Green synthesis and characterization of Au@Pt core–shell bimetallic nanoparticles using gallic acid

In this study, we developed a facile and benign green synthesis approach for the successful fabrication of well-dispersed urchin-like Au@Pt core–shell nanoparticles (NPs) using gallic acid (GA) as both a reducing and protecting agent. The proposed one-step synthesis exploits the differences in the reduction potentials of AuCl₄⁻ and PtCl₆²⁻, where the AuCl₄⁻ ions are preferentially reduced to Au cores and the PtCl₆²⁻ ions are then deposited continuously onto the Au core surface as a Pt shell. The as-prepared Au@Pt NPs were characterized by transmission electron microscope (TEM); high-resolution transmission electron microscope (HR-TEM); scanning electron microscope (SEM); UV-vis absorption spectra (UV-vis); X-ray diffraction (XRD); Fourier transmission infrared spectra (FT-IR). We systematically investigated the effects of some experimental parameters on the formation of the Au@Pt NPs, i.e., the reaction temperature, the molar ratios of HAuCl₄/H₂PtCl₆, and the amount of GA. When polyvinylpyrrolidone K-30 (PVP) was used as a protecting agent, the Au@Pt core–shell NPs obtained using this green synthesis method were better dispersed and smaller in size. The as-prepared Au@Pt NPs exhibited better catalytic activity in the reaction where NaBH₄ reduced p-nitrophenol to p-aminophenol. However, the results showed that the Au@Pt bimetallic NPs had a lower catalytic activity than the pure Au NPs obtained by the same method, which confirmed the formation of Au@Pt core–shell nanostructures because the active sites on the surfaces of the Au NPs were covered with a Pt shell.     

Organic‐inorganic hybrids based on phenanthrene‐functionalized gold nanoparticles for OLEDs

The electroluminescence intensity of the phenanthrene‐functionalized gold nanoparticles, PMPT‐Au nanoparticles/CPB: Ir(PIA)₂ (acac) film, was increased by 4.9 times compared with control device, CPB: Ir(PIA)₂ (acac) due to coupling between the excitons of emissive layer and localized surface plasmonic resonance of PMPT‐Au NPs. The maximum luminous efficiencies of devices II to IV with PMPT‐Au NPs were 39.2 cd A^?1 (11.8 V), 40.1 cd A^?1 (10.5 V), and 43.1 cd A^?1 (9.0 V), respectively. The increment of current efficiency with PMPT‐Au NP coated devices was strongly related to the energy transfer between the radiated light generated from CBP: Ir(PIA)₂ (acac) emissive layer and localized surface plasmonic resonance excited by PMPT‐Au NP layer.     

Design of Enhanced Catalysts by Coupling of Noble Metals (Au,Ag) with Semiconductor SnO2 for Catalytic Reduction of 4‐Nitrophenol

The reduction of 4‐nitrophenol (Nip) into 4‐aminophenol (Amp) by NaBH₄, which is catalyzed by both binary and ternary yolk–shell noble‐metal/SnO₂ heterostructures, is reported. The binary heterostructures contain individual Au or Ag nanoparticles (NPs) and the ternary heterostructures contain both Au and Ag NPs. The Au@SnO₂ yolk–shell NPs are synthesized via a silica seeds‐mediated hydrothermal method. Subsequently, the Au@SnO₂@Ag and Au@SnO₂@Au yolk–shell–shell (YSS) NPs are synthesized, whereby SnO₂ is located between the Au and Ag NPs. The morphology, composition, and optical properties of the as‐prepared samples are analyzed. For the binary heterostructures, the rate of the reduction reaction increases with decreasing particle size. The catalytic results demonstrate the synergistic effect of Au and Ag in the ternary metal–semiconductor heterostructures, which is beneficial to the catalytic reduction of Nip into Amp. Both the binary and ternary heterostructures exhibit significantly better catalytic performances than the corresponding bare Au and Ag NPs. It is envisaged that the current synthesized strategy will promote further interest in the field of bimetal NP‐based catalysis.     

High–Yield Production of Uniform Gold Nanoparticles with Sizes from 31 to 577 nm via One‐Pot Seeded Growth and Size‐Dependent SERS Property

In this work, uniform, quasi‐spherical gold nanoparticles (Au NPs) with sizes of 31–577 nm are prepared via one‐pot seeded growth with the aid of tris‐base (TB). Distinct from the seeded growth methods available in literature, the present method can be simply implemented by subsequently adding the aqueous dispersion of the 17 nm Au‐NP seeds and the aqueous solution of HAuCl₄ into the boiling aqueous TB solution. It is found that at the optimal pH range, the sizes of the final Au NPs and their concentrations are simply controlled by either the particle number of the Au seed dispersion or the concentration of the HAuCl₄ solution, while the latter enables us to produce large Au NPs at very high concentration. Moreover, as‐prepared Au NPs of various sizes are coated on glass substrates to test their surface‐enhanced Raman scattering (SERS) activities by using 4‐aminothiophenol (4‐ATP) molecules as probes, which exhibit “volcano type” dependence on the Au NP sizes at fixed excitation wavelength. Furthermore, the Au NPs with sizes of ≈97 and 408 nm exhibit the largest SERS enhancement at the excitation wavelength of 633 and 785 nm, respectively.     

Comparing the Contribution of Visible‐Light Irradiation,Gold Nanoparticles,and Titania Supports in Photocatalytic Nitroaromatic Coupling and Aromatic Alcohol Oxidation

Under visible‐light irradiation, gold nanoparticles (Au NPs) supported by titania (TiO₂) nanofibers show excellent activity and high selectivity for both reductive coupling of nitroaromatics to corresponding azobenzene or azoxylbenzene and selective oxidation of aromatic alcohols to corresponding aldehydes. The Au NPs act as active centers mainly due to their localized surface plasmon resonance (LSPR) effect. They can effectively couple the photonic energy and thermal energy to enhance reaction efficiency. Visible‐light irradiation has more influence on the reduction than on the oxidation, lowering the activation energy by 24.7 kJ mol^?1 and increasing the conversion rate by 88% for the reductive coupling, compared to merely 8.7 kJ mol^?1 and 46% for the oxidation. Furthermore, it is found that the conversion of nitroaromatics significantly depends on the particle size and specific surface area of supported Au NPs; and the catalyst on TiO₂(B) support outperforms that on anatase phase with preferable ability to activate oxygen. In contrast, for the selective oxidation, the effect of surface area is less prominent and Au NPs on anatase exhibit higher photo‐catalytic activity than other TiO₂ phases. The catalysts can be recovered efficiently because the Au NPs stably attach to TiO₂ supports by forming a well‐matched coherent interface observed via high‐resolution TEM.     

Facile Synthesis of Gd(OH)3‐Doped Fe3O4 Nanoparticles for Dual‐Mode T1‐ and T2‐Weighted Magnetic Resonance Imaging Applications

The facile hydrothermal synthesis of polyethyleneimine (PEI)‐coated iron oxide (Fe₃O₄) nanoparticles (NPs) doped with Gd(OH)₃ (Fe₃O₄‐Gd(OH)₃‐PEI NPs) for dual mode T₁‐ and T₂‐weighted magnetic resonance (MR) imaging applications is reported. In this approach, Fe₃O₄‐Gd(OH)₃‐PEI NPs are synthesized via a hydrothermal method in the presence of branched PEI and Gd(III) ions. The PEI coating onto the particle surfaces enables further modification of poly(ethylene glycol) (PEG) in order to render the particles with good water dispersibility and improved biocompatibility. The formed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs have a Gd/Fe molar ratio of 0.25:1 and a mean particle size of 14.4 nm and display a relatively high r₂ (151.37 × 10^?3m ^?1 s^?1) and r₁ (5.63 × 10^?3m ^?1 s^?1) relaxivity, affording their uses as a unique contrast agent for T₁‐ and T₂‐weighted MR imaging of rat livers after mesenteric vein injection of the particles and the mouse liver after intravenous injection of the particles, respectively. The developed Fe₃O₄‐Gd(OH)₃‐PEI‐PEG NPs may hold great promise to be used as a contrast agent for dual mode T₁‐ and T₂‐weighted self‐confirmation MR imaging of different biological systems.     

Systematic Control of Size and Morphology in the Synthesis of Gold Nanoparticles

The synthesis of gold nanoparticles (Au NPs) capped by poly(1‐vinylpyrrolidin‐2‐one (PVP, average  = 10 000 kDa) yields moderately dispersed (6–8.5 nm) product with limited morphological control while larger NPs (15–20 nm) are reliably prepared using trisodium citrate (Na₃Cit) as a reductant/capping agent. Excellent size control in the intermediate 10 nm regime is achieved by hybridizing these methodologies, with highly monodisperse, polycrystalline Au NPs forming. For a Na₃Cit:PVP:Au ratio of 3.5:3.5:1, anisotropic NPs with an aspect ratio of 1.8:1 suggest the systematic agglomeration of NP pairs. Enhanced control of NP morphology is allowed by the 1,2‐tetradecanediol reduction of Au^III in the presence of straight chain, molecular anti‐agglomerants. Last, ligand substitution is used to controllably grow preformed Au seeds. In spite of the extended growth phase used, the replacement of phosphine by 1‐pentadecylamine affords highly monodisperse, cuboidal NPs containing a single clearly visible twinning plane. The allowance of particle growth parallel to this close‐packed plane explains the remarkable particle morphology.     

Au nanoplate/polypyrrole nanofiber composite film: preparation,characterization and application as SERS substrate

Without any other additives or additional energy, Au nanoplates have been successfully prepared and integrated simultaneously with the dedoped polypyrrole nanofiber film via the in situ reduction of AuCl₄^– on the film surface. The morphology and structure of the as‐prepared composite film are characterized, and its application for surface‐enhanced Raman scattering is also investigated. It has been found that the morphology of as‐prepared Au nanoplates is dependent on the reaction duration, while the density is dependent on the concentration of AuCl₄^– ions in the reaction process. It is suggested that polypyrrole plays dual reducing and structure‐directing roles during the formation of Au nanoplates. Surface‐enhanced Raman scattering study shows that the Au nanoplates give an intensive and enhanced Raman scattering when 4‐aminothiophenol is used as a probing molecule. The employed approach may shed some light on simultaneously fabricating and immobilizing other noble metal micro/nanostructures with unique morphology. Copyright © 2011 John Wiley & Sons, Ltd.     

Rapid,Microwave‐Assisted,and One‐Pot Synthesis of Magnetic Palladium–CoFe2O4–Graphene Composite Nanosheets and Their Applications as Recyclable Catalysts

Here, a microwave‐assisted approach has been demonstrated to rapidly prepare magnetic Pd–CoFe₂O₄–graphene (GE) composite nanosheets in ethylene glycol (EG) solvent. The generation of both Pd and CoFe₂O₄ nanoparticles is accompanied with the reduction process of graphene oxide (GO) by EG. The surface morphologies and chemical composition of the composite nanosheets are characterized by transmission electron microscopy (TEM), energy‐dispersive X‐ray spectrometer (EDS), powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) measurements. The as‐prepared Pd–CoFe₂O₄–GE composite nanosheets exhibit a remarkable catalytic activity towards the reduction of 4‐nitrophenol by sodium borohydride (NaBH₄) at room temperature. The apparent kinetic rate constant (K _app) of this catalytic reaction could reach about 11.0 × 10^?3 s^?1. Moreover, the CoFe₂O₄ component exhibits a magnetic property, which could make the Pd–CoFe₂O₄–GE composite nanocatalysts separated from the suspension system. The catalytic conversion of the 4‐nitrophenol to 4‐aminophenol could reach 87.2% after four cycles. This work presents a simple, rapid, and versatile method to fabricate both metal and spinel‐type complex oxides on GE nanosheets, providing a new opportunity for their applications in the recyclable catalytic reaction.     

Gold‐Cluster‐Based Dual‐Emission Nanocomposite Film as Ratiometric Fluorescent Sensing Paper for Specific Metal Ion

A dual‐emission ratiometric fluorescent sensing film for metal ion detection is designed. This dual‐emission film is successfully prepared from chitosan, graphitic carbon nitride (g‐C₃N₄), and gold nanoclusters (Au NCs). Here, it is shown that the g‐C₃N₄ not only serves as the fluorescence emission source, but also enhances the mechanical and thermal stability of the film. Meanwhile, the Au NCs are adsorbed on the surface of chitosan film by the electrostatic interaction. The as‐prepared dual‐emission film can selectively detect Cu²⁺, leading to the quench of red fluorescence of Au NCs, whereas the blue fluorescence from g‐C₃N₄ persists. The ratio of the two fluorescence intensities depends on the Cu²⁺ concentration and the fluorescence color changes from orange red to yellow, cyan, and finally to blue with increasing Cu²⁺ concentration. Thus, the as‐prepared dual‐emission film can be worked as ratiometric sensing paper for Cu²⁺ detection. Furthermore, the film shows high sensitivity and selectivity, with low limit of detection (LOD) (10 ppb). It is observed that this novel gold‐cluster‐based dual‐emission ratiometric fluorescent sensing paper is an easy and convenient way for detecting metal ions. It is believed that this research work have created another avenue for the detection of metal ions in the environment.     

The adsorption and reaction of CO and O2 on PdAu alloy wires

Temperature programmed desorption (TPD) of CO and O₂ on PdAu alloy wires has been studied. The heat of adsorption, sticking coefficient and maximum coverage of CO were recorded for Pd, 83 Pd 17 Au, 60 Pd 40 Au. For Pd and Pd-rich alloys the heat of adsorption remained fairly constant but the maximum coverage fell markedly from 0.42 for Pd to less than 0.05 for bulk palladium atom fraction X_B^pd ? 0.83. The heat of adsorption, sticking coefficient and maximum coverage of O₂ were investigated for pure Pd. A very limited adsorption was recorded on 83 Pd 17 Au and none on the more Au-rich alloys. The adsorption data are used to discuss the CO + O₂ reaction. Activation energy and frequency factor are estimated on Pd, for the TPD conditions used here. Earlier rate constants (0.2 Torr, 150°C) for CO + O₂ on PdAu as a function of Au content correlates with the maximum coverage of chemisorbed CO, which in turn is correlated with the probability of finding a Pd_9±1 ensemble in the surface. Modern results on the d-band structure of the PdAu alloys suggest that the Pd₉ ensemble, i.e. a surface Pd atom without an Au atom in its coordination shell, would tend to optimise both the donor and acceptor actions of the Pd atoms involved in chemisorbing CO.     

Glycerol oxidation reaction using PdAu/C electrocatalysts

Glycerol oxidation reactions were evaluated using PdAu/C electrocatalysts under alkaline conditions. These electrocatalysts were synthesized in different ratios (100:0, 75:25, 50:50, 25:75, and 0:100), using the borohydride reduction method. The materials were characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), and electrochemical techniques associated by in situ attenuated total reflectance Fourier transformed infrared spectroscopy (ATR-FTIR). According to the XRD diffractograms, the presence of Pd and Au (face-centered cubic (fcc)) phases and Pd-Au (fcc) alloys were detected. Cyclic voltammetry assisted by ATR-FTIR in situ and chronoamperometry experiments revealed that the addition of Au remarkably enhances the electrocatalytic activity, due to the action of bifunctional effect, with addition of the interactions of alcohoxide with hydroxylate species in gold surface, and the stability of Pd/C catalysts. Highest current density (≈4 mA mg_metal ^?1) was achieved for the catalyst Pd₅₀Au₅₀/C and Pd₇₅Au₂₅/C, which is two times higher than that achieved by Pd/C (2 mA mg_metal ^?1), demonstrating the beneficial effect of the PdAu alloy.     

Self-organization of bimetallic PdAu nanoparticles on SiO<Subscript>2</Subscript> surface

Bimetallic PdAu nanoparticles on SiO₂ substrate were produced by a sequential room-temperature sputtering deposition method. By the atomic force microscopy technique we studied the nanoparticles self-organization mechanisms in various conditions. First, Pd nucleation and growth proceeds at the substrate defects and the Pd nanoparticles density increase rapidly. During the second sputtering deposition, Au atoms adsorb on the SiO₂ and diffuse toward Pd nanoparticles without forming new nuclei. The Au atoms are trapped by the preformed Pd nanoparticles, forming PdAu bimetallic nanoparticles which size increases. Furthermore, fixing the amount of deposited Pd and increasing the amount of deposited Au, we analyzed the evolution of the PdAu film surface morphology: we observe that the PdAu grows initially as three-dimensional islands; then the PdAu film morphology evolves from compact three-dimensional islands to partially coalesced worm-like structures, followed by a percolation morphology and finally to a continuous and rough film. The application of the interrupted coalescence model allowed us to evaluate the critical mean island diameter R _c ≈ 2.8 nm for the partial coalescence process. The application of the dynamic scaling theory of growing interfaces allowed us to evaluate the dynamic growth exponent β = 0.21 ± 0.01 from the evolution of the film surface roughness. Finally, fixing the amount of deposited Pd and Au we studied the self-organization mechanism of the PdAu nanoparticles induced by thermal processes performed in the 973–1173 K temperature range. The observed kinetic growth mechanism is consistent with a surface diffusion-limited ripening of the nanoparticles with a temperature-dependent growth exponent. The dependence of the growth exponent on the temperature is supposed to be linked to the variation with the temperature of the characteristics of the PdAu alloy. The activation energy for the surface diffusion process was evaluated in 0.54 ± 0.03 eV.     

Component‐Controlled Synthesis of Small‐Sized Pd‐Ag Bimetallic Alloy Nanocrystals and Their Application in a Non‐Enzymatic Glucose Biosensor

Small‐sized monodisperse Pd‐Ag alloy nanocrystals (NCs) are synthesized via a solid‐liquid and solid‐solid phase chemical route, i.e., sequential reduction of Pd(NO₃)₂ and AgNO₃ solid precursors in the liquid mixture of dodecylamine and 1‐octadecene, followed by fusion of formed Pd and Ag NCs at 250 °C. By controlling the addition sequence and molar ratio of the metallic precursors, a series of Pd‐Ag alloy NCs, including Pd₅Ag, Pd₂Ag, PdAg, PdAg₂, and PdAg₅, is obtained. The alloy NCs are highly crystallized and exhibit a strong atomic ensemble in addition to component‐dependent electronic effects. Pd₂Ag NCs have unique structure and electronic properties, showing a much faster electron transfer process at a modified glassy carbon electrode interface compared with that of other alloys. Therefore, the Pd₂Ag NCs are chosen as the electrocatalyst to evaluate the performance of Pd‐Ag nanoalloy and a novel non‐enzymatic glucose biosensor is fabricated. The biosensor exhibits an acceptable reproducibility, a good stability and low interferences, which can be used to examine glucose in clinic blood serum samples. This work provides a simple multiphasic reaction system to synthesize binary alloy NCs with well‐controlled componential ratio and opens the avenue to utilize them in biosensing or other advanced technological fields.     

Self‐Supporting AuCu@Cu Elongated Pentagonal Bipyramids Toward Neutral Glucose Sensing

Controlling the electronic structure of a catalyst has become an important approach to tune and optimize its antipoisoning ability and catalytic efficiency for a chemical reaction. Using d ‐mannitol as a structure‐directing agent to induce size transformation and twinned defects in copper particles, penta‐twinned Cu elongated pentagonal bipyramids as supports have been synthesized, and HAuCl₄ is reduced in situ to form an AuCu alloy on the surface of Cu, generating a self‐supporting AuCu@Cu core–shell structure for application as a glucose sensor in a neutral medium. The AuCu@Cu elongated pentagonal bipyramids with 0.42 at% Au show activities comparable with the Au and Pt catalyst but are more tolerant toward Cl^? than Au and more tolerant toward H_3–xPO₄^x? than Cu. The mass activity of AuCu@Cu reaches 0.10 A mg^?1 of Au at 0.6 V versus Ag/AgCl (3 m KCl) in a pH 8.0 buffer. The self‐supporting AuCu@Cu elongated pentagonal bipyramids are promising catalysts for glucose sensing in a neutral medium. This work offers an effective way to design antitoxic and durable catalysts with ultralow content of noble metal for glucose sensing.     

A Facile Strategy to Synthesize Cobalt‐Based Self‐Supported Material for Electrocatalytic Water Splitting

Designing and developing active, robust, and noble‐metal‐free catalysts with superior stability for electrocatalytic water splitting is of critical importance but remains a grand challenge. Here, a facile strategy is provided to synthesize a series of Co‐based self‐supported electrode materials by combining electrospinning and chemical vapor deposition (CVD) technologies. The Co, Co₃O₄, Co₉S₈ nanoparticles (NPs) are formed in situ simultaneously with the formation of carbon nanofibers (CNFs) during the CVD process, respectively. The Co‐based NPs are uniformly distributed through the CNFs and they can be directly used as the electrode materials for hydrogen evolution reaction (HER) in acid and oxygen evolution reaction (OER) in alkaline. The Co₉S₈/CNFs membrane exhibits the best HER activity with overpotential of 165 mV at j = 10 mA cm^?2 and Tafel slope of 83 mV dec^?1 and OER activity with overpotential of 230 mV at j = 10 mA cm^?2 and Tafel slope of 72 mV dec^?1. The onion‐like graphitic layers formed around the NPs not only improve the electrical conductivity of the electrode but also prevent the separation of the NPs from the carbon matrix as well as the aggregation.     

Characterization of Pd/Y multilayers with B4C barrier layers using GIXR and X‐ray standing wave enhanced HAXPES

Pd/Y multilayers are high‐reflectance mirrors designed to work in the 7.5–11 nm wavelength range. Samples, prepared by magnetron sputtering, are deposited with or without B₄C barrier layers located at the interfaces of the Pd and Y layers to reduce interdiffusion, which is expected from calculating the mixing enthalpy of Pd and Y. Grazing‐incident X‐ray reflectometry is used to characterize these multilayers. B₄C barrier layers are found to be effective in reducing Pd–Y interdiffusion. Details of the composition of the multilayers are revealed by hard X‐ray photoemission spectroscopy with X‐ray standing wave effects. This consists of measuring the photoemission intensity from the samples by performing an angular scan in the region corresponding to the multilayer period and an incident photon energy according to Bragg's law. The experimental results indicate that Pd does not chemically react with B nor C at the Pd–B₄C interface while Y does react at the Y–B₄C interface. The formation of Y–B or Y–C chemical compounds could be the reason why the interfaces are stabilized. By comparing the experimentally obtained angular variation of the characteristic photoemission with theoretical calculations, the depth distribution of each component element can be interpreted.     

Ru(III), Os(VIII), Pd(II) and Pt(IV) catalysed oxidation of glycyl–glycine by sodium N‐chloro‐p‐toluenesulfonamide: comparative mechanistic aspects and kinetic modelling

The Ru(III)/Os(VIII)/Pd(II)/Pt(IV)‐catalysed kinetics of oxidation of glycyl–glycine (Gly‐Gly) by sodium N‐chloro‐p‐ toluenesulfonamide (chloramine‐T; CAT) in NaOH medium has been investigated at 308 K. The stoichiometry and oxidation products in each case were found to be the same but their kinetic patterns observed are different. Under comparable experimental conditions, the oxidation‐kinetics and mechanistic behaviour of Gly‐Gly with CAT in NaOH medium is different for each catalyst and obeys the underlying rate laws:

• Rate = k [CAT]_t [Gly‐Gly]⁰ [Ru(III)][OH^?]^x
• Rate = k [CAT]_t[Gly‐Gly]^x [Os(VIII)]^y[OH^?]^z
• Rate = k [CAT]_t[Gly‐Gly]^x [Pd(II)][OH^?]^y
• Rate = k [CAT]_t[Gly‐Gly]⁰ [Pt(IV)]^x[OH^?]^y

Here, and x, y, z < 1 in all the cases. The anion of CAT, CH₃C₆H₄SO₂NCl^?, has been postulated as the common reactive oxidising species in all the cases. Under comparable experimental conditions, the relative ability of these catalysts towards oxidation of Gly‐Gly by CAT are in the order: Os(VIII) > Ru(III) > Pt(IV) > Pd(II). This trend may be attributed to the different d‐electronic configuration of the catalysts. Further, the rates of oxidation of all the four catalysed reactions have been compared with uncatalysed reactions, under identical experimental conditions. It was found that the catalysed reaction rates are 7‐ to 24‐fold faster. Based on the observed experimental results, detailed mechanistic interpretation and the related kinetic modelling have been worked out for each catalyst. Copyright © 2008 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterisation of Sonochemically Produced PdO Nanoparticles by X‐ray Absorption Near Edge Structure Spectroscopy

Brij‐35 [polyoxyethylene(23) lauryl ether] stabilised palladium nanoparticles, obtained on attempted sonochemical reduction of PdCl₂ by sodium sulfite in water under Argon, instantaneously oxidized to PdO. The particles obtained were stable and have narrow size distribution with an average size of 10 nm diameter. PdO nanoparticles were reduced to Pd nanoparticles in an autoclave by treatment with 50 bar hydrogen at 140 °C. The catalytic behaviour of Pd nanoparticles, thus obtained, is unusual in comparison with conventional Pd catalysts. The nanoparticles were characterized by UV‐Vis spectroscopy, TEM and their X‐ray Absorption Near Edge Structure (XANES) at the Pd‐L‐III edge.