单频脉冲光纤放大器中受激布里渊散射实验研究

从实验上研究了掺镱(Yb)双包层光纤放大器中单频脉冲信号放大时,受激布里渊散射(SBS)引起的脉冲畸变现象。实验中采用的单频双包层光纤放大器光纤长度14m,内包层直径130μm,纤芯模场直径6.5μm,在单频脉宽200 ns脉冲放大,且峰值功率3.3 W时观察到后向SBS脉冲,脉宽明显小于输入信号脉宽,分析了受激布里渊散射引起放大脉冲波形畸变的随机特性和功率特性,并采用自由光谱范围30 GHz的法布里-珀罗(F-P)扫描干涉仪验证了SBS频移。     

S波段光纤拉曼放大器中级联受激布里渊散射串扰的实验研究

研究了光纤激光器前向抽运的S波段分布式光纤拉曼放大器中级联的受激布里渊散射(SBS)串扰现象。用窄光谱带宽(<100MHz)的可调谐激光二极管作为信号源,通过S波段分布式光纤拉曼放大器,当被放大的信号功率超过单模光纤受激布里渊散射的阈值时,出现了前向受激布里渊散射,这是传导声波布里渊散射在光纤放大器中放大的现象。随着拉曼放大器抽运功率的提高,在斯托克斯区,出现了两阶受激布里渊散射线,在实验中观测到偶数阶的受激布里渊散射谱线功率大于奇数阶的布里渊一瑞利散射线。当进一步增加拉曼放大器的抽运功率,出现了前向级联的多阶受激布里渊散射现象,拉曼放大器的增益下降,被放大的信号功率转换为受激布里渊散射,噪声变大。受激布里渊散射的串扰破坏了拉曼放大器的特性,使拉曼放大器无法在密集波分复用光纤传输系统中使用,因此需要严格地控制入纤的信号功率和放大器的抽运功率。在实验中还观测到在光纤拉曼放大器中被放大的信号光和受激布里渊散射线两侧的伴线。     

后向泵浦高功率掺镱光纤放大器的非弹性散射效应

 在考虑受激布里渊散射和受激喇曼散射效应的基础上,数值求解了双包层掺镱光纤放大器的速率-传输方程,分析了后向泵浦高功率掺镱光纤放大器在不同信号光线宽、光纤长度和纤芯直径下的输出特性,研究了受激布里渊散射和受激喇曼散射的抑制条件。计算结果表明:在后向泵浦方式下,若掺镱光纤长度小于0.68 m,纤芯直径大于26 μm,信号光线宽大于0.04 nm,则放大过程中的受激布里渊散射和受激喇曼散射能同时得到有效抑制。     

增益竞争双波长放大单频光纤放大器理论研究

引入增益竞争是抑制单频光纤放大器中受激布里渊散射(SBS)的有效方式. 在单频光纤放大器的基础上, 推导了描述增益竞争双波长放大单频掺镱双包层光纤放大器的稳态速率方程组, 建立了增益竞争双波长放大单频光纤放大器的理论模型; 利用建立的理论模型模拟分析了信号光波长间隔、 信号光种子功率比、 抽运方式和增益光纤长度等因素对放大器的单频激光输出 效率以及SBS抑制效果的影响.     

掺镱光纤放大器中的热效应分析

为了研究掺镱双包层单频光纤放大器中受激布里渊散射产生的规律,从含有受激布理渊散射的速率方程和热传导方程出发,对光纤放大器中的热效应问题进行了理论分析.讨论了泵浦功率、包层半径和换热系数对受激布理渊散射的影响,所得结论为实验研究单频光纤放大器中受激布理渊散射的变化规律提供了理论依据.     

掺镱光纤放大器中的热效应分析

为了研究掺镱双包层单频光纤放大器中受激布里渊散射产生的规律,从含有受激布理渊散射的速率方程和热传导方程出发,对光纤放大器中的热效应问题进行了理论分析.讨论了泵浦功率、包层半径和换热系数对受激布理渊散射的影响,所得结论为实验研究单频光纤放大器中受激布理渊散射的变化规律提供了理论依据.     

高峰值功率大模场全光纤脉冲放大器

报道了一种由纤芯直径分别为15μm和25μm的大模场光纤组成的全光纤脉冲放大器模块.当注入脉冲宽度为10 ns,重复频率为1 Hz.光谱宽度为0.3 nm,脉冲能量为80 nJ的激光脉冲时,经过两级放大输出的激光脉冲峰值功率为30 kW,单脉冲能量为300μJ.此外,实验研究了该放大器模块输出的时间特性.研究发现:由于受激布里渊散射(SBS)效应,限制了单纵模光纤激光在光纤中的高能量放大,采用宽带激光脉冲可以有效地抑制SBS效应,提高光纤放大器的SBS阈值.     

水中受激布里渊散射微弱Stokes信号光的高增益放大

采用脉冲宽度为7.2 ns的种子光注入式倍频Nd:YAG脉冲激光器,以CS₂为放大介质,实验并理论研究了水中受激布里渊散射微弱Stokes光的信号增益随延迟时间、放大器池长、抽运光能量的变化规律. 结果表明,当抽运光脉冲相对信号光脉冲延迟进入放大器,且延迟时间为脉冲宽度的一半,抽运光能量略低于介质受激布里渊散射阈值,选择合适的放大器池长可获得最佳的信号增益. 适当选择抽运光能量,亦可实现微弱信号光的线性放大. 实验中采用独立双池放大系统,当水中Stokes信号光的能量为1 pJ时,信 关键词： 布里渊放大器 信号增益 延迟时间 抽运光能量     

变温条件下受激布里渊散射增益系数的实验测量

从理论及实验上分析了介质温度对受激布里渊散射(stimulated Brillouin scattering, SBS)阈值及增益系数的影响.在理论分析的基础上, 提出了一种通过测量SBS阈值来决定介质SBS增益系数的新方法. 实验及测量结果表明, SBS增益系数会随着介质温度的增加而呈现指数上升的趋势. 关键词： 受激布里渊散射 阈值 增益系数     

大功率单频多芯光纤放大器中抑制受激布里渊散射的分析

针对多芯光纤完善了描述抽运光、信号光和Stokes信号的速率方程组.考虑了温差对受激布里渊散射的影响,利用有限元法求解温度分布方程组,分析了前向和后向抽运方式、对流系数、Stokes初始功率、光纤掺杂粒子密度和光纤长度对受激布里渊散射增益的影响.研究表明：后向抽运方式在抑制受激布里渊散射方面具有明显优势;减小对流系数有助于抑制受激布里渊散射;提高光纤掺杂密度能够加强抑制受激布里渊散射,同时也有助于提高光纤放大器的斜率效率.比较了在相同最佳光纤长度条件下,单芯和19芯光纤放大器的最高工作温度和受激布里渊散射 关键词： 光纤放大器 受激布里渊散射 大功率 有限元法     

Suppression of stimulated Brillouin scattering in high-power single-frequency fiber amplifiers

The effect of temperature variation along a high-power fiber amplifier on the stimulated Brillouin scattering (SBS) threshold is considered theoretically. We show that for an end-pumped rare-earth-doped double-clad fiber the inhomogeneous distribution of temperature, which is caused by the absorption of pump radiation, may result in total suppression of SBS even for output powers well above 200 W.     

Numerical analysis of stimulated inelastic scatterings in ytterbium-doped double-clad fiber amplifier with multi-ns-duration and multi-hundred-kW peak-power output

We investigate the stimulated Brillouin scattering (SBS) and the stimulated Raman scattering (SRS) in an ytterbium-doped double-clad fiber amplifier that outputs optical pulses with multi-ns-duration and multi-hundred-kW peak-power. The ytterbium-doped double-clad fiber amplifier is simulated by a model which is composed of a set of propagation-rate equations. The simulated results show that SBS and SRS will deform the output signal pulse in both the time domain and the spectral domain, and degrade the performance of the ytterbium-doped double-clad fiber amplifier seriously. It is shown in our simulation that the troublesome SBS can be effectively suppressed by broadening the signal linewidth to a critical value of 0.07 nm in our calculation, and the effect of SRS can be suppressed using a large-mode-area fiber with proper length. The model and the simulated results are very useful for designing an ultra-high-power ytterbium-doped double-clad fiber amplifier.     

Numerical analysis of stimulated Brillouin scattering in high-power double-clad fiber lasers

A theoretical analysis of stimulated Brillouin scattering (SBS) in linear cavity Yb³⁺-doped double-clad fiber lasers is presented by solving the steady-state rate equations with the SBS. The effects of cavity length, fiber core diameter, input mirror reflectivity at Stokes wavelength, Yb³⁺ concentration and laser linewidth on the SBS are discussed. Numerical results show that the SBS threshold power can be improved by shortening the cavity length, using large mode area fiber, reducing the input mirror reflectivity at Stokes wavelength, lowering the Yb³⁺ concentration and broadening the laser linewidth, and the influence of the laser linewidth on the SBS threshold power is more noticeable than other system parameters.     

光纤放大器受激布里渊散射效应抑制

提出了一种多波长窄线宽光纤放大器,其种子光由多个单频激光耦合而成,所有单频激光波长几乎相等（波长间隔小于1 nm）,频率间隔大于两倍布里渊频移。建立了此类多波长窄线宽光纤放大器的完整理论模型,分析了放大器中受激布里渊散射（SBS）与种子数目的关系。搭建了双波长和三波长窄线宽光纤放大器,进行SBS阈值输出功率测定实验。实验结果与理论模拟结果基本一致,验证了理论模型的合理性;双波长和三波长放大可以有效抑制SBS效应,大幅提高放大器输出功率。     

Passive combination of multiple beams in an optical fiber via stimulated Brillouin scattering

We demonstrate passive combination of multiple beams in an optical fiber via stimulated Brillouin scattering (SBS). Four off-axis beams are combined in a long multimode optical fiber using a novel all-optical mount. The combined beam has the high spatial coherence properties of the LP(01) mode owing to the beam cleanup properties of SBS. The threshold for SBS when off-axis pumps are used is shown to be a factor of 13 times higher than for on-axis pump beams. We propose this method would improve the brightness of an array of fiber amplifiers.     

Influence of stimulated Brillouin scattering on the temporal dynamics of an actively Q-switched double-clad fiber laser

The role of stimulated Brillouin scattering (SBS) during the active Q-switching of a typical high power double-clad fiber laser is experimentally and theoretically investigated. Our numerical model reproduces multiples Brillouin Stokes generation and the fast temporal dynamics which were experimentally observed. It clearly demonstrates that SBS is the cause of peak power enhancement effects such as giant pulse generation. The pulse formation process during the active Q-switching and the precise role of SBS in the pulse narrowing is detailed.     

Experimental study of SBS suppression and coherence property of 1064 nm high power multi-tone fiber amplifier

Seeding high power fiber amplifier employing multi-tone fiber laser is an effective approach to suppress stimulated Brillouin scattering (SBS). In this paper, a two-stage 1064 nm high power fiber amplification system was set up. Single-, two- and three-tone fiber lasers were employed. SBS threshold powers and maximum output powers of the multi-tone cases are enhanced compared with the single-tone case. The multi-tone amplifiers also show comparable optical-to-optical efficiency to the single-tone amplifier. To demonstrate and validate coherence property of the two multi-tone fiber amplifiers, the output laser beams of the amplifiers were self-interfered in our self-made coherent beam combining system. The laser beams of the multi-tone cases showed good coherence property comparable to the single-tone case, which implied that the high power output laser light of the multi-tone fiber amplifiers could be used for coherent beam combining.     

Chaotic stimulated Brillouin scattering near the threshold in a fiber

We investigate the nonlinear dynamic behavior of stimulated Brillouin scattering (SBS) near threshold in the absence of feedback. When a cw Nd:YAG laser is injected into a single-mode optical fiber, the SBS signal exhibits intermittently appearing irregular self-pulsations near the threshold. By examining the time series of the SBS signals, we verify that the irregular SBS signal is one of the chaotic phenomena appearing near the bifurcation point.