飞机跑道胶痕的自动识别系统设计与实现

为了减轻机场跑道除胶工作人员的劳动强度,提高除胶工作效率,文章提出了一种基于机器视觉的胶痕自动查找和识别方法,设计了基于ARM单片机控制的图像无线采集和基于PC机控制的图像接收、图像预处理和图像识别系统。文章通过分析预处理后的数据特点,确定了基于细胞神经网络算法的胶痕识别算法,然后在MATLAB仿真环境下确定了该算法的最优模型和参数,最后在Visual C++ 6.0环境下完成了该算法的程序编译,调试并完成了对胶痕的自动识别过程。理论仿真和程序测试的结果证明了文章提出的方法在胶痕自动识别系统中的可行性,也为机场特种设备的无人化和智能化提供了参考。     

Effects of RE2O3 (RE = Tm, Sc, Yb) addition on the superconducting properties of ErBa2Cu3Oy

We investigated the effects of added Tm₂O₃, Sc₂O₃, and Yb₂O₃ on the superconducting properties of sintered Er123 samples. Tm₂O₃ addition caused the least T_c degradation, exhibiting a T_c above 90 K even for 17 vol% addition. Samples with added Sc₂O₃ maintained a T_c at above 90 K up to an addition of 7.2 vol%, while Yb₂O₃-containing samples showed a monotonic decrease in T_c with increased vol% of added Yb₂O₃. Tm₂O₃-containing samples exhibited a slight increase in J_c(0.1 T)/J_c(0) and had constant J_c values even for 17 vol% addition. XRD and SEM results indicate that the Tm₂O₃ is very stable in the superconducting matrix.     

The stability, frontier orbitals, bond character, and static linear polarizability of the fluorinated fullerene H20@C80F60

This paper uses the density functional theory under generalised gradient approximation to analyse the stability,frontier orbitals,bond character,and static linear polarizability of H20@C80F60,which has not been isolated,as well as those of the synthesised H 20 @C 80 H 60.The H20@C80F60 should be considerably stable by analysing its energy and aromaticity.The inside H and outside X will play different role in the chemical reaction involving H 20 @C 80 X 60(X=H and F).The covalence of C-H bond is in the order that the inside C-H bond of H20@C80F60 > the inside C-H bond of H 20 @C 80 H 60 > the outside C-H bond of H 20 @C 80 H 60,whereas the C-F bond of H20@C80F60 have both the covalent and ionic characters.The static linear polarizabilities of C 80 and H 20 @C 80 X 60(X=H and F) are all isotropic.     

XPS investigation of diffusion of two-layer ZrO2/SiO2 and SiO2/ZrO2 sol–gel films

Two-layer ZrO₂/SiO₂ and SiO₂/ZrO₂ films were deposited on K9 glass substrates by sol–gel dip coating method. X-ray photoelectron spectroscopy (XPS) technique was used to investigate the diffusion of ZrO₂/SiO₂ and SiO₂/ZrO₂ films. To explain the difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films, porous ratio and surface morphology of monolayer SiO₂ and ZrO₂ films were analyzed by using ellipsometry and atomic force microscopy (AFM). We found that for the ZrO₂/SiO₂ films there was a diffusion layer with a certain thickness and the atomic concentrations of Si and Zr changed rapidly; for the SiO₂/ZrO₂ films, the atomic concentrations of Si and Zr changed relatively slowly, and the ZrO₂ layer had diffused through the entire SiO₂ layer. The difference of diffusion between ZrO₂/SiO₂ and SiO₂/ZrO₂ films was influenced by the microstructure of SiO₂ and ZrO₂.     

Relation between highT c superconductivity and structure: A study of Ba3+x Cu6O14+δ and YBa2Cu3O7−δ systems

Superconductivity is found in tetragonal La_3−x Ba_3+x Cu₆O_14+δ and La, Ba)_6−x Sr _x Cu₆O_14+δ even though they do not possess Cu-O chains or the K₂NiF₄ structure. Resistivity measurements confirm the occurrence of a transformation from chain-superconductivity to sheet-superconductivity in YBa₂Cu₃O_7−δ as δ is varied in the range 0.0–0.5. Contribution No. 481 from the Solid State and Structural Chemistry Unit     

Novel 1122 thallium cuprates showing high Tc superconductivity: TlCa1-xY,Ba2Cu2O y,T,1-xPb x CaSr2Cu2O y and TlCa0.5Ln0.5Sr2Cu2O y

Substitution of Ca by Y in TlCaBa₂Cu₂O _y does not favour superconductivity, but substitution of Tl by Pb or of Ca by Ln (Ln = Y or rare earth) in TlCaSr₂Cu₂O _y results in high T_c superconductivity (T_c π 60–90 K). TlCa_1-xLn _x Sr₂Cu₂O _y is a new series of high T_c superconductors, but the x = 0.0 composition does not exhibit bulk superconductivity.     

X-ray study on the phase transitions in triammonium hydrogen disulfate crystals and deuterated crystals

The structural phase transitions in triammonium hydrogen disulfate crystals and deuterated crystals below room temperature have been studied by X-ray diffraction. Three phases are observed in the temperature range from 25°C down to — 160°C. The space groups in three different phases are identified as C2/c, P2/n (or Pn), and C2 for (NH₄)₃H(SO₄)₂ and (ND₄)₃D(SO₄)₂ crystals. No isotope effect on the structural phase transitions in these crystals could be detected by these studies. The occurrence of structural phase transitions caused by the reorientation of SO₄ groups and/or the shift of oxygen atoms from the sulfate atom in the SO₄ group are suggested from the diffraction photographs.     

DSC study of superionic phase transition in (NH4)4H2(SeO4)3 single crystals

DSC and complex impedance studies of the protonic conductor (NH₄)₄H₂(SeO₄)₃, which undergoes a superionic phase transition of first order at T_s = 378 K show that the activation energy of ionic conductivity d(lg σ)/dt and the ordering enthalpy ΔC_p of the crystal are proportional: d(lg σ)/dT = XΔC_p/RT_s + const, as found for MAg₄I₅ crystals undergoing a second-order superionic phase transition. Thus the short-range order environment of the species involved in fast-ion transport plays the main role in the superionic phase transition. This is also supported by the value of the entropy change at T_s, ΔS = 43 J/mole·K. A new metastable phase was found to be induced on heating the (NH₄)₄H₂(SeO₄)₃ crystal above T_s.     

Synthesis,crystal structure and magnetic properties of Yb8Ag18.5Al47.5, Yb2Pd2Cd and Yb1.35Pd2Cd0.65

We report the synthesis of three new Yb-based compounds, Yb₈Ag_18.5Al_47.5 (Yb₈Cu₁₇Al₄₉-type, tetragonal tI74–I4/mmm), Yb₂Pd₂Cd (Mo₂B₂Fe-type, tetragonal tP10-P4/mbm) and Yb_1.35Pd₂Cd_0.65 (MnCu₂Al-type, cubic cF16–Fm3¯m). The crystal symmetry of these compounds has been determined and the complete structural characterisation carried out by single crystal and powder diffraction techniques. Two symmetry in-equivalent sites are available for the Yb ions in Yb₈Ag_18.5Al_47.5 and Yb_1.35Pd₂Cd_0.65. The 4f levels of the Yb ions are appreciably hybridised in Yb₈Ag_18.5Al_47.5 and to a lesser extent in Yb₂Pd₂Cd as inferred from the magnetisation and heat capacity data. Signatures of heavy fermion behaviour are observed in the heat capacity data of Yb₂Pd₂Cd in which the heat capacity, C/T, increases at low temperatures attaining a value of ≈600 mJ/mol K² at 1.8 K. The electrical resistivity of Yb₂Pd₂Cd follows a linear variation with temperature, T, between 1.4 and 5 K, thus indicating a possible non-Fermi liquid behaviour. In contrast, Yb ions are trivalent in Yb_1.35Pd₂Cd_0.65 and order magnetically near 1.4 K.     

Melting and subsolidus phase relations in the system K2CO3–MgCO3 at 3 GPa

ABSTRACT

As part of an investigation of carbonate systems under mantle pressures and temperatures, phase relations in the K₂CO₃–MgCO₃ system have been studied at 3?GPa and 800–1300°C. Subsolidus assemblages comprise the stability fields of K₂CO₃?+?K₂Mg(CO₃)₂ and K₂Mg(CO₃)₂?+?MgCO₃ with the transition boundary near 50?mol% K₂CO₃ in the system. The K₂CO₃–K₂Mg(CO₃)₂ eutectic is located at 840°C and 52?mol% K₂CO₃. The K₂CO₃ content in the melt coexisting with potassium carbonate increases to 85?mol% as temperature increases to 1050°C. K₂CO₃ remains solid up to 1250 and melts at 1300°C. K₂Mg(CO₃)₂ melts incongruently at 890°C to produce magnesite and a liquid containing 51?mol% K₂CO₃. As temperature increases to 1300°C, the K₂CO₃ content in the liquid coexisting with magnesite decreases to 27?mol%.     

Calculated Vibrational Frequencies of PMo12O40 3- and its Fragments

Calculated vibrational frequencies are reported for the PMo₁₂O₄₀ ^3– ion according to a 53-atomic tetrahedral model (T_d). The results are compared with calculated frequencies for fragments of this structure, viz. PO₄ (T_d), Mo₃O₁₃ (C_3v), Mo₃O₇ (C_3v, Mo₂O₁₁ (C_s) and Mo₂O₁₀ (C_s).

A complete vibrational analysis of the PMo₁₂O₄₀ ^3– ion has been performed. The adopted model of T_d symmetry is an idealization of x-ray structure data. 1 The normal modes of vibration according to this model are distributed as:     

A new high-pressure polymorph of Ti2O3: implication for high-pressure phase transition in sesquioxides

The post-corundum phase transition has been investigated in Ti₂O₃ on the basis of synchrotron X-ray diffraction in a diamond anvil cell and transmission electron microscopy. The new polymorph of Ti₂O₃ was found at about 19 GPa and 1850 K, and this phase was stable even at about 40 GPa. A new polymorph of Ti₂O₃ can be indexed on a Pnma orthorhombic cell, and the unit-cell parameters are a=7.6965 (19) Å, b=2.8009 (9) Å, c=7.9300 (23) Å, V=170.95 (15) Å³ at 19 GPa, and a=7.8240 (2) Å, b=2.8502 (1) Å, c=8.1209 (3) Å, V=181.10 (1) Å³ at ambient conditions. The Birch–Murnaghan equation of state yields K ₀=206 (3) GPa and K′₀=4 (fixed) for corundum phase, and K ₀=296 (4) GPa and K′₀=4 (fixed) for the post-corundum phase. The molar volume decreases by 12% across the phase transition at around 20 GPa. The structural identification was carried out on a recovered sample by the Rietveld method, and a new polymorph of Ti₂O₃ can be identified as Th₂S₃-type rather than U₂S₃-type structure. The transition from corundum-type to Th₂S₃-type structure accompanies the drastic change of the form of polyhedron: from TiO₆ octahedron in the corundum-type to TiO₇ polyhedron in the Th₂S₃-type structures.     

Phase diagram and domain structure of the Rb2 x Tl2(1− x )Cd2(SO4)3 solid solutions

From measurements of temperature dependences of the birefringence and from observations of the domain structure the x, T–phase diagram for the Rb_{2 x} Tl_{2(1? x )}Cd₂(SO₄)₃ solid solutions have been obtained. Ferroelastic domain structure and movement of phase boundaries have been studied in the course of phase transitions in Rb_{2 x} Tl_{2(1? x )}Cd₂(SO₄)₃ crystals. Possible reasons for the appearance of mechanically non-compatible (‘forbidden’) ferroelastic domain walls are given.     

相变存储材料Ge1Sb2Te4和Ge2Sb2Te5薄膜的结构和电学特性研究

采用射频磁控溅射方法制备了两种用于相变存储器的Ge₁Sb₂Te₄和Ge₂Sb₂Te₅相变薄膜材料,对其结构、电学输运性质和恒温下电阻随时间的变化关系进行了比较和分析.X射线衍射(XRD)和原子力显微镜(AFM)的结果表明:随着退火温度的升高,Ge₁Sb₂Te₄薄膜逐步晶化,由非晶态转变为多晶态,表面出现均匀的、 关键词： 硫系相变材料 1Sb₂Te₄')" href="#">Ge₁Sb₂Te₄ 2Sb₂Te₅')" href="#">Ge₂Sb₂Te₅     

Optical properties of Mn-activated Na2SnF6 and Cs2SnF6 red phosphors

Alkaline hexafluorostantanate red phosphors Na₂SnF₆:Mn⁴⁺ and Cs₂SnF₆:Mn⁴⁺ are synthesized by chemical reaction in HF/NaMnO₄ (CsMnO₄)/H₂O₂/H₂O mixed solutions immersed with tin metal. X-ray diffraction patterns suggest that the synthesized phosphors have a tetragonal symmetry with the space group D_4h¹⁴ (Na₂SnF₆:Mn⁴⁺) and a trigonal symmetry with the space group D_3d³ (Cs₂SnF₆:Mn⁴⁺). Photoluminescence (PL) analysis, PL excitation (PLE) spectroscopy, and the Raman scattering techniques are used to investigate the optical properties of the phosphors. The Franck-Condon analysis of the PLE data yields the Mn⁴⁺-related optical transitions to occur at ∼2.39 and ∼2.38 eV (⁴A_2g→⁴T_2g) and at ∼2.83 and ∼2.76 eV (⁴A_2g→⁴T_1g) for Na₂SnF₆:Mn⁴⁺ and Cs₂SnF₆:Mn⁴⁺, respectively. The crystal field parameters (Dq) of the Mn⁴⁺ ions in the Na₂SnF₆ and Cs₂SnF₆ hosts are determined to be ∼1930 and ∼1920 cm⁻¹, respectively. Temperature-dependent PL measurements are performed from 20 to 440 K in steps of 10 K, and the obtained results are interpreted by taking into account the Bose-Einstein occupation factor. Comprehensive discussion is given on the phosphorescent properties of a family of Mn⁴⁺-activated alkaline hexafluoride salts.     

The nature of antimony-enriched surface layer of Fe-Sb mixed oxides

Antimony segregation is a common feature in Fe-Sb mixed oxides, which have been widely applied as catalysts in selective oxidation and ammoxidation reactions. This paper attempts to shed a light on the cause of such a common feature and on the nature of the antimony-enriched surface layer over FeSbO₄ by means of XPS surface analysis. Single-phase FeSbO₄ samples prepared by different methods were studied, and the antimony in their surface layer is a mixture of both Sb⁵⁺ and Sb³⁺ rather than single Sb⁵⁺. Their surface composition is close to FeSb₂O₆, which could be described as (FeSbO₄)(Sb₂O₄)_δ, δ = 0.5, and it is not “Fe(II)Sb(V)₂O₆” as suggested in literature. Fe-Sb mixed oxides with Sb/Fe > 1 (mol/mol) are mixtures of FeSbO₄ and Sb₂O₄, and the surface of FeSbO₄ grains would be a layer of (FeSbO₄)(Sb₂O₄)_δ, δ ≥ 0.5. Fe-Sb mixed oxides with Sb/Fe < 1 are mixtures of FeSbO₄ and Fe₂O₃, and the surface of FeSbO₄ grains would be a layer of (FeSbO₄)(Sb₂O₄)_δ, δ ≤ 0.5, but the remaining Fe₂O₃ would be encapsulated by a layer of FeSbO₄.     

Magneto-transport properties of La0.7Ca0.3MnO3/SrTiO3/La0.7Ce0.3MnO3 tunnel junction

Hole-doped rare-earth manganite La_0.7Ca_0.3MnO₃ and the electron-doped manganite La_0.7Ce_0.3MnO₃ both show a metal-insulator transition around 250 K associated with a ferromagnetic transition and colossal magnetoresistance. In an earlier publication we have reported the rectifying characteristic of La_0.7Ca_0.3MnO₃/SrTiO₃/La_0.7Ce_0.3MnO₃ tunnel junction at room temperature, showing that it is possible to fabricate a diode out of the polaronic insulator regime of doped manganites. Here we report the magneto-transport properties of such a tunnel junction above and below the metal-insulator transition. We show, from the large positive magnetoresistance of the tunnel junction at low temperature, that La_0.7Ce_0.3MnO₃ could be a minority spin carrier ferromagnet. The implication of this observation is discussed.     

Electronic band structure and Fermi surface of new low-temperature Ni-based superconductors: 3.3 K (Ni2P2)(Sr4Sc2O6) and 2.7 K (Ni2As2)(Sr4Sc2O6) from first principles

Based on first-principle FLAPW-GGA calculations, we have investigated structural and electronic properties of the recently synthesized tetragonal (space group P4/nmm) nickel-based pnictide oxide superconductors: 3.3 K (Ni₂P₂)(Sr₄Sc₂O₆) and 2.7 K (Ni₂As₂)(Sr₄Sc₂O₆). Optimized structural data, electronic bands, total and partial densities of states, and Fermi surface topology have been obtained and discussed in comparison with available experiments and with their Fe-based (Fe₂P₂)(Sr₄Sc₂O₆) and (Fe₂As₂)(Sr₄Sc₂O₆) analogs.     

Luminescent properties of KGd1−x(WO4)2:Eux and KGd1−x(WO4)2−y(MoO4)y:Eux phosphors in UV-VUV regions

KGd_1−x(WO₄)_2−y(MoO₄)_y:Eu³⁺_x(0.1?x?0.75, y=0 and 0.2) phosphors are synthesized through traditional solid-state reaction and their luminescent properties in ultraviolet (UV) and vacuum ultraviolet (VUV) regions are investigated. Under 147 nm excitation, these phosphors show characteristic red emission with good color purity. In order to improve their emission intensity, the MoO₄²⁻ (20 wt%) is introduced into the anion of KGd_1−x(WO₄):Eu³⁺_x. The Mo⁶⁺ and Eu³⁺ co-doped KGd(WO₄)₂ phosphors show higher emission intensity in comparison with the singly Eu³⁺-doped KGd(WO₄)₂ in VUV region. The chromaticity coordination of KGd_0.45(WO₄):Eu³⁺_0.55 is (x=0.669, y=0.331), while that of KGd_0.45(WO₄)_1.8(MoO₄)_0.2:Eu³⁺_0.55 is (x=0.666, y=0.334) in VUV region.     

Thermally stimulated luminescence from alkaline earth borates

The thermally stimulated luminescence from XB₂O₄ (X=Ca,Sr,Ba) has been investigated. The results on CaB₂O₄ and SrB₂O₄ are being reported here for the first time. In both cases, the emission is found to be quite intense, contrary to the case with BaB₂O₄. The presence of two peaks in the glow curves is noted over the temperature range of 300-570 K. The emission spectra corresponding to both the peaks have been observed to be identical, consisting of two broad emissions, one in the UV and other in the blue-green regions. The emission is apparently quite different from that of BaB₂O₄ in which case only very weak emission spreading over a broad wavelength range around 410 nm is observed. This result has been understood in terms of the overlap between the excitation and the emission spectra.