LED光源数字全息技术研究

研究以发光二极管(LED)作为光源的部分相干光数字全息技术.首先研究LED的时间相干性和空间相干性,尽管LED的时间相干性较差,但空间相干性可以通过减小光源发光面积来提高.利用LED的时间相干性较差、相干长度短的特点,抑制相干噪声,改善数字全息重建质量.在同一全息记录系统,通过实验,比较了用激光和LED光源的数字全息重建图像质量.结果表明:基于LED光源的数字全息,完全消除了使用激光光源的散斑噪声和由光学元件引入的寄生干涉噪声,物光场的重现质量,包括振幅和相位都得到了很大提高.但由于LED光源的较低的空间相干性,一般只适用于同轴相移数字全息,待测物体的厚度在十几微米以内,应用受到一定限制.     

Reduction of speckle noise in digital holography by using digital image processing

A fundamental problem in optical and digital holography is the presence of speckle noise in the reconstruction process. Many approaches have been carried out in order to overcome such a problem ranging from modifying the spatial coherence of the illumination (optical techniques) to image processing techniques (digital techniques). This work shows the merged use of digital image processing techniques in order to reduce the speckle noise in digital reconstruction of optically recorded Fresnel's holograms. The proposed filtering techniques are illustrated with experimental results.     

光学元件表面粗糙度对第三代同步辐射光源空间相干性的影响

以单丝的同轴全息干涉花样为判别标准,通过计算机数值模拟,研究了Ｂｅ窗的表面粗糙度对硬Ｘ射线相干特性的影响。提出了Ｘ射线在粗糙表面反射的一个简单模型,以此为基础模拟研究了反射镜表面粗糙度的对硬Ｘ射线及软Ｘ射线空间相干特性的影响,模拟结果与实验结果相符。     

Characterisation of light emitting diodes (LEDs) for application in digital holographic microscopy for inspection of micro and nanostructured surfaces

Partial coherent light sources open up prospects for phase noise reduction in digital holographically reconstructed phase distributions by suppressing multiple reflections in the experimental setup. Thus, light emitting diodes (LEDs) are investigated for application in digital holographic microscopy. First, the spectral properties and the resulting coherence length of an LED are characterised. In addition, an analysis of dispersion effects and their influence on the hologram formation is carried out. The coherence length of LEDs in the range of a few micrometers restricts the maximum interference fringe number in off-axis holography for spatial phase shifting. Thus, the application of temporal phase-shifting-based digital holographic reconstruction techniques is compared to spatial phase-shifting-based methods. It is demonstrated that LEDs are applicable for digital holographic microscopy in connection with both spatial and temporal phase-shifting-based techniques for reduction of noise in comparison to a laser-light-based experimental setup.     

Numerical heterodyne holography with two-dimensional photodetector arrays

We present an original heterodyne holography method for digital holography that relies on two-dimensional heterodyne detection to record the phase and the amplitude of a field. The technique has been tested on objects as much as 13 mm in size. Consistency checks were performed, and high-resolution images were computed. We show the requirement for a spatial filter to select properly sampled near-axis photons. Heterodyne holography is superior to off-axis digital holography for both field of view and resolution.     

数字全息图取样模型的简化研究

数字全息研究领域目前存在两种不同的数字全息图取样模型.按照这两种模型进行研究时, 不但涉及较复杂的数学运算, 在许多情况下还会导致不同的研究结果, 不便于理论分析及实际应用.基于对数字全息图记录的物理过程分析及电荷藕合器件(charge coupled device, CCD)几何结构的研究, 本文将这两种取样模型简化为相同的数学表达式. 利用数字全息图的余弦级数展开及取样定理对简化模型的研究表明, 简化模型不但具有清晰的物理意义, 而且可以方便地为应用研究服务. 基于简化模型对物光波通过光学系统到达CCD的数字全息记录系统进行了研究, 导出得到实验证实的波前重建表达式. 关键词： 数字全息 波前重建 相干光成像     

三维立体显示技术研究新进展

在分析传统基于二维平面图像的三维立体显示技术的原理及特点的基础上,重点阐述了数字全息三维显示技术的应用研究现状,介绍了三种典型的数字全息显示技术:基于数字合成全息的三维显示技术、基于空间光调制器的数字全息三维显示技术以及基于集成数字全息技术的三维显示技术,并对三维显示技术研究及其应用中存在的关键技术问题进行了分析和讨论。     

内源全息术的原理和数学描述

以往的全息术在对原子成像时,在相干光源、探测器空间分辨和信号强度三个方面遇到了难以克服的困难. 阐述了内源全息术克服这些困难的原理,研究了内源全息术的记录和再现全过程,推导出内源球面全息图的再现公式,并在散射因子球对称近似和能量无关近似下,推导出以δ函数表示原子全息再现像的解析表达式. 关键词： 内源全息术 同步辐射 晶体结构 傅里叶变换     

Perfect digital holographic imaging with high resolution using a submillimeter-dimension CCD sensor

In order to improve the resolution of digital holography with a common-dimension charge-coupled device (CCD) sensor, the point spread functions are briefly derived for the commonly used and practical post-magnification, pre-magnification, and image-plane digital holographic microscopic systems. The ultimate resolutions of these systems are analyzed and compared. The results show that the ultimate lateral resolution of pre-magnification digital holography is superior to that of post-magnification digital holography in the same conditions. We also demonstrate that the ultimate lateral resolution of image-plane digital holography has no correlation with the photosensitive dimension of the CCD sensor, and it is not significantly related to the pixel size of the sensor. Moreover, both the ultimate resolution and the imaging quality of image-plane digital holography are superior to that of pre- and post-magnification digital holographic microscopy. High-resolution imaging, whose resolution is close to the ultimate resolution of the microscope objective, can be achieved by image-plane digital holography even with a submillimeter-dimension sensor. This system, by which perfect imaging can be achieved, is optimal for commonly used digital holographic microscopy. Experimental results demonstrate the correctness of the theoretical analysis.     

孪生光束干涉法测量光源的空间相干性

定量测定光源空间相干性在部分相干光成像, 非相干全息术及光信息处理领域具有重要的研究价值. 本文基于三角全息干涉光路提出了一种测量光源空间相干性的新方法. 利用三角干涉全息光路系统中分束镜产生的孪生光束进行干涉获得干涉图, 通过调整光源中心位置在写入平面内偏离光轴的量, 改变两孪生光束空间分离量的大小, 采集对应的一系列干涉图, 计算干涉图样的对比度, 从而对光源照明空间的波前上一系列不同距离的点对之间的空间复相干度进行测量. 实验系统光路配置较为简单且不需要使用特殊加工的光学元件. 针对一个准单色的扩展光源设计并进行实验, 结果表明利用文中提出的方法可以准确的测量光源的空间相干性, 实验结果相对于理论计算值的误差仅为3.8%. 关键词： 相干性 全息干涉 干涉仪 光学应用     

基于有限脉冲响应滤波器的数字全息零级像消除

针对数字全息中零级像的存在影响数字再现像的质量,分析数字全息图的记录、再现原理及频谱特性,提出了一种利用有限脉冲响应滤波器消除全息图数字再现中零级像的方法.该方法只需记录一幅数字全息图,不需要相移器材或其他辅助设备,直接利用数字图像处理对数字全息图在空域进行预处理,消除全息再现时的零级像干扰.对比了数字模拟和实验拍摄到的全息图在应用有限脉冲响应滤波器消除零级像前后的再现结果,表明该方法可消除零级衍射像,改善重建像质量,并且算法简单.     

Photorefractive holography for imaging through turbid media using low coherence light

We report on imaging through solid scattering media with photorefractive holography using sources of low temporal and spatial coherence. Holograms were recorded through samples of moderate thickness by using low-cost light-emitting diodes. The reduction of speckle noise is demonstrated.     

球面参考光波数字全息的一些特点分析及实验

对以球面波作为参考光记录数字全息图的采样和再现分离条件进行了详细的分析。推导出了同时满足采样和再现分离条件时,CCD及物体的横向尺寸、物体及参考光源至CCD的距离之间需要满足的关系式,证明了完全散射物体上复振幅在记录面上的叠加可以等效为一个点光源在记录面上产生的效果,进行了相应的实验研究。结果表明：数字全息术中采用球面参考光波可以比采用平面参考光波更容易满足采样和分离条件,并可以记录到更多的物体信息;在物体至CCD的距离固定的情况下,无透镜傅里叶变换全息术是优化的记录光路结构;散射物体比衍射物体的数字全息图更容易满足采样和分离条件。     

雾化场光学全息与数字全息联合测量

针对雾化场光学全息测量存在干板湿化学处理繁琐、再现像采集耗时的问题,提出光学全息与数字全息联合测量的方法,建立由同轴光学全息、同轴数字全息以及数字延迟信号发生器组成的测量系统,并以双孔直射式喷嘴产生的雾化场为测量对象,利用该测量系统在一次测量中同时获得雾化场的光学全息和数字全息的再现图像,两者具有很好的一致性。光学和数字再现图像相对应的视场范围分别为27.87 mm4.77 mm和27.59 mm6.67 mm,数字方式获得视场范围内单一层面再现像的时间仅为8 s,而光学方式将近1 h。结果表明,光学全息与数字全息联合测量时,通过数字全息的雾化再现图像能够对实验总体效果进行实时评估,提高了雾化场全息测量的实验效率。     

CG光学扫描全息术和FZP光学扫描全息术分辨率比较

本文通过计算机仿真对ＦＺＰ 光学扫描全息术和ＣＧ 光学扫描全息术的横向和纵向分辨率进行了比较。无论是ＦＺＰ 还是ＣＧ 光学扫描全息术,其系统的分辨率与它们的环数有关,当环数越多时,分辨率越高。对于同样大小的ＦＺＰ 和ＣＧ,ＣＧ 光学扫描全息系统的分辨率比ＦＺＰ 光学扫描全息系统的分辨率要好     

Quantitative phase contrast imaging using common-path in-line digital holography

We propose a method to carry out quantitative phase contrast imaging using in-line digital holography. The phase shifting digital holography is implemented in a common-path in-line configuration with the help of diffraction from a phase grating displayed on a spatial light modulator. The phase shifted interferograms are recorded by shifting the grating within a selected area corresponding to the dc spot in the Fourier transform plane. The feasibility of method is verified by using a multimode fiber as phase object. The method addresses a number of challenges faced by existing methods and dispenses the need for special optics.     

Resolution in X-ray Holography

Ｒｅｃｅｉｖｅｄ２６Ｊａｎ．１９９５；Ｒｅｖｉｓｅｄｍａｎｕｓｃｒｉｐｔｒｅｃｅｉｖｅｄ１８Ａｐｒ．１９９５ＲｅｓｏｌｕｔｉｏｎｉｎＸ－ｒａｙＨｏｌｏｇｒａｐｈｙ￥ＺＨＵＰｅｉｐｉｎｇ；ＸＩＡＯＴｉｑｉａｏ；ＣＨＥＮＪｉａｎｗｅｎ；ＸＵＺｈｉｚｈａｎ...     

物光复合调制的数字全息散斑去噪方法

为了克服在数字全息术中激光源高相干度造成的散斑噪声降低成像质量问题,论文提出将石英退偏器与电控液晶散射片相结合用于数字全息术中。通过在物光路中加入一个石英退偏器,利用退偏器的退偏性能使物光光路中的线偏光变成随机偏振光,降低与参考光的相干程度,实现对散斑噪声的抑制;通过给液晶散射片外加电场可以引起液晶分子的运动和光轴取向改变,调整液晶驱动电压大小来改变入射光的不同散射效果,有效地降低了光源的相干性;分别将单独采用石英退偏器和电控液晶散射片的重建图像与组合装置的重建图像进行对比分析,通过实验验证了所提方法的有效性。实验结果表明：两种实验对象在组合装置下的重建像峰值信噪比分别达到16.91和18.30,结构相似度为0.47和0.43,等效视数较原始重建像提高了42%和30%,散斑指数为1.52和1.29。论文提出的方法可较好地去除散斑噪声,保留更多的图像细节部分。     

Acousto-optical coherence tomography with a digital holographic detection scheme

Acousto-optical coherence tomography (AOCT) consists in using random phase jumps on ultrasound and light to achieve a millimeter resolution when imaging thick scattering media. We combined this technique with heterodyne off-axis digital holography. Two-dimensional images of absorbing objects embedded in scattering phantoms are obtained with a good signal-to-noise ratio. We study the impact of the phase modulation characteristics on the amplitude of the acousto-optic signal and on the contrast and apparent size of the absorbing inclusion.     

Studies on aperture synthesis in digital Fresnel holography

Aperture synthesis can improve image resolution in digital holography by increasing the numerical aperture of the system. In this paper, we show that both the lateral resolution and image field of view can be enhanced at the same time using a more general Fresnel holography setup and hologram stitching. The impact of aperture synthesis on the lateral resolution is investigated both theoretically and experimentally. In the experiment, the synthesis is executed by moving the compact digital holographic system in two directions. Nine holograms are recorded and stitched into one hologram. The reconstruction results show that expanding aperture improves the lateral resolution. The lensless Fresnel holography used in this paper is demonstrated to have the ability to provide a larger numerical aperture and can compress the object spectrum in recording process.