Evolution of pores in mesoporous silica films: Porogen loading effect

Mesoporous silica films were synthesized via a sol-gel process under an acidic condition. Various amounts of triblock copolymer F38 were loaded to precursor sols as the pore generator. The evolution of the pores generated by porogen decomposition was investigated as a function of F38 loading by positron annihilation gamma-ray energy spectroscopy and positron annihilation lifetime spectroscopy based on slow positron beams. The threshold of pore percolation is found to be around 10 wt% of F38 loading by positron annihilation gamma-ray energy spectroscopy. Positron annihilation lifetime spectroscopy in the films show that the pore size increases from 1 nm to 3 nm with increasing F38 loading from 5 wt% to 30 wt%.     

Mesoporous titania films investigated by positron annihilation based on a slow positron beam

Tunable mesoporous titania (TiO₂) thin films were synthesized via a sol-gel method using an amphiphilic triblock copolymer F38 as the structural template. The dependence of crystalization, pore morphology and interconnectivity of TiO₂ films on the weight ratio of F38 was studied by wide-angle X-ray diffraction, field emission scanning electron microscopy and Doppler broadening of positron annihilation radiation spectroscopy based on a slow positron beam. By loading more F38, the crystallization of TiO₂ films is enhanced, accompanied by a decrement in oxygen vacancies/grain boundaries. Smaller and isolated mesopores are formed in the films prepared with F38 less than 15?wt%. The pore percolation occurs when the weight ratio of F38 is up to 20?wt% and larger and interconnected worm-like pores are formed.     

介孔SiO2薄膜孔结构的慢正电子技术表征

通过蒸发诱导自组装技术制备了具有不同有序结构的介孔SiO₂薄膜,并采用同步辐射X射线反射率以及慢正电子束流技术对其进行表征.实验结果表明,随着旋涂速率的增加,介孔结构由三维立方向二维六角结构转变,同时平均孔隙率随转速增加而减小.利用各向同性无机孔收缩模型和Fourier变换红外光谱,探讨了薄膜结构和正电子湮没参数的内在联系. 关键词： 同步辐射 X射线反射率 Doppler展宽 正电子素飞行时间谱     

Positron annihilation studies of mesoporous silica films using a slow positron beam

Positron annihilation lifetime spectra were measured for mesoporous silica films, which were synthesized using triblock copolymer (EO₁₀₆PO₇₀EO₁₀₆) as a structure-directing agent. Different positron lifetime spectra for the deposited and calcined films indicated the formation of meso-structure after calcination, which was confirmed by Fourier transform infrared (FTIR) spectra and field emission-scanning electron microscopy (FE-SEM) observation. Open porosity or pore interconnectivity of a silica film might be evaluated by a two-dimensional positron annihilation lifetime spectrum of an uncapped film. Pore sizes and their distributions in the silica films were found to be affected by thermal treatments.     

Orthopositronium annihilation and emission in mesostructured thin silica and silicalite-1 films

Mesoporous silica films and MFI-type pure silica zeolite films were investigated using slow positrons. Detection of the 3γ annihilation fraction was used as a quick test to estimate the emission of orthopositronium (o-Ps) into vacuum. Positronium time-of-flight (TOF) spectroscopy, combined with Monte-Carlo simulation of the detection system was used to determine the energy of o-Ps emitted from the films. Evidence for an efficient o-Ps emission was found in both the mesoporous and silicalite-1. A 3γ fraction in the range of 31-36 % was found in the films with the highest o-Ps yield in each type of porous material, indicating that 40-50 % of the implanted positrons form positronium in the pore systems with very different pore sizes. Time-of-flight measurements showed that the energy of the orthopositronium emitted into vacuum is below 100 meV in the film with 2-3 nm pores at 3 keV positron energy, indicating an efficient slowing down but no complete thermalization in the porous films of 300-400 nm thickness.     

金刚石膜微结构的慢正电子束测量研究

用慢正电子束辅助以拉曼光谱方法对一批较高质量的PECVD金刚石膜的微结构进行测量研究．拉曼光谱实验结果显示,这批金刚石膜中金刚石相含量比较高,正电子湮没实验进一步从微观结构上指出各个金刚石膜之间存在很大差异,并且从缺陷角度发现各样品中缺陷尺寸和缺陷浓度不一样,造成膜质量不同．S-E曲线变化趋势反映出各样品金刚石晶体结构存在明显不同．这表明正电子湮没技术是测量金刚石膜微结构的有力手段．     

Free volumes evolution during desorption of n-heptane from silica with regular pore geometry. Positron annihilation study

The mechanism of n-heptane evaporation from mesoporous MCM-41 silica was investigated by positron annihilation lifetime spectroscopy (PALS). Experiments were performed in situ during desorption of hydrocarbon under stepwise lowered pressure. Desorption is a quasicontinuous process that corresponds to emptying various types of free volumes in the silica/n-heptane system, including mesopores. Insight into the kinetics of desorption was derived from the changes of PALS spectra associated with succeeding stages of pore emptying. For the investigated system emptying of pores and formation of bubbles in the n-heptane condensate present in regular pores were found to take place at various bulk saturating vapour pressure of the fluid.     

Applications of slow positrons to cancer research: Search for selectivity of positron annihilation to skin cancer

Slow positrons and positron annihilation spectroscopy (PAS) have been applied to medical research in searching for positron annihilation selectivity to cancer cells. We report the results of positron lifetime and Doppler broadening energy spectroscopies in human skin samples with and without cancer as a function of positron incident energy (up to 8 μm depth) and found that the positronium annihilates at a significantly lower rate and forms at a lower probability in the samples having either basal cell carcinoma (BCC) or squamous cell carcinoma (SCC) than in the normal skin. The significant selectivity of positron annihilation to skin cancer may open a new research area of developing positron annihilation spectroscopy as a novel medical tool to detect cancer formation externally and non-invasively at the early stages.     

Oxidation and thermal reduction of the Cu(1 0 0) surface as studied using positron annihilation induced Auger electron spectroscopy (PAES)

Changes in the surface of an oxidized Cu(1 0 0) single crystal resulting from vacuum annealing have been investigated using positron annihilation induced Auger electron spectroscopy (PAES). PAES measurements show a large increase in the intensity of the annihilation induced Cu M_2,3VV Auger peak as the sample is subjected to a series of isochronal anneals in vacuum up to annealing temperature 300 °C. The intensity then decreases monotonically as the annealing temperature is increased to ∼600 °C. Experimental probabilities of annihilation of surface-trapped positrons with Cu 3p and O 1s core-level electrons are estimated from the measured intensities of the positron annihilation induced Cu M_2,3VV and O KLL Auger transitions. Experimental PAES results are analyzed by performing calculations of positron surface states and annihilation probabilities of surface-trapped positrons with relevant core electrons taking into account the charge redistribution at the surface, surface reconstructions, and electron-positron correlations effects. The effects of oxygen adsorption on localization of positron surface state wave function and annihilation characteristics are also analyzed. Possible explanation is proposed for the observed behavior of the intensity of positron annihilation induced Cu M_2,3VV and O KLL Auger peaks and probabilities of annihilation of surface-trapped positrons with Cu 3p and O 1s core-level electrons with changes of the annealing temperature.     

The Analysis of 3γ/2γ in the Measurement of Positron Annihilation Doppler-broadening Spectroscopy

Doppler-broadening slow positron annihilation spectroscopy is used to measure the concentration, spatial distribution, and size of open-volume defects in surface and interface of material. In this method, the quantitative evaluation is generally carried out with the line shape parameter S and W, but sometimes the parameters provide some finite information. For example, if positron and electron form positronium (include o-Ps and p-Ps) in material, the parameters S and W may provide little information about positronium even complicate the analyses. A parameter I_3γ, defined as o-Ps self-decay intensity, was used to analyze Ag layer capped and non-capped silica aerogel by slow positron annihilation Doppler -broadening spectroscopy. The result shows that I_3γ can provide more information for researching mesoporous material and nanometer film.     

Investigation of nanocrystalline CoFe 2 O 4 by positron annihilation lifetime spectroscopy

Nanoparticles of cobalt ferrite prepared by the co-precipitation method with crystallite size varying from 4.7 to 41 nm have been characterized by positron annihilation lifetime spectroscopy. Three lifetime components are fitted to the lifetime data. The shortest lifetime component is attributed to the delocalized positron lifetime shortened by defect trapping. The intermediate lifetime is assigned to the positron annihilation in diffuse vacancy clusters or microvoids at the grain boundaries and at the grain-boundary triple points. The longest component corresponds to the pick-off annihilation of ortho-positronium formed at the larger voids. The variations in these lifetimes and their relative intensities with annealing temperature and crystallite size have been studied in detail.     

Chemical quenching of positronium in Fe2O3/Al2O3 catalysts

Fe₂O₃/Al₂O₃ catalysts were prepared by solid state reaction method using α-Fe₂O₃ and γ-Al₂O₃ nano powders. The microstructure and surface properties of the catalyst were studied using positron lifetime and coincidence Doppler broadening annihilation radiation measurements. The positron lifetime spectrum shows four components. The two long lifetimes τ₃ and τ₄ are attributed to positronium annihilation in two types of pores distributed inside Al₂O₃ grain and between the grains, respectively. With increasing Fe₂O₃ content from 3 wt% to 40 wt%, the lifetime τ₃ keeps nearly unchanged, while the longest lifetime τ₄ shows decrease from 96 ns to 64 ns. Its intensity decreases drastically from 24% to less than 8%. The Doppler broadening S parameter shows also a continuous decrease. Further analysis of the Doppler broadening spectra reveals a decrease in the p-Ps intensity with increasing Fe₂O₃ content, which rules out the possibility of spin-conversion of positronium. Therefore the decrease of τ₄ is most probably due to the chemical quenching reaction of positronium with Fe ions on the surface of the large pores.     

Evolution of Structural Defects in SiOx Films Fabricated by Electron Cyclotron Resonance Plasma Chemical Vapour Deposition upon Annealing Treatment

We study the structural defects in the SiO, film prepared by electron cyclotron resonance plasma chemical vapour deposition and annealing recovery evolution. The photoluminescence property is observed in the as-deposited and annealed samples. [-SiO3]^2- defects are the luminescence centres of the ultraviolet photoluminescence （PL） from the Fourier transform infrared spectroscopy and PL measurements. [-SiO3]^2- is observed by positron annihilation spectroscopy, and this defect can make the S parameters increase. After 1000℃ annealing, [-SiO3]^2- defects still exist in the films.     

Spin-polarization of an electro-static positron beam

We constructed an electro-static positron beam apparatus. We fabricated a simple spin-polarimeter composed of a permanent magnet with a surface magnetic field of 0.65 T and an iron pole piece. The longitudinal spin-polarization of the positron beam was determined to be 0.3 by analyzing the magnetic field dependence of the Doppler broadening of annihilation radiation from a fused silica specimen. The effect of spin rotation was examined using an iron poly-crystal and a simple E × B filter.     

Positron annihilation in gamma irradiated crystals

The angular correlation between the two gamma-quanta arising from positron annihilation in untreated and gamma-irradiated alkali halides is reported. For low level gamma irradiation the percentage of positrons annihilating with F-centre electrons is not very significant. When the F-centre concentration is increased to as much as 1.5 × 10¹⁷ per cm³, about 15 per cent of positrons annihilate with F-centre electrons. The angular correlation curve becomes progressively narrower with increase in F-centre concentration. Positrons annihilating in gamma-irradiated crystals reduce the F-centre considerably. The results of a systematic investigation on F-centre bleaching by positron annihilation are reported.     

Thermal,dielectric and conductivity studies on PVA/Ionic liquid [EMIM][EtSO4] based polymer electrolytes

Polymer electrolyte films of (PVA+15 wt% LiClO₄)+x wt% Ionic liquid (IL) 1-ethyl-3-methylimidazolium ethylsulfate [EMIM][EtSO₄] (x=0, 5, 10, 15) were prepared by solution cast technique. These films were characterized using TGA, DSC, XRD and ac impedance spectroscopic techniques. XRD result shows that amorphosity increases as the amount of the IL in PVA+salt (LiClO₄) is increased. DSC results confirm the same (except (PVA+15 wt% LiClO₄)+10 wt% IL). The dielectric and conductivity measurements were carried out on these films as a function of frequency and temperature. The addition of IL significantly improved the ionic conductivity of polymer electrolytes. Relaxation frequency vs. temperature plot for (PVA+15 wt% LiClO₄)+x wt% IL were found to follow an Arrhenius nature. The dielectric behavior was analyzed using real and imaginary parts of dielectric constant, dielectric loss tangent (tan δ) and electric modulus (M′ and M″).     

用正电子研究NaCl在NaY沸石上的固溶过程

用正电子湮没谱学研究NaCl与NaY沸石机械混合后, NaCl在NaY中的固溶扩散过程.分别测量不同质量比的NaCl/NaY［(1—20)%］经500℃烘烤1h，NaCl/NaY(15%)经不同温度烘烤1h,以及NaCl/NaY(15%)经500℃烘烤不同时间后的正电子寿命谱.所有寿命谱都出现了5个寿命分量, 其中第3，4，5寿命分别与β笼、超笼及沸石微粒界面空洞的大小和数量相关.实验表明正电子湮没谱学能敏感地表征NaCl在NaY中的固溶扩散过程. 关键词： 正电子湮没谱学 氯化钠 沸石     

MoO3/Al2O3催化剂中Mo分散的正电子研究

用浸渍法制备了一系列不同Mo含量的MoO₃/Al₂O₃催化剂.测量了这些样品的正电子湮没寿命谱(PALS)与符合多普勒展宽(CDB)谱,以研究其孔洞结构以及Mo分散.正电子寿命测量结果表明,Al₂O₃载体中存在两种不同尺寸的孔洞.掺入MoO₃之后,Mo原子主要进入Al₂O₃的大孔中,使孔洞体积减小.符合多普勒展宽谱结果表明,当MoO 关键词： 3/Al₂O₃催化剂')" href="#">MoO₃/Al₂O₃催化剂 正电子湮没寿命谱 符合多普勒展宽 Mo 分散     

Probing polymer nanocomposite morphology by small angle neutron scattering

Polyamide nanocomposite films were prepared from nanometer-sized silica particles having particle radius of gyration (R _g) of about 66 Å and trimesoyl chloride-m-phenylene diamine-based polyamides having macromolecular units of about 100–140 Å. The nanoscale morphology of the samples was characterized using small angle neutron scattering (SANS). SANS reveals that silica nanoparticles interact well with the polyamide units only at limited silica loading.     

Slow positron beam study of corrosion-related defects in pure iron

Corrosion-related defects of pure iron were investigated by measuring Doppler broadening energy spectra (DBES) of positron annihilation and positron annihilation lifetime (PAL). Defect profiles of the S-parameter from DBES as a function of positron incident energy up to 30 keV (i.e. ∼1 μm depth) were analyzed. The DBES data show that S-parameter increases as a function of positron incident energy (mean depth) after corrosion, and the increase in the S-parameter is larger near the surface than in the bulk due to corrosion. Furthermore, information on defect size from PAL data as a function of positron incident energy up to 10 keV (i.e. ∼0.2 μm depth) was analyzed. In the two-state trapping model, the lifetime τ₂ = 500 ps is ascribed to annihilation of positrons in voids with a size of the order of nanometer. τ₁, which decreases with depth from the surface to the bulk, is ascribed to the annihilation of positrons in dislocations and three-dimensional vacancy clusters. The corroded samples show a significant increase in τ₁ and the intensity I₂, and near the surface the corroded iron introduces both voids and large-size three-dimensional vacancy clusters. The size of vacancy clusters decreases with depth.