Ag-Au二元纳米微粒吸收谱的计算

纳米微粒的光学性能与其表面等离子体共振关系密切.本文利用推广的Mie理论计算研究了Au-Ag体系单质、合金以及核壳结构纳米颗粒的消光、吸收和散射的性能(包括壳核结构Ag-Au微粒在紫外-可见光的吸收性能),计算结果与实验值相符合得很好.研究表明,随着粒径的增加,微粒表面等离子体共振偶极吸收峰出现红移,波峰位置与纳米微粒的尺寸具有线性关系.壳核结构中,粒径与核壳比决定了整个微粒的吸收性能.进一步研究表明,当Au壳层较薄时,可以获得具有可调光学性能的壳核纳米结构;而当Au壳层较厚时,其光学性能与同尺寸单质Au微粒一致.通过计算分析,本文还将Mie理论推广到具有空腔结构并且壳层厚度达到一定值的纳米微粒.另外,研究发现合金结构纳米微粒的吸收峰位置与合金成分有着线性关系.本研究表明,人们可以通过控制纳米微粒的尺寸、形貌和结构,调节其表面等离子体共振峰位,这大大拓展了纳米微粒的应用范围.     

不同Ag壳厚度Au@Ag纳米粒子的调控制备表征及表面增强拉曼光谱的效应

采用化学还原法制备了以Au为核、包覆Ag的双金属核壳Au@Ag纳米粒子,并成功地用于表面增强拉曼光谱(SERS)分析测试。通过改变制备液中Ag/Au的量比来调控Ag壳包覆厚度。采用透射电子显微镜(TEM)和紫外-可见光谱仪(UV-Vis)对Au@Ag纳米粒子的构貌进行表征。TEM显示明显存在核壳结构,且Ag壳层随Ag/Au的量比的增加而逐渐变厚;UV-Vis表明随着Ag/Au的量比的增加,Au@Ag纳米粒子出现了Au核与Ag壳吸收峰的2个等离子体共振峰,同时伴随着Au峰的蓝移和Ag峰的红移。以双甲脒为分析物,考察了不同Ag/Au的量比时的Au@Ag纳米粒子的SERS活性。结果表明,SERS活性随Ag/Au的量比的增加先增大后减小,在6∶5时其SERS增强效应最佳,此时Ag壳厚度约为6 nm。以对巯基苯胺(4-ATP)、结晶紫(CV)和双甲脒为分析测试对象,对比了Au@Ag、Ag、Au 3种基底的SERS活性。结果表明,所制备的Au@Ag纳米粒子的SERS活性要明显优于单纯的Au、Ag纳米粒子。     

Fe2O3/Au/Ag磁性核壳纳米粒子的制备及其SERS研究

本文介绍了一种制备多功能磁性Fe2O3/Au/Ag纳米粒子的简捷方法, 制备的粒子直径大约在100 nm左右, 采用UV-vis和SEM对该结构进行了表征。并通过调节硝酸银的用量, 制备了一系列具有不同壳层厚度和表面结构的多重核壳纳米粒子。以苯硫酚(TP)为探针分子, 研究了不同银壳厚度的磁性纳米粒子的表面增强拉曼散射(SERS)活性。结果表明随Ag:Au比例的不断增加, 其SERS活性呈现先增大后减小的趋势, 这与表面结构的改变有关。     

Au@Pt-NPs/GC修饰电极对亚硝酸根的电催化性质

采用电化学沉积法直接制备了Au@Pt核壳纳米粒子玻碳修饰电极(Au@Pt-NPs/GC CME),通过改变合成双金属纳米粒子时的Au、Pt材料比例,考察不同材料比例的Au@Pt双金属纳米粒子修饰电极对亚硝酸根离子(NOf)的电催化氧化行为,研究表明金和铂之间存在协同催化作用,使Au@Pt-NPs比单独铂和金纳米粒子具有...     

水溶性CdTe/CdS纳米晶表面SiO2壳层的反相胶束法包覆

"提出了一种水相中制备CdTe/CdS核壳结构纳米粒子的方法.用Te粉作为碲源,用Na2S作为硫源,在50 ℃下制备了CdTe/CdS核壳结构纳米粒子. 用紫外可见吸收光谱和荧光光谱分析了CdS壳层对CdTe核的影响. 随CdS壳层厚度的增加,紫外可见吸收光谱和荧光光谱均发生了红移. CdS壳层厚度较薄时,CdTe/CdS纳米晶的荧光强度较CdTe纳米粒子有显著提高;而CdS壳层厚度较厚时,CdTe/CdS纳米晶的荧光强度会逐渐降低. 用反相胶束法在CdTe/CdS核壳结构纳米粒子的表面包被一层SiO2,     

Cu/C核/壳纳米结构的气相合成、形成机理及其光学性能研究

采用乙酰丙酮铜为原料, 通过化学气相沉积大批量制备出Cu/C核/壳纳米颗粒和纳米线. 研究结果表明, 通过控制沉积温度可对Cu/C核/壳纳米材料的形貌和结构进行很好的控制. 比如, 沉积温度为400 ℃时可获得直径约200 nm的Cu/C核/壳纳米线, 沉积温度为450 ℃ 时可获得直径约200 nm的Cu/C核/壳纳米颗粒和纳米棒的混合产物, 沉积温度为600 ℃时可获得直径约22 nm的Cu/C核/壳纳米颗粒. 获得的Cu/C核/壳纳米结构是由一个新颖的凝聚机理形成的, 而这种机理不同于著名的溶解-析出机理. 紫外-可见光谱和荧光光谱分析结果表明: Cu/C核/壳纳米线和纳米颗粒均在225 nm处出现Cu的吸收峰, 同时在620 和616 nm处分别出现了纳米线和纳米颗粒的表面等离子共振吸收峰. Cu/C核/壳纳米线在312 和348 nm处、 Cu/C核/壳纳米颗粒在304 和345 nm处出现荧光发射谱峰. 关键词： Cu/C核/壳结构 纳米线 纳米颗粒 光学性能     

银/二氧化钛核壳纳米颗粒对碲化镉纳米晶的荧光增强研究

利用新合成的复合纳米结构银/二氧化钛核壳纳米颗粒,研究了金属银纳米颗粒对碲化镉纳米晶层荧光的增强情况.结果表明,这种新型复合金属纳米结构能极大地增强发光纳米晶层的荧光强度.银/二氧化钛核壳纳米颗粒是以水合肼、硝酸银和四异丙氧基钛为原材料,利用胶体化学法在水溶液中合成.透射电子显微镜图片表明这种新合成的银/二氧化钛纳米材料基本上呈球形,有较为明显的核壳结构,中间黑色的核是银纳米颗粒,外层颜色较浅部分是二氧化钛壳层.另外,包裹二氧化钛壳层后,银纳米颗粒的表面等离子吸收带从409 nm红移至430 nm,也证实了这种新型核壳纳米材料的形成.将此合成方法得到的银/二氧化钛纳米颗粒和碲化镉纳米晶用旋转涂覆方法进行直接组合后,得到了银纳米颗粒对碲化镉纳米晶荧光的明显增强,并对其增强的物理过程进行了讨论.这种能够增强荧光团发光的新型复合银纳米结构将在发光器件、荧光成像、生物探测等方面具有一定的应用价值.     

壳层纳米颗粒的光散射行为研究

本文主要研究了Au-Si球型壳层纳米颗粒在电磁波作用下的散射行为,并将其与实心Au球、空心Au球、实心Si球和空心Si球的光散射行为进行了对比。利用Mie散射理论计算得出Au-Si球型壳层纳米颗粒在外加电磁波作用下的各阶电响应和磁响应,观察壳层结构的几何参数对电偶和磁偶共振峰位置的影响,并进一步研究Au材料中的电偶响应与Si材料中的电偶(磁偶)响应之间的耦合关系,找到其中的耦合规律。通过对单个球型壳层纳米颗粒散射行为的研究,为利用该颗粒周期性排列制备具有特殊电磁性质的人工特异材料提供理论指导。     

Au/SiO2纳米复合薄膜的微结构及光吸收特性研究

用多靶磁控溅射技术制备了Au/SiO₂纳米多层薄膜.利用透射电子显微镜以及吸 收光谱对Au/SiO₂复合薄膜的微观结构、表面形貌及光学性能进行了表征和测试 .研究结果表明：单层Au/SiO₂薄膜中Au沉积时间小于10s时，分散在SiO_{2< /sub>中的Au颗粒随Au的沉积时间的延长而增大；当沉积时间超过10s后，Au颗粒的尺寸几乎 不随沉积时间变化，但Au颗粒的形状由网络状结构变为薄膜状结构.［Au(t1关键词： 尺寸效应 纳米复合薄膜 吸收光谱 有效媒质理论}     

金纳米棒核/贵金属壳杂化纳米结构的可控制备和性质调控

贵金属纳米颗粒由于其独特的光学及催化性能引起了人们的广泛关注,而这些性能与纳米颗粒的尺寸、形貌、结构组成等密切相关.目前如何有意识地控制晶体生长过程,以得到人们需要的纳米结构和组成,仍具有相当大的挑战性.文章重点介绍了利用具有特定形貌和晶面组成的金纳米棒（Au nanorods）作为种子,借助形成核/壳结构,诱导了Ag...     

Structural analysis of sonochemically prepared Au/Pd nanoparticles dispersed in porous silica matrix

Bimetallic Au/Pd nanoparticles supported on a silica matrix were prepared by an ultrasonic technique. The samples heat-treated at 100, 200, 300 and 400 degrees C were examined with techniques of XRD (X-ray diffraction), TEM and XAS (X-ray absorption spectrometry) for studying correlation between their structure and the catalytic activity of hydrogenation of cyclohexene. Even after the heat treatment at 400 degrees C, the particles were smaller than 20 nm and well dispersed in the matrix without agglomeration nor sintering. Results of the XRD, TEM and XAS indicated that the as-prepared particles have a core/shell structure of Au/Pd and transform into a random alloy at 300 degrees C. The catalysis seemed to be deactivated by alloying.     

Size‐Dependence of the Melting Temperature of Individual Au Nanoparticles

Nanoparticles have an immense importance in various fields, such as medicine, catalysis, and various technological applications. Nanoparticles exhibit a significant depression in melting point as their size goes below ≈10 nm. However, nanoparticles are frequently used in high temperature applications such as catalysis where temperatures often exceed several 100 degrees which makes it interesting to study not only the melting temperature depression, but also how the melting progresses through the particle. Using high‐resolution transmission electron microscopy, the melting process of gold nanoparticles in the size range of 2–20 nm Au nanoparticles combined with molecular dynamics studies is investigated. A linear dependence of the melting temperature on the inverse particle size is confirmed; electron microscopy imaging reveals that the particles start melting at the surface and the liquid shell formed then rapidly expands to the particle core.     

Plasmonics properties of trimetallic Al@Al2O3@Ag@Au and Al@Al2O3@AuAg nanostructures

Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric–metal–metal (DMM) system consisting of a particle with a dielectric core (Al@Al₂O₃), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al₂O₃@Ag@Au and Al@Al₂O₃@AgAu triple-layered core–shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core–shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core–shell Al@Al₂O₃. The Al@Al₂O₃ particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al₂O₃@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al₂O₃@Ag@Au core–shell or Al@Al₂O₃@AgAu alloy. The formation of core–shell and alloy nanostructure was confirmed by UV–visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400–520 nm with increasing ablation time suggesting formation of Ag–Au alloy in the presence of alumina particles in the solution.     

Preparation of functionalized platinum nanoparticles: a comparison of different methods and reagents

Au–Pd core–shell nanocubes and triangular nanoparticles were systematically synthesized from a few Pd layers up to fully grown morphologies by a modified seed-mediated growth method. The shape evolution of Au–Pd core–shell nanoparticles from single crystal and singly twinned seed to final concave nanocube and triangular plates are presented at atomic level by Cs-corrected scanning transmission electron microscopy (STEM). The growth mechanism of both morphologies was studied throughout different sizes. It was found that the concave nanocubes grew from octahedral Au seeds due to fast growth along 〈111〉 directions; while the triangular nanoparticles grew from singly twinned Au seeds, growing twice as fast in 〈110〉 directions along the twin boundary; compared to the 〈111〉 direction perpendicular to the twin boundary. Both the concave nanocubes and triangular nanoparticles presented high index facet (HIF) surfaces that will increase the catalytic activity of different reactions.     

Highly Enhanced Emission of Visible Light from Core–Dual‐Shell‐Type Hybridized Nanoparticles

Core–dual‐shell‐type hybridized nanoparticles (NPs) having Au‐core/dye‐doped silica inner shell/Au outer shell are successfully fabricated by developing a biphasic process that is a kind of so‐called “one‐pot” method. The resulting hybridized NPs exhibit evidently about 20‐fold enhancement of fluorescence intensity, increase in fluorescence quantum yield, and decrease in fluorescence lifetime. These effects depend on the metal nanostructure being optimized, compared with the reference hybridized NPs with neither a Au‐core nor a Au outer shell, due to the gap‐mode effect induced by localized surface plasmon resonance in the core–dual‐shell‐type MIM‐like nanostructure. More detailed elucidation concerning the enhancement mechanism will provide the possibility of photonic device application, for example as a high‐performance point light source, nanolaser, or sensor for bioimaging in the visible region in the near future.     

Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe³⁺ and Fe²⁺], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (∼4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe₃O₄ core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core–shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core–shell nanostructure.     

A novel two-phase thermal approach for synthesizing CdSe/CdS core/shell nanostructure

CdSe/CdS core/shell nanocrystals have been synthesized through a low cost and simple two-phase thermal route. The optical spectroscopy and structural characterization evidenced the core/shell structure of the CdSe/CdS nanoparticles. The X-ray diffraction patterns of CdSe and CdSe/CdS nanoparticles exhibited peak positions corresponding to those of their bulk cubic crystal structures. The X-ray photoelectron spectroscopy data confirmed the elemental composition of the CdSe/CdS nanoparticles. The absorption spectra of core/shell nanoparticles showed red shift with respect to the core CdSe nanoparticles. The photoluminescence study indicates that the intensity of the emission maximum is considerably increased in the core/shell structure as compared with the parent material, and the capping of CdS nanoparticles with CdSe material exhibit a near band-edge emission, indicating a successful passivation by removing surface defects. The high-resolution transmission microscope images of the bare and core/shell nanoparticles ascertained the monodispersed and well-defined spherical particles. The average particle sizes for CdSe and CdSe/CdS nanoparticles are 2.5 and 5 nm, respectively, thus confirming, the larger diameter of CdSe/CdS core/shell nanostructure than the core CdSe nanoparticles.     

Study of Au-Pd core-shell nanoparticles by using slow positron beam

Binary Au-Pd nanoparticles were synthesized by ultrasonic irradiation of solutions containing Au³⁺ and Pd²⁺ ions (the ion ratio from 0.3:0.7 to 0.9:0.1 mM) and cationic surfactant (SDS: sodium dodecyl sulfate). In each case the core-shell structure (Au core, Pd shell) was confirmed by scanning transmission electron microscopy (STEM). The mean diameters of them were all about 9 nm, and the thickness of the Pd shell depends on the ratio of Pd²⁺ and Au³⁺ ions in solution. In order to study the electronic states of core-shell nanoparticles and their dependence on shell thickness, Doppler broadening measurements were performed for Au-Pd core-shell nanoparticles by using slow positron beam technique. The ratio curves of Au-Pd particles did not match with those of pure Pd and pure Au, but a small difference in the low electron momentum region was observed among nanoparticles depending on Pd shell thickness.     

Light scattering calculations from Au and Au/SiO2 core/shell nanoparticles

Given the importance of the optical properties of Au and Au/SiO₂ core/shell nanoparticles, in this article we focus our attention on the light scattering properties of such systems and on a relative comparison. In particular, we report theoretical results of angle-dependent light scattering intensity and scattering efficiency for Au and Au/SiO₂ core/shell nanoparticles increasing the Au particle radius from 30 to 130 nm, and for Au/SiO₂ core/shell particles changing the core-to-shell sizes ratio. Finally, a comparison between the scattering efficiency of the Au and Au/SiO₂ core/shell nanoparticles is drawn. The results of this work can be used in the design of tunable efficiency light scattering devices (biological and molecular sensors, solar cells).