Measurement of the friction coefficient of a fluctuating contact line using an AFM-based dual-mode mechanical resonator

A dual-mode mechanical resonator using an atomic force microscope （AFM） as a force sensor is developed. The resonator consists of a long vertical glass fiber with one end glued onto a rectangular cantilever beam and the other end immersed through a liquid-air interface. By measuring the resonant spectrum of the modified AFM cantilever, one is able to accurately determine the longitudinal friction coefficient ξv along the fiber axis associated with the vertical oscillation of the hanging fiber and the traversal friction coefficient ξh perpendicular to the fiber axis associated with the horizontal swing of the fiber around its joint with the cantilever. The technique is tested by measurement of the friction coefficient of a fluctuating （and slipping） contact line between the glass fiber and the liquid interface. The experiment verifies the theory and demonstrates its applications. The dual-mode mechanical resonator provides a powerful tool for the study of the contact line dynamics and the rheological property of anisotropic fluids.     

Nitriding molybdenum： Effects of duration and fill gas pressure when using lO0-Hz pulse DC discharge technique

Molybdenum is nitrided by a 100-Hz pulsed DC glow discharge technique for various time durations and fill gas pressures to study the effects on the surface properties of molybdenum. X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, and atomic force microscopy （AFM） are used for the structural and morphological analysis of the nitrided layers. Vickers＇ microhardness tester is utilized to investigate surface microhardness. Phase analysis shows the formation of more molybdenum nitride molecules for longer nitriding durations at fill gas pressures of 2 mbar and 3 mbar （1 bar = 105 Pa）. A considerable increase in surface microhardness （approximately by a factor of 2） is observed for longer duration （10 h） and 2-mbar pressure. Longer duration （10 h） and 2-mbar fill gas pressure favors the formation of homogeneous, smooth, hard layers by the incorporation of more nitrogen.     

Comparison between global phenomenological and microscopic optical potentials for proton as projectile below 100 MeV

For 112 target nuclei （52 elements） with proton as projectile, we calculate the reaction cross sections and elastic scattering angular distributions, as well as the X^2 values for 16 kinds of proton optical model potentials： two sets of phenomenological global optical potentials and the microscopic optical potentials proposed by Shen et al for 14 sets of Skyrme force parameters： GSI-6, SBJS, SKM, SGI-Ⅱ, SKa-b, SCOI-Ⅱ. We find that for obtaining the proton microscopic optical potential based on the nuclear matter approach with Skyrme force, SGI, SKa and SKb are the three sets of optimal Skyrme force parameters.     

Study on the Lorentz detuning and tuning of β=0.3, 352 MHz spoke cavity

The superconducting spoke cavity has been proposed to accelerate the proton in the low energy section of the high power proton linac for the Accelerator Driven Sub-critical System in China. In this paper, the basic geometric and RF parameters of a β=0.3, 352 MHz spoke cavity are given, and the Lorenz detuning and tuning are presented.     

Nonequilibrium behavior of the kinetic metamagnetic spin-5/2 Blume–Capel model

The dynamic magnetic behavior of the kinetic metamagnetic spin-5/2 Blume–Capel model is examined, within a mean-field approach, under a time-dependent oscillating magnetic field. To describe the kinetics of the system, Glaubertype stochastic dynamics has been utilized. The mean-field dynamic equations of the model are obtained from the Master equation. Firstly, these dynamic equations are solved to find the phases in the system. Then, the dynamic phase transition temperatures are obtained by investigating the thermal behavior of dynamic sublattice magnetizations. Moreover, from this investigation, the nature of the phase transitions(first- or second-order) is characterized. Finally, the dynamic phase diagrams are plotted in five different planes. It is found that the dynamic phase diagrams contain the paramagnetic(P),antiferromagnetic(AF5/2, AF3/2, AF1/2) phases and five different mixed phases. The phase diagrams also display many dynamic critical points, such as tricritical point, triple point, quadruple point, double critical end point and separating point.     

Phase Diagram of Transverse Spin-2 Ising Model with Longitudinal Crystal Field

The transverse spin-2 Ising ferromagnetic model with a longitudinal crystal field is studied within the mean-field theory. The phase diagrams and magnetization curves are obtained by diagonalizing the Hamiltonian Hi of the Ising system numerically, and the first order-order phase transitions, the first order-disorder phase transitions, and the second-order phase transitions are discussed in details. Reentrant phenomena occur when the value of the transverse field is not zero and the reentrant diagram is given.     

Generation of Atomic Cluster State via Adiabatic Evolution of Dark Eigenstates

We propose a scheme to generate atomic cluster states of arbitrary configuration in the cavity quantum electrodynamics （QED） system. The process is achieved via adiabatic evolution of dark states, which only requires adiabatically increasing or decreasing Rabi frequencies of laser. Thus it allows the robust implementation of entanglement against certain types of errors. Our scheme is relatively decoherence-free in the sense that excited atomic states are never populated and excited cavity photon states can be made negligible in certain conditions.     

Monte-Carlo Simulation of Multiple-Molecular-Motor Transport

Multimotor transport is studied by Monte-Carlo simulation with consideration of motor detachment from the filament. Our work shows, in the case of low load, the velocity of multi-motor system can decrease or increase with increasing motor numbers depending on the single motor force-velocity curve. The stall force and run-length reduced greatly compared to other models. Especially in the case of low ATP concentrations, the stall force of multi motor transport even smaller than the single motor＇s stall force.     

Effects of acetone-soaking treatment on the performance of polymer solar cells based on P3HT/PCBM bulk heterojunction

The improvement of the acetone-soaking treatment to the performance of polymer solar cells based on the P3HT/PCBM bulk heterojunction is reported. Undergoing acetone-soaking, the PCBM does not distribute uniformly in the vertical direction, a PCBM enrichment layer forms on the top of the active layer, which is beneficial to the collec- tion of the carriers and blocking the inverting diffusion carriers. X-ray photoelectron spectroscopy （XPS） analysis reveals that the PCBM weight ratio on the top of the active layer increases by 20% after the acetone-soaking treatment. Due to the nonuniform distribution of PCBM, the short-circuit current density, the open-circuit voltage, and the fill factor are enhanced significantly. Finally, the power conversion efficiency of the acetone-soaking device increases by 31% compared with the control device.     

Efficient Atomic One-Qubit Phase Gate Realized by a Cavity QED and Identical Atoms System

We present a scheme to implement a one-qubit phase gate with a two-level atom crossing an optical cavity in which some identical atoms are trapped. One can conveniently acquire an arbitrary phase shift of the gate by properly choosing the number of atoms trapped in the cavity and the velocity of the atom crossing the cavity. The present scheme provides a very simple and efficient way for implementing one-qubit phase gate.     

Effects of Phase Damping on Controlled Teleportation of a Qubit by a GHZ State

We investigate controlled teleportation ofa qubit via a GHZ state with the influence of phase damping in the Bloch sphere representation. We use the average trace distance to describe how close the output state is to the input state to be teleported. Our results show that the average trace distance is a function of decoherence rates and angles of the analyzer performed by the controller in the single-particle projective measurement. Moreover, for a fixed value of the decoherence rate, one can adjust the analyzer angle to achieve the optimal average trace distance.     

Electro–magnetic control of shear flow over a cylinder for drag reduction and lift enhancement

In this paper, the electro-magnetic control of a cylinder wake in shear flow is investigated numerically. The effects of the shear rate and Lorentz force on the cylinder wake, the distribution of hydrodynamic force, and the drag/lift phase diagram are discussed in detail. It is revealed that Lorentz force can be classified into the field Lorentz force and the wall Lorentz force and they affect the drag and lift forces independently. The drag/lift phase diagram with a shape of ＂8＂ consists of two closed curves, which correspond to the halves of the shedding cycle dominated by the upper and lower vortices respectively. The free stream shear （K 〉 0） induces the diagram to move downward and leftward, so that the average lift force directs toward the downside. With the upper Lorentz force, the diagram moves downwards and to the right by the field Lorentz force, thus resulting in the drag increase and the lift reduction, whereas it moves upward and to the left by the wall Lorentz force, leading to the drag reduction and the lift increase. Finally the diagram is dominated by the wall Lorentz force, thus moving upward and leftward. Therefore the upper Lorentz force, which enhances the lift force, can be used to overcome the lift loss due to the free stream shear, which is also obtained in the experiment.     

High pressure X-ray diffraction study of CaMnO3 perovskite

Using a diamond anvil cell device and synchrotron radiation,the in-situ high-pressure structure of CaMnO3 has been investigated.In the pressure up to 36.5 GPa,no pressure-induced phase transition is observed.The pressure dependence on the lattice parameters of CaMnO3 is reported,and the relationship of the axial compression coefficients is βa 〉 βc 〉 βb.The isothermal bulk modulus K298=224（25） GPa is also obtained by fitting the pressure-volume data using the Murnaghan equation of state.     

Matching by solenoids in space charge dominated LEBTs

The betatron matching of a rotationally asymmetric beam in space charge dominated low-energy beam transports （LEBTs） where solenoids are used for the transverse matching has been studied. For better understanding, the coupling elements of a beam matrix are interpreted in special forms that are products of a term defined by the Larmor rotation angle and another by the difference between the beam matrix elements in the two transverse planes. The coupling form originally derived from the rotationally symmetric field in solenoids still holds when taking into account the rotationally asymmetric space charge forces that are due to the unequal emittance in the two transverse planes. It is shown in this paper that when an LEBT mainly comprising solenoids transports a beam having unequal emittance in the two transverse planes and the linear space charge force is taken into account, the initial Twiss parameters can be modified to obtain the minimum and equal emittance at the LEBT exit. The TRACE3D calculations also prove the principle. However, when quadrupoles that are also rotationally asymmetric are involved in between solenoids, the coupling between the two transverse planes becomes more complicated and the emittance increase is usually unavoidable. A matching example using the CSNS （China Spallation Neutron Source） LEBT conditions is also presented.     

Controllable optical mirror of cesium atoms with four-wave mixing

The controllable optical mirror is experimentally accomplished in a Λ-type three-level atomic system coupled with standing wave. It is shown that the reflection of probe light results from electromagnetically-induced-transparency-based four-wave mixing, therefore the reflection efficiency is highly dependent on the angle for phase matching condition between the probe and coupling fields. The measured reflection spectra show good agreement with dispersion compensation theory.     

New Type of Conserved Quantities of Lie Symmetry for Nonholonomic Mechanical Systems in Phase Space

The new types of conserved quantities, which are directly induced by Lie symmetry of nonholonomie mechanical systems in phase space, are studied. Firstly, the criterion of the weak Lie symmetry and the strong Lie symmetry are given. Secondly, the conditions of existence of the new type of conserved quantities induced by the weak Lie symmetry and the strong Lie symmetry directly are obtained, and their form is presented. Finaily, an Appell-Hamel example is discussed to further illustrate the applications of the results.     

Effect of Tensor Force on the Halo Structure of ^29Ne and ^31Ne

The structure of Ne isotopes has been investigated by using deformed Skyrme-Hartree-Fock （SHF） method and BCS approximation. Especially the effect of tensor force on the halo structure of 29Ne and 31Ne is discussed. To this end, the tensor contributions are considered to the energy density function and the single particle potential in SHF theory. For comparison, four Skyrme interactions are used： SLy5 and SGII without tensor force, and SLy5＋T and SGII＋ T with tensor force. The results indicate that the inclusion of tensor force shows a more pronounced halo structure for 31Ne.     

Calculation of Radii and Density of ^7-19B Isotopes Using Effective Skyrme Force

Abstract In this study, the proton and neutron densities, charge densities, rms nuclear charge radii, rms nuclear mass radii, rms nuclear proton, neutron radii, and neutron skin thickness are calculated by using Harfree-Fock method with an effective nucleon-nucleon Skyrme interactions with SⅠ, SⅡ, SⅣ, T3, SKM, and SKM^＊ parameters. These nuclear properties for the neutron-rich isotopes of B （Boron） are presented. The calculated results are compared with the experimental and theoretical results of other researchers.     

Biham–Middleton–Levine model in consideration of cooperative willingness

In this paper, the Biham-Middleton-Levine （BML） model with consideration of cooperative willingness has been proposed to study the traffic flow in urban networks. An evolutionary game with a cooperative willingness profile is intro-duced to deal with conflicts between disturbing neighbors. Simulation results suggest that imitating cooperative willingness can ease the effect of premature seizure on traffic flow due to the introduction of evolutionary games. Phase diagrams with a strategy profile and cooperative willingness profile have been investigated in detail. Our findings also prove that by imitating the more successful, cooperative willingness instead of simply the more successful strategies, the evolution of cooperation is significantly promoted, hence improving the order of cooperation and relieving the pressure of traffic networks.     

Dielectric and infrared properties of SrTiO3 single crystal doped by 3d （V,Mn, Fe,Ni） and 4f （Nd,Sm, Er） ions

In this study, the effects of doping by 3d （V, Mn, Fe, Ni） and 4f （Nd, Sm, Er） ions on dielectric and infrared properties of SrTiO3 （STO） single crystals are investigated. It is well known that doping of the SrTiO3 can change the dielectric properties of the STO from an insulator to an n-type semiconductor, and even to a metallic conductor. Dielectric and infrared （IR） properties of the undoped STO and doped STO single crystals are analyzed using dielectric spectroscopy （80 kHz-5 MHz）, transmission （200 cm^-1-4000 cm^-1）, and reflection spectroscopy （50 cm^-1-2000 cm^-1）. It is found that doping by the 3d ions reduces the value of dielectric permittivity, but the trend of temperature dependence of the dielectric permittivity remains almost unchanged. On the other hand, dielectric spectroscopy measurements for samples doped by 4f ions show the anomalous behaviors of the dielectric permittivity at temperatures around the temperature of the structural phase transition. There are two fractures of temperature dependences of inverse dielectric permittivity εr^-1 （T）. Transmittance spectroscopy measurements show that there are differences in the shape of the spectrum in the mid-IR region between the undoped STO and the one doped by 4f ions. The differences in the reflectance spectrum between the STO：Nd and STO are analyzed in detail.