旋转剪切散斑干涉法的研究

本文提出一种新的动态散斑照相法——旋转剪切散斑干涉法.文中给出了理论分析和初步的实验结果.该方法不仅能在一张剪切散斑图上记录物体动态变形的全过程,而且在全场滤波分析时能方便地给出任一瞬时物体的变形信息,得到清晰的、高衬比的干涉条纹图.该方法设备简单,用途广泛.     

研测动态问题的旋转孔径散斑照相法Ⅰ:双孔、四扇孔

本文提出一种研测动态问题的实验新方法——旋转孔径散斑照相法。该法设备简单,利用一个旋转孔径装置,能在一张散斑图上记录下物体动态变形的全过程,然后在全场波滤分析时把各瞬时的信息分离出来,可得任意时刻的瞬态位移场。转孔法能应用于振动和非周期性动态问题,并以三个实验证实其可行性。实验结果表明,散斑条纹清晰可靠,定量分析与其它方法所得结果一致。     

旋转孔径锥镜剪切散斑照相法

本文提出利用旋转孔径和锥镜进行剪切散斑照相,研测动态问题.该法能在一张散斑图上记录下物体动态变形的全过程,在全场滤波时可得到任意时刻的瞬态位移偏导数场.     

孔径旋转频闪散斑照相法测量物体的固有频率

提出了一种测量物体固有频率的新方法－－孔径旋转频闪散斑照相法。该方法能方便地测量振动物体的固有频率，具有精度高、全场显示、条纹可见度好等优点，给出了理论分析和实验结果。     

频闪剪切散斑干涉术的研究

提出了一种用于振动研究的方法——频闪剪切散斑干涉照相法。该方法由于采用了剪切镜,能得到较为精确的散斑剪切图,提高了测量的精度,是一种用于振动研究较为理想的散斑照相的新方法。讨论了频闪剪切散斑干涉术的基本原理,给出了频闪剪切散斑图的全场分析的平均光强分析的解析式,并给出了实验结果。理论和实验都表明频闪剪切散斑干涉照相法要优于时间平均剪切散斑干涉照相法。该方法在全场滤波分析时,能给出任一瞬时物体振动信息,得到清晰的、高衬比的全场干涉条纹图,是一种实用可行的方法。     

电子散斑归一化互相关法测位移

把粗糙物体表面受到相干光照明时产生的散斑场看作是一个稳态随机信号,在此基础上,本文提出了一种能做到大量程,高精度位移测量的新方法——电子散斑归一化互相关法测位移或称电子散斑照相法测位移.该法实质上是借助数字图像处理技术,通过物体位移前后二个散斑场之间的相关性来进行位移测量方法的发展.文中给出了理论分析和实验系统.实验结果表明,该法有诸如准实时,大量程(毫米级),高精度和线性可靠等优点.     

时间序列散斑干涉场中相位函数的计算

散斑干涉或电子散斑干涉计量应用于连续运动或变形物体时,就会产生一个时变的散斑干涉场,通过摄像系统连续地采集这一时变散斑场,可获得一系列时间序列散斑干涉图,通过对序列散斑图上各点在时间轴上光强值的变化进行分析,提出了一种基于时间序列的分析方法,用以提取干涉场的相位值,进而获得物体全场变形信息。     

研测动态问题的旋转孔径散斑照相法Ⅱ:矩位、平四位、直三位孔径

本文提出了旋转孔径散斑照相法中三种新颖的基本孔径:矩位孔、平四位孔和直三位孔,进行了理论分析和实验证明。采用新孔径拍摄散斑照相,散斑信息利用率高,衍射晕能量分布合理,信噪比提高,因而散斑条纹清晰度得到改善,相应的实验误差减小。     

激光散斑技术与水工建筑物

散斑干涉计量术是七十年代发展起来的一门新兴技术.当用激光照射物体表面时,其漫反射光相互干涉形成了随机分布的斑点,该斑点称为“散斑”(speckle).散斑在六十年代初兴起的激光全息术中曾被作为相干噪声力求消除掉的.1968年。Burch和Tokavski指出[1]。用全息底片将物体表面的随机分布的散斑与物象一起拍摄下来而得到的散斑图。可用来获得物体表面变形(位移)的信息.Archbold, Burch和Ennos等人于1969年利用激光散斑法研究振动问题[2]。并且在1970年成功地进行物体变形的定量分析[3,4].1974年,Evans和Boone等人利用散斑相关原理测量断裂力…     

一种新的多通道散斑照相术及其应用

提出了一种新的多通道散斑照相术，通过旋转光楔实现多通道散斑图记录。该方法不仅能在一张记录介质上记录物体动有一些状态的多通道散斑图，且用全场滤波分析时，能方便地同时给出所有通道的物变形信息，得到清晰高衬比的干涉条纹图。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.