Relaxation behavior of laser-polarized (129)Xe gas: size dependency and wall effect of the T(1) relaxation time in glass and gelatin bulbs

Size dependency of the relaxation time T(1) was measured for laser-polarized (129)Xe gas encapsulated in different sized cavities made by glass bulbs or gelatin capsules. The use of laser-polarized gas enhances the sensitivity a great deal, making it possible to measure the longer (129)Xe relaxation time in quite a short time. The size dependency is analyzed on the basis of the kinetic theory of gases and a relationship is derived in which the relaxation rate is connected with the square inverse of the diameter of the cavity. Such an analysis provides a novel parameter which denotes the wall effect on the relaxation rate when a gas molecule collides with the surface once in a second. The relaxation time of (129)Xe gas is also dependent on the material which forms the cavity. This dependency is large and the relaxation study using polarized (129)Xe gas is expected to offer important information about the state of the matter of the cavity wall.     

Linewidth-Resolved N HSQC, a Simple 3D Method to Measure N Relaxation Times from T1 and T2 Linewidths

A three-dimensional approach for measuring ¹⁵N relaxation times is described. Instead of selecting particular values for the relaxation period, in the proposed method the relaxation period is incremented periodically in order to create a 3D spectrum. This additional frequency domain of the transformed spectrum contains the relaxation time information in the T₁ and T₂ linewidths, and thus the longitudinal and transverse ¹⁵N relaxation times can be measured without determination of 2D cross peak volumes/intensities and subsequent curve fitting procedures.     

Changes in Porcine Muscle Water Characteristics during Growth—An in Vitro Low-Field NMR Relaxation Study

This study investigates the effects of developmental stage and muscle type on the mobility and distribution of water within skeletal muscles, using low-field ¹H-NMR transverse relaxation measurements in vitro on four different porcine muscles (M. longissimus dorsi, M. semitendinosus, M. biceps femoris, M. vastus intermedius) from a total of 48 pigs slaughtered at various weight classes between 25 kg and 150 kg. Principal component analysis (PCA) revealed effects of both slaughter weight and muscle type on the transverse relaxation decay. Independent of developmental stage and muscle type, distributed exponential analysis of the NMR T₂ relaxation data imparted the existence of three distinct water populations, T_2b, T₂₁, and T₂₂, with relaxation times of approximately 1–10, 45–120, and 200–500 ms, respectively. The most profound change during muscle growth was a shift toward faster relaxation in the intermediate time constant, T₂₁. It decreased by approx. 24% in all four muscle types during the period from 25 to 150 kg live weight. Determination of dry matter, fat, and protein content in the muscles showed that the changes in relaxation time of the intermediate time constant, T₂₁, during growth should be ascribed mainly to a change in protein content, as the protein content explained 77% of the variation in the T₂₁ time constant. Partial least squares (PLS) regression revealed validated correlations in the region of 0.58 to 0.77 between NMR transverse relaxation data and muscle development for all the four muscle types, which indicates that NMR relaxation measurements may be used in the prediction of muscle developmental stage.     

Separating Structure and Dynamics in CSA/DD Cross-Correlated Relaxation: A Case Study on Trehalose and Ubiquitin

We present two new sensitivity enhanced gradient NMR experiments for measuring interference effects between chemical shift anisotropy (CSA) and dipolar coupling interactions in a scalar coupled two-spin system in both the laboratory and rotating frames. We apply these methods for quantitative measurement of longitudinal and transverse cross-correlation rates involving interference of ¹³C CSA and ¹³C–¹H dipolar coupling in a disaccharide, α,α- -trehalose, at natural abundance of ¹³C as well as interference of amide ¹⁵N CSA and ¹⁵N–¹H dipolar coupling in uniformly ¹⁵N-labeled ubiquitin. We demonstrate that the standard heteronuclear T₁, T₂, and steady-state NOE autocorrelation experiments augmented by cross-correlation measurements provide sufficient experimental data to quantitatively separate the structural and dynamic contributions to these relaxation rates when the simplifying assumptions of isotropic overall tumbling and an axially symmetric chemical shift tensor are valid.     

Laser-polarized Xe NMR and MRI at Ultralow Magnetic Fields

Laser-polarized ¹²⁹Xe and a high-T_csuperconducting quantum interference device (SQUID) are used to obtain magnetic resonance images in porous materials at a magnetic field of 2.3 mT, corresponding to a Larmor frequency of 27 kHz. Image resolution of 1 mm is obtained with gradients of only 1 mT/m. The resolution of xenon chemical shifts in different physicochemical environments at ultralow fields is also demonstrated. Details of the circulating flow optical pumping apparatus and the SQUID spectrometer are presented.     

A New Two-Dimensional Pulse Sequence for T2* Measurements of Protons in C Isotopomers

A new two-dimensional pulse sequence for T₂* measurement of protons directly coupled to ¹³C spins is proposed. The sequence measures the tranverse relaxation time of heteronuclear proton single-quantum coherence under conditions of free precession and is therefore well suited to evaluate relaxation losses of proton magnetization during preparation delays of heteronuclear pulse experiments in analytical NMR. The relevant part of the pulse sequence can be inserted as a “building block” into any direct or inverse detecting H,C correlation pulse sequence if proton spin–spin relaxation is to be investigated. In this contribution, the building block is inserted into a HETCOR as well as into a HMQC pulse sequence. Experimental results for the HETCOR-based sequence are given.     

Implementation Aspects of 3D Lattice-BGK: Boundaries, Accuracy, and a New Fast Relaxation Method

In many realistic fluid-dynamical simulations the specification of the boundary conditions, the error sources, and the number of time steps to reach a steady state are important practical considerations. In this paper we study these issues in the case of the lattice-BGK model. The objective is to present a comprehensive overview of some pitfalls and shortcomings of the lattice-BGK method and to introduce some new ideas useful in practical simulations. We begin with an evaluation of the widely used bounce-back boundary condition in staircase geometries by simulating flow in an inclined tube. It is shown that the bounce-back scheme is first-order accurate in space when the location of the non-slip wall is assumed to be at the boundary nodes. Moreover, for a specific inclination angle of 45 degrees, the scheme is found to be second-order accurate when the location of the non-slip velocity is fitted halfway between the last fluid nodes and the first solid nodes. The error as a function of the relaxation parameter is in that case qualitatively similar to that of flat walls. Next, a comparison of simulations of fluid flow by means of pressure boundaries and by means of body force is presented. A good agreement between these two boundary conditions has been found in the creeping-flow regime. For higher Reynolds numbers differences have been found that are probably caused by problems associated with the pressure boundaries. Furthermore, two widely used 3D models, namelyD₃Q₁₅andD₃Q₁₉, are analysed. It is shown that theD₃Q₁₅model may induce artificial checkerboard invariants due to the connectivity of the lattice. Finally, a new iterative method, which significantly reduces the saturation time, is presented and validated on different benchmark problems.     

NMR Study of Laser polarized ~(129) Xe in Low Pressure Natural Xenon Gas

Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｂｙｔｈｅｍｅｔｈｏｄｏｆｌａｓｅｒｏｐｔｉｃａｌｐｕｍｐｉｎｇｓｐｉｎ ｅｘｃｈａｎｇｅ ,ｔｈｅＮＭＲｓｉｇｎａｌｆｒｏｍ 1 2 9Ｘｅｇａｓｃａｎｂｅｇｒｅａｔｌｙｅｎｈａｎｃｅｄ[1 ] .Ｔｈｅｏｂｓｅｒｖｅｄｒａｔｉｏｏｆｓｉｇｎａｌｔｏｎｏｉｓｅｉｓｂｅｔｔｅｒｔｈａｎ 10 0 .Ｔｈｅａｍｐｌｉｆｉｃａｔｉｏｎｆａｃｔｏｒｏｆｔｈｅｎｕｃｌｅａｒｓｐｉｎｐｏｌａｒｉｚａｔｉｏｎｏｆｌａｓｅｒ ｐｏｌａｒｉｚｅｄ 1 2 9Ｘｅｉｓ 10 4ｂｙｃｏｍｐａｒｉｓｏｎｗｉｔｈｔｈｅＢ…     

NMR Study of Laser-polarized 129Xe in Low Pressure Natural Xenon Gas

The NMR signal from the laser-polarized t29 Xe in low-pressure natural xenon gas has been observed with a Bruker WP-80SY NMR spectrometer. The laser-polarized 129 Xe was produced by the method of laser pumping and spin exchange in a magnetic field of 1.87 Tesla. It is obtained experimentally that the nuclear spin relaxation rate 1/T1 of laser-polarized 129Xe are (4.03±1.97)×10-3/see～(2.21±0.78)×10-3/see in the range of the 3.33×103 Pa～8.29×104 Pa Xe gas pressures, the apparent wall relaxation rate 1/Tw* =(1.98±0.18)×10-3/see, and the relaxation rate coefficient C of 133Cs-129Xe spin exchange is (2.81±0.74)×10-16 em3/sec.     

NMR Relaxation and Diffusion Measurements on Iron(III)-Doped Kaolin Clay

Kaolin clay samples were mixed with various amounts of Fe₂O₃ powder. The influence of this magnetic impurity on NMR relaxation and diffusion measurements on the water in this porous material was investigated. The NMR relaxation measurements showed a nearly mono-exponential decay, leading to the conclusion that the pore size distribution of the clay samples is either narrow and/or that the pores are interconnected very well. Both the longitudinal and the transverse relaxation rate depend linearly on the concentration of the Fe₂O₃ impurity. The NMR diffusion measurements revealed that the Fe₂O₃ causes internal magnetic field gradients that largely exceed the maximum external gradient that could be applied by our NMR apparatus (0.3 T/m). Additional SQUID measurements yielded the magnetization and magnetic susceptibility of the samples at the magnetic field strength used in the NMR measurements (0.8 T). A theoretical estimate of the internal magnetic field gradients leads to the conclusion that the water in the porous clay samples cannot be described by the commonly observed motional averaging regime. Probably an intermediate or a localization regime is induced by the large internal gradients, which are estimated to be on the order of 1 to 10 T/m in the pore volume and may exceed 1000 T/m at the pore surface.     

Probing Proteins in Solution by Xe NMR Spectroscopy

The interaction of xenon with different proteins in aqueous solution is investigated by ¹²⁹Xe NMR spectroscopy. Chemical shifts are measured in horse metmyoglobin, hen egg white lysozyme, and horse cytochrome c solutions as a function of xenon concentration. In these systems, xenon is in fast exchange between all possible environments. The results suggest that nonspecific interactions exist between xenon and the protein exteriors and the data are analyzed in term of parameters which characterize the protein surfaces. The experimental data for horse metmyoglobin are interpreted using a model in which xenon forms a 1:1 complex with the protein and the chemical shift of the complexed xenon is reported (Locci et al., Keystone Symposia “Frontiers of NMR in Molecular Biology VI”, Jan. 9–15, 1999, Breckenridge, CO, Abstract E216, p. 53; Locci et al., XeMAT 2000 “Optical Polarization and Xenon NMR of Materials”, June 28–30, 2000, Sestri Levante, Italy, p. 46).     

Millimeter-Wave Spectroscopy, High-Resolution Infrared Spectrum, ab Initio Calculations, and Molecular Geometry of FPS

The transient thiophosphenous fluoride FPS was produced by pyrolysis of 2.5% F₂PSPF₂ in Ar at 1300–1800°C. High-resolution (≥0.004 cm⁻¹) Fourier transform infrared spectra of the a-type ν₁ and b-type ν₂ bands, centered respectively at 803.249 and 726.268 cm⁻¹, were measured and fitted to rotational and quartic centrifugal distortion parameters. The millimeter-wave spectrum, essentially b-type, was measured between 300 and 370 GHz in the ground state and in the ν₃ excited state for FP³²S and in the ground state for FP³⁴S. The frequencies were fitted to a Watson-type A-reduced Hamiltonian up to sextic distortion terms. High level ab initio calculations with large basis sets were performed on FPS and supported the first identification of its infrared and millimeter wave spectra. The calculated anharmonic force field provided precise ab initio rovibrational α constants which were combined with the experimental molecular parameters to determine an accurate equilibrium structure of the molecule: r_e(PS)=188.86 pm, r_e(PF)=158.70 pm, θ(FPS)=109.28°. The collision-controlled 1/e lifetime measured in a 10-Pa (1 : 20) F₂PSPF₂/Ar mixture was 2 s, more than two orders of magnitude larger than that of FPO under the same experimental conditions.     

Consequences of Xe–H Cross Relaxation in Aqueous Solutions

We have investigated the transfer of polarization from ¹²⁹Xe to solute protons in aqueous solutions to determine the feasibility of using hyperpolarized xenon to enhance ¹H sensitivity in aqueous systems at or near room temperatures. Several solutes, each of different molecular weight, were dissolved in deuterium oxide and although large xenon polarizations were created, no significant proton signal enhancement was detected in -tyrosine, α-cyclodextrin, β-cyclodextrin, apomyoglobin, or myoglobin. Solute-induced enhancement of the ¹²⁹Xe spin–lattice relaxation rate was observed and depended on the size and structure of the solute molecule. The significant increase of the apparent spin–lattice relaxation rate of the solution phase ¹²⁹Xe by α-cyclodextrin and apomyoglobin indicates efficient cross relaxation. The slow relaxation of xenon in β-cyclodextrin and -tyrosine indicates weak coupling and inefficient cross relaxation. Despite the apparent cross-relaxation effects, all attempts to detect the proton enhancement directly were unsuccessful. Spin–lattice relaxation rates were also measured for Boltzmann ¹²⁹Xe in myoglobin. The cross-relaxation rates were determined from changes in ¹²⁹Xe relaxation rates in the α-cyclodextrin and myoglobin solutions. These cross-relaxation rates were then used to model ¹H signal gains for a range of ¹²⁹Xe to ¹H spin population ratios. These models suggest that in spite of very large ¹²⁹Xe polarizations, the ¹H gains will be less than 10% and often substantially smaller. In particular, dramatic ¹H signal enhancements in lung tissue signals are unlikely.     

Relaxation of hyperpolarized 129Xe in a deflating polymer bag

In magnetic resonance imaging with hyperpolarized (HP) noble gases, data is often acquired during prolonged gas delivery from a storage reservoir. However, little is known about the extent to which relaxation within the reservoir will limit the useful acquisition time. For quantitative characterization, 129Xe relaxation was studied in a bag made of polyvinyl fluoride (Tedlar). Particular emphasis was on wall relaxation, as this mechanism is expected to dominate. The HP 129Xe magnetization dynamics in the deflating bag were accurately described by a model assuming dissolution of Xe in the polymer matrix and dipolar relaxation with neighboring nuclear spins. In particular, the wall relaxation rate changed linearly with the surface-to-volume ratio and exhibited a relaxivity of κ=0.392±0.008 cm/h, which is in reasonable agreement with κ=0.331±0.051 cm/h measured in a static Tedlar bag. Estimates for the bulk gas-phase 129Xe relaxation yielded T1bulk=2.55±0.22 h, which is dominated by intrinsic Xe-Xe relaxation, with small additional contributions from magnetic field inhomogeneities and oxygen-induced relaxation. Calculations based on these findings indicate that relaxation may limit HP 129Xe experiments when slow gas delivery rates are employed as, for example, in mouse imaging or vascular infusion experiments.     

Coherent Raman and Infrared Studies of Sulfur Trioxide

High-resolution (0.001 cm⁻¹) coherent anti-Stokes Raman scattering (CARS) was used to observe the Q-branch structure of the IR-inactive ν₁ symmetric stretching mode of ³²S¹⁶O₃ and its various ¹⁸O isotopomers. The ν₁ spectrum of ³²S¹⁶O₃ reveals two intense Q-branches in the region 1065–1067 cm⁻¹, with surprisingly complex vibrational–rotational structure not resolved in earlier studies. Efforts to simulate this with a simple Fermi-resonance model involving ν₁ and 2ν₄ states do not reproduce the spectral detail, nor do they yield reasonable spectroscopic parameters. A more subtle combination of Fermi resonance and indirect Coriolis interactions with nearby states, 2ν₄(1=0, ±2), ν₂+ν₄(1=±1), 2ν₂(1=0), is suspected and a determination of the location of these coupled states by high-resolution infrared measurements is under way. At medium resolution (0.125 cm⁻¹), the infrared spectra reveal Q-branch features from which approximate band origins are estimated for the ν₂, ν₃, and ν₄ fundamental modes of ³²S¹⁸O₃, ³²S¹⁸O₂¹⁶O, and ³²S¹⁸O¹⁶O₂. These and literature data for ³²S¹⁶O₃ are used to calculate force constants for SO₃ and a comparison is made with similar values for SO₂ and SO. The frequencies and force constants are in excellent agreement with those obtained by Martin in a recent ab initio calculation.     

Wall relaxation of spin polarized 129Xe nuclei

The wall relaxation of spin polarized ¹²⁹Xe nuclei is much longer in silicone coated pyrex cells than in uncoated cells. In contrast to uncoated glass cells where the wall relaxation times are unpredictable and usually only a few tens of seconds, the relaxation time of ¹²⁹Xe in silicone-coated cells is usually 20 minutes or longer.     

The First in Vivo Observation of C–N Coupling in Mammalian Brain

[5-¹³C,¹⁵N]Glutamine, with ¹J(¹³C–¹⁵N) of 16 Hz, was observed in vivo in the brain of spontaneously breathing rats by ¹³C MRS at 4.7 T. The brain [5-¹³C]glutamine peak consisted of the doublet from [5-¹³C,¹⁵N]glutamine and the center [5-¹³C,¹⁴N]glutamine peak, resulting in an apparent triplet with a separation of 8 Hz. The time course of formation of brain [5-¹³C,¹⁵N]glutamine was monitored in vivo with a time resolution of 20–35 min. This [5-¹³C,¹⁵N]glutamine was formed by glial uptake of released neurotransmitter [5-¹³C]glutamate and its reaction with ¹⁵NH₃ catalyzed by the glia-specific glutamine synthetase. The neurotransmitter glutamate C5 was selectively¹³C-enriched by intravenous [2,5-¹³C]glucose infusion to ¹³C-label whole-brain glutamate C5, followed by [¹²C]glucose infusion to chase ¹³C from the small and rapidly turning-over glial glutamate pool, leaving ¹³C mainly in the neurotransmitter [5-¹³C]glutamate pool, which is sequestered in vesicles until release. Hence, the observed [5-¹³C,¹⁵N]glutamine arises from a coupling between ¹³C of neuronal origin and ¹⁵N of glial origin. Measurement of the rate of brain [5-¹³C,¹⁵N]glutamine formation provides a novel noninvasive method of studying the kinetics of neurotransmitter uptake into glia in vivo, a process that is crucial for protecting the brain from glutamate excitotoxicity.     

IR Spectrum of C8H2: Integrated Band Intensities and Some Observational Implications

Polyynes are of astrophysical interest since they appear to be involved in organic chemistry in very different mediums. In Titan's atmosphere, the lightest polyyne, C₄H₂, was detected by Voyager. Recently C₄H₂ and C₆H₂ have been discovered in a protoplanetary nebula, suggesting polyynes as a possible chemical pathway to PAH (polycyclic aromatic hydrocarbons). Moreover, several experimental simulations and modeling imply their production from the photochemistry of methane and their involvement in the formation of organic aerosols. After the study of C₄H₂ and C₆H₂ spectra in the UV and IR wavelength range, we report here the first spectrum of gaseous C₈H₂ in the range 400–4000 cm⁻¹ at room temperature and low resolution. The task was hardly achieved because of the high instability of this molecule with temperature and pressure. To avoid exothermic polymerization, the compound as mixed with a solvent. We have performed a separate spectroscopic study of the solvent to determine C₈H₂ partial pressure within the mixture. This allowed us to calculate C₈H₂ integrated band intensities. In the studied wavelength range, C₈H₂ presents three main bands similar to those of C₆H₂ in terms of vibrational type, position, and relative intensity. To study the possible identification of these polyynes by spatial observatories (Cassini–Huygens, ISO), we have also measured the C₆H₂ and C₈H₂ infrared spectra in the range 400–1500 cm⁻¹ at 0.35 cm⁻¹ resolution.     

Introducing Physical Relaxation Terms in Bloch Equations

The Bloch equation models the evolution of the state of electrons in matter described by a Hamiltonian. To model more physical phenomena we have to introduce phenomenological relaxation terms. The introduction of these terms has to conserve some positiveness properties. The aim of this paper is to review possible relaxation models and to provide insight into how to discretize them properly in view of numerical computations.     

Measurement of Small One-Bond Proton–Carbon Residual Dipolar Coupling Constants in Partially Oriented C Natural Abundance Oligosaccharide Samples: Analysis of Heteronuclear JCH-Modulated Spectra with the BIRD Inversion Pulse

Two 2D J-modulated HSQC-based experiments were designed for precise determination of small residual dipolar one-bond carbon–proton coupling constants in ¹³C natural abundance carbohydrates. Crucial to the precision of a few hundredths of Hz achieved by these methods was the use of long modulation intervals and BIRD pulses, which acted as semiselective inversion pulses. The BIRD pulses eliminated effective evolution of all but ¹J_CH couplings, resulting in signal modulation that can be described by simple modulation functions. A thorough analysis of such modulation functions for a typical four-spin carbohydrate spin system was performed for both experiments. The results showed that the evolution of the ¹H–¹H and long-range ¹H–¹³C couplings during the BIRD pulses did not necessitate the introduction of more complicated modulation functions. The effects of pulse imperfections were also inspected. While weakly coupled spin systems can be analyzed by simple fitting of cross peak intensities, in strongly coupled spin systems the evolution of the density matrix needs to be considered in order to analyse data accurately. However, if strong coupling effects are modest the errors in coupling constants determined by the “weak coupling” analysis are of similar magnitudes in oriented and isotropic samples and are partially cancelled during dipolar coupling calculation. Simple criteria have been established as to when the strong coupling treatment needs to be invoked.