紫外臭氧处理超薄银修饰ITO电极的高效柔性有机太阳能电池

以紫外臭氧处理超薄Ag复合MoO₃或PEDOT：PSS修饰ITO电极的高效柔性有机太阳能电池。通过优化紫外臭氧处理Ag薄膜的时间,提高了以P3HT：PCBM为有源层的器件的功率转换效率,从1.68%（未经过紫外臭氧处理）提高到2.57%（紫外臭氧处理Ag 1 min）。提高的原因推测是紫外臭氧处理形成了AgO_x薄膜,提高了电荷提取并使器件具有高光学透明度、低串联电阻和优异的表面功函数等一些性能。并且,紫外臭氧处理Ag薄膜与MoO₃或者PEDOT：PSS复合修饰ITO的器件效率分别得到提高,Ag薄膜与MoO₃复合修饰ITO的器件效率从2.02%（PET/ITO/MoO₃）提高到2.97%（PET/ITO/AgO_x/MoO₃）,Ag薄膜与PEDOT：PSS复合修饰ITO的器件效率从2.01%（PET/ITO/PEDOT：PSS）提高到2.93%（PET/ITO/AgO_x/PEDOT：PSS）。此外,以PBDTTT-EFT：PC₇₁BM为有源层的柔性聚合物太阳能电池效率可达6.21%。基于ITO的柔性光电器件效率的提高主要归于ITO被Ag/PEDOT：PSS或Ag/MoO₃修饰后功函数的提高。     

银纳米颗粒对聚合物太阳能电池性能的提高

采用水溶性银纳米颗粒附着在反型太阳能电池的电子传输层上,用以提高有机太阳能电池的短路电流。所制备的器件结构为ITO/ZnO/Ag NPs/P3HT(Poly 3-hexylthiophene):PC_[60]BM/MoO₃/Ag。其金属银纳米颗粒的表面等离激元在410 nm处出现了共振吸收峰,半峰全宽约为60 nm。器件的光电流在可见光范围内均有所增加,短路电流相对于标准器件提高了20.2%,光电转化效率相对提高了17.2%。     

利用不同阴极缓冲层来改善Pentacene/C60太阳能电池的性能

制备了结构为ITO/Pentacene/C₆₀/Al的双层光伏电池器件,在C₆₀/Al界面插入了常用的缓冲层材料bathocuproine(BCP)作为阴极缓冲层,通过优化BCP层的厚度来提高电池的性能并研究了阴极缓冲层的作用机理.实验发现,BCP厚度为10 nm时器件的效率最高,为0.46%.在此基础上,利用bathophenanthroline(Bphen)和3,4,9,10-Perylenetetracarb-oxylicdianhydride(PTCDA 关键词： 有机太阳能电池 Pentacene 60')" href="#">C₆₀ 缓冲层     

电纺ZnO纳米纤维电子传输层提高倒置PTB7∶PC70BM电池效率

研究利用静电纺丝制备的不同直径ZnO纳米纤维作为倒置结构有机太阳能电池的电子传输层对器件转化效率的影响。首先通过静电纺丝技术成功制备了半径在43～110 nm之间的ZnO纳米纤维,然后将ZnO纳米纤维作为电子传输层加入到倒置结构有机太阳能电池（ITO/ZnO∶ZnO nanofiber/PTB7∶PC₇₀BM/MoO₃/Al）。与平面结构的ZnO电子传输层相比,ZnO纳米纤维具有比表面积大等优点,增加了电子传输和抽取能力,提高了器件的光电转化效率。实验发现ZnO纳米纤维的直径越小,电池效率越大。当ZnO纳米纤维直径为(46±5)nm,接收时间为30 s时,作为电子传输层的电池效率提高了8%。     

基于金纳米棒@二氧化硅表面等离子体共振增强的有机太阳能电池

把包裹SiO₂的金纳米棒（Au NRs@SiO₂）掺杂到有机太阳能电池的活性层中,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率。研究了不同掺杂浓度和不同包裹厚度对电池性能的影响。结果表明,掺杂浓度为1.5%时,器件性能最佳,能量转换效率达到4.02%;SiO₂壳层厚度为3 nm时,转换效率达到4.38%,较标准电池提升了29.2%。     

限制电流对Ta/BaTiO3/Al2O3/ITO忆阻器的开关比和稳定性调控

利用磁控溅射技术沉积了Ta/Ba Ti O₃/Al₂O₃/ITO多层薄膜,观察到该结构中的电阻开关现象受到限制电流的调控.在限制电流大小为10^–2 A时,器件中的电阻开关现象达到最优. Ta/Ba Ti O₃/Al₂O₃/ITO多层薄膜的电阻开关具有良好的可重复性和稳定性.本文使用空间限制电流的传导模型对Ta/Ba Ti O₃/Al₂O₃/ITO器件中受限制电流调控的电阻开关传导机理进行了解释.     

新型硒化锑薄膜太阳电池背接触优化

硒化锑(Sb₂Se₃)具有低毒、原材料丰富和光电性能优异等优点,被认为是最具有发展潜力的薄膜太阳电池光吸收层材料之一.但目前Sb₂Se₃薄膜太阳电池光电转换效率与碲化镉、铜铟镓硒和钙钛矿等太阳电池相比仍存在较大差距.限制Sb₂Se₃薄膜太阳电池光电转换效率进一步提升的关键因素之一是,太阳电池结构中Mo背电极和Sb₂Se₃薄膜构建的背接触界面处容易形成较高的势垒,降低载流子的抽取效率.本工作则对Mo背电极进行热处理生成缓冲层MoO₂薄膜,发现缓冲层MoO₂的引入,可有效地促进Sb₂Se₃薄膜的择优取向生长,同时实现太阳电池Mo/MoO2/Sb₂Se₃背接触势垒降低,相应的填充因子、开路电压和短路电流密度均获得显著提高,构建的太阳电池光电转换效率从5.04%提升至7.05%.     

功能层厚度对叠层有机电致发光器件出光性能影响的数值研究

功能层厚度是影响有机电致发光器件出光效率的主要因素之一,故获得不同功能层厚度对器件出光特性的影响规律是制备高性能器件的重要基础. 本文基于薄膜光学原理、电偶极子辐射理论及Fabry-Pérot微腔原理,建立了结构为glass/ITO/N,N0-bis（naphthalen-1-yl）-N,N0-bis（phenyl）-benzidine（NPB）/tris（8-hydroxyquinoline）aluminum（Alq₃）/molybdenum trioxide（MoO₃）/NPB/Alq₃/Al的叠层有机电致发光器件的光学模型,系统地研究了各个功能层厚度对叠层有机电致发光器件出光强度的影响,得到了功能层厚度对器件出光强度影响的规律. 该模型的建立与所获得的结果可对深入了解叠层有机电致发光器件的工作机理以及制备高性能的器件提供一定的帮助. 关键词： 叠层有机发光器件 出光特性 厚度 数值研究     

EDTA/SnO2双层复合电子传输层在钙钛矿电池中的应用

有机-无机杂化钙钛矿太阳能电池器件因其高效率受到广泛关注,而界面问题是制备高效钙钛矿太阳能电池的关键问题之一.本文研究了一种高效的乙二胺四乙酸(ethylene diamine tetraacetic acid, EDTA)/SnO₂双层复合结构,将超薄的EDTA层与ITO(锡-铟氧化物)电极接触, SnO₂层与钙钛矿界面接触,作为电子传输层(ETL)用于制备钙钛矿太阳能电池.有趣的是,复合ETL的顶部SnO₂侧的表面形态可以通过调整下面的EDTA层来进行微调.通过调整EDTA膜厚,可以调控钙钛矿层结晶过程中的成核过程,调节了电子传输层与钙钛矿层之间的载流子提取过程.本文中制备的钙钛矿太阳能电池的回滞效应可以忽略,并且经过第三方认证,已经实现了20.2%的能量转换效率.     

PTCBI作为阴极修饰层对Rubrene/C70器件性能的影响

制备了结构为ITO/MoO₃(6 nm)/Rubrene (30 nm)/C₇₀ (30 nm)/PTCBI(x nm)/Al (150 nm)器件, 研究了四羧基苝的衍生物PTCBI作为阴极修饰层对Rubrene/C₇₀有机太阳能电池的作用. 实验结果显示, 在C₇₀与Al电极之间插入PTCBI 后, 电池性能得到明显改善; 分析表明, 插入PTCBI后, 活性层与阴极形成了良好的欧姆接触, 提高了器件的内建电场, 同时PTCBI避免了激子与Al电极的接触, 减少了在制备过程中高动能Al对C₇₀的破坏. 进一步考察了PTCBI厚度对电池的性能的影响, 结果显示, 厚度为6 nm的PTCBI 层器件性能最佳, 其开路电压(V_OC)、填充因子(FF)、短路电流密度(J_SC)与功率转换效率(ηP)与未插入PTCBI修饰层的器件相比分别提高了70.4%, 55.5%, 125.1%, 292.2%. 当PTCBI的厚度大于6 nm时, 激子解离后产生的自由电子会在PTCBI与阴极界面积累, 导致器件J-V曲线出现S形.     

Ag纳米颗粒对有机小分子太阳能电池性能的改善

在有机小分子太阳能电池CuPc/C60和TiOPc/C60的阳极ITO表面分别制备了一层Ag纳米颗粒,并采用MoO3作为阳极缓冲层,器件的性能均得到有效改善.Ag纳米颗粒的引入所形成的表面等离子激元共振可显著提高有机光活性层的吸收效率和光生激子的分解效率;而MoO3有效抑制了光生激子在有机/金属界面处发生的猝灭,提高了...     

基于MoO3/Ag/MoO3透明阳极的顶发射OLED的模拟计算与制备

运用传输矩阵法和正交分析法模拟计算出MoO₃/Ag/MoO₃透明电极的最佳厚度,采用镀膜实验验证模拟计算的准确性,制备了一系列不同MoO₃膜厚度和Ag膜厚度的透明电极。然后,制备了一系列顶发射有机电致发光器件:铝/氟化锂(LiF)/三(8-羟基喹啉)铝(Alq₃)/N,N'-二苯基-N,N'-(1-萘基)-1,1'-联苯-4,4'-二胺/三氧化钼(MoO₃)/银(Ag)/三氧化钼(MoO₃),来进一步验证模拟计算运用在器件制备中的准确性。MoO₃(10 nm)/Ag(10 nm)/MoO₃(25 nm)在532 nm处的透射率达到最大值88.256%,以该透明电极制备的器件与参考器件相比,性能有了明显提高,最大亮度和最大效率分别为20 076 cd/m²和4.03 cd/A,提高了18.5%和56%。器件性能的提高归因于顶发射OLED器件透射率的提高和MoO₃对空穴注入能力的提升。     

基于Al_2O_3/MoO_3复合阳极缓冲层的倒置聚合物太阳能电池的研究

采用旋涂Al_2O_3前驱体溶液和低温退火的方法在活性层上形成Al_2O_3薄膜,并与MoO_3结合形成Al_2O_3/MoO_3复合阳极缓冲层,制备了以聚3-己基噻吩:[6.6]-苯基-C_(61)-丁酸甲酯(P3HT:PC_(61)BM)为活性层的倒置聚合物太阳能电池,并通过改变Al_2O_3前驱体溶液的浓度来分析复合阳极缓冲层对器件性能的影响.结果发现,Al_2O_3/MoO_3复合阳极缓冲层能有效调控倒置聚合物太阳能电池的光电性能及其稳定性.当Al_2O_3前驱体溶液的浓度为0.15%时,器件光伏性能达到最优值,与MoO_3单缓冲层的器件相比,光电转换效率(PCE)由3.85%提高到4.64%;经过80天老化测试后,具有复合阳极缓冲层的器件PCE保留为初始值的76%,而单缓冲层的器件PCE已经下降到50%以下.器件性能得到改善的原因是Al_2O_3/MoO_3复合阳极缓冲层增强了倒置太阳能电池器件阳极对空穴的收集能力,同时钝化了器件活性层,从而提升了太阳能电池器件的光伏性能及其稳定性.     

Nano Ag-enhanced photoelectric conversion efficiency in all-inorganic,hole-transporting-layer-free CsPbIBr2 perovskite solar cells

All-inorganic, hole-transporting-layer-free CsPbIBr₂ perovskite solar cells have great potential for development, but their device performance needs to be further improved. Recently, metal nanostructures have been successfully applied in the field of solar cells to improve their performance. Nano Ag-enhanced power conversion efficiency (PCE) in one CsPbIBr₂ perovskite solar cell utilizing localized surface plasmons of Ag nanoparticles (NPs) on the surface has been researched experimentally and by simulation in this paper. The localized surface plasmon resonance of Ag NPs has a near-field enhancement effect, which is expected to improve the light absorption of CsPbIBr₂ perovskite photovoltaic devices. In addition, Ag NPs have a forward-scattering effect on the incident light, which can also improve the performance of CsPbIBr₂-based perovskite photovoltaic devices. By directly assembling Ag NPs (with a size of about 150 nm) on the surface of fluorine-doped tin oxide it is found when the particle surface coverage is 10%, the CsPbIBr₂ perovskite photovoltaic device achieves a best PCE of 2.7%, which is 9.76% higher than that of the control group. Without changing any existing structure in the ready-made solar cell, this facile and efficient method has huge applications. To the best of our knowledge, this paper is the first report on nano Ag-enhanced photoelectric conversion efficiency in this kind of CsPbIBr₂ perovskite solar cell.     

Enhanced performance in organic photovoltaic devices with KMnO4 solution treated indium tin oxide anode modification

The properties of poly(3-hexylthiophene):(6,6)-phenyl C₆₁ butyric acid methyl ester (P3HT:PCBM) organic photovoltaic devices (OPVs) with indium tin oxide (ITO) anode treated by KMnO₄ solution are investigated. The optimized KMnO₄ solution has a concentration of 50 mg/L, and ITO is treated for 15 min. The modification of ITO anode results in an enhancement of the power conversion efficiency (PCE) of the device, which is responsible for the increase of the photocurrent. The performance enhancement is attributed to the work function modification of the ITO substrate through the strong oxygenation of KMnO₄, and then the charge collection efficiency is improved.     

Surface modification of indium tin oxide anode with self-assembled monolayer modified Ag film for improved OLED device characteristics

Modification of electrodes has attracted much attention in the study of organic semiconductor devices. A self-assembled monolayer (SAM) of 4-fluorothiophenol is employed to modify the Ag film on the surface of indium tin oxide (ITO) to improve the hole injection and the surface morphology. The modified anode was characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and UV–vis transmittance spectra. To investigate the effect of the modification on the device characteristics, typical double layer devices with the structure of anode/-naphthylphenylbiphenyl diamine (NPB, 60 nm)/tris-(8-hydroxyquinoline) aluminum (Alq₃, 60 nm)/LiF(0.7 nm)/Al(100 nm) were fabricated using the modified anode and the bare ITO. The effect of Ag layer thickness on the device performance is also investigated. The results revealed that SAM modified ultra-thin Ag film is an effective buffer layer for organic light emitting diode. The device using the ITO/Ag (5 nm)/SAM as anode show improved device characteristics than that of using bare ITO as anode. The enhancements in luminance and efficiency are attributed to enhanced hole injection and smooth surface between anode and the organic material. The Ag thickness of 5 nm is chosen as an acceptable compromise between substrate transparency and the device performance.     

Highly transparent Ag doped In2O3 electrodes with high work function for organic solar cells

We report highly transparent Ag-doped In₂O₃ (IAO) films with high work function for use as transparent anodes in organic solar cells (OSCs). The electrical, optical, structural, and morphological properties of IAO films and their work function were investigated as a function of the rapid thermal annealing (RTA) temperature. At an RTA temperature of 600 °C, the IAO film showed a sheet resistance of 23.12 Ohm/square, an optical transmittance of 79.28%, and a work function of 5.21 eV, similar to conventional Sn-doped In₂O₃ (ITO) films. The low resistivity of the IAO film was closely related to oxygen vacancies caused by Ag suboxide formation in the In₂O₃ matrix. A bulk-heterojunction OSC with the optimized IAO anode showed performance comparable to that of an OSC with a reference ITO anode, indicating that the IAO films is a promising anode material for use in OSCs.     

新型无铟透明导电-电致变色双功能MoO_3/Ag/MoO_3薄膜的制备及性能研究

研制了集电致变色和透明导电功能为一体的MoO_3/Ag/MoO_3(MAM)双功能薄膜。MAM薄膜采用电子束热蒸发技术在室温下制备。作为透明电极,MAM薄膜显示出良好的光电性能,可见光平均透过率为59.4%,方块电阻为12.2Ω/□。作为电致变色材料,MAM薄膜具有较快的响应时间(着色时间4.3 s,褪色时间11.1s),25%的光学对比度(528 nm),良好的稳定性(100次循环),以及较高的着色效率(40.5 cm~2·C~(-1)),在已报道的MoO_3着色效率中处于较高的水平。