Er3+/Yb3+共掺TeO2-Li2O-B2O3-GeO2玻璃系统的光谱性质和热稳定性研究

制备了Er³⁺/Yb³⁺共掺的70TeO₂-5Li₂O-(25-x)B₂O₃-xGeO₂（x=0,5,10,15,20 mol%）系列玻璃, 研究了玻璃的热稳定性能, 测试了玻璃的吸收光谱、荧光光谱以及Er3+离子4I13/2能级荧光寿命, 并根据McCumber理论计算了Er³⁺离子4I13/2→4I15/2跃迁的受激发射截面. 结果表明：随着GeO₂含量的增加, 玻璃的热稳定性逐渐提高, 荧光谱线半高宽（FWHM）保持在70 nm左右, 而荧光强度和Er3+离子4I13/2能级荧光寿命逐渐提高, 研究表明这种玻璃系统是一种具有应用潜能的宽带光纤放大器用的基质材料.     

Er3+单掺及Er3+/Yb3+共掺SiO2-Al2O3-La2O3玻璃光谱性质研究

研究了单掺Er³⁺及Er³⁺/Yb³⁺共掺SiO₂-Al₂O₃-La₂O₃玻璃的光谱性质随稀土离子浓度变化规律,应用McCumber理论计算了玻璃在1.53 μm的发射截面及积分吸收截面.结果表明:在Er³⁺离子掺杂浓度相同时,玻璃在980 nm吸收截面与Yb³⁺掺杂浓度成反比;当样品中Yb³⁺离子掺杂浓度为3.94×10²⁰ cm^-3时,玻璃在1.53 μm的吸收截面和发射截面最大,在1.40～1.60 μm积分吸收截面也最大;Er³⁺/Yb³⁺共掺SiO₂-Al₂O₃-La₂O₃玻璃在1.53 μm的荧光半高宽随Er³⁺掺杂浓度升高而增加,当Er³⁺离子掺杂浓度为2.41×10²⁰ cm^-3时,玻璃的荧光半高宽(FWHM)达到52.5 nm.     

Yb:YAG晶体的晶胞参量及Yb3+分凝系数的研究

应用提拉法生长出不同Yb³⁺浓度的Yb_3xY_3(1-x)Al₅O₁₂晶体.Yb³⁺离子的分凝系数1是1.08±0.01,与Yb³⁺离子掺杂浓度无关.研究了Yb_3xY_3(1-x)Al₅O₁₂晶体的晶胞参量,推导出联系晶胞参量、密度与Yb³⁺离子掺杂浓度的关系方程式.     

包层泵浦的L波段Er3+/Yb3+共掺光纤激光器

报道了一种工作波长在L波段的包层泵浦Er³⁺/Yb³⁺共掺光纤环形激光器. 环形腔内的激光工作介质为一段9 m长的Er³⁺/Yb³⁺共掺高掺杂光纤. 利用6个976 nm LD同时抽运前段Er³⁺/Yb³⁺共掺双包层光纤产生的放大自发辐射谱作二次抽运源, 使腔内增义谱由C波段移到L波段, 实现了L波段光纤激光器的稳定输出; 采用包层泵浦技术, 在抽运功率为3594.5 mW时, 测得泵浦入纤功率为2731.8 mW, 实现了输出连续功率最大518.4 mW,斜率效率达到19% 的激光输出; 所形成激光的工作波长为1613.94 nm, 激光光谱的3 dB带宽为1.5 nm, 边模抑制比接近于50 dB.     

Er3+及Er3+/Yb3+掺杂ZrO2-Al2O3的制备及发光性质

采用共沉淀法制备了纳米晶ZrO₂-Al₂O₃∶Er³⁺发光粉体.所制备的粉体室温下具有Er3+离子特征荧光发射,主发射在绿光,其中位于547 nm、560 nm的绿光最强,并得出稀土离子与基质之间有能量传递.对不同煅烧温度下的样品研究表明:因不同温度下所制得的样品晶相不同.研究了纳米晶ZrO2-Al2O3∶Er3+及ZrO₂-Al₂O₃∶Er³⁺/Yb³⁺的上转换发光,并分析了上转换的跃迁机制.发现ZrO₂-Al₂O₃∶Er³⁺的绿光为双光子过程,而ZrO₂-Al₂O₃∶Er³⁺、Yb³⁺的上转换光谱中,红光和绿光也为双光子过程,而极弱的蓝光为三光子过程.讨论了Er³⁺的浓度猝灭现象.最适宜掺杂浓度的原子分数为2%（Er³⁺/Zr⁴⁺）.     

Yb3+、Er3+掺杂ZBLAN非晶的激发态频率上转换

我们以前对非晶ZBLAN光纤玻璃中掺杂稀土离子Er³⁺的转换发光的研究表明,在室温、大功率半导体激光器的激发下,Er³⁺的荧光主要是通过单离子步进双光子过程发生的,而其多光子过程虽然非常微弱,但在强的半导体激光的照射下也可产生.通过Yb³⁺的掺杂敏化,Er³⁺的各条荧光谱线都有不同程度的增强,而且增强幅度极大,产生了迄今为止我们所知的最强的绿光发射,Er离子的蓝、紫外的发光也得到子测量.这说明Yb³⁺对Er³⁺的上转换荧光过程有着强烈的敏化作用,这一现象的应用前景有待进一步开拓.     

纳米晶ZrO2:Er3+-Yb3+的制备及其室温上转换发射

用化学共沉淀法制备了ZrO₂:Er³⁺-Yb³⁺纳米晶粉体，所制备的纳米晶粉体具有较强的室温上转换发射和红外发射.研究了样品的晶体结构和上转换发光性质随着Yb³⁺掺杂浓度和煅烧温度的变化关系.通过X射线衍射谱分析发现，经800℃煅烧2h后得到的ZrO₂:Er³⁺-Yb³⁺纳米晶是四方相和单斜相的混合结构，经950℃煅烧2h后得到的样品以单斜相为主，随着Y     

Yb3+掺杂对Er3+:NaYF4上转换发光的调制作用

采用溶胶-凝胶(Sol-gel)法制备了2 mol％ Er3+、0,20和80 mol％ Yb3+共掺杂NaYF4上转换发光粉末.Er3+:NaYF4为α-NaYF4相和β-NaYF4相的混合结构,Yb3+共掺杂促进了β相到a相的转变.在976 nm半导体激光器(LD)激发下获得了对应于Er3+的2 H11/2/4 S...     

Nd3+掺杂B2O3-Nb2O5-BaO-La2O3玻璃光谱性质的研究

 用高温熔融法制备了Nd³⁺(物质的量分数2％）掺杂40B₂O₃-(15-χ)Nb₂O₅-45BaO-χLa₂O₃玻璃，测量了样品的吸收光谱、发射光谱和差热分析（DTA）曲线。根据Nd3+光学跃起矩阵的特点，应用Judd-Ofelt理论，从吸收光谱获得了Nd³⁺光学跃起的强度参数。并计算了Nd³⁺离子的自发辐射跃迁几率、总自发辐射几率、荧光分支比、辐射能级寿命和受激发射截面。结果表明：该体系玻璃中，随着Nb₂O₅ 含量的增加和La₂O₃₂增大，说明材料的对称性降低；而Ω₆减小，说明Nd-O键的共价性和键强增强；受激发射截面减小。DTA实验表明，随着Nb₂O₅含量的增加，材料的热稳定性提高。     

双包层Er3+/Yb3+共掺光纤激光器动态特性的分析

分析了弛豫振荡前上能级Er³⁺、Yb³⁺粒子数的变化和弛豫振荡时Er³⁺上能级粒子数的变化情况以及弛豫振荡时激光功率的变化规律,结果表明:弛豫振荡时的激光峰值功率远大于稳态时的激光功率.     

Enhanced optical activation of Er in Er-doped Al2O3 powders by Y codoping in a sol-gel method

Enhanced photoluminescence (PL) mechanism of Er³⁺-doped Al₂O₃ powders by Y³⁺ codoping at wavelength 1.53 μm has been investigated through PL measurements of 0.1 mol% Er³⁺- and 0-20 mol% Y³⁺-codoped Al₂O₃ powders prepared at a sintering temperature of 900 °C in a non-aqueous sol-gel method. PL intensity and lifetime of Er³⁺-Y³⁺-codoped Al₂O₃ powders composed of γ-(Al,Er,Y)₂O₃ and θ-(Al,Er,Y)₂O₃ phases increased with increasing Y³⁺-codoping concentration. The 10-20 mol% Y³⁺ codoping in 0.1 mol% Er³⁺-doped Al₂O₃ powders intensified the PL intensity by about 20 times, with a PL lifetime prolonged from 3.5 to 5.8 ms. A maximal increase of the optical activity of Er³⁺ in 0.1 mol% Er³⁺-Y³⁺-codoped Al₂O₃ powders about one order was achieved by 10-20 mol% Y³⁺ codoping. It is found that the improved PL properties for Er³⁺-Y³⁺-codoped Al₂O₃ powders are mainly attributed to enhanced optical activation of Er³⁺ in the Al₂O₃ by Y³⁺ codoping, and to the slightly increased radiative quantum efficiency of Er³⁺ in the Al₂O₃.     

Green and red up-conversion emissions of Er-Yb-codoped Al2O3 powders prepared by the nonaqueous sol-gel method

The 1 mol% Er³⁺- and 0-20 mol% Yb³⁺-codoped Al₂O₃ powders have been prepared by the nonaqueous sol-gel process using aluminum isopropoxide as precursor, acetylacetone as chelating agent, nitric acid as catalyzer, and hydrated erbium and ytterbium nitrate as dopant under isopropanol environment. The two crystalline types of doped Al₂O₃, γ and θ, and a stoichiometric compound, (Yb,Er)₃Al₅O₁₂, were obtained for all the Er³⁺-Yb³⁺-codoped Al₂O₃ powders at the sintering temperature of 1000 °C. The maximal intensity of both the green and red up-conversion emissions centered at about 523, 545, and 660 nm was observed for the 1 mol% Er³⁺- and 10 mol% Yb³⁺-codoped Al₂O₃ powders. The intensity ratio of the red to green up-conversion emission (I_red/I_green) increased with increasing the Yb³⁺ doping concentration for the Er³⁺-Yb³⁺-codoped Al₂O₃ powders. Furthermore, the intensity ratio of the green up-conversion emission at about 523 to 545 nm (I₅₂₃/I₅₄₅) was proportional to the Yb³⁺ doping concentration and pump electric current, which was associated with the elevated temperature of powders.     

Er3+掺杂SiO2复合的Al2O3粉末结构及光致发光特性

采用溶胶-凝胶(sol-gel)工艺制备0.1 mol% Er³⁺掺杂Al₂O₃体系和SiO₂-Al₂O₃复合体系粉末. 实验结果表明：5 mol%的SiO₂复合加入Al₂O₃抑制γ→θ和θ→α相转变. 掺0.1 mol%Er³⁺:Al₂O₃体系粉末，900℃烧结，在1.47—1.63μm波段内光致发光(PL)谱为中心波长1.53 μm、半高宽56 nm的单一宽峰，1000—1200℃烧结，劈裂为多峰PL谱. 掺0.1 mol%Er³⁺:SiO₂-Al₂O₃复合体系粉末，在高达1200℃烧结，仍保持中心波长1.53 μm的单一宽峰PL谱，由于—OH更完全的脱除，PL强度较900℃烧结Al₂O₃体系，SiO₂-Al₂O₃复合体系均提高1个数量级. 关键词： 2-Al₂O₃复合体系')" href="#">SiO₂-Al₂O₃复合体系 掺铒 溶胶-凝胶工艺 光致发光     

Effects of Yb^3＋ in Er^3＋/Yb^3＋ Codoped Fluorophosphate Glasses

For the Er^3＋ /Yb^3＋ codoped fluorophosphate glasses, Judd-Ofelt theory is used to analyse the influence of YbF3 as not a sensitizer but an average component on the spectroscopic properties around 1530nm emission. The double roles of Yb^3＋, as a sensitizer and as an average component, are discussed. It is found that Yb^3＋ as an average component contributes to the increase of fluorescence lifetime, and Yb^3＋ as a sensitizer has the best sensitization when its concentration is 2.4 mol%.     

Er/Yb共掺体系的光致荧光行为及相关物理过程研究

采用固相反应方法，制备了Er₂O₃浓度固定为0.5mol%，Yb₂O₃浓度范围为0.0mol%—5.5mol%的Er/Yb共掺激光玻璃.通过吸收光谱、光致荧光光谱和上转换荧光光谱，研究了Yb₂O₃浓度对Er³⁺荧光特性的影响，并探讨了相关的物理机制.研究结果表明：Yb³⁺共掺对Er³⁺的⁴ 关键词： Er/Yb共掺 光致荧光 能量传递 合作上转换     

Upconversion properties of Er^3＋/Yb^3＋ co-doped TeO2-Nb2O5-Li2O glasses

The Er^3＋/Yb^3＋ co-doped TeO2-Nb2O5-Li2O glass is prepared by conventional melting method, and its upconversion spectra are measured. The intense green upconversion luminescence upon excitation with a 976 nm laser diode is observed with the naked eyes. The dependence of luminescence intensity on the ratio of Yb^3＋/Er^3＋ is discussed in detail, and the relationship between the ratio of green luminescence intensity to red luminescence intensity and the ratio of Yb^3＋/Er^3＋ is also studied, The luminescence intensity increases with the ratio of Yb^3＋/Er^3＋ increasing. The ratio of Yb^3＋/Er^3＋ plays a more important role than the concentration of Er^3＋ in determining the upconversion luminescence intensity. The ratio of green luminescence intensity to red luminescence intensity reaches a maximum when ratio of Yb^3＋/Er^3＋ is 3. Thus the glass could be one of the potential candidates for LD pumping solid-state lasers.     

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Cooperative Quantum Cutting of Nano-Crystalline BaF2：Tb^3＋, Yb^3＋ in Oxyfluoride Glass Ceramics

We report on cooperative quantum cutting in Tb^3＋- Yb^3＋ codoped glass ceramics. Precipitation of BaF2 nanocrystals is confirmed by XRD and HRTEM analysis. Near-infrared emission due to transition of Yb^3＋ ions under 485 nm excitation indicates cooperative energy transfer from Tb^3＋ to Yb^3＋. The quantum efficiency of this process reaches 145%. The realization of quantum cutting in glass ceramics may have promising applications in solar cells.