Solvent effects on chemical processes: new solvents designed on the basis of the molecular–microscopic properties of (molecular solvent + 1,3‐dialkylimidazolium) binary mixtures

The purpose of this work was to analyze the microscopic feature of binary solvent systems formed by a molecular solvent (acetonitrile or dimethylformamide or methanol) and an ionic liquid (IL) cosolvent [1‐(1‐butyl)‐3‐methylimidazolium tetrafluoroborate or 1‐(1‐butyl)‐3‐methylimidazolium hexafluorophosphate]. The empirical solvatochromic solvent parameters E_T(30), π*, α, and β were determined from the solvatochromic shifts of adequate indicators. The behavior of the solvent systems was analyzed according to their deviation from ideality. The study focused on the identification of solvent mixtures with relevant solvating properties in order to select mixed solvents with particular characteristics. The comparison of the molecular–microscopic solvent parameters corresponding to the selected binary mixtures with both ILs considered at similar mixed‐solvent composition revealed that the difference is centered on the basic character of them. A kinetic study of a nucleophilic aromatic substitution reaction between 1‐fluoro‐2,4‐dinitrobenzene (FDNB) and 1‐butylamine (BU) developed in (acetonitrile or dimethylformamide + IL) solvent mixtures is presented in order to investigate and compare the solvent effects on a chemical process. For the explored reactive systems the solvation behavior is dominated by both the dipolarity/polarizability and the basicity of the media, contributing these solvent properties to accelerating the chemical process. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical study of keto–enol tautomerism by quantum mechanical calculations (the QM/MC/FEP method)

In this study, the tautomeric equilibrium between the keto and enol forms has been studied for five typical ketones and aldehydes: i‐butanal, acetaldehyde, acetone, acetylacetone, and dimedone. The level of theory used in the gas‐phase calculation was Becke, three‐parameter, Lee–Yang–Parr/6‐311G(d,p)//Becke, three‐parameter, Lee–Yang–Parr/6‐31G(d). The free energies of solvation were included in the calculation by using the free‐energy perturbation method based on Monte Carlo simulation, that is, the quantum mechanical/Monte Carlo/free‐energy perturbation method. Three different models, incorporating no‐water, one‐water, and two‐waters, were adopted. The results showed that in the gas phase the addition of water molecules to the reaction mechanism caused the activation barriers (ΔG^?_gas) to decrease by half relative to the water‐free mechanism, but there was no effect on the relative difference in free energy, ΔG_gas. The solvation effects (ΔG_sol), based on quantum mechanical/Monte Carlo/free‐energy perturbation calculations, were added to those of the gas‐phase results of the one‐water and two‐waters models. The two‐waters model produced values that were very consistent with the experimental data for all of the tautomers. The differences in the relative Gibbs free energy (ΔG_rxn) were less than 1.0 kcal mol^–1. In summary, the inclusion of solvent molecules in gas‐phase calculations plays a very important role in producing results consistent with experimental data. Copyright © 2012 John Wiley & Sons, Ltd.     

Reaction kinetics investigation of 1‐fluoro‐2,4‐dinitrobenzene with substituted anilines in ethyl acetate–methanol mixtures using linear and nonlinear free energy relationships

Aromatic nucleophilic substitution reaction of 1‐fluoro‐2,4‐dinitrobenzene with para‐substituted and meta‐substituted anilines was kinetically investigated in the mixtures of ethyl acetate and methanol at room temperature. The correlation of second‐order rate coefficients with Hammett's substituent constants yields a fairly linear straight line with negative slope in different mole fractions of ethyl acetate–methanol mixtures. The measured rate coefficients of the reaction demonstrated a dramatic variation in ethyl acetate–methanol mixtures with the increasing mole fraction of ethyl acetate. Linear free energy relationship (LFER) investigations confirm that polarity has a major effect on the reaction rate whereas the hydrogen‐bonding ability of the media has a slight effect on it. Nonlinear free energy relationship based on preferential solvation hypothesis showed differences between the microsphere solvation of the solute and the bulk composition of the solvents, and non‐ideal behavior is observed in the trend of the rate coefficients, which cover the LFER results. Copyright © 2011 John Wiley & Sons, Ltd.     

Solvatochromism of catechol derivatives – solute/solvent interactions

The solvatochromism of nine push–pull substituted catechol derivatives has been studied in a set of 39 various solvents. The influence of successive methyl substitution at the catechol OH groups on the extent of the solvatochromic shift has been investigated. The positive solvatochromism of 2‐(3,4‐dihydroxybenzylidene)‐2H‐indene‐1,3‐dione amounts 4360 cm^–1, which ranges from toluene to hexamethyl‐phosphoric triamide. To the best of our knowledge, it is one of the largest positive solvatochromic extent measured for a positive solvatochromic dye, comparable with Brooker's thiobarbituric acid with an extent of 4400 cm^–1. The detailed analyses of the solvatochromism were carried out by alternatively using the Kamlet–Taft and Catalán solvent parameters to achieve information of dipolarity versus polarizability effects of solvent upon solvatochromic properties. In solvents with high β values such as alcohols (0.66 < β < 0.90), amides (0.48 < β < 0.80), dimethyl sulfoxide (β = 0.76), tetramethyl urea (β = 0.80) and hexamethyl‐phosphoric triamide (β = 1.05) UV–Vis absorption spectra show two separate λ_max, which are caused by a deprotonation reaction. The solvatochromic behaviour of the anionic species is compared with those of the catechol derivatives. Copyright © 2012 John Wiley & Sons, Ltd.     

Time‐resolved resonance Raman and density functional theory study of the photochemistry of 4‐benzoylpyridine in acetonitrile and 2‐propanol

A nanosecond time‐resolved resonance Raman (ns‐TR³) spectroscopic investigation of the intermolecular hydrogen‐abstraction reaction of the triplet state of 4‐benzoylpyridine (4‐BPy) in 2‐propanol solvent is reported. The TR³ results reveal a rapid hydrogen abstraction (<10 ns) by the 4‐BPy triplet state (nπ*) with the 2‐propanol solvent, leading to formation of a 4‐BPy ketyl radical and an associated dimethyl ketyl radical partner from the solvent. The recombination of these two radical species occurs with a time constant about 200 ns to produce a para‐N‐LAT (light absorbing transient). The structure, major spectral features, and identification of the ketyl radical and the para‐N‐LAT coupling complex have been determined and confirmed by comparison of the TR³ results with results from density functional theory (DFT) calculations. A reaction pathway for the photolysis of 4‐BPy in 2‐propanol deduced from the TR³ results is also presented. The electron‐withdrawing effect of the heterocyclic nitrogen for 4‐BPy on the triplet state makes it have a significantly higher chemical reactivity for the hydrogen abstraction with 2‐propanol compared to the previously reported corresponding benzophenone triplet reaction under similar reaction conditions. In addition, the 4‐BPy ketyl radical reacts with the dimethyl ketyl radical to attach at the para‐N atom position of the pyridine ring to form a cross‐coupling product such as 2‐[4‐(hydroxy‐phenyl‐methylene)‐4h‐pyridin‐1‐yl]‐propan‐2‐ol instead of attacking at the para‐C atom position as was observed for the corresponding benzophenone reaction reported in an earlier study. Copyright © 2008 John Wiley & Sons, Ltd.     

Positioning solvolyses within the SN2‐SN1 and SN3‐SN2 spectrum of reaction mechanisms

A simple linear regression (Q equation) is devised to position solvolyses within the established S_N2‐S_N1 spectrum of solvolysis mechanisms. Using 2‐adamantyl tosylate as the S_N1 model and methyl tosylate as the S_N2 model, the equation is applied to solvolyses of ethyl, allyl, secondary alkyl and a range of substituted benzyl and benzoyl tosylates. Using 1‐adamantyl chloride as the S_N1 model and methyl tosylate as the S_N2 model, the equation is applied to solvolyses of substituted benzoyl chlorides in weakly nucleophilic media. In some instances, direct correlations with methyl tosylate were employed. Grunwald–Winstein l values and kinetic solvent isotope effects are also used to locate solvolyses within the spectrum of mechanisms. Product selectivities (S) for solvolyses at 50 °C of p‐nitrobenzyl tosylate in binary mixtures of alcohol–water and of alcohol–ethanol for five alcohols (methanol, ethanol, 1‐propanol and 2‐propanol and t‐butanol) are reported and show the expected order of solvent nucleophilicity (RCH₂OH > R₂CHOH > R₃COH). The data support the original assignments establishing the N_OTs scale of solvent nucleophilicity. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of microheterogeneity of CF3CH2OH–H2O mixed solvent on reactions of carbocations from 1,2,2,3‐tetramethyl‐1,2‐dihydroquinoline

Carbocations are key intermediates in many important organic reactions. The remarkable effect of the solvent composition on the kinetic parameters of the carbocation decay and product composition was found in the photolysis of 1,2,2,3‐tetramethyl‐1,2‐dihydroquinoline ( 1 ) in 2,2,2‐trifluoroethanol (TFE)–H₂O mixtures. The rate constant of the intermediate carbocation decay has a maximum, and the activation energy is minimal in the TFE–H₂O mixture 3 : 7 (v/v). In the steady‐state photolysis, products of oligomerization of 1 with n up to 8 and their adducts with TFE and H₂O were identified at this solvent composition. The results were rationalized in terms of TFE clustering in aqueous mixtures, with the maximum of cluster formation at 30 vol % TFE. The clusters form a pseudo‐phase, in which the molecules of 1 are concentrated and the carbocations are generated. TFE, H₂O and 1 compete in the combination reaction with the photogenerated carbocation to afford the products. This effect was not observed for 1,2,2,4‐tetramethyl‐1,2‐dihydroquinoline ( 2 ), the isomer of 1 , due to steric hindrance at C(4) carbon atom of the heterocycle, the active site of the intermediate carbocation, which makes impossible for the carbocation from 2 to react further with 2 . Thus, the kinetic parameters and the product composition in the photolysis of 1 in TFE–H₂O mixtures reflect the changes in the microstructure of the binary solvent. Copyright © 2013 John Wiley & Sons, Ltd.     

Solvation structure of magnesium,zinc, and alkaline earth metal ions in N,N‐dimethylformamide,N,N‐dimethylacetamide,and their mixtures studied by means of Raman spectroscopy and DFT calculations—Ionic size and electronic effects on steric congestion

The solvation structure of magnesium, zinc(II), and alkaline earth metal ions in N,N‐dimethylformamide (DMF) and N,N‐dimethylacetamide (DMA), and their mixtures has been studied by means of Raman spectroscopy and DFT calculations. The solvation number is revealed to be 6, 7, 8, and 8 for Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺, respectively, in both DMF and DMA. The δ (O C N) vibration of DMF shifts to a higher wavenumber upon binding to the metal ions and the shift Δν(= ν_bound − ν_free) becomes larger, when the ionic radius of the metal ion becomes smaller. The ν (N CH₃) vibration of DMA also shifts to a higher wavenumber upon binding to the metal ions. However, the shift Δν saturates for small ions, as well as the transition‐metal (II) ions, implying that steric congestion among solvent molecules takes place in the coordination sphere. It is also indicated that, despite the magnesium ion having practically the same ionic radius as the zinc(II) ion of six‐coordination, their solvation numbers in DMA are significantly different. DFT calculations for these metalsolvate clusters of varying solvation numbers revealed that not only solvent–solvent interaction through space but also the bonding nature of the metal ion plays an essential role in the steric congestion. The individual solvation number and the Raman shift Δν in DMF–DMA mixtures indicate that steric congestion is significant for the magnesium ion, but not appreciable for calcium, strontium, and barium ions, despite the solvation number of these metal ions being large. Copyright © 2006 John Wiley & Sons, Ltd.     

Intramolecular Diels–Alder reaction in enyne–allenes: a computational investigation and comparison with the Myers–Saito and Schmittel reactions

The reaction mechanisms as well as substituted effect and solvent effect of the enyne–allenes are investigated by Density Functional Theory (DFT) method and compared with the Myers–Saito and Schmittel reactions. The Myers–Saito reaction of non‐substituted enyne–allenes is kinetically and thermodynamically favored as compared to the Schmittel reaction; while the concerted [4 + 2] cycloaddition is only 1.32 kcal/mol higher than the C₂? C₇ cyclization and more exothermic (Δ_RE = ?69.38 kcal/mol). For R₁ = CH₃ and t‐Bu, the increasing barrier of the C₂? C₇ cyclization is higher than that for the C₂? C₆ cyclization because of the steric effect, so the increased barrier of the [4 + 2] cycloaddition is affected by such substituted electron‐releasing group. Moreover, the strong steric effect of R₁ = t‐Bu would shift the C₂? C₇ cyclization to the [4 + 2] cycloaddition. On the other hand, for R₁ = Ph, NH₂, O^?, NO₂, and CN substituents, the barrier of the C₂? C₆ cyclization would be more diminished than the C₂? C₇ cyclization due to strong mesomeric effect; the reaction path of C₂? C₇ cyclization would also shift to the [4 + 2] cycloaddition. The solvation does not lead to significant changes in the potential‐energy surface of the reaction except for the more polar surrounding solvent such as dimethyl sulfoxide (DMSO), or water. Copyright © 2009 John Wiley & Sons, Ltd.     

Hydrogen‐bonded nucleophile effects in ANS: the reactions of 1‐chloro and 1‐fluoro‐2,4‐dinitrobenzene with 2‐guanidinobenzimidazole, 1‐(2‐aminoethyl)piperidine and N‐(3‐aminopropyl)morpholine in aprotic solvents

The kinetics of the reactions of 2,4‐dinitrofluorobenzene (DNFB) and 2,4‐dinitrochlorobenzene (DNClB) with 2‐guanidinobenzimidazole (2‐GB) at 40 ± 0.2 °C in dimethylsulphoxide (DMSO), toluene, and in toluene–DMSO mixtures, and with 1‐(2‐aminoethyl)piperidine (2‐AEPip) and N‐(3‐aminopropyl)morpholine (3‐APMo) in toluene at 25 ± 0.2 °C were studied under pseudo first‐order conditions. For the reactions of 2‐GB carried out in pure DMSO, the second‐order rate coefficients were independent of the amine concentration. In contrast, the reactions of 2‐GB with DNFB in toluene, showed a kinetic behaviour consistent with a base‐catalysed decomposition of the zwitterionic intermediate. These results suggest an intramolecular H‐bonding of 2‐GB in toluene, which is not present in DMSO. To confirm this interpretation the reactions were studied in DMSO–toluene mixtures. Small amounts of DMSO produce significant increase in rate that is not expected on the basis of the classical effect of a dipolar aprotic medium; the effect is consistent with the formation of a nucleophile/co‐solvent mixed aggregate. For the reactions of 3‐APMo with both substrates in toluene, the second‐order rate coefficients, k_A, show a linear dependence on the [amine]. 3‐APMo is able to form a six‐membered ring by an intramolecular H‐bond which prevents the formation of self‐aggregates. In contrast, a third order was observed in the reactions with 2‐AEPip: these results can be interpreted as a H‐bonded homo‐aggregate of the amine acting as a better nucleophile than the monomer. Most of these results can be well explained within the frame of the ‘dimer nucleophile’ mechanism. Copyright © 2010 John Wiley & Sons, Ltd.     

Reaction kinetics and solubility in water‐organic binary solutions are governed by similar solvation equilibria

The solvation effects observed in water‐organic solutions were studied by combining data for reaction kinetics and dissolution equilibria by means of a linear free‐energy (similarity) analysis. Kinetic data for the pH‐independent hydrolysis of (4‐methoxyphenyl)‐2,2‐dichloroacetate measured in this work and solubility data for naphthalene, and other substrates of low polarity, in aqueous binary mixtures of methanol, ethanol, acetonitrile, dimethyl sulfoxide (DMSO), and 1,4‐dioxane were used. Linear similarity relationships were discovered for these data over the full range of solvent compositions studied. To gain insight into the similarities observed between these different phenomena, molecular dynamics simulations were carried out for naphthalene and an ester in water–acetonitrile solutions. The results revealed considerable preferential solvation of these substrates by the co‐solvent. Linear relationships between the experimental data and the mole fractions of acetonitrile in the solvation shells of substrates were found. Surprisingly, a linear relationship was found between the mole fractions of acetonitrile in the solvation shells of the ester and naphthalene. This linearity indicated that a similar solvation mechanism governs even such different phenomena as dissolution and reaction kinetics. The relationships between the experimental data and the results of the molecular dynamics calculations found in this work explained the solvent effect observed in water‐organic solutions on the molecular level. Copyright © 2015 John Wiley & Sons, Ltd.     

Pseudo‐homogeneous kinetic model for esterification of acetic acid with propanol isomers over dodecatungstophosphoric acid supported on montmorillonite k10

Esterification of acetic acid with propanol isomers such as isopropanol and n‐propanol was carried out over dodecatungstophosphoric acid (DTPA), dodecamolybdophosphoric acid ammonium salt hydrate, and sodium tungstate hydrated purified supported on montmorillonite K10, which were characterized by powder X‐ray diffraction, Brunauer–Emmett–Teller, and temperature programmed ammonia desorption. A pseudo‐homogeneous (P‐H) kinetic model was established for esterification of acetic acid with propanol isomers over DTPA supported on montmorillonite K10. Effects of various parameters such as reaction time, speed of agitation, particle size, temperature, percent catalyst loading, molar ratio and mixture of propanol isomer were investigated in detail. The 20% (w/w) DTPA/K10 was found to be an optimum solid catalyst with 82% n‐propanol and 53% isopropanol conversion with 100% selectivity toward propyl acetate. The 20% (w/w) DTPA/K10 catalyst was found to be reusable for three cycles. The reaction follows second‐order kinetics with activation energies of 25.53 kJ mol^?1 and 28.15 kJ mol^?1 for isopropanol and n‐propanol, respectively. Pseudo‐homogeneous kinetic model fitted with R² value of trend line 0.999. This implies that esterification reaction is kinetically controlled owing to high activation energy. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐catalyzed cyclization of 2‐alkynyl‐N‐ethanoyl anilines to indoles: synthesis,structural, spectroscopic,and mechanistic study

This study reports a facial regio‐selective synthesis of 2‐alkyl‐N‐ethanoyl indoles from substituted‐N‐ethanoyl anilines employing palladium (II) chloride, which acts as a cyclization catalyst. The mechanistic trait of palladium‐based cyclization is also explored by employing density functional theory. In a two‐step mechanism, the palladium, which attaches to the ethylene carbons, promotes the proton transfer and cyclization. The gas‐phase barrier height of the first transition state is 37 kcal/mol, indicating the rate‐determining step of this reaction. Incorporating acetonitrile through the solvation model on density solvation model reduces the barrier height to 31 kcal/mol. In the presence of solvent, the electron‐releasing (–CH₃) group has a greater influence on the reduction of the barrier height compared with the electron‐withdrawing group (–Cl). These results further confirm that solvent plays an important role on palladium‐catalyzed proton transfer and cyclization. For unveiling structural, spectroscopic, and photophysical properties, experimental and computational studies are also performed. Thermodynamic analysis discloses that these reactions are exothermic. The highest occupied molecular orbital?lowest unoccupied molecular orbital gap (4.9–5.0 eV) confirms that these compounds are more chemically reactive than indole. The calculated UV–Vis spectra by time‐dependent density functional theory exhibit strong peaks at 290, 246, and 232 nm, in good agreement with the experimental results. Moreover, experimental and computed ¹H and ¹³C NMR chemical shifts of the indole derivatives are well correlated. Copyright © 2015 John Wiley & Sons, Ltd.     

The SN3–SN2 spectrum. Rate constants and product selectivities for solvolyses of benzenesulfonyl chlorides in aqueous alcohols

Rate constants for a wide range of binary aqueous mixtures and product selectivities (S) in ethanol–water (EW) and methanol–water (MW) mixtures, are reported at 25 °C for solvolyses of benzenesulfonyl chloride and the 4‐chloro‐derivative. S is defined as follows using molar concentrations: S = ([ester product]/[acid product]) × ([water solvent]/[alcohol solvent]). Additional selectivity data are reported for solvolyses of 4‐Z‐substituted sulfonyl chlorides (Z = OMe, Me, H, Cl and NO₂) in 2,2,2‐trifluoroethanol–water. To explain these results and previously published data on kinetic solvent isotope effects (KSIEs) and on other solvolyses of 4‐nitro and 4‐methoxybenzenesulfonyl chloride, a mechanistic spectrum involving a change from third order to second order is proposed. The molecularity of these reactions is discussed, along with new term ‘S_N3–S_N2 spectrum’ and its connection with the better established term ‘S_N2–S_N1 spectrum’. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetics study of a Diels‐Alder reaction in mixtures of an ionic liquid with molecular solvents

The second‐order rate constants for cycloaddition reaction of cyclopentadiene with naphthoquinone were determined spectrophotometrically in various compositions of 1‐(1‐butyl)‐3‐methylimidazolium terafluoroborate ([bmim]BF₄) with water and methanol at 25 °C. Rate constants of the reaction in pure solvents are in the order of water > [bmim]BF₄ > methanol. Rate constants of the reaction decrease sharply with mole fraction of the ionic liquid in aqueous solutions and increase slightly to a maximum in alcoholic mixtures. Multi‐parameter correlation of logk₂ versus solute–solvent interaction parameters demonstrated that solvophobicity parameter (Sp), hydrogen‐bond donor acidity (α) and hydrogen‐bond acceptor basicity (β) of media are the main factors influencing the reaction rate constant. The proposed three‐parameter model shows that the reaction rate constant increases with Sp, α and β parameters. Copyright © 2008 John Wiley & Sons, Ltd.     

Propanolysis of arenesulfonyl chlorides: Nucleophilic substitution at sulfonyl sulfur

We have studied the mechanism of solvolysis of arenesulfonyl chlorides by propan‐1‐ol and propan‐2‐ol at 303‐323 K. Kinetic profiles were appropriately fit by first‐order kinetics. Reactivity increases with electron‐donating substituents. Ortho‐alkyl substituted derivatives of arenesulfonyl chlorides show increased reactivity, but the origin of this “positive” ortho‐effect remains unclear. Likely, ortho‐methyl groups restrict rotation around the C‐S bond, facilitating the attack of the nucleophile. No relevant reactivity changes have been found with propan‐1‐ol and propan‐2‐ol in terms of nucleophile steric effect. The existence of isokinetic relationships for all substrates suggests a single mechanism for the series. Solvolysis reactions of all substrates in both alcohols show isokinetic temperatures (T_iso) close to the working temperature range, which is an evidence of the process being influenced by secondary reactivity factors, likely of steric nature in the TS. Solvation plays a relevant role in this reaction, modulating the reactivity. In some cases, the presence of t‐Bu instead of Me in para‐ position leads to changes in the first solvation shell, increasing the energy of the reaction (ca. 1 kJ·mol^?1). The obtained results suggest the same kinetic mechanism of solvolysis of arenesulfonyl chlorides for propan‐1‐ol and propan‐2‐ol, as in MeOH and EtOH, where bimolecular nucleophilic substitution (S_N2) takes place with nucleophilic solvent assistance of one alcohol molecule and the participation of the solvent network involving solvent molecules of the first solvation shell.     

Ionic equilibrium in mixtures of protophobic and protophilic polar non‐hydrogen bond donor solvents: acids,salts, and indicators in acetone containing 5 mol% DMSO

Properties of a protophobic polar non‐HBD solvent can be strongly modified by introduction of a small amount of a protophilic polar non‐HBD solvent. In this paper, acetone (AC) with 5 mol% additive of DMSO, a solvent with , was considered as a media for acid–base reactions. Conductance was used for determination of dissociation constants of a set of salts, hydrogen chloride, and picric acid. The last‐named was also studied by UV‐vis spectroscopy. The introduction of 5 mol% of DMSO results in suppressing, to some extent, the homoconjugation processes in AC media as well as of proton hydration by (possible) traces of water. The dissociation of salicylic acid and 2,4‐dinitrophenol was examined utilizing quinhydrone electrodes in a cell with liquid junction. The pK_a values of buffer acids and values of buffer solutions were calculated by taking into account the incomplete dissociation of salts. The response of the glass electrode appeared to be satisfactory, which allowed the estimation of the pK_a value of benzoic acid. The apparent ionization constants of 22 acid–base indicators in buffer mixtures and perchloric acid solutions were determined in (AC + 5 mol% DMSO) using the spectrophotometric procedure. Copyright © 2009 John Wiley & Sons, Ltd.     

一种危险液体混合物的拉曼光谱定性定量识别方法

危险液体混合物的拉曼光谱定性定量分析一直是现场应用难点,为解决该问题,分析了多种物质混合后拉曼光谱的峰位、峰值、峰型变化情况,选取拉曼光谱关键特征峰进行数学简化,构建了从混合物物质成分到混合物拉曼光谱的映射关系,该映射关系描述多种物质成分混合的混合物拉曼特征峰响应只和混合物中各成分本身拉曼特征峰响应以及各物质成分混合比例有关,各物质成分按混合比例贡献拉曼特征谱峰,共同形成最终的混合物拉曼光谱。由该映射关系求逆,可实现从采集到的混合物拉曼光谱计算出各物质成分的混合比例。基于此,设计了危险液体混合物成分定性定量识别方法,主要方法步骤包括,首先进行拉曼光谱数据采集,然后进行拉曼光谱数据处理并获得拉曼特征峰,再进行测试样品与数据谱库标准品的正反向特征峰匹配,如果正反向特征峰匹配系数都比较高,在满足一定阈值条件下,可认定测试样品是某种纯净物,如果不是纯净物,则进入混合物分析,通过拉曼光谱特征峰反向匹配系数筛选,确定混合物成分构成,混合物成分确定后再进行混合物成分比例计算,最终实现危险液体混合物定性定量分析。实验部分,选定丙酮、甲苯、三氯甲烷、乙醇及其混合物进行实验验证,当混合物样品是丙酮、乙醇两种成分按3∶7比例混合时,经拉曼光谱识别方法计算,混合成分计算值是丙酮占比0.245 7,乙醇占比0.706 0;当混合物样品是甲苯、三氯甲烷两种成分按3∶7比例混合时,经拉曼光谱识别方法计算,混合成分计算值是甲苯占比0.323 4,三氯甲烷占比0.763 0;当混合物样品是丙酮、甲苯、乙醇三种成分按4∶3∶3比例混合时,经拉曼光谱识别方法计算,混合成分计算值是丙酮占比0.795 9、甲苯占比0.303 5、乙醇占比0.287 5,实验结果表明,当危险液体混合物成分是两种或三种成分混合时,混合成分计算值基本和实际值吻合,应用危险液体混合物的拉曼光谱定性定量识别方法,可较准确的从拉曼混合光谱中解析出各混合物成分以及各成分在混合物中的比例,可以判断混合物每个拉曼特征谱峰都来自于哪个成分或哪些成分拉曼特征谱峰的混合,谱图解析结果良好,对危险液体混合物现场分析鉴别有较大应用价值。     

Comparative characterization of thermal isomerization rates of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane at convection and microwave heating

Rate constants of thermal isomerization of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane into 1‐(benzyl)‐4,5‐dihydro‐1H‐pyrazole at convection and microwave heating in toluene and chlorobenzene (solvents) were determined within the temperature range 90°C to 120°С. These data were used for the calculation of activation parameters of isomerization. It is shown that microwave heating increases the rate constants at the same temperature by a factor of 2 to 2.5 as compared with those using convection heating. The reason is that the effective temperature of microwave heating exceeds that of convection heating by 6°C to 9°С in toluene and by 12°C to 20°С in chlorobenzene as solvent.     

Tuning Carbon Content and Morphology of FeCo/Graphitic Carbon Core–Shell Nanoparticles using a Salt‐Matrix‐Assisted CVD Process

Large‐scale and tunable synthesis of FeCo/graphitic carbon (FeCo/GC) core–shell nanoparticles as a promising material for multipurpose biomedical applications is reported. The high‐quality graphitic structure of the carbon shells is demonstrated through high‐resolution transmission electron microscopy (HRTEM), X‐ray diffraction (XRD), and Raman spectroscopy. A saturation magnetization of 80.2 emu g^?1 is reached for the pure FeCo/GC core–shell nanoparticles. A decrease in the saturation magnetization of the samples is observed with an increase in their carbon content with different carbon morphologies evolved in the process. It is also shown how hybrid nanostructures, including mixtures of the FeCo/GC nanoparticles and multi‐walled carbon nanotubes (MWNTs) or carbon nanorods (CNRs), can be obtained only by manipulation of the carbon‐bearing gas flow rate.