MRI of the lung gas-space at very low-field using hyperpolarized noble gases

In hyperpolarized (HP) noble-gas magnetic resonance imaging, large nuclear spin polarizations, about 100,000 times that ordinarily obtainable at thermal equilibrium, are created in 3He and 129Xe. The enhanced signal that results can be employed in high-resolution MRI studies of void spaces such as in the lungs. In HP gas MRI the signal-to-noise ratio (SNR) depends only weakly on the static magnetic field (B(0)), making very low-field (VLF) MRI possible; indeed, it is possible to contemplate portable MRI using light-weight solenoids or permanent magnets. This article reports the first in vivo VLF MR images of the lungs in humans and in rats, obtained at a field of only 15 millitesla (150 Gauss).     

Relaxation behavior of laser-polarized (129)Xe gas: size dependency and wall effect of the T(1) relaxation time in glass and gelatin bulbs

Size dependency of the relaxation time T(1) was measured for laser-polarized (129)Xe gas encapsulated in different sized cavities made by glass bulbs or gelatin capsules. The use of laser-polarized gas enhances the sensitivity a great deal, making it possible to measure the longer (129)Xe relaxation time in quite a short time. The size dependency is analyzed on the basis of the kinetic theory of gases and a relationship is derived in which the relaxation rate is connected with the square inverse of the diameter of the cavity. Such an analysis provides a novel parameter which denotes the wall effect on the relaxation rate when a gas molecule collides with the surface once in a second. The relaxation time of (129)Xe gas is also dependent on the material which forms the cavity. This dependency is large and the relaxation study using polarized (129)Xe gas is expected to offer important information about the state of the matter of the cavity wall.     

Relaxation of hyperpolarized 129Xe in a deflating polymer bag

In magnetic resonance imaging with hyperpolarized (HP) noble gases, data is often acquired during prolonged gas delivery from a storage reservoir. However, little is known about the extent to which relaxation within the reservoir will limit the useful acquisition time. For quantitative characterization, 129Xe relaxation was studied in a bag made of polyvinyl fluoride (Tedlar). Particular emphasis was on wall relaxation, as this mechanism is expected to dominate. The HP 129Xe magnetization dynamics in the deflating bag were accurately described by a model assuming dissolution of Xe in the polymer matrix and dipolar relaxation with neighboring nuclear spins. In particular, the wall relaxation rate changed linearly with the surface-to-volume ratio and exhibited a relaxivity of κ=0.392±0.008 cm/h, which is in reasonable agreement with κ=0.331±0.051 cm/h measured in a static Tedlar bag. Estimates for the bulk gas-phase 129Xe relaxation yielded T1bulk=2.55±0.22 h, which is dominated by intrinsic Xe-Xe relaxation, with small additional contributions from magnetic field inhomogeneities and oxygen-induced relaxation. Calculations based on these findings indicate that relaxation may limit HP 129Xe experiments when slow gas delivery rates are employed as, for example, in mouse imaging or vascular infusion experiments.     

Gas flow MRI using circulating laser-polarized 129Xe.

We describe an experimental approach that combines multidimensional NMR experiments with a steadily renewed source of laser-polarized 129Xe. Using a continuous flow system to circulate the gas mixture, gas phase NMR signals of laser-polarized 129Xe can be observed with an enhancement of three to four orders of magnitude compared to the equilibrium 129Xe NMR signal. Due to the fact that the gas flow recovers the nonequilibrium 129Xe nuclear spin polarization in 0.2 to 4 s, signal accumulation on the time scale of seconds is feasible, allowing previously inaccessible phase cycling and signal manipulation. Several possible applications of MRI of laser-polarized 129Xe under continuous flow conditions are presented here. The spin density images of capillary tubes demonstrate the feasibility of imaging under continuous flow. Dynamic displacement profiles, measured by a pulsed gradient spin echo experiment, show entry flow properties of the gas passing through a constriction under laminar flow conditions. Further, dynamic displacement profiles of 129Xe, flowing through polyurethane foams with different densities and pore sizes, are presented.     

Human Pulmonary Hyperpolarized ~(129)Xe MRI: a Preliminary Study

We study the feasibility and safety of human lung hyperpolarized(HP)~(129)Xe magnetic resonance imaging(MRI).There is no significant change in physiological parameters before and after the examinations of all subjects.Compared with computed tomography, HP~(129)Xe MRI is sensitive to earlier and smaller ventilation defects. The distribution of the HP~(129)Xe MRI signal reflects the pulmonary compliance with the gravity gradient. This is the first application of HP~(129)Xe MRI ventilation imaging in China, and this technology is expected to provide more useful information for clinical practice.     

Relaxation Behavior of Laser-Polarized Xe Gas: Size Dependency and Wall Effect of the T1 Relaxation Time in Glass and Gelatin Bulbs

Size dependency of the relaxation time T₁ was measured for laser-polarized ¹²⁹Xe gas encapsulated in different sized cavities made by glass bulbs or gelatin capsules. The use of laser-polarized gas enhances the sensitivity a great deal, making it possible to measure the longer ¹²⁹Xe relaxation time in quite a short time. The size dependency is analyzed on the basis of the kinetic theory of gases and a relationship is derived in which the relaxation rate is connected with the square inverse of the diameter of the cavity. Such an analysis provides a novel parameter which denotes the wall effect on the relaxation rate when a gas molecule collides with the surface once in a second. The relaxation time of ¹²⁹Xe gas is also dependent on the material which forms the cavity. This dependency is large and the relaxation study using polarized ¹²⁹Xe gas is expected to offer important information about the state of the matter of the cavity wall.     

Enhanced NMR signal from the laser-polarized129Xe produced by spin exchange at a high magnetic field

Nuclear-magnetic-resonance (NMR) measurement of laser-polarized gaseous¹²⁹Xe produced by spin-exchange optical pumping with a narrow-linewidth laser at a high magnetic field of 4.7 T is reported. The samples are contained in the glass tubes. The nuclear spin polarization of the laserpolarized¹²⁹Xe is 3.9%, and this corresponds to an enhancement of 9· 10³ compared to the equilibrium value at 311 K and at the same magnetic field. The laser-enhanced¹²⁹Xe NMR signals can be used in MR imaging.     

超极化~(129)Xe磁共振波谱和成像及在生物医学中的应用

文章简要介绍了磁共振波谱和成像的基本原理和对限制其灵敏度的挑战,详细阐述了为增强磁共振信号而制备超极化129Xe的物理机制,论述了129Xe在生物组织中的溶解性以及化学位移的特异性,综述了当前超极化129Xe在肺部、脑部成像领域的研究进展和在临床方面应用所取得的有代表性的研究成果,并讨论了基于超极化129Xe分子生物探针的超灵敏磁共振技术的研究前景,最后对超极化129Xe在生物医学领域的应用与发展作了展望.     

XeNA: An automated ‘open-source’ Xe hyperpolarizer for clinical use

Here we provide a full report on the construction, components, and capabilities of our consortium’s “open-source” large-scale (~ 1 L/h) ¹²⁹Xe hyperpolarizer for clinical, pre-clinical, and materials NMR/MRI (Nikolaou et al., Proc. Natl. Acad. Sci. USA, 110, 14150 (2013)). The ‘hyperpolarizer’ is automated and built mostly of off-the-shelf components; moreover, it is designed to be cost-effective and installed in both research laboratories and clinical settings with materials costing less than $125,000. The device runs in the xenon-rich regime (up to 1800 Torr Xe in 0.5 L) in either stopped-flow or single-batch mode—making cryo-collection of the hyperpolarized gas unnecessary for many applications. In-cell ¹²⁹Xe nuclear spin polarization values of ~ 30%–90% have been measured for Xe loadings of ~ 300–1600 Torr. Typical ¹²⁹Xe polarization build-up and T₁ relaxation time constants were ~ 8.5 min and ~ 1.9 h respectively under our spin-exchange optical pumping conditions; such ratios, combined with near-unity Rb electron spin polarizations enabled by the high resonant laser power (up to ~ 200 W), permit such high P_Xe values to be achieved despite the high in-cell Xe densities. Importantly, most of the polarization is maintained during efficient HP gas transfer to other containers, and ultra-long ¹²⁹Xe relaxation times (up to nearly 6 h) were observed in Tedlar bags following transport to a clinical 3 T scanner for MR spectroscopy and imaging as a prelude to in vivo experiments. The device has received FDA IND approval for a clinical study of chronic obstructive pulmonary disease subjects. The primary focus of this paper is on the technical/engineering development of the polarizer, with the explicit goals of facilitating the adaptation of design features and operative modes into other laboratories, and of spurring the further advancement of HP-gas MR applications in biomedicine.     

Hyperpolarized (131)Xe NMR spectroscopy

Hyperpolarized (hp) (131)Xe with up to 2.2% spin polarization (i.e., 5000-fold signal enhancement at 9.4 T) was obtained after separation from the rubidium vapor of the spin-exchange optical pumping (SEOP) process. The SEOP was applied for several minutes in a stopped-flow mode, and the fast, quadrupolar-driven T(1) relaxation of this spin I = 3/2 noble gas isotope required a rapid subsequent rubidium removal and swift transfer into the high magnetic field region for NMR detection. Because of the xenon density dependent (131)Xe quadrupolar relaxation in the gas phase, the SEOP polarization build-up exhibits an even more pronounced dependence on xenon partial pressure than that observed in (129)Xe SEOP. (131)Xe is the only stable noble gas isotope with a positive gyromagnetic ratio and shows therefore a different relative phase between hp signal and thermal signal compared to all other noble gases. The gas phase (131)Xe NMR spectrum displays a surface and magnetic field dependent quadrupolar splitting that was found to have additional gas pressure and gas composition dependence. The splitting was reduced by the presence of water vapor that presumably influences xenon-surface interactions. The hp (131)Xe spectrum shows differential line broadening, suggesting the presence of strong adsorption sites. Beyond hp (131)Xe NMR spectroscopy studies, a general equation for the high temperature, thermal spin polarization, P, for spin I ≥ 1/2 nuclei is presented.     

An easy way to prepare pressurized glass inserts for MAS rotors

A novel technique to prepare pressurized glass insert samples for MAS rotors is described. In this technique, a small drop of epoxy is added to the tip of a piston and the gas is squeezed into the insert by pressing the piston. The amount of gas, i.e., pressure, in the sample can be controlled by the overall length of an insert test tube. As examples, (129)Xe NMR spectra taken from samples containing xenon gas, xenon gas and liquid crystal, and xenon gas, liquid crystal and porous solid, are shown. In principle, the method is feasible for making any kind of samples into glass inserts.     

Production of nitrogen-free, hyperpolarized 129Xe gas

129 Xe with a nuclear polarization far above the thermal equilibrium value (hyperpolarized) is used in NMR studies to increase sensitivity. Gaseous, adsorbed, or dissolved xenon is utilized in physical, chemical, and medical applications. With the aim in mind to study single-crystal surfaces by NMR of adsorbed hyperpolarized ¹²⁹Xe, three problems have to be solved. The reliable production of ¹²⁹Xe with highest nuclear polarization possible, the separation of the xenon gas from the necessary quench gas nitrogen without polarization loss, and the dosing/delivery of small amounts of polarized xenon gas to a sample surface. Here we describe an optical pumping setup that regularly produces xenon gas with a ¹²⁹Xe nuclear polarization of 0.7(±0.07). We show that a freeze–pump–thaw separation of xenon and nitrogen is feasible without a significant loss in xenon polarization. The nitrogen partial pressure can be suppressed by a factor of 400 in a single separation cycle. Dosing is achieved by using the low vapor pressure of a frozen hyperpolarized xenon sample. Received: 12 June 1998     

NMR Study of Laser polarized ~(129) Xe in Low Pressure Natural Xenon Gas

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｂｙｔｈｅｍｅｔｈｏｄｏｆｌａｓｅｒｏｐｔｉｃａｌｐｕｍｐｉｎｇｓｐｉｎ ｅｘｃｈａｎｇｅ ,ｔｈｅＮＭＲｓｉｇｎａｌｆｒｏｍ 1 2 9Ｘｅｇａｓｃａｎｂｅｇｒｅａｔｌｙｅｎｈａｎｃｅｄ[1 ] .Ｔｈｅｏｂｓｅｒｖｅｄｒａｔｉｏｏｆｓｉｇｎａｌｔｏｎｏｉｓｅｉｓｂｅｔｔｅｒｔｈａｎ 10 0 .Ｔｈｅａｍｐｌｉｆｉｃａｔｉｏｎｆａｃｔｏｒｏｆｔｈｅｎｕｃｌｅａｒｓｐｉｎｐｏｌａｒｉｚａｔｉｏｎｏｆｌａｓｅｒ ｐｏｌａｒｉｚｅｄ 1 2 9Ｘｅｉｓ 10 4ｂｙｃｏｍｐａｒｉｓｏｎｗｉｔｈｔｈｅＢ…     

NMR Study of Laser-polarized 129Xe in Low Pressure Natural Xenon Gas

The NMR signal from the laser-polarized t29 Xe in low-pressure natural xenon gas has been observed with a Bruker WP-80SY NMR spectrometer. The laser-polarized 129 Xe was produced by the method of laser pumping and spin exchange in a magnetic field of 1.87 Tesla. It is obtained experimentally that the nuclear spin relaxation rate 1/T1 of laser-polarized 129Xe are (4.03±1.97)×10-3/see～(2.21±0.78)×10-3/see in the range of the 3.33×103 Pa～8.29×104 Pa Xe gas pressures, the apparent wall relaxation rate 1/Tw* =(1.98±0.18)×10-3/see, and the relaxation rate coefficient C of 133Cs-129Xe spin exchange is (2.81±0.74)×10-16 em3/sec.     

Crackless linear through-wafer etching of Pyrex glass using <Emphasis Type="Italic">liquid-assisted</Emphasis> CO<Subscript>2</Subscript> laser processing

Pyrex glass etching is an important technology for the microfluid application to lab-on-a-chip devices, but suffers from very low etching rate and mask-requiring process in conventional HF/BOE wet or plasma dry etching as well as thermal induced crack surface by CO₂ laser processing. In this paper, we applied the liquid-assisted laser processing (LALP) method for linear through-wafer deep etching of Pyrex glass without mask materials to obtain a crackless surface at very fast etching rates up to 25 μm/s for a 20 mm long trench. The effect of laser scanning rate and water depth on the etching of the 500 μm thick Pyrex glass immersed in liquid water was investigated. The smooth surface without cracks can be achieved together with the much reduced height of bulge via an appropriate parameter control. A mechanism of thermal stress reduction in water and shear-force-enhanced debris removal is discussed. The quality improvement of glass etching using LALP is due to the cooling effect of the water to reduce the temperature gradient for a crackless surface and natural convection during etching to carry away the debris for diminishing bulge formation. An erratum to this article can be found at     

T1-relaxation of 129Xe on metal single crystal surfaces-multilayer experiments on iridium and monolayer considerations

The surface of a typical laboratory single crystal has about 10(15) surface atoms or adsorption sites, respectively, and is thus far out of reach for conventional NMR experiments using thermal polarization. It should however be in reach for NMR of adsorbed laser polarized (hyperpolarized) 129Xe, which is produced by spin transfer from optically pumped rubidium. With multilayer experiments of xenon adsorbed on an iridium surface we do not only demonstrate that monolayer sensitivity has been obtained, we also show that such surface experiments can be performed under ultra high vacuum conditions with the crystal being mounted in a typical surface analysis chamber on a manipulator with far-reaching sample heating and cooling abilities. With only four spectra summed up we present an NMR signal from at most 4x10(14) atoms of 129Xe, four layers of naturally abundant xenon, respectively. The fact that no monolayer signal has been measured so far is explained by a fast Korringa relaxation due to the Fermi contact interaction of the 129Xe nuclei with the electrons of the metal substrate. T(1)-relaxation times in the order of several ms have been calculated using all electron density functional theory for several metal substrates.     

Temperature response of 129Xe depolarization transfer and its application for ultrasensitive NMR detection

Trapping xenon in functionalized cryptophane cages makes the sensitivity of hyperpolarized (HP) 129Xe available for specific NMR detection of biomolecules. Here, we study the signal transfer onto a reservoir of unbound HP xenon by gating the residence time of the nuclei in the cage through the temperature-dependant exchange rate. Temperature changes larger than approximately 0.6 K are detectable as an altered reservoir signal. The temperature response is adjustable with lower concentrations of caged xenon providing more sensitivity at higher temperatures. Ultrasensitive detection of functionalized cryptophane at 310 K is demonstrated with a concentration of 10 nM, corresponding to a approximately 4000-fold sensitivity enhancement compared to conventional detection. This makes HPNMR capable of detecting such constructs in concentrations far below the detection limit of benchtop uv-visible light absorbance.     

Analysis of porosity in porous silicon using hyperpolarized 129Xe two-dimensional exchange experiments

The porosity in porous silicon was characterized using hyperpolarized (HP) xenon as a probe. HP xenon under conditions of continuous flow allows for the rapid acquisition of xenon NMR spectra that can be used to characterize a variety of materials. Two-dimensional exchange spectroscopy (EXSY) (129)Xe NMR experiments using HP xenon were performed to obtain exchange pathways and rates of xenon mobility between pores of different dimensions within the structure of porous silicon and to the gas phase above the sample. Pore sizes are estimated from chemical shift information and a model for pore geometry is presented.     

High capacity production of >65% spin polarized xenon-129 for NMR spectroscopy and imaging

A rubidium spin exchange optical pumping system for high capacity production of >65% spin polarized 129Xe gas is described. This system is based on a fiber coupled multiple laser diode array capable of producing an unprecedented 210 W of circularly polarized light at the pumping cell with a laser line width of 1.6 nm. The 129Xe nuclear spin polarization is measured as a function of flow rate, pumping cell pressure, and laser power for varying pumping gas compositions. A maximum 129Xe nuclear polarization of 67% was achieved using a 0.6% Xe mixture at a Xe flow rate of 2.45 sccm. The ability to generate 12% polarized 129Xe at rates in excess of 1L-atm/h is also demonstrated. To achieve production of 129Xe gas at even higher polarization will rely on further optimization of the pumping cell and laser beam geometries in order to mitigate problems associated with temperature gradients that are encountered at high laser power and Rb density.     

MEASUREMENTS OF RELAXATION OF SPIN POLARIZED 129Xe NUCLEI IN HIGH MAGNETIC FIELDS

We observed the NMR signal of low-pressure gas ¹²⁹Xe by laser enhanced method on an MSL-400 NMR spectrometer and measured nuclear spin relaxations of ¹²⁹Xe gas at various temperatures. The relaxation rate constant of ¹²⁹Xe-¹³³Cs spin exchange was obtained as (6.8±0.5)×10^-16cm^-3s^-1.