximum does not correspond to a magnetic three-dimensional ordering. Theoretical calculations based on isolated tetra-nuclear clusters of identical $\text{S =}\text{3}\text{2}$ spins have been applied. The intracluster exchange interactions are antiferromagnetic. The fitting of the susceptibility data leads to an exchange constant of $\text{J}\text{k}\text{= ?8.3 K}$.