Comparative study of adsorption characteristics of Cs on the GaN(0001) and GaN(000) surfaces

The adsorption characteristics of Cs on GaN(0001) and GaN(000) surfaces with a coverage from 1/4 to 1 monolayer have been investigated using the density functional theory with a plane-wave ultrasoft pseudopotential method based on first-principles calculations.The results show that the most stable position of the Cs adatom on the GaN(0001) surface is at the N-bridge site for 1/4 monolayer coverage.As the coverage of Cs atoms at the N-bridge site is increased,the adsorption energy reduces.As the Cs atoms achieve saturation,the adsorption is no longer stable when the coverage is 3/4 monolayer.The work function achieves its minimum value when the Cs adatom coverage is 2/4 monolayer,and then rises with Cs atomic coverage.The most stable position of Cs adatoms on the GaN(000) surface is at H3 site for 1/4 monolayer coverage.As the Cs atomic coverage at H3 site is increased,the adsorption energy reduces,and the adsorption is still stable when the Cs adatom coverage is 1 monolayer.The work function reduces persistently,and does not rise with the increase of Cs coverage.     

Chemisorption of Au on Si（001） surface

The chemisorption of one monolayer of Au atoms on an ideal Si(001) surface is studied by using the self-consistent tight binding linear muffin-tin orbital method. Energies of the adsorption system of a Au atom on different sites are calculated. It is found that the most stable position is A site (top site) for the adsorbed Au atoms above the Si(001) surface. It is possible for the adsorbed Au atoms to sit below the Si(001) surface at the B_1 site(bridge site), resulting in a Au－Si mixed layer. This is in agreement with the experiment results. The layer projected density of states is calculated and compared with that of the clean surface. The charge transfer is also investigated.     

Initial Processes of Sulfur Adsorption on Si（100） Surface

The adsorption of one monolayer S atoms on ideal Si（100） surface is studied by using the self-consistent tight binding linear muffon-tin orbital method. Energies of adsorption systems ors atoms on different sites are calculated. It is found that the adsorbed S atoms are more favorable on B1 site （bridge site） with a distance 0.131 nm above the Si surface. The .S, Si mixed layer might exist at S/Si（100） interface. The layer projected density of states are calculated and compared with that of the clean surface. The charge transfers are also investigated.     

Chemisorption of Fe on Au-passivated Si（001） surface

The chemisorption of one monolayer of Fe atoms on a Au-passivated Si(001) surface is studied by using the self-consistent tight-binding linear muffin-tin orbital method. The Fe adatom chemisorption on an ideal Si(001) surface is also considered for comparison. The chemisorption energy and layer projected density of states for a monolayer of Fe atoms on Au-passivated Si(001) surface are calculated and compared with that of the Fe atoms on an ideal Si(001) surface. The charge transfer is investigated. It is found that the most stable position is at the fourfold hollow site for the adsorbed Fe atoms, which might sit below the Au surface. Therefore there will be a Au－Fe mixed layer at the Fe/Au－Si(100) interface. It is found that the adsorbed Fe atoms cannot sit below the Si surface, indicating that a buffer layer of Au atoms may hinder the intermixing of Fe atoms and Si atoms at the Fe/Au－Si(001) interface effectively, which is in agreement with the experimental results.     

Ar adsorptions on Al （111） and Ir （111） surfaces： a first-principles study

We investigate the adsorptions of Ar on Al (111) and Ir (111) surfaces at the four high symmetry sites,i.e.,top,bridge,fcc-and hcp-hollow sites at the coverage of 0.25 monolayer (ML) using the density functional theory within the generalized gradient approximation of Perdew,Burke and Ernzerhof functions.The geometric structures,the binding energies,the electronic properties of argon atoms adsorbed on Al (111) and Ir (111) surfaces,the difference in electron density between on the Al (111) surface and on the Ir (111) surface and the total density of states are calculated.Our studies indicate that the most stable adsorption site of Ar on the Al (111) surface is found to be the fcc-hollow site for the (2 × 2) structure.The corresponding binding energy of an argon atom at this site is 0.538 eV/Ar atom at a coverage of 0.25 ML.For the Ar adsorption on Ir (111) surface at the same coverage,the most favourable site is the hcp-hollow site,with a corresponding binding energy of 0.493 eV.The total density of states (TDOS) is analysed for Ar adsorption on Al (111) surface and it is concluded that the adsorption behaviour is dominated by the interaction between 3s,3p orbits of Ar atom and the 3p orbit of the base Al metal and the formation of sp hybrid orbital.For Ar adsorption on Ir (111) surface,the conclusion is that the main interaction in the process of Ar adsorption on Ir (111) surface comes from the 3s and 3p orbits of argon atom and 5d orbit of Ir atom.     

A Density Functional Study of Atomic Carbon Adsorption on δ-Pu（111） Surface

Adsorption of atomic carbon on 6-Pu（111） surface is investigated systematically using density functional theory with RPBE functional. The adsorption energies, adsorption structures, Mulliken population, work functions, layer and projected density of states are calculated in wide ranges of coverage, which have never been studied before as far as we know. It is found that the hcp-hollow sites is the energetically favorable site for all the coverage range considered. The repulsive interaction is identified, and the adsorption energy decreases with the coverage, while work function increases linearly with the coverage. It is found that the C-Pu interaction is very strong due to the hybridization between the C 2p states and the Pu 5 f , Pu 6p,Pu 6d states of topmost layer Plutonium atoms.     

Methane adsorption on graphite（0001） films： A first-principles study

Using first-principles methods, we have systematically investigated the electronic density of states, work function, and adsorption energy of the methane molecule adsorbed on graphite(0001) films. The surface energy and the interlayer relaxation of the clean graphite(0001) as a function of the thickness of the film were also studied. The results show that the interlayer relaxation is small due to the weak interaction between the neighboring layers. The one-fold top site is found most favourable on substrate for methane with the adsorption energy of 133 meV. For the adsorption with different adsorption heights above the graphite film with four layers, the methane is found to prefer to appear at about 3.21 A above the graphite. We also noted that the adsorption energy does not dependent much on the thickness of the graphite films. The work function is enhanced slightly by adsorption of methane due to the slight charge transfer from the graphite surface to the methane molecule.     

Formation of graphene on Ru（0001） surface

We report on the formation of a graphene monolayer on a Ru(0001) surface by annealing the Ru(0001) crystal. The samples are characterized by scanning tunnelling microscopy (STM) and Auger electron spectroscopy (AES). STM images show that the Moir\'{e} pattern is caused by the graphene layer mismatched with the underlying Ru(0001) surface and has an $N\times N$ superlattice. It is further found that the graphene monolayer on a Ru(0001) surface is very stable at high temperatures. Our results provide a simple and convenient method to produce a graphene monolayer on the Ru(0001) surface, which is used as a template for fabricating functional nanostructures needed in future nano devices and catalysis.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Tunable Adsorption and Desorption of Hydrogen Atoms on Single-Walled Carbon Nanotubes

Chemical adsorption and desorption of hydrogen atoms on single-walled carbon nanotubes(SWNTs) are investigated by using molecular dynamics simulations.It is found that the adsorption and desorption energy of hydrogen atoms depend on the hydrogen coverage and the diameter of the SWNTs.Hydrogen-adsorption geometry at the coverage of 1.0 is more energetically stable.The adsorption energy decreases with the increasing diameter of the armchair tubes.The adsorption and desorption energy of hydrogen atoms can be modified reversibly by externally radial deformation.The averaged C-H bond energy on the high curvature sites of the deformed tube increases with increasing radial deformation,while that on the low curvature sites decreases.     

Cs/GaN(0001)吸附体系电子结构和光学性质研究

采用基于第一性原理的密度泛函理论平面波超软赝势方法计算了 1/4ML Cs原子吸附 (2 × 2) GaN(0001) 表面的吸附能、能带结构、电子态密度、电荷布居数、功函数和光学性质. 计算发现, 1/4ML Cs 原子在 GaN(0001) 表面最稳定吸附位为 N 桥位, 吸附后表面仍呈现为金属导电特性, Cs原子吸附GaN(0001)表面后主要与表面 Ga 原子发生作用, Cs6s 态电子向最表面 Ga 原子转移, 引起表面功函数下降. 研究光学性质发现, Cs 原子吸附 GaN(0001) 表面后, 介电函数虚部、吸收谱、反射谱向低能方向移动.     

Oscillations in the threshold photoemission spectra of GaN(0001) with submonolayer Cs coverages

It is found that Cs adsorption on the n-type GaN(0001) surface generates an unusual change in the electronic properties of the surface and the near-surface space-charge layer, which leads to the appearance of photoelectron emission upon excitation in the transparent region of GaN. It is established that the photoemission is due to the formation of quasimetallic states induced by Cs adsorption in the band-bending region near the surface. The behavior of the photoemission threshold upon excitation by s-polarized light is studied as a function of the Cs coverage. It is found that the minimum value of the threshold corresponds to ～1.4 eV at a concentration of Cs atoms of ～4.5×10¹⁴ atom/cm² in the submonolayer coverage. A new effect is revealed, namely, the appearance of oscillations in the spectral curves of threshold photoemission. A model is proposed for photocurrent oscillations that takes into account the formation of quasimetallic states in the near-surface layer of GaN band bending and the occurrence of interference in the GaN slab upon light irradiation in the transparent region.     

TiO2分子在GaN(0001)表面吸附的理论研究

采用基于密度泛函理论的平面波超软赝势法,计算了TiO₂分子在GaN(0001)表面的吸附成键过程、吸附能量和吸附位置. 计算结果表明不同初始位置的TiO₂分子吸附后,Ti在fcc或hcp位置,两个O原子分别与表面两个Ga原子成键,Ga-O化学键表现出共价键特征,化学结合能达到7.932-7.943eV,O-O连线与GaN[1120]方向平行,与实验观测(100)[001] TiO₂//(0001)[1120]GaN一致. 通过动力学过程计算分析,TiO₂分子吸附过程经历了物理吸附、化学吸附与稳定态形成的过程,稳定吸附结构和优化结果一致. 关键词： GaN(0001)表面 2分子')" href="#">TiO₂分子 密度泛函理论 吸附     

A density functional study of atomic hydrogen and oxygen chemisorption on the relaxed (0001) surface of double hexagonal close packed americium

Ab initio total energy calculations within the framework of density functional theory have been performed for atomic hydrogen and oxygen chemisorption on the (0001) surface of double hexagonal packed americium using a full-potential all-electron linearized augmented plane wave plus local orbitals method. Chemisorption energies were optimized with respect to the distance of the adatom from the relaxed surface for three adsorption sites, namely top, bridge, and hollow hcp sites, the adlayer structure corresponding to coverage of a 0.25 monolayer in all cases. Chemisorption energies were computed at the scalar-relativistic level (no spin-orbit coupling NSOC) and at the fully relativistic level (with spin-orbit coupling SOC). The two-fold bridge adsorption site was found to be the most stable site for O at both the NSOC and SOC theoretical levels with chemisorption energies of 8.204 eV and 8.368 eV respectively, while the three-fold hollow hcp adsorption site was found to be the most stable site for H with chemisorption energies of 3.136 eV at the NSOC level and 3.217 eV at the SOC level. The respective distances of the H and O adatoms from the surface were found to be 1.196 ?and 1.164 ?. Overall our calculations indicate that chemisorption energies in cases with SOC are slightly more stable than the cases with NSOC in the 0.049–0.238 eV range. The work functions and net magnetic moments respectively increased and decreased in all cases compared with the corresponding quantities of bare dhcp Am (0001) surface. The partial charges inside the muffin-tins, difference charge density distributions, and the local density of states have been used to analyze the Am-adatom bond interactions in detail. The implications of chemisorption on Am 5f electron localization-delocalization are also discussed.     

Pd对O吸附在ZnO（0001）面上的影响的第一性原理研究

本文用第一性原理方法计算了Pd 在ZnO(0001)面上的吸附、Pd对O吸附的影响及Pd替代表面Zn原子能量的变化.结果表明：(1) Pd的吸附位置不随覆盖度变化,Pd稳定吸附位为H3位;(2)Pd在1/4单层吸附时比1个单层吸附时稳定;(3)Pd的存在增强了氧在ZnO(0001)面上的吸附,O原子可以扩散到Pd吸附层的下,Pd处于最上面, 具有催化作用.     

HREELS of H/GaN(0001): evidence for Ga termination

Two issues relevant to the growth and processing of GaN are the termination of the GaN(0001) surface and its reaction with hydrogen. We have used high-resolution electron energy loss spectroscopy (HREELS), low-energy electron diffraction (LEED), and Auger electron spectroscopy (AES) to study the adsorption of hydrogen on MOCVD-grown GaN(0001). LEED of the sputtered and annealed surface shows evidence of facetting. No adsorbate vibrations are observed on the clean surface by HREELS, only Fuchs–Kliewer phonons at intervals of 700 cm⁻¹. Following exposure of the clean GaN surface to hydrogen atoms, HREEL spectra show adsorbate loss peaks at 2580, 3280, and 3980 cm⁻¹. The Ga–H stretching vibration at 1880 cm⁻¹ becomes evident when the HREEL spectrum is deconvoluted to remove the phonon multiple-loss peaks. We assign the 2580, 3280, and 3980 cm⁻¹ peaks to combination modes of the Ga–H stretch and phonon(s). Upon dosing with deuterium, the Ga–D bending mode is observed at 400 cm⁻¹. No vibrational peaks due to N–H (N–D) species are observed after H (D) exposure. We conclude that sputtered and annealed GaN(0001) is Ga-terminated.     

Passivation effects of phosphorus on 4H-SiC(0001) Si dangling bonds: A first-principles study

The effect of phosphorus passivation on 4H-SiC(0001) silicon(Si) dangling bonds is investigated using ab initio atomistic thermodynamic calculations. Phosphorus passivation commences with chemisorption of phosphorus atoms at high-symmetry coordinated sites. To determine the most stable structure during the passivation process of phosphorus, a surface phase diagram of phosphorus adsorption on SiC(0001) surface is constructed over a coverage range of 1/9–1 monolayer(ML). The calculated results indicate that the 1/3 ML configuration is most energetically favorable in a reasonable environment. At this coverage, the total electron density of states demonstrates that phosphorus may effectively reduce the interface state density near the conduction band by removing 4H-SiC(0001) Si dangling bonds. It provides an atomic level insight into how phosphorus is able to reduce the near interface traps.     

Optoelectronic properties of two-dimensional GaN adsorbed with H,N and O: A first-principle study

In this paper, we have investigated optoelectronic properties of two-dimensional GaN adsorbed with non-metal atoms: H, N and O based on first-principle. We find that adsorption of H, N and O atom on 2D GaN is achieved by chemisorption, and the most stable adsorption site is at the top of N atom. Band structure of 2D GaN after adsorbing H atom moves to low energy region and two-dimensional GaN is transformed into an n-type semiconductor. After adsorption of N atom, a new impurity energy appears at the Fermi level, and N adatom could induce magnetism into 2D GaN. Static dielectric constants of 2D GaN increase and adsorption spectrums have extend to infrared band when adsorbing H and N. Strong reflection peaks and strong adsorption peaks after adsorption are located at deep ultraviolet range, which is beneficial for optoelectronic application in the deep ultraviolet. Specifically, two-dimensional GaN adsorbed with H atom is more conducive to manufacture of nano-optoelectronic devices.     

Theoretical study of Ni adsorption on the GaN(0 0 0 1) surface

First-principles pseudo-potential calculations within density-functional theory framework are performed in order to study the structural and electronic properties of nickel adsorption and diffusion on a GaN(0 0 0 1)-2×2 surface. The adsorption energies and potential energy surfaces are investigated for a Ni adatom on the Ga-terminated (0 0 0 1) surface of GaN. This surface is also used to study the effect of the nickel surface coverage. The results show that the most stable positions of a Ni adatom on GaN(0 0 0 1) are at the H₃ sites and T₄ sites, for low and high Ni coverage respectively. In addition, confirming previous experimental results, we have found that the growth of Ni monolayers on the GaN(0 0 0 1) surface is possible.