Surface Plasmon Resonance and Raman Scattering Activity of the Au/AgxO/Ag Multilayer Film

The nanostructured Au/AgxO/Ag sandwich multilayer films on quartz substrates are prepared by the magnetron sputtering method. The morphology, plasmon resonance and surface enhanced Raman scattering （SERS） activi- ties of the multilayer films are studied. The resonant absorption wavelength of localized surface plasmon is tuned in a wide range from 618nm to 993nm by controlling the density of nanoparticles of Au and Ag. The SERS activity of the Au/AgxO/Ag multilayer films are enhanced over -10 times compared with those of bare Ag and bare Au films. These properties may find a potential application in biosensor and bioimaging.     

Resonance Absorption of Metallic Plate with Subwavelength Hole Array

The optical reflectance by a metallic plate arranged with array consisting of subwavelength periodic square hole is investigated by using the three-dimensional finite-difference time-domain method （3D-FDTD）. There are dips in the reflectivity spectra, which indicate the absorption peaks. The absorption peaks behave differently according to the ratio of hole width and the period of the hole array. Combined with the near fields of the absorption peaks, it is found that the surface plasmon （SP） resonance on the surface of plate and localized SP in the hole play a major role for the two absorptions.     

Surface Plasmon Resonance and Field Enhancement of Au/Ag Alloyed Hollow Nanoshells

We investigate the nanostructure, surface plasmon resonance （SPR） absorption and nonlinear enhancement of Au/Ag alloyed hollow nanoshells prepared by the replacement reaction of Ag nanoparticles in a HAuCI4 aqueous solution. As the volume of HAuCl4 increases from OmL to 0.S mL, the SPR band of the Au/Ag alloyed nanoshells is tuned from 430nm to 780nm, and the third-order nonlinear optical susceptibility is enhanced nearly by an order of magnitude, which indicates a large enhancement of local field in the Au/Ag alloyed hollow nanoshells with hole defects.     

Silver clusters insert into polymer solar cell for enhancing light absorption

As an employment of surface plasmonic effect, the consequence of insertion of a layer of Ag clusters into polymer solar cell on the enhancement of light absorption and power conversion efficiency is investigated. Optical analysis based on the finite-difference time-domain (FDTD) is performed with experiments to evaluate the effect of the interaction between the Ag clusters and incident light on light absorption in polymer solar cell. Ag clusters modify the light wave vector and the electromagnetic field inside the device is redistributed and enhanced. As a result, polymer solar cells achieve an overall increase in absorption, short-circuit current density, and power conversion efficiency.     

Self-organization effect in poly（3-hexylthiophene）： methanofullerenes solar cells

This paper studies the self-organization of the polymer in solar cells based on poly（3-hexylthiophene）： [6, 6]-phenyl C61-butyric acid methyl ester by controlling the growth rate of active layer. These blend films are characterized by UV-vis absorption spectroscopy, charge-transport dark J - V curve, x-ray diffraction pattern curve, and atomic force microscopy. The results indicate that slowing down the drying process of the wet films leads to an enhanced selforganization, which causes an increased hole transport. Increased incident light absorption, higher carrier mobility, and balanced carrier transport in the active layer explain the enhancement in the device performance, the power conversion efficiency of 3.43% and fill factor up to 64.6% are achieved under Air Mass 1.5, 100 mW/cm^2.     

Efficient up-conversion Yb~(3+), Er~(3+) co-doped Na_5Lu_9F_(32) single crystal for photovoltaic application under solar cell spectrum excitation

Yb~(3+)/Er~(3+)co-doped Na_5Lu_9F_(32) single crystals used as a spectral up-converter to improve the power conversion efficiency of perovskite solar cells are prepared via an improved Bridgman approach. Green and red up-conversion(UC) emissions under the excitation of near-infrared(NIR) bands of 900–1000 nm and1400–1600 nm can be observed. The effectiveness of the prepared materials as a spectral converter is verified by the enhancement of power conversion efficiency of perovskite solar cells. The sample with a UC layer is 15.5%more efficient in converting sunlight to electricity compared to the UC layer-free sample due to the absorption of sunlight in the NIR range. The results suggest the synthesized Yb~(3+)/Er~(3+)co-doped Na_5Lu_9F_(32) single crystals are suitable for enhancing the performance of perovskite solar cells.     

Absorption enhancement in thin film a-Si solar cells with double-sided SiO_2 particle layers

Light absorption enhancement is very important for improving the power conversion efficiency of a thin film a-Si solar cell. In this paper, a thin-film a-Si solar cell model with double-sided SiO2 particle layers is designed, and then the underlying mechanism of absorption enhancement is investigated by finite difference time domain(FDTD) simulation;finally the feasible experimental scheme for preparing the SiO2 particle layer is discussed. It is found that the top and bottom SiO2 particle layers play an important role in anti-reflection and light trapping, respectively. The light absorption of the cell with double-sided SiO2 layers greatly increases in a wavelength range of 300 nm–800 nm, and the ultimate efficiency increases more than 22% compared with that of the flat device. The cell model with double-sided SiO2 particle layers reported here can be used in varieties of thin film solar cells to further improve their performances.     

Simultaneous low extinction and high local field enhancement in Ag nanocubes

We theoretically investigate surface plasmon resonance properties in Au and Ag cubic nanoparticles and find a novel plasmonic mode that exhibits simultaneous low extinction and high local field enhancement properties. We analyse this mode from different aspects by looking at the distribution patterns of local field intensity, energy flux, absorption and charge density. We find that in the mode the polarized charge is highly densified in a very limited volume around the corner of the nanocube and results in very strong local field enhancement. Perturbations of the incident energy flux and light absorption are also strongly localized in this small volume of the corner region, leading to both low absorption and low scattering cross section. As a result, the extinction is low for the mode. Metal nanoparticles involving such peculiar modes may be useful for constructing nonlinear compound materials with low linear absorption and high nonlinearity.     

Influence of local environment on the intensity of the localized surface plasmon polariton of Ag nanoparticles

A combined Ag nanoparticle with an insulating or conductive layer structure has been designed for molecular detection using surface enhanced Raman scattering microscopy. Optical absorption studies revealed localized surface plasmon resonance, which shows regular red shift with increasing environmental dielectric constant. With the combined structure of surface enhanced Raman scattering substrates and rhodamine 6G as a test molecule, the results in this paper show that the absorption has a linear relationship with the local electromagnetic field for insulating substrates, and the electrical property of the substrate has a non-negligible effect on the intensity of the local electromagnetic field and hence the Raman enhancement.     

Nonlinear optical properties of Au/PVP composite thin films

Colloidal Au and poly（vinylpyrrolidone） （PVP） composite thin films are fabricated by spin-coating method. Linear optical absorption measurements of the Au/PVP composite films indicate an absorption peak around 530 nm due to the surface plasmon resonance of gold nanoparticles. Nonlinear optical properties are studied using standard Z-scan technique, and experimental results show large optical nonlinearities of the Au/PVP composite films. A large value of χ^（3）/α up to 0.56× 10-^10esu·cm is obtained, which is comparable to the best values reported in metal/oxlde composite films.     

Photoemission cross section:A critical parameter in the impurity photovoltaic effect

A numerical study has been conducted to explore the role of photoemission cross sections in the impurity photovoltaic(IPV) effect for silicon solar cells doped with indium. The photovoltaic parameters(short-circuit current density, opencircuit voltage, and conversion efficiency) of the IPV solar cell were calculated as functions of variable electron and hole photoemission cross sections. The presented results show that the electron and hole photoemission cross sections play critical roles in the IPV effect. When the electron photoemission cross section is 10-20cm~2, the conversion efficiencyη of the IPV cell always has a negative gain(?η 0) if the IPV impurity is introduced. A large hole photoemission cross section can adversely impact IPV solar cell performance. The combination of a small hole photoemission cross section and a large electron photoemission cross section can achieve higher conversion efficiency for the IPV solar cell since a large electron photoemission cross section can enhance the necessary electron transition from the impurity level to the conduction band and a small hole photoemission cross section can reduce the needless sub-bandgap absorption. It is concluded that those impurities with small(large) hole photoemission cross section and large(small) electron photoemission cross section,whose energy levels are near the valence(or conduction) band edge, may be suitable for use in IPV solar cells. These results may help in judging whether or not an impurity is appropriate for use in IPV solar cells according to its electron and hole photoemission cross sections.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosen- sors,novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice,these structures have obvious disadvantages.In this study,a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parame- ters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors,larger resonance angle shift,reflectance amplitude,and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Effective absorption enhancement in small molecule organic solar cells using trapezoid gratings

We demonstrate that the optical absorption is enhanced in small molecule organic solar cells by using a trapezoid grating structure. The enhanced absorption is mainly attributed to both waveguide modes and surface plasmon modes, which is simulated by using finite-difference time-domain method. The simulated results show that the surface plasmon along the semitransparent metallic Ag anode is excited by introducing the periodical trapezoid gratings, which induce the increase of high intensity field in the donor layer. Meanwhile, the waveguide modes result in a high intensity field in acceptor layer. The increase of field improves the absorption of organic solar cells significantly, which is demonstrated by simulating the electrical properties. The simulated results also show that the short-circuit current is increased by 31% in an optimized device, which is supported by the experimental measurement. Experimental result shows that the power conversion efficiency of the grating sample is increased by 7.7%.     

Performance improvement of MEH-PPV:PCBM solar cells using bathocuproine and bathophenanthroline as the buffer layers

In this work, bathocuproine (BCP) and bathophenanthroline (Bphen), commonly used in small-molecule organic solar cells (OSCs), are adopted as the buffer layers to improve the performance of the polymer solar cells (PSCs) based on poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene) (MEH-PPV): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunction. By inserting BCP or Bphen between the active layer and the top cathode, all the performance parameters are dramatically improved. The power conversion efficiency is increased by about 70% and 120% with 5-nm BCP and 12-nm Bphen layers, respectively, when compared with that of the devices without any buffer layer. The performance enhancement is attributed to BCP or Bphen (i) increasing the optical field, and hence the absorption in the active layer, (ii) effectively blocking the excitons generated in MEH-PPV from quenching at organic/aluminum (Al) interface due to the large band-gap of BCP or Bphen, which results in a significant reduction in series resistance (Rs), and (iii) preventing damage to the active layer during the metal deposition. Compared with the traditional device using LiF as the buffer layer, the BCP-based devices show a comparable efficiency, while the Bphen-based devices show a much larger efficiency. This is due to the higher electron mobility in Bphen than that in BCP, which facilitates the electron transport and extraction through the buffer layer to the cathode.     

Performance improvement cells using bathocuproine of MEH-PPV：PCBM solar and bathophenanthroline as the buffer layers

In this work, bathocuproine （BCP） and bathophenanthroline （Bphen）, commonly used in small-molecule organic solar cells （OSCs）, are adopted as the buffer layers to improve the performance of the polymer solar cells （PSCs） based on poly（2-methoxy-5-（2-ethylhexyloxy）-1,4-phenylenevinylene） （MEH-PPV）： [6,6]-phenyl-C61-butyric acid methyl ester （PCBM） bulk heterojunction. By inserting BCP or Bphen between the active layer and the top cathode, all the performance parameters are dramatically improved. The power conversion efficiency is increased by about 70% and 120% with 5-am BCP and 12-nm Bphen layers, respectively, when compared with that of the devices without any buffer layer. The performance enhancement is attributed to BCP or Bphen （i） increasing the optical field, and hence the absorption in the active layer, （ii） effectively blocking the excitons generated in MEH-PPV from quenching at organic/aluminum （Al） interface due to the large band-gap of BCP or Bphen, which results in a significant reduction in series resistance （Rs）, and （iii） preventing damage to the active layer during the metal deposition. Compared with the traditional device using LiF as the buffer layer, the BCP-based devices show a comparable efficiency, while the Bphen-based devices show a much larger efficiency. This is due to the higher electron mobility in Bphen than that in BCP, which facilitates the electron transport and extraction through the buffer layer to the cathode.     

Electric Field Enhancement of Nano Gap of Silver Prisms

Using numerical calculation, we examine the effects of gap distance of a pair of nano gap silver prisms with rounded corners on the local light intensity enhancement. Two peaks due to localized surface plasmon （LSP） excitation are observed in a wavelength range from 900nm to 300nm. The results demonstrate that peaks at a longer and a shorter wavelength corresponded to dipole-like and quadrupole-like LSP resonances, respectively. It is found that a gap distance up to 20 nm provides larger light intensity enhancement than that of a single silver nano prism with rounded corners. Furthermore, nano gap silver prisms are fabricated by direct focused ion beam processing, and we measure the scattering light spectrum of a pair of nano prisms by a confocal optical system. However, the two LSP peaks are not observed in visible range because the sizes of the nano gap and prisms are too large.     

Enhanced performance of a solar cell based on a layer-by-layer self-assembled luminescence down-shifting layer of core–shell quantum dots

In this paper, core–shell quantum dots(QDs) with two polar surface functional groups(ZnSe/ZnS–COOH QDs and ZnSe/ZnS–NH_2 QDs) are synthesized in an aqueous phase. Photoluminescence(PL) and absorption spectra clearly indicate luminescence down-shifting(LDS) properties. On the basis of QDs, surface functional group multilayer LDS films(MLDSs) are fabricated through an electrostatic layer-by-layer(LBL) self-assembly method. The PL intensity increases linearly with the number of bilayers, showing a regular and uniform film growth. When the M-LDS is placed on the surface of a Si-based solar cell as an optical conversion layer for the first time, the external quantum efficiency(EQE) and shortcircuit current density(Jsc) notably increases for the LDS process. The EQE response improves in a wavelength region extending from the UV region to the blue region, and its maximum increase reaches more than 15% between 350 nm and 460 nm.     

A polarization-insensitive fishnet/spacer/mirror plasmonic absorber for hot electron photodetection application

A polarization-insensitive plasmonic absorber is designed consisting of Au fishnet structures on a TiO_2 spacer/Ag mirror. The fishnet structures excite localized surface plasmon and generate hot electrons from the absorbed photons, while the TiO_2 layer induces Fabry–Perot resonance, and the Ag mirror acts as a back reflector.Through optimizing the TiO_2 layer thickness, numerical simulation shows that 97% of the incident light is absorbed in the Au layer. The maximum responsivity and external quantum efficiency of the device can approach 5 mA/W and ～1%, respectively, at the wavelength of 700 nm.     

A high figure of merit localized surface plasmon sensor based on a gold nanograting on the top of a gold planar film

We investigate the sensitivity and figure of merit （FOM） of a localized surface plasmon （LSP） sensor with gold nanograting on the top of planar metallic film. The sensitivity of the localized surface plasmon sensor is 317 nm/RIU, and the FOM is predicted to be above 8, which is very high for a localized surface plasmon sensor. By employing the rigorous coupled-wave analysis （RCWA） method, we analyze the distribution of the magnetic field and find that the sensing property of our proposed system is attributed to the interactions between the localized surface plasmon around the gold nanostrips and the surface plasmon polarition on the surface of the gold planar metallic film. These findings are important for developing high FOM localized surface plasmon sensors.     

Enhanced nonlinear optical absorption of Au/SiO2 nano-composite thin films

Nano metal-particle dispersed glasses are the attractive candidates for nonlinear optical material applications.Au/SiO 2 nano-composite thin films with 3 vol% to 65 vol% Au are prepared by inductively coupled plasma sputtering.Au particles as perfect spheres with diameters between 10 nm and 30 nm are uniformly dispersed in the SiO 2 matrix.Optical absorption peaks due to the surface plasmon resonance of Au particles are observed.The absorption property is enhanced with the increase of Au content,showing a maximum value in the films with 37 vol% Au.The absorption curves of the Au/SiO 2 thin films with 3 vol% to 37 vol% Au accord well with the theoretical optical absorption spectra obtained from Mie resonance theory.Increasing Au content over 37 vol% results in the partial connection of Au particles,whereby the intensity of the absorption peak is weakened and ultimately replaced by the optical absorption of the bulk.The band gap decreases with Au content increasing from 3 vol% to 37 vol % but increases as Au content further increases.