邻,间,对甲基丙烯酰胺基苯甲酸的合成、表征及荧光性能的研究

用邻氨基苯甲酸(o-ABA),间氨基苯甲酸(m-ABA),对氨基苯甲酸(p-ABA)和甲基丙烯酰氯为原料合成了邻甲基丙烯酰胺基苯甲酸(o-MAABA),间甲基丙烯酰胺基苯甲酸(m-MAABA)和对甲基丙烯酰胺基苯甲酸(p-MAABA),通过1H NMR,元素分析确认了其结构.详细考察了所得化合物的荧光性能,发现o-MAABA和p-MAABA在358 nm处有最大激发波长,而m-MAABA则在324 nm处,它们在最大激发波长下的发射波长都位于420nm左右的蓝光区域,o-MAABA强度最强,p-MAABA最弱.     

铕与苯甲酸及其衍生物配合物的光谱分析

合成了铕与苯甲酸及其衍生物(苯甲酸、邻苯二甲酸、间苯二甲酸、水杨酸、邻氨基苯甲酸、磺基水杨酸)的二元配合物.经元素分析确定其组成式.研究了它们的红外吸收光谱、紫外吸收光谱及荧光光谱.紫外光谱的研究表明,配合物的紫外吸收主要表现为配体的吸收.红外光谱的研究表明,配合物的红外光谱不同于自由配体的红外光谱,证明了稀土与有机物形成了配合物.荧光光谱的研究表明,其中铕与苯甲酸、邻苯二甲酸及间苯二甲酸形成的配合物表现出铕的特征荧光.其中以苯甲酸铕的发射峰最强,最强发射峰位于λ=618nm处,显示铕的红光特征;而铕与磺基水杨酸、邻氨基苯甲酸、水杨酸的配合物却主要表现出配体的宽带发射,其中邻氨基苯甲酸铕分别在λ=399,452,547nm处有三个弱的发射峰,磺基水杨酸铕也只在λ=407nm处有一宽发射峰,未显示出铕的红光特征.     

邻氨基苯甲酸2,2′-联吡啶铕镧混合稀土配合物的红外及荧光研究

用邻氨基苯甲酸和２,２′－联吡啶与氯化铕和氯化镧在溶液中反应,合成了混合混合稀土配合物,测定了配合物的红外光谱及荧光光谱,结果表明,稀土离子均与配体形成配合物,在３４３ｎｍ紫外光激发下,在一定范围内,用不发光的Ｌａ＾３＋离子取代邻氨基苯甲酸－２,２′联吡啶铕配合物中的Ｅｕ＾３＋离子,可以提高Ｅｕ＾３＋离子的特征发光强度,而对发射峰位影响不大,本文对发光机理进行了初探。     

聚邻甲基丙烯酰胺基苯甲酸/纳米ZnO复合物的制备及其荧光性能研究

利用原子转移自由基聚合(ATRP)法对合成的新单体邻甲基丙烯酰胺基苯甲酸(o-MAABA)进行聚合,通过核磁验证得到符合预先设计的、结构明确的聚合物,聚合物分子量为7900;将纳米ZnO引入到该聚合物P(o-MAABA)中,得到聚合物/纳米ZnO粒子复合物.用红外光谱和差热分析方法对聚合物和复合物进行了表征,并采用透射电镜(TEM)观察了复合物粒子的形貌.红外光谱表明纳米ZnO确实被引入到聚合物链中,并且与聚合物中的某些官能团发生了一定的相互作用;差热分析表明P(o-MAABA)/纳米ZnO复合物的热稳定性较原来聚合物P(o-MAABA)有所提高;TEM观察表明复合物粒子基本为球状,表面较为光滑.P(o-MAABA)/纳米ZnO复合物表现出特殊的荧光性能,与聚合物相比荧光光谱发生红移,并且复合物溶解性较好,能成膜,可望在发光材料方面得到应用.     

2,3,4-三羟基苯乙酮腙类试剂的合成及其光谱研究

用连苯三酚合成2,3,4-三羟基苯乙酮,用苯甲酸乙酯、对羟基苯甲酸甲酯与水合肼反应,合成苯甲酰肼和对羟基苯甲酰肼,然后用2,3,4-三羟基苯乙酮与苯甲酰肼、对羟基苯甲酰肼、苯肼反应,合成了三种新的2,3,4-三羟基苯乙酮腙类试剂。研究了腙类试剂的红外光谱、紫外光谱、荧光光谱特性。     

4-苯偶氮水杨醛腙类试剂的合成及其光谱研究

用苯胺与水杨醛反应合成了4-苯偶氮水杨醛,用苯甲酸乙酯、对羟基苯甲酸甲酯与水合肼反应,合成了苯甲酰肼、对羟基苯甲酰肼,然后用4-苯偶氮水杨醛与苯甲酰肼、对羟基苯甲酰肼、苯肼、异烟肼反应,合成了四种新的4-苯偶氮水杨醛腙类试剂。研究了这四种腙类试剂的红外光谱、紫外光谱、荧光光谱特性。     

铽与苯甲酸及其衍生物配合物的合成与发光特性

合成了铽与苯甲酸及其衍生物(苯甲酸、邻苯二甲酸、间苯二甲酸、水杨酸、邻氨基苯甲酸、磺基水杨酸)的配合物。经元素分析确定其组成结构式。研究了它们的红外吸收光谱、紫外吸收光谱及荧光光谱。紫外光谱的研究表明,配合物的紫外吸收主要表现为配体的吸收;红外光谱的研究表明,配合物的红外光谱不同于自由配体的红外光谱;荧光光谱的研究表明,铽与这六个配体的配合物都表现出较好的荧光性能,并发现磺基水杨酸铽配合物在本实验系列中其荧光发射最强。     

铕与苯甲酸、邻菲啰啉系列配合物的合成和光谱分析

合成了铕与苯甲酸(BA)二元配合物及铕与BA、邻菲啰啉(Phen)三元配合物,研究了配合物的红外、紫外吸收光谱及荧光光谱.紫外光谱的研究表明,配合物的紫外吸收主要表现为配体的吸收,配体吸收能量传递给中心离子Eu3+.配合物红外光谱不同于配体的红外光谱,羧基的对称伸缩振动vm (coo-)移至1418cm-1,反对称伸缩振动vaa(COO-)移至1562cm-1,表明稀土与配体之间形成了配位键;测定了配合物及其防伪油墨的荧光性能,铕与苯甲酸、邻菲啰啉形成的三元配合物表现出中心离子Eu3+的特征荧光,616nm荧光发射最强谱蜂对应Eu3+的5D0→7F2跃迁.制备的稀土荧光防伪油墨在可见光下印迹无色,在紫外灯下呈现明显红色荧光.     

2-（甲苯-4-磺酰胺基）-苯甲酸的结构、光谱与热力学性质的理论研究

在B3LYP/6-31++G^**水平对2-（甲苯-4-磺酰胺基）-苯甲酸分子进行几何构型优化和频率的计算,得到红外光谱,拉曼光谱和不同温度下的热力学性质.结果显示,该分子羧基的碳氧原子、磺酰胺基的氮原子与苯环形成不同的离域大π键,空间位阻效应和共轭效应使两个苯环不在同一平面,二面角为63.2°.使用含时密度泛函理论方法计算第一激发态的电子垂直跃迁能,得到最大吸收波长为312.7?nm,属于近紫外区,这与该分子在二氯甲烷溶剂中的实验测得值307?nm一致. 关键词： 2-（甲苯-4-磺酰胺基）-苯甲酸 光谱 热力学性质 密度泛函理论     

芳胺基硫脲类化合物的红外光谱研究

利用烃基异硫氰酸酯分别与邻肼基苯甲酸，５－溴邻肼基苯甲酸，３，５－二溴邻肼基苯甲酸的加成反应，合成了１１种未见文献报道的芳胺基硫脲烃化合物，通过对这些化合物的红外光谱的分析和比较，归属了它们的主要红外吸收峰，考察了主要吸收峰随取代基变化规律。     

油酰柠檬酸三乙酯的合成及红外光谱研究

以柠檬酸和乙醇为原料,在磷酸和苯磺酸混合催化剂作用下,加热回流,酯化生成柠檬酸三乙酯。以油酸与氯化亚砜为原料,通过酰化反应合成油酰氯。再使柠檬酸三乙酯与油酰氯在吡啶作用下,通过酰基化反应合成油酰柠檬酸三乙酯。采用红外光谱法对原料、中间体、产物进行了红外光谱测试,并进行了红外谱图的分析与比较,证明了各步产品为目的产物。根据原料、中间体、产物红外谱图中相应特征吸收峰的消失或是出现,证明了所选择的合成工艺路线是可行的。     

Vibrational spectroscopy of a compound with a CS7 ring

The product of the Asinger reaction between elemental sulfur, n‐butylamine and acetophenone is 8‐(n‐butylaminophenylmethyliden)‐1,2,3,4,5,6,7‐heptathiocane which contains a CS₇ ring. A combination of infrared, Raman and inelastic neutron scattering spectroscopies with periodic density functional theory calculations is used to provide a complete assignment of the vibrational spectra of this unusual species. The similarity between the Raman spectra of the compound and that of elemental sulfur is particularly striking. Copyright © 2009 John Wiley & Sons, Ltd.     

Quantum chemical study on gas phase decomposition of ferulic acid

Ferulic acid, representing phenolic fraction of bio-oil, is considered to be a model compound in this study for its decomposition into various end products such as ethylbenzene, eugenol, cis-isoeugenol, vanillin, 4-ethylguaiacol, guaiacol, and acetovanillone using density functional theory approach. Results of bond dissociation energies indicate that cleavage of methyl group from ferulic acid is the lowest energy-demanding bond scission amongst all 14 bond cleavages. Primary end product by decomposition of ferulic acid is found to be ethylbenzene and its production occurs through the formation of intermediate products such as 4-hydroxycinnamic acid, cinnamic acid and styrene. Demethoxylation of ferulic acid gives rise to the production of 4-hydroxycinnamic acid which further undergoes the formation of cinnamic acid by dehydroxylation reaction route. The formation of cinnamic acid in this study is carried out using three reaction schemes 1–3 and its further reduction to ethylbenzene is performed using two reaction possibilities. Finally, favourable pathway is found to be decarboxylation of cinnamic acid to produce vinylbenzene followed by the production of ethylbenzene using hydrogenation of C=C chain double bond. Furthermore, thermochemistry of each reaction scheme is performed at atmospheric pressure and at a wide range of temperature of 598–898 K.     

Synthesis and Water Absorbency Properties of Hydrogels Based on Lotus Root Starch

In order to increase the added value of lotus root starch, a new-style hydrogel was prepared by grafting copolymerization by acrylic acid (AA), 2-acrylamide-2-methylpropanesulfonic acid (AMPS), K₂S₂O₈, and N,N′- methylene-bis-acrylamide (MBA) in presence of lotus root starch. The molecular structure was characterized by Fourier transform infrared spectroscopy (FTIR). The different conditions that had an influence on the water absorbency are discussed, such as the ratio of initiator to monomers, the ratio of cross-linker to monomers, the mass ratio of AA and AMPS, the lotus root starch's mass, and the reaction temperature. For the product having the optimal water absorbency of 476 g/g, its water absorption kinetics diffusion model and equation were also researched. The material is friendly to the environment and is suggested to have significant potential to be used in various fields.     

Selectivity in metal ions mediated C–N bond formation reactions of 8‐aminoquinoline derivatives

Cyclisation reactions via C–N bond formation of 2‐bromo‐N‐(quinolin‐8‐yl)propanamide (I) and 2‐bromo‐N‐(quinolin‐8‐yl)acetamide (II) are facilitated by metal salts such as copper (+2), nickel (+2) perchlorate or nitrate and palladium (+2) acetate. Nickel (+2) perchlorate mediated reaction of I and II resulted in C–N bond formation to give corresponding perchlorate salts of three fused six‐membered heterocyclic rings. The copper (+2) mediated reactions are found to be solvent dependent for I, but independent for II. Copper mediated reaction of II gave cyclised product analogous to the one obtained from reaction of II with nickel (+2) perchlorate in methanol or ethanol. But the reaction of I with copper (+2) perchlorate in methanol gave C–N bonded methoxylated cyclised product. This reaction took place in two steps, cyclisation followed by methoxylation. The source of methoxy group is confirmed to be from methanol by deuterium labelling experiments. Whereas similar copper mediated reaction of I in ethanol led to nucleophilic substitution of bromide ion by ethoxide. The structures of the salts of fused heterocyclic compounds were determined and their fluorescence emissions were studied. The large difference in fluorescence emission of compound V formed from copper mediated reaction in ethanol from the compound VI formed from nickel mediated reaction in methanol or ethanol, this feature can be used to distinguish nickel (+2) and copper (+2) ions. The reaction of II with palladium (+2) acetate resulted in the formation of C–N bond to yield the corresponding heterocycle as bromide salt; without anion exchange. Copyright © 2011 John Wiley & Sons, Ltd.     

呋喃阿洛糖衍生物水解产物的结构确定

1,2;5,6-双-O-异丙叉基-3-C-硝甲基-α-D-呋喃阿洛糖（化合物1）在酸性条件下选择性脱除5,6-异丙叉基得到C-3位构型保持的水解产物1,2-O-异丙叉基-3-C-硝甲基-α-D-呋喃阿洛糖（化合物2）;化合物1先经过Moffatt脱水生成C-3硝基烯产物1,2;5,6-双-O-异丙叉基-3-脱氧-亚甲基硝基-α-D-呋喃木糖（化合物3）,然后在酸性条件下选择性脱除5,6-异丙叉基过程中协同发生氧杂-Michael加成反应得到C-3位构型反转的水解产物1,2-O-异丙叉基-3-C-硝甲基-α-D-呋喃葡萄糖（化合物2′）,两种产物化合物2和2′互为C-3差向异构体.通过¹H NMR、¹³C NMR、DEPT-135、¹H-¹H COSY、gHSQC和gHMBC等核磁共振（NMR）技术,对化合物2′的¹H和¹³C NMR数据进行了全归属．     

Angular optical characteristics of light scattered by double-layer metal–oxide nanoparticles

The interaction of Tb(III)-2-{[(4-methoxy benzoyl) oxy]} methyl benzoic acid binary complex with nucleosides (adenosine, cytidine, guanosine and inosine) was investigated using UV and fluorescence methods. The reaction of Tb-complex with cytidine, guanosine and adenosine is accompanied by shift to longer wavelength in the absorption band, while there is a blue shift in the absorption band with an enhancement in the molar absorptivity upon the reaction with inosine. The fluorescence intensity of Tb(III)-2-{[(4- methoxy benzoyl) oxy]} methyl benzoic acid binary complex at λ = 545 nm (5D4 → 7F5) was decreased with the addition of the nucleoside molecule following the order: cytidine > inosine > guanosine > adenosine.     

Ultrasound liberates nitric oxide (NO) from the caged NO compound N,N'-bis(carboxymethyl)-N,N'-dinitroso-p-phenylenediamine sodium salt

To determine whether nitric oxide (NO) can be released from a cage compound N,N'-bis(carboxymethyl)-N,N'-dinitroso-p-phenylenediamine sodium salt (BNN 5 Na), we sonicated different concentrations of BNN 5 Na solutions containing an NO spin trap, (MGD)2Fe2+, and then measured (MGD)2Fe2+-NO signal using electron paramagnetic resonance (EPR). We also investigated the role of cavitation by saturating the solutions with Ar, He or Xe gases before sonication. The result showed that ultrasound can liberate NO from caged NO compound at rates highest with Xe and lowest with He. These results suggest that high-temperature due to cavitations induced by ultrasound are capable of releasing NO from caged NO compounds. This finding also opens up to a new possibility for the use of ultrasound in a controlled release of active compound (e.g. drug) from its caged form for therapeutic purposes.     

A One-Pot Entry to a Novel 3-H-benzo[d]pyrazolo[1,5-b]isothiazole Ring System

Summary The phosphorus ylide obtained from the reaction between 2-aminobenzo[d]isothiazol-3-one and dimethyl acetylenedicarboxylate in the presence of triphenylphosphine undergoes a smooth intramolecular Wittig-type reaction to produce, in a one-pot reaction, 3-H-benzo[d]pyrazolo[1,5-b]isothiazole-2,3a-dicarboxylic acid dimethyl ester, a novel functionalized heterocyclic compound.     

NMR analysis of diacyl peroxide decomposition in methanol in response to temperature and microwave radiation

We have studied the decomposition of benzoyl and acetyl benzoyl peroxides in methanol-d₄ in response to temperature and microwave radiation. We have shown that chemically-induced dynamic nuclear polarization (CIDNP) can be observed even when the reactions are carried out in spectrometers with high magnetic fields. In this case, spin correlation persists in geminal radical pairs involving labile acyloxyl radicals. Regardless of the method used to initiate peroxide decomposition, the same amount of products are formed. Homolysis occurs according to a chain mechanism. The contribution of induced decomposition decreases over the course of the reaction. Dissolved oxygen molecules efficiently terminate the chain, decreasing the rate of peroxide decomposition. In the case of acetyl benzoyl peroxide, the product yield depends on the initiation mechanism: for microwave irradiation, the solvent molecules are more active while dissolved oxygen is less active than in thermolysis.