W_(20)O_(58)(010)表面氢吸附机理的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,在广义梯度近似下,研究了W_(20)O_(58)晶胞、W_(20)O_(58)(010)表面结构及其氢吸附机理.计算结果表明:W_(20)O_(58)晶体理论带隙宽度为0.8 eV,为间接带隙,具有金属性.W_(20)O_(58)晶体中W—O共振较强,以共价键居多.W_(20)O_(58)(010)表面有WO终止(010)表面和O终止(010)表面,表面结构优化后使得W—O键长和W—O—W键角改变,从而实现表面弛豫.分别计算了H_2分子吸附在WO终止(001)表面和O终止(001)表面的WO-L-O_(1c),WO-V-O_(1c),WO-L-O_(2c),WO-V-O_(2c),O-L-O_(1c)和O-V-O_(1c)六种吸附构型,其中WO-L-O_(1c),WO-V-O_(1c)和WO-L-O_(2c)这三种吸附构型不稳定;而WO-V-O_(2c),O-L-O_(1c)和O-V-O_(1c)这三种吸附构型都很稳定,H_2分子都解离成两个H原子,吸附能均为负值,分别为-1.164,-1.021和-3.11 eV.WO-V-O_(2c)吸附构型的两个H原子分别吸附在O和W原子上;O-L-O_(1c)吸附构型的两个H原子,一个与O原子成键,另一个远离了表面.其中O-V-O_(1c)吸附构型最稳定,两个H原子失去电子,为O原子提供电子.分析其吸附前后的态密度,H的1s轨道电子与O的2p,2s轨道电子相互作用,均形成了一些较强的成键电子峰,两个H原子分别与O_(1c)形成化学键,最终吸附反应生成了一个H_2O分子,同时产生了一个表面氧空位.     

NH3分子在LiH(100)表面吸附的第一性原理研究

采用第一性原理方法研究了NH3分子在LiH(100)晶面的表面吸附情况. 通过研究LiH(100) /NH3体系的吸附位置、吸附能和电子结构,发现NH3分子在Li3N (100)晶面主要是化学吸附,初始位置为NH3分子中N-H键在Li顶位时失去一个H原子,并在LiH(110)面形成NH2基,其吸附能为0.511 eV,属于强化学吸附,吸附作用最强. 此时NH2基与附近H原子和Li原子之间为离子键作用,NH2基中N—H键为共价键;NH3分子中另一个H原子与LiH表面的一个H原子形成一个H2分子逸出表面. H2分子中H-Ｈ键为明显的共价键.     

三氧化钨表面氢吸附机理的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,在广义梯度近似下,研究了立方WO_3,WO_3(001)表面结构及其氢吸附机理.计算结果表明立方晶体WO_3理论带隙宽度为0.587 eV.WO_3(001)表面有WO终止(001)表面和O终止(001)表面两种结构,表面结构优化后W—O键长和W—O—W键角改变,从而实现表面弛豫;WO终止(001)表面和O终止(001)表面分别呈现n型半导体特征和p型半导体特征.分别计算了H原子吸附在WO终止(001)表面和O终止(001)表面的H—O_(2c)—H,H—O_(2c)…H—O_(2c),H—O_(1c)—H和H—O_(1c)…H—O_(1c)四种吸附构型,其中H—O_(1c)—H吸附构型的吸附能最小,H—O键最短,H失去电子数最多,分别为-3.684 eV,0.0968 nm和0.55e,此吸附构型最稳定.分析其吸附前后的态密度,带隙从吸附前的0.624 eV增加到1.004 eV,价带宽度基本不变.H的1s轨道电子与O的2p,2s轨道电子相互作用,在-8和-20 eV附近各形成了一个较强的孤立电子峰,两个H原子分别与一个O_(1c)原子形成化学键,最终吸附反应生成了一个H_2O分子,同时产生了一个表面氧空位.     

NH3分子在LiH（100）表面吸附的第一性原理研究

采用第一性原理方法研究了NH₃分子在LiH（100）晶面的表面吸附情况.通过研究LiH（100）/NH₃体系的吸附位置、吸附能和电子结构,发现NH₃分子在LiH（100）晶面主要是化学吸附,初始位置为NH₃分子中N-H键在Li顶住时失去一个H原子,并在LiH（100）面形成NH₂基,其吸附能为0.511 eV,属于强化学吸附,吸附作用最强.此时NH₂基与附近H原子和Li原子之间为离子键作用,NH₂基中N—H键为共价键;NH₃分子中另一个H原子与LiH表面的一个H原子形成一个H₂分子逸出表面.H₂分子中H-H键为明显的共价键.     

N2H4在NiFe(111)合金表面吸附稳定性和电子结构的第一性原理研究

采用基于色散校正的密度泛函理论进行了第一性原理研究, 详细分析了肼(N₂H₄)在Ni₈Fe₈/Ni(111)合金表面稳定吸附构型的吸附稳定性和电子结构及成键性质. 通过比较发现, 肼分子以桥接方式吸附在表面的两个Fe原子上是最稳定的吸附构型, 其吸附能为-1.578 eV/N₂H₄. 同时发现, 肼分子在这一表面上吸附稳定性的趋势为: 桥位比顶位吸附更有利, 且在Fe原子上比在Ni原子上的吸附作用更强. 进一步分析了不同吸附位点上稳定吸附构型的电子结构、电荷密度转移以及电子局域化情况. 结果发现: 相同吸附位点的电子态密度图基本一致, 并且N原子的p轨道和与之相互作用的表面原子的d轨道之间存在态密度上的重叠; 吸附后电荷密度则主要从肼分子转移到表面原子之上; 在电子局域化函数切面图中也发现吸附后电子被局域到肼分子的N原子和相邻的表面原子之间. 这些电子结构的表征都充分说明肼分子与表面原子之间通过电荷转移形成了强烈的配位共价作用.     

LiH晶体在空气中腐蚀的理论研究

用CASTEP软件包中的GGA/RPBE基组,采用平面波超软赝势方法,计算了空气中主要成分H2O、O2、CO2、HCl、N2在LiH表面的最佳吸附方式,优化结构后的离解能、布居数和态密度.由吸附前后的态密度(DOS)图和电子转移数可知,H2O、O2发生的是化学吸附,CO2、HCl、N2发生的是物理吸附.     

Aun(n=2,3,4)团簇与乙醇分子相互作用的第一性原理研究

利用密度泛函理论研究了Au_n(n=2,3,4)团簇与乙醇分子的吸附机理.研究结果表明:Au_n(n=2,3,4)团簇分别能够吸附1到n个乙醇分子,生成Au_n-(C₂H₆O)_1-n配合物;Au₄团簇吸附乙醇分子有多种构型,通过分析吸附能和Mulliken电荷分布,确定了4个乙醇分子的吸附顺序及相应的稳定构型;Au_n(n=3,4)团簇在吸附最后一个乙醇分子时改变了前面Au—O成键的作用模式,而是选择Au—H成键;作为吸附主体的金团簇和被吸附的乙醇分子在吸附前后构型变化都很少,它们之间的吸附作用为弱相互作用. 关键词： 金团簇 乙醇分子 密度泛函理论     

LiH晶体在空气中腐蚀的理论研究

用CASTEP软件包中的GGA／RPBE基组，采用平面波超软赝势方法，计算了空气中主要成分H2O、O2、CO2、HCl、N2在LiH表面的最佳吸附方式，优化结构后的离解能、布居数和态密度．由吸附前后的态密度（DOS）图和电子转移数可知，H2O、O2发生的是化学吸附，CQ、HCl、N2发生的是物理吸附．     

H2O在SrTiO3-(001)TiO2表面上吸附和解离的密度泛函理论研究

利用密度泛函理论研究了0.25单层(ML),0.5ML,0.75ML和1ML吸附率下H2O在SrTiO3-(001)TiO2表面上的吸附行为.比较了不同吸附率下分子吸附和解离吸附的稳定性,利用微动弹性带(nudged elastic band)方法计算了H2O的解离势垒.结果表明:在低吸附率(0.25ML和0.5ML)时,H2O表现为解离吸附;在0.75ML吸附率下,分子吸附和解离吸附同时存在;而在全吸附(吸附率为1ML)时,分子吸附更稳定.基于对H2O分子与表面之间以及H2O分子之间的电荷转移和相互作用的分析,讨论了吸附率对H2O吸附和解离的影响.     

CO在尖晶石结构CuCr2O4(111)表面上的吸附理论研究

采用密度泛函理论，研究了CO在具有尖晶石结构的过渡金属氧化物CuCr2O4(100)表面上的吸附. 几何构型优化结果表明，CO倾向于以碳端吸附在Cu原子上，吸附能达到133.2 kJ/mol. 吸附在五配位的Cr原子上也比较稳定，吸附能为57.5 kJ/mol. 吸附后，C-O键伸长，振动频率出现红移，表明分子被活化. 同时分析了吸附前后态密度的变化，探讨了CO与底物的成键机理.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.