Ca(BH_4)_2络合物电子结构及热力学稳定性的第一性原理研究

利用第一性原理研究了低温及高温相Ca(BH_4)_2络合物的电子结构、晶格振动及其反应焓.计算结果表明:低温及高温相Ca(BH_4)_2中Ca~(+2)与[BH_4]~-以离子键形式相结合,[BH_4]~-离子中B原子和H原子以共价键形式相结合,对该共价键有贡献的主要是B原子的2p轨道电子,H原子的1s轨道电子.Ca(BH_4)_2可能的反应路径为:Ca(BH_4)_2→2CaH_2+CaB_6+10H_2,该反应在300 K下反应焓为43.22 kJ/molH_2.拉伸B—H键所对应的声子频率较高,其值为2360～2500 cm~(-1),这可能是导致B—H键断裂释放氢气需要较高温度的主要原因之一.     

Li_2NH晶体结构建模和电子结构的第一性原理研究

基于密度泛函理论的赝势-平面波方法,采用三种模型分别研究Li,N原子对N—H键方位的影响以及N—H键间的相互影响,得到了Li2NH的晶体结构和H原子的占位位置.计算结果表明:Li2NH晶体为层状结构,空间群为P42,晶胞中4个N—H键分为两层,层内N—H键为反平行排列,层间N—H键为垂直排列.态密度和电子局域函数(ELF)分析表明,N—H键呈明显的共价键特性,Li和N—H键呈明显的离子键相互作用.可逆储氢反应Li2NH+H2/LiNH2+LiH在温度0K时的反应焓为69.6kJ/molH2,与实验结果66kJ/molH2符合得较好.     

三氧化钨表面氢吸附机理的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,在广义梯度近似下,研究了立方WO_3,WO_3(001)表面结构及其氢吸附机理.计算结果表明立方晶体WO_3理论带隙宽度为0.587 eV.WO_3(001)表面有WO终止(001)表面和O终止(001)表面两种结构,表面结构优化后W—O键长和W—O—W键角改变,从而实现表面弛豫;WO终止(001)表面和O终止(001)表面分别呈现n型半导体特征和p型半导体特征.分别计算了H原子吸附在WO终止(001)表面和O终止(001)表面的H—O_(2c)—H,H—O_(2c)…H—O_(2c),H—O_(1c)—H和H—O_(1c)…H—O_(1c)四种吸附构型,其中H—O_(1c)—H吸附构型的吸附能最小,H—O键最短,H失去电子数最多,分别为-3.684 eV,0.0968 nm和0.55e,此吸附构型最稳定.分析其吸附前后的态密度,带隙从吸附前的0.624 eV增加到1.004 eV,价带宽度基本不变.H的1s轨道电子与O的2p,2s轨道电子相互作用,在-8和-20 eV附近各形成了一个较强的孤立电子峰,两个H原子分别与一个O_(1c)原子形成化学键,最终吸附反应生成了一个H_2O分子,同时产生了一个表面氧空位.     

Eu2+在新型基质Ca8Mg(SiO4)4Cl2中的光致发光

用CaCO3(A.R.),SiO2(4N),Mg(NO3)2·6H2O(A.R.),CaCl2(A.R.)和Eu2O3(4N)为原料,经高温固相反应,得到了新荧光体Ca8-xMg(SiO4)4Cl2:Eux2+.对该荧光体的晶体结构和荧光光谱进行分析发现:该荧光体可能为单中心发光,Eu2+主要占据对称性为C2的CaⅡ格位.     

NH3分子在LiH(100)表面吸附的第一性原理研究

采用第一性原理方法研究了NH3分子在LiH(100)晶面的表面吸附情况. 通过研究LiH(100) /NH3体系的吸附位置、吸附能和电子结构,发现NH3分子在Li3N (100)晶面主要是化学吸附,初始位置为NH3分子中N-H键在Li顶位时失去一个H原子,并在LiH(110)面形成NH2基,其吸附能为0.511 eV,属于强化学吸附,吸附作用最强. 此时NH2基与附近H原子和Li原子之间为离子键作用,NH2基中N—H键为共价键;NH3分子中另一个H原子与LiH表面的一个H原子形成一个H2分子逸出表面. H2分子中H-Ｈ键为明显的共价键.     

内嵌富勒烯[M@C70] (M=Li, Na, K, Be, Mg, Ca)与[Mg(H2O)6]2+相互作用的密度泛函理论研究

使用密度泛函理论方法, 对内嵌多种碱金属及碱土金属原子(M=Li, Na, K, Be, Mg, Ca)的富勒烯C70与水合Mg(II)离子之间的相互作用进行了理论研究. 首先对各原子(M=Li, Na, K, Be, Mg, Ca)嵌入C70后的形成能进行了讨论, 之后计算了[M@C70]各体系与[Mg(H2O)6]2+的相互作用能, 并采用自然键轨道理论(NBO)研究了电荷转移的情况, 最后进行了电子密度拓扑分析. 结果表明, 内嵌原子半径越大, [M@C70]各体系的热力学稳定性就越高, 转移至[Mg(H2O)6]2+的电荷也随之增加, 二者之间的相互作用属于闭壳层相互作用及共价作用.     

W_(20)O_(58)(010)表面氢吸附机理的第一性原理研究

采用基于密度泛函理论的第一性原理平面波超软赝势方法,在广义梯度近似下,研究了W_(20)O_(58)晶胞、W_(20)O_(58)(010)表面结构及其氢吸附机理.计算结果表明:W_(20)O_(58)晶体理论带隙宽度为0.8 eV,为间接带隙,具有金属性.W_(20)O_(58)晶体中W—O共振较强,以共价键居多.W_(20)O_(58)(010)表面有WO终止(010)表面和O终止(010)表面,表面结构优化后使得W—O键长和W—O—W键角改变,从而实现表面弛豫.分别计算了H_2分子吸附在WO终止(001)表面和O终止(001)表面的WO-L-O_(1c),WO-V-O_(1c),WO-L-O_(2c),WO-V-O_(2c),O-L-O_(1c)和O-V-O_(1c)六种吸附构型,其中WO-L-O_(1c),WO-V-O_(1c)和WO-L-O_(2c)这三种吸附构型不稳定;而WO-V-O_(2c),O-L-O_(1c)和O-V-O_(1c)这三种吸附构型都很稳定,H_2分子都解离成两个H原子,吸附能均为负值,分别为-1.164,-1.021和-3.11 eV.WO-V-O_(2c)吸附构型的两个H原子分别吸附在O和W原子上;O-L-O_(1c)吸附构型的两个H原子,一个与O原子成键,另一个远离了表面.其中O-V-O_(1c)吸附构型最稳定,两个H原子失去电子,为O原子提供电子.分析其吸附前后的态密度,H的1s轨道电子与O的2p,2s轨道电子相互作用,均形成了一些较强的成键电子峰,两个H原子分别与O_(1c)形成化学键,最终吸附反应生成了一个H_2O分子,同时产生了一个表面氧空位.     

(Ca3N2)n(n=1—4)团簇结构与性质的密度泛函理论研究

用密度泛函理论(DFT)的杂化密度泛函B3LYP方法在6-31G^*基组水平上对(Ca₃N₂)_n(n=1—4)团簇各种可能的构型进行几何结构优化,预测了各团簇的最稳定结构.并对最稳定结构的振动特性、成键特性、电荷特性和稳定性等进行了理论分析.结果表明,(Ca₃N₂)_n(n=1—4)团簇最稳定构型中N原子为3—5配位,Ca—N键长为0.231—0.251nm,Ca—Ca键长为0.295—0.358nm;N原子的自然电荷在-1.553e—-2.241e之间,Ca原子的自然电荷在1.035e—1.445e之间,Ca和N原子间相互作用呈现较强的离子性,Ca₃N₂和(Ca₃N₂)₃团簇有相对较高的动力学稳定性. 关键词： 3N₂)_n(n=1—4)团簇')" href="#">(Ca₃N₂)_n(n=1—4)团簇 密度泛函理论 结构与性质     

NH3与MgH2反应机理的密度泛函理论研究

采用密度泛函理论B3LYP方法研究了NH3与MgH2的放氢反应机理,在6-311G(d, p)基组水平上对反应物、中间体、过渡态及产物进行了全几何参数优化。频率分析和内禀反应坐标(IRC)计算证实了中间体和过渡态的正确性和相互连接关系。计算结果表明。反应分两步单通道的氢取代过程,且反应过程相类似,反应生成Mg(NH2)2和2H2。两步氢取代反应所释放的H2中两个H原子分别来源于NH3和MgH2。反应脱氢的关键在于克服N—H键断裂所需能量。     

(Ca3N2)n(n=1-4)团簇结构与性质的密度泛函理论研究

用密度泛函理论(DFT)的杂化密度泛函B3LYP方法在6-31G*基组水平上对(Ca3N2)n(n=1-4)团簇各种可能的构型进行几何结构优化,预测了各团簇的最稳定结构.并对最稳定结构的振动特性、成键特性、电荷特性和稳定性等进行了理论分析.结果表明,(Ca3N2)n(n=1-4)团簇最稳定构型中N原子为3-5配位,Ca-N键长为0.231-0.251 mm,Ca-Ca键长为0.295-0.358 nm;N原子的自然电荷在-1.553 e--2.241 e之间,Ca原子的自然电荷在1.035e-1.445e之间,Ca和N原子间相互作用呈现较强的离子性,Ca3N2和(Ca3N2)3团簇有相对较高的动力学稳定性.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.