氧压对Ba0.6Sr0.4TiO3薄膜晶格常数的影响及BaTiO3/Ba0.6Sr0.4TiO3超晶格的制备

采用脉冲激光沉积(PLD)技术,经一系列的优化实验成功地制备了BaTiO₃(BT)和Ba_0.6Sr_0.4TiO₃(BST)单层膜.X射线衍射分析表明,在LaAlO₃(001)单晶平衬底上生长的BT和BST薄膜都是沿[001]取向的近外延生长.且随着氧压在10^-3—25 Pa范围内逐渐增大,BST薄膜的晶格常数与氧压之间近似满足Boltzmann函数关系.其次,在此优化条件下还 关键词： 超晶格 晶格常数 激光感生热电电压 脉冲激光沉积     

Sr掺杂Eu1-xSrxMnO3体系的磁相变以及输运特性研究

对Eu_1-xSr_xMnO₃ (ESMO, x=0—1)体系的结构和磁性进行了系统的研究,结果表明Sr的掺入使EuMnO₃反铁磁母体的磁结构发生巨大的变化.通过磁化和电输运测量,深入探讨了高掺杂浓度Eu_0.4Sr_0.6MnO₃和Eu_0.3Sr_0.7MnO_{3关键词： 1-x}Sr_xMnO₃体系')" href="#">Eu_1-xSr_xMnO₃体系 Sr掺杂 可变程跳跃模型     

择优取向MgO缓冲层上制备的硅基Ba0.7Sr0.3TiO3薄膜的结构和性能研究

分别采用sol-gel法和磁控溅射法在Si（001）单晶衬底上制备出（111）和（001）取向的MgO缓冲层薄膜,随后在其上生长Ba_0.7Sr_0.3TiO₃（BST30）铁电薄膜.通过X射线衍射,扫描电子显微镜,原子力显微镜等方法研究了薄膜的微结构.实验结果发现,在较厚的MgO（001）缓冲层上可长出（101）取向的BST30薄膜,而在较薄的MgO（111） 缓冲层上则表现出（101）和（111）取向相互竞争的现象,随着MgO（111）缓冲 关键词： 0.7Sr_0.3TiO₃')" href="#">Ba_0.7Sr_0.3TiO₃ 铁电薄膜 择优取向 sol-gel     

溶胶-凝胶法制备的Ba0.8Sr0.2TiO3薄膜的结构及铁电性质研究

采用0.05mol/L的前驱体溶液,利用溶胶-凝胶法成功制备了室温下具有优良铁电性质的Ba_0.8Sr_0.2TiO₃ (BST)薄膜.X射线衍射分析表明,制得的BST薄膜室温下呈四方相,场发射扫描电子显微观测显示BST薄膜表面平整、致密、无裂纹出现,薄膜晶粒呈柱状结构、尺寸在150nm左右.电学测量表明制备的BST薄膜室温下具有优良的铁电性能.薄膜的剩余极化P_r约为35μC/cm²,矫顽电场E关键词：     

Ba0.5Sr0.5TiO3有序构型的第一性原理研究

采用第一性原理计算了Ba_0.5Sr_0.5TiO₃三种有序构型的晶格结构和对应的电子结构,晶格结构的详细分析结果表明BST{100}有序构型为四方相,Ti-O八面体中Ti原子和Ba-Sr平面上的O原子沿[100]方向分别偏心位移0.040 Å和0.065 Å,八面体畸变导致反平行自发极化出现,构型处于反铁电态. BST{110}构型也是四方相,并且(110)和(1 关键词： 钛酸锶钡 第一性原理 有序结构 铁电性     

锰位铁掺杂La0.67Sr0.33FexMn1-xO3薄膜的光诱导效应

分别采用溶胶-凝胶法和脉冲激光沉积的方法制备了La_067Sr_033Fe_xMn_1-xO₃(x=0, 005, 010, 015)系列块材和薄膜,研究了Fe部分替代对La_067Sr_033Fe_xMn_1-xO₃薄膜 关键词： 光诱导 Fｅ掺杂 晶格效应     

(Fe1-xCox)3BO5纳米棒磁性的研究

本文采用高温有机溶剂法制备了(Fe_1-xCo_x)₃BO₅纳米棒, 通过控制反应物中乙酰丙酮钴的含量合成了不同Co含量的(Fe_1-xCo_x)₃BO₅. 利用高分辨透射电子显微镜(HRTEM)、超导量子干涉磁强计(SQUID)对其形貌和磁性能进行了表征. 高分辨透射电子显微镜结果表明制备出的纳米(Fe_1-xCo_x)₃BO₅为多晶棒状, 且具有多折孪晶结构; 磁性测量的结果表明,(Fe_1-xCo_x)₃BO₅纳米棒在室温下表现出铁磁性, 随着Co含量的增加, 纳米棒的铁磁性逐渐增加, 该纳米棒有望用来研究生物大分子的机械性能.     

Zn掺杂p型Ba8Ga16ZnxGe30－x笼合物的合成及热电性能

用熔融法结合放电等离子烧结方法合成了Zn掺杂单相p型Ge基Ⅰ型笼合物Ba₈Ga₁₆Zn_xGe_30-x(x=3, 4, 5, 6)，探索Zn取代Ge对其热电性能的影响规律，结果表明：所制备的Ba₈Ga₁₆Zn_xGe_30-x化合物为p型传导，随Zn取代量x关键词： p型笼合物 合成 热电性能     

面向宽温域功能器件的连续组分外延铁电薄膜

Ba_xSr(1–x)TiO₃ (BST)铁电薄膜因为拥有高介电常数、强电场调谐性和较低的微波频段介电损耗可应用于微波可调谐器件.然而铁电材料中普遍存在的介电常数-温度依赖性使得常规单组分铁电薄膜的高可调率温区受制于相变温度,难以满足宽温域适用性的需求.为研究可用于宽温域功能器件的铁电薄膜,采用脉冲激光沉积(PLD)技术制备了单组分Ba_0.5Sr_0.5TiO₃薄膜、Ba_0.2Sr_0.8TiO₃薄膜以及Ba_0.2Sr_0.8TiO₃/Ba_0.5Sr_0.5TiO₃异质结构薄膜.通过对比其介电性能,发现垂直方向上Ba/Sr组分分布可有效改善BST薄膜的温度依赖性,然而异质结构的构建可能带来界面问题,同时也使其品质因子难以提升.本文提出采用独特的水平方向连续组分薄膜制备技术制备BST组合薄膜,有...     

Cd掺杂p型Ge基Ba8Ga16CdxGe30-x Ⅰ型笼合物的结构及热电特性

以Cd作为掺杂元素,用熔融法结合放电等离子体烧结（SPS）技术制备了具有不同Cd含量的Ba₈Ga₁₆Cd_xGe_30-x（x=0.95, 1.00, 1.05, 1.10） Ⅰ型笼合物,研究了Cd掺杂对其结构及热电性能的影响.Rietveld结构解析表明所制备的Ba₈Ga₁₆Cd_xGe_{30- 关键词： p型笼合物 结构 热电性能}     

Dielectric properties Ca-substituted barium strontium titanate ferroelectric ceramics

The dielectric and ferroelectric properties of Ba_1−xSr_xTiO₃ (BST) (x=0.10,0.20,0.30,0.40 and 0.60) ceramics and Ba_1−2xSr_xCa_xTiO₃ (BSCT) (x=0.10,0.20,0.30) ceramics have been investigated. The low temperature phase transitions of BST ceramics vanish after Ca²⁺ substitution while the high temperature transition is diffused and relaxed, which becomes more obvious with increasing x. Ca²⁺ substitution obviously decreases the dielectric constant maximum, K_m, of BST ceramics and changes the temperature of dielectric constant maximum, T_m, of BST ceramics. The shift of T_m in BST is attributed mainly to the Sr²⁺ and Ba²⁺ concentration. BST ceramics exhibit almost normal ferroelectric characteristics, while a typical relaxor behavior was observed in BSCT ceramics. The relaxor behavior observations may be understood by a random electric field induced domain state.     

The ac conductivity and complex impedance of CuO-doped (Ba0.5Sr0.5)TiO3 ceramic

The AC conductivity and complex impedance spectroscopy of CuO-doped (Ba_0.5Sr_0.5)TiO₃ ceramic were investigated. X-ray diffraction analysis showed that CuO-doped (Ba_0.5Sr_0.5)TiO₃ has a perovskite structure without any pyrochlore phase. Frequency dependent dielectric permittivity was discussed at a different temperature range. The activation energy was calculated and discussed through the Arrehnius equation from the ac conductivity with different frequency plots. CuO-doped (Ba_0.5Sr_0.5)TiO₃ ceramics have a negative temperature coefficient of resistivity. Dependence of impedance spectroscopy on frequency and temperature showed that the conduction process in the CuO-doped (Ba_0.5Sr_0.5)TiO₃ ceramic follows the thermally activated conduction mechanism.     

Structural and dielectric characterization of Sr substituted Ba(Zr,Ti)O<Subscript>3</Subscript> based functional materials

Single phase Sr substituted BaZr_0.1Ti_0.9O₃ (also known as BZT) ceramics with a formula Ba_1-xSr_xZr_0.1Ti_0.9O₃ (x=0.10, 0.20, 0.30, 0.40 and 0.50) are prepared using a solid state reaction of mixed oxides at 1250 °C for 15 h. Analysis of XRD patterns of the ceramic powders show that Sr substitutes into Ba sites and reduces the lattice parameter. The powders are sintered at 1600 °C for 6 h to investigate the microstructure and functional properties. It is found that strontium substitution significantly modifies the microstructure and greatly influences the dielectric properties. The increase in Sr content reduces the ceramic grain size and results in spherical grains. With an increase in Sr content, the Curie temperature is lowered, and the relative permittivity maximum is increased and broadened. In Ba_1-xSr_xZr_0.1Ti_0.9O₃ with x=0.30, the relative permittivity reached a maximum of 26600 and with further increase of Sr content, the relative permittivity is lowered and the phase transition is found to be broad and diffused. The ferroelectric hysteresis characteristics are discussed in detail. PACS 77.84.-s; 77.80.Bh; 77.22.Ch; 77.84.Dy; 77.22.-d     

Dielectric and piezoelectric properties of (1−x)Ba0.7Sr0.3TiO3−xBa0.7Ca0.3TiO3 perovskites

Dielectric and piezoelectric properties of (1?x)Ba_0.7Sr_0.3TiO₃?xBa_0.7Ca_0.3TiO₃ (BST?xBCT) (x=0.2–0.9) perovskite ceramics have been investigated. BCT has fully incorporated into BST lattice, forming a complete perovskite solid solution, whose lattice constant χ decreases almost linearly with increase in x from 0.2 to 0.4, while showing an anomalous expansion at 0.4<x≤0.6. This, together with the deviation of tetragonal–orthorhombic phase transition temperature (T_O–T) from the linear relation T_O–T (K)=?103.7x+239.3 at x=0.5, suggests that a small amount of Ca²⁺ has substituted for Ti⁴⁺. Curie temperature T_C increases linearly with increase in x from 0.2 to 0.9, which is mainly contributed to the increase of the Ba/Sr ratio. The calculated degree of relaxation (γ) is in the range of 1.41–1.53, indicating that the BST–xBCT ceramics are ferroelectric materials with diffuse phase transition. Strain and piezoelectric constant (d₃₃) decrease with increasing x, whereas planar electromechanical coefficient (k_p) reaches a maximum (17.0%) at x=0.6.     

Some dielectric properties of Ba1-xSrxTiO3 single crystals grown from a KF flux

The temperature dependences of permittivity and of hysteresis loops in the range of 4.2 K to 600 K were measured on mixed Ba_1-xSr_xTiO₃ single crystals, grown in the whole concentration region 0≦x≦1 from a KF flux. It is shown that a solid solution with dielectric properties compatible with existing theories is formed by isovalent substitution of Ba by Sr only for x=0?0.4 and 0.8?1. A comparison between our results on single crystals and previous measurements on mixed ceramic materials is carried out.     

Relaxor properties of Nb-modified (Ba0.8Sr0.2)TiO3 ceramics

Nb-doped (Ba_0.8Sr_0.2)TiO₃ ceramics were prepared using conventional mixed-oxide processing technique. Permittivity and loss factor were investigated as a function of temperature for various frequencies of the measuring field. The obtained results confirmed the relaxor ferroelectric behaviour of the studied ceramics, i.e. a strong frequency dispersion of the permittivity maximum and a visible shift of its temperature with frequency. Analysis of real part of permittivity allowed us to determine the value of the freezing temperature characterising the relaxor ferroelectrics. The physical processes, responsible for the relaxor behaviour of the studied ceramics are discussed.     

Ferroelectric phase transition of Ba1− x Sr x Ti0.6Zr0.4O3 ceramics

Perovskite type Ba_{1? x} Sr _x Ti_0.6Zr_0.4O₃ (with x = 0.0, 0.1, 0.2, 0.4 and 0.5) ceramics have been synthesized through solid oxide reaction route. The room temperature XRD study suggests the compositions have single phase cubic symmetry. Microstructural studies have shown a step decrease in grain size. The dielectric study reveals that the materials are of relaxor type and undergo a diffuse type ferroelectric phase transition. The diffusivity increases with increase in Sr contents in the studied composition range. The transition temperature decreases with increase in Sr contents due to the decrease in grain size.     

Composition-related structural,thermal and mechanical properties of Ba1−xSrxTiO3 ceramics (0 ≤ x ≤ 0.4)

The Ba_1?xSr_xTiO₃ (BST) ceramics were prepared by conventional ceramic method. The crystalline structure and morphology were studied by X-ray diffraction and scanning electron microscopy, respectively. Experimental results show that increase of sintering temperature leads to an uncontrolled precipitating of the phase with a lower content of Ti. The dielectric constant and specific heat as a function of composition and temperature were investigated. The increasing concentration of Sr ions leads to a shift of the Curie point below room temperature. To determine the elastic constants (the Young's modulus E, the shear modulus G and the Poisson's ratio v) of BST, a method of measurement of the longitudinal (ν_L) and transverse (ν_T) ultrasonic wave velocities for this type of material was developed. The structural, dielectric and mechanical properties of BST ceramics were discussed in terms of microstructure and chemical composition     

Gradient-stress on polarization in Ba1−x Sr x TiO3 films

A group of position-thickness-dependent stresses are used to modified Landau-Devonshire theory to investigate the second-order phase transition in Ba_1?x Sr _x TiO₃ films. The result shows that the short-range interaction between the unit cells of the film and the substrate induces the phase transition dispersion and the rise of the transition temperature in the films. The dependence of the effective dielectric constant on the temperature and the average spontaneous polarization on the film thickness are computed, which qualitatively agree with the experiments.     

Raman spectroscopy of BaTiO3/(Ba,Sr)TiO3 superlattices

A series of BaTiO₃/Ba_{1 ? x} Sr _x TiO₃ (BT/BST) superlattices were prepared by pulsed laser deposition on MgO substrates with a constant period of 80 Å (40 Å BT and 40 Å BST) and varying compositions of the BST layer so that the Ba/Sr concentration ratios were 0/100, 30/70, 40/60, 50/50, 60/40, 70/30, 100/0. The soft mode E(1TO) of the polarized Raman spectra transformed depending on the Ba/Sr ratio in the BST layer. As the Sr concentration in the BST layers increased from 0 to 100%, the E(1TO) soft mode half-width varied from 171 to 103 cm^?1 and its frequency increased from 31 to 109 cm^?1 due to the interaction between the epitaxial layers forming the superlattices.