Fiber fuse behavior in k W-level continuous-wave double-clad field laser

In this study, original experimental data for fiber fuse in k W-level continuous-wave(CW) high power double-clad fiber(DCF) laser are reported. The propagating velocity of the fuse is 9.68 m/s in a 3.1-k W Yb-doped DCF laser. Three other cases in Yb-doped DCF are also observed. We think that the ignition of fiber fuse is caused by thermal mechanism,and the formation of bullet-shaped tracks is attributed to the optical discharge and temperature gradient. The inducements of initial fuse and formation of bullet-shaped voids are analyzed. This investigation of fiber fuse helps better understand the fiber fuse behavior, in order to avoid the catastrophic destruction caused by fiber fuse in high power fiber laser.     

双包层光纤光栅选频双包层光纤激光器

双包层光纤激光器中多采用法布里珀罗(F-P)线形腔结构,谐振腔为一只二向色镜和光纤端面菲涅耳反射镜(反射率约为4％)构成,这属于一种有缺陷的腔结构,其稳定性不好,产生激光的波长很难得到有效控制,后腔镜不能精确选择激光器的输出波长,激光器的输出谱线较宽。在某些对激光波长有明确要求的应用中,该结构会受到限制。采用布拉格光纤光栅作腔镜,利用其窄带滤波特性,可以得到窄线宽的激光输出,目前报道的作为腔镜的布拉格光纤光栅为在单包层光敏光纤上制作而成,然后分别将不同反射率的光纤光栅与双包层增益光纤熔接,这给腔镜与双包层光纤之间带来很大的耦合损耗,影响了激光器的功率输出。该文报道了用相位掩模法在双包层光纤芯上写入了布拉格光纤光栅,并把此光纤光栅做为后腔镜．对长度为10m、20m的D形掺Yb^3 双包层光纤激光器进行实验研究,在1058nm附近得到稳定的窄线宽激光输出,3dB带宽为0．329nm。激光器最大输出功率为570mW。最后对实验结果进行了理论分析。     

利用光纤光栅的高功率掺镱光纤激光器

报道了利用一对光纤光栅作为双包层Yb^3 掺杂光纤激光器的谐振腔，激光二极管光纤模块(LD)进行了抽运，并采用锥形光纤实现了全光纤化结构，获得了高功率双包层光纤激光器。光纤光栅通常是用融接技术实现与双包层光纤的一体化连接的，采用的双包层光纤为内包层为梅花瓣形结构的掺Yb^3 离子的石英光纤，采用的抽运源为中心波长为970nm的半导体激光光纤输出模块，在抽运源电流达到2．4A时，获得了10．8W的光纤激光器单横模输出，输出波长1100．5nm，峰值半峰全宽(FWHM)为0．54nm，激光器斜效率为59％。     

包层泵浦掺镱光纤激光器的理论和实验研究

从包层泵浦光纤激光器的速率方程理论出发,推导出了稳态下包层泵浦光纤激光器的输出功率,斜率效率和阈值功率的解析表达式,进行了数值模拟,对模拟结果进行了简单分析。并进行了实验研究,实验采用中心波长为975nm的激光二级管单端泵浦内包层形状为D型的包层光纤,利用二相色镜和光纤端面反馈构成谐振腔,采用了两套不同的准直耦合系统,得到的最高输出功率为24W,总的光-光转换效率为53.5%。     

侧面抽运的掺Yb双包层光纤激光器

利用光纤角度磨抛侧面耦合新技术研究了侧面抽运的掺Yb双包层光纤激光器。实验上采取新的加工工艺获得了端面具有小锐角磨抛斜角的多模光纤,专门设计的高精密机械调整结构有效地将多模光纤的斜面和双包层光纤的侧面精确对准,通过不同的折射率匹配材料进行的研究,发现折射率匹配材料对于注入功率和抽运效率都有较大影响。实验中通过光纤角度侧面耦合器能够注入1．12W抽运光进入双包层光纤,侧面耦合效率最高可达80％。将该侧面耦合技术用于侧面抽运的掺Yb双包层光纤激光器,在单个尾纤输出的半导体激光器侧面抽运下得到光纤激光器的最大连续激光输出功率282mW,斜率效率为55．5％。实验结果表明,光纤角度磨抛耦合技术是掺Yb双包层光纤激光器的一种简单有效的侧面抽运方式。     

Characterization of an Intra-Cavity Pumped P2O5-Doped Silica Raman Fiber Laser

We examine the characteristics of a P₂O₅-doped Raman fiber laser pumped by a double-clad ytterbium-doped fiber laser in an intra-cavity configuration. The double-clad fiber laser consists of two high reflection fiber Bragg gratings at 1092 nm, with an active length of 17 m, where the output grating is located at the end of the 400m P₂O₅-doped fiber. The Raman cavity is formed by a 1278-nm-high reflection fiber Bragg grating spliced to the double-clad fiber, and a 50% output coupler. The maximum conversion efficiency at 1278 nm with respect to the input pump power at 915 nm was 26.9%.     

高功率双包层光纤激光器抽运技术的方案分析

介绍了高功率光纤放大器双包层光纤的结构特点和双包层抽运的基本原理,在此基础上对高功率双包层光纤激光器的抽运关键技术作了分析,详细讨论了端面抽运技术、熔锥侧面抽运技术、内嵌反射镜抽运技术、角度抛光侧面抽运技术和V形槽侧面抽运技术等多种侧面抽运技术的结构及系统性能参数,并对各种侧面抽运技术的优缺点作了比较分析.研究结果表明,侧面抽运比端面抽运更有利于获得高功率激光输出,而在侧面抽运技术中则以V形槽侧面抽运技术为佳.     

掺Yb3+双包层光纤中的绿光荧光分析

普通单模光纤与掺Yb³⁺双包层光纤熔接后,当用波长为976nm激光耦合时,实验观察到掺Yb³⁺双包层光纤中呈现绿色的荧光并用光谱仪进行了测试分析表明:绿色荧光的产生为Yb³⁺离子间相互作用引起合作能量转移(CET)过程,这种能量转移过程将降低光纤激光器和光纤放大器的量子效率。     

高功率双包层光纤激光器

介绍了高功率双包层光纤激光器的结构和工作原理，综述这种新型光纤激光器的主要特点及其在国内外的最新进展状况，展望了双包层光纤激光器的应用前景。     

双包层掺染料聚合物光纤放大器的增益性能分析

双包层聚合物光纤放大器可以减小染料的热漂白,使用速率方程的方法,给出了一个能够全面描述双包层掺染料聚合物光纤放大器增益性能的模型,模型既考虑了染料三重态能级对速率方程的影响,又考虑了双包层结构对泵浦光的影响,可以在稳态的情况下计算放大器的各种增益性能指标.     

大功率多波长可转换双包层光纤激光器

在多模掺镱双包层光纤上,利用相位掩模法直接写制Bragg光栅作为激光器后腔镜,得到多波长激光输出.在室温下,通过调节偏振控制器可以得到稳定的单波长及多波长的激光输出,输出波长范围在1 056～1 061 nm,线宽均小于0.02 nm.在25 W的976 nm激光泵浦下,激光器得到功率为6 W的多波长输出.     

L波段可调谐线形腔Er/Yb共掺双包层光纤激光器

报道了一种结构简单、工作在L波段、可调谐的线形腔Er/Yb共掺双包层光纤激光器.利用由两段高双折射光纤和两个偏振控制器构成的环镜滤波器对激光器进行调谐，使调谐范围达到34 nm，功率起伏小于±0.2 dB.用976 nm多模LD泵浦Er/Yb共掺双包层光纤产生的ASE作为二次泵源，对未泵浦的一段光纤进行泵浦，使腔内Er/Yb共掺光纤的增益谱移到L波段;多个泵浦源同时对Er/Yb共掺双包层光纤进行侧向泵浦，使激光器输出功率超过了200 mW.     

自调Q、自锁模铒/镱共掺光纤激光器

研究了结构新颖的环形腔铒/镱（Er/Yb）共掺双包层光纤激光器.为了获得高功率激光输出，使用6个激光二极管（LD）同时抽运Er/Yb共掺光纤，采用光纤光栅（FBG）Sagnac环作为波长选择器，得到了中心波长为1548.11 nm、谱线宽度为0.06 nm的窄线宽激光输出；并利用增益光纤作为可饱和吸收体，实现了自调Q、自锁模脉冲输出.当抽运功率为719 mW时，激光器输出自调Q脉冲，脉冲周期为20μs，脉冲宽度为2.8μs，脉冲的平均功率为38.4mW，峰值功率为274.3mW；当抽运功率为3.6 W时，激光器输出自锁模脉冲，脉冲宽度为4ns，平均功率为319 mW，脉冲峰值功率大于10 W，重复频率为7.937 MHz.     

大模场双包层光纤光栅的光谱特性

在分析大模场双包层光纤的模式特性和测试光路中光功率分配的基础上,根据耦合波理论和传输矩阵法,对不同情况下大模场双包层光纤光栅的透射谱和反射谱进行数值分析,结果表明光谱形状取决于模式间的功率分配,通过基模的透射谱可以测量双包层光纤光栅的真实反射率。采用相位掩模法制作了基模反射率不低于99.7%的20/400μm大模场双包层光纤光栅,测试了不同情况下的反射谱和透射谱,实验结果和理论分析的结论一致。     

基于双峰谐振效应的镀金属长周期光纤光栅液体浓度传感器

利用长周期光纤光栅(LPFG)中的双峰谐振效应,结合表面等离子体共振(SPR)传感器的高灵敏度,提出了一种新型镀金属光纤光栅液体浓度传感器.采用双包层结构模型和耦合模理论,分析r镀金属长周期光纤光栅双峰效应的谐振特性,环境折射率的传感特性以及金属膜厚对双峰LPFG灵敏度的影响.实验上制作了具有双峰效应的镀银膜长周期光纤...     

Output Characteristics of High-Power Continuous Wave Raman Fiber Laser at 1239 nm Using Phosphosilicate Fiber

A high-power singlemode Raman fiber laser (RFL) with maximum output power of 4.11 W and maximum power conversion efficiency of 47.40% at 1239 nm is realized using continuous wave 8.4 W Yb-doped double-clad fiber laser as a pump, 700 m phosphosilicate fiber, and a Raman cavity formed by a pair of fiber Bragg grating mirrors at 1239 nm. The output characteristics of the RFL at 1239 nm for different fiber lengths and output mirror reflectance are reported. Theoretical simulation is done to numerically optimize for fiber length and output coupler reflectivity to obtain maximum first Stokes power.     

Diode-pumped 1018-nm ytterbium-doped double-clad fiber laser

We report a 1 018-nm ytterbium-doped double-clad fiber laser pumped by 970-nm diode. A pair of fiber Bragg gratings with reflectivities of 99.9% and 9% at a center wavelength of 1 018.9 nm are employed as cavity mirrors. The ytterbium-doped double-clad fiber is a 2.6-m-long Liekki fiber. Laser output power of 7.5 W at 1 018 nm is obtained under the pump power of 59.2 W. The overall slope efficiency of the fiber laser is about 16%. This low slope efficiency is mainly due to the incomplete absorption of the pump power.     

高功率掺镱光纤放大器中频率上转换发光现象的研究

建立了半导体抽运的高功率掺镱双包层光纤放大器实验系统,对放大器中的频率上转换发光现象进行了理论和实验研究,分析认为实验中由光纤侧面和两端观测到的绿色荧光是处于激发态的Yb2 相互作用,同时湮没而产生的合作荧光.分别对光纤放大器信号端和抽运端输出的荧光谱进行了测量.将实验谱线与理论计算得到的合作发光谱进行了对比分析.研究了信号光和放大自发辐射对上转换发光的影响,根据速率方程推导出荧光强度与抽运功率之问的理论关系表达式,同时通过实验获得了荧光强度与抽运功率的关系曲线.     

2080 nm long-wavelength,high-power dissipative soliton resonance in a dumbbell-shaped thulium-doped fiber laser

We demonstrate a 2080 nm long-wavelength mode-locked thulium(Tm)-doped fiber laser operating in the dissipative soliton resonance(DSR) regime. The compact all-fiber dumbbell-shaped laser is simply constructed by a 50/50 fiber loop mirror(FLM), a 10/90 FLM, and a piece of large-gain Tm-doped double-clad fiber pumped by a 793 nm laser diode. The 10/90 FLM is not only used as an output mirror, but also acts as a periodical saturable absorber for initiating DSR mode locking. The stable DSR pulses are generated at the center wavelength as long as 2080.4 nm, and the pulse duration can be tunable from 780 to 3240 ps as the pump power is increased. The maximum average output power is 1.27 W, corresponding to a pulse energy of 290 nJ and a nearly constant peak power of 93 W. This is, to the best of our knowledge, the longest wavelength for DSR operation in a mode-locked fiber laser.     

Output Characteristics of High-Power Continuous Wave Raman Fiber Laser at 1484 nm Using Phosphosilicate Fiber

A continuous wave (CW) high-power Raman fiber laser (RFL) with maximum output power of 2.24 W and slope efficiency of 32.8% at 1484 nm is obtained using a CW 8.4 W/ 1064 nm Yb-doped double-clad fiber laser as a pump, 700 m phosphosilicate fiber, and cascaded cavities with two pairs of fiber Bragg grating mirrors for the first and the second Stokes orders. Theoretical simulation of the RFL using a very efficient and rapidly converging collocation method is done to understand and optimize the fiber length to obtain maximum second Stokes power. RFL performance for the 300, 700 and 1150 m phosphosilicate fiber lengths was experimentally investigated by observing maximum output power, slope efficiency, threshold power, and full-width at half maximum at the second Stokes wavelength.