孔径径向扫描散斑照相法

本文提出了一种新的散斑照相法——孔径径向扫描散斑照相法,以及初步的实验结果.该方法的优点是能在一张散斑图上记录物体动态变形的全过程,在全场滤波分析时,能以等值条纹的形式给出任一瞬时物体在x轴、y轴和45°方向上的变形信息.     

旋转孔径白光散斑照相法的研究

本文报道利用旋转孔径法进行白光散斑照相,研测动态问题.其不仅具有旋转孔径激光散斑照相的优点,而且最突出的优点是能走出实验室,到现场进行动态测量研究.     

旋转孔径散斑照相法用于动态三维位移场的研制

采用两套旋转孔径散照相系统对动态三维位移场进行了研制。一次实验可把缓慢连续变形的动态三维移场的整个变化过程记录于两张散斑图上。对散斑图进行全场滤波可摄取所有各时刻的三个位移分量的信息。     

旋转孔径散斑照相法用于动态三维位移场的研测

采用两套旋转孔径散斑照相系统对动态三维位移场进行了研测。一次实验可把缓慢连续变形体的动态三维位移场的整个变化过程记录于两张散斑图上．对散斑图进行全场滤波可摄取所有各时刻的三个位移分量的信息。     

旋转孔径锥镜剪切散斑照相法

本文提出利用旋转孔径和锥镜进行剪切散斑照相,研测动态问题.该法能在一张散斑图上记录下物体动态变形的全过程,在全场滤波时可得到任意时刻的瞬态位移偏导数场.     

研测动态问题的旋转孔径散斑照相法Ⅰ:双孔、四扇孔

本文提出一种研测动态问题的实验新方法——旋转孔径散斑照相法。该法设备简单,利用一个旋转孔径装置,能在一张散斑图上记录下物体动态变形的全过程,然后在全场波滤分析时把各瞬时的信息分离出来,可得任意时刻的瞬态位移场。转孔法能应用于振动和非周期性动态问题,并以三个实验证实其可行性。实验结果表明,散斑条纹清晰可靠,定量分析与其它方法所得结果一致。     

旋转孔径散斑照相逐点分析法

本文提出了旋转孔径散斑照相的逐点分析法,其杨氏花纹一般来说不是等距离的直条纹,而是与位移的动态过程相联系的曲线条纹.本文解释了这种条纹的意义,给出了理论分析和实验证明.     

散斑剪切照像术中孔径函数的影响

本文对散斑剪切照像术中傅里叶滤波平面的光场分布进行了讨论,得出滤波系统频谱面上的光场分布是以孔径函数的自相关和互相关的边界为周界;对最佳拍摄孔径的设计作了探讨,认为采用适当分离的孔径可以研善波效果,提高条纹的质量。实验的验证结果与理论相吻合。     

非球面非零位环形子孔径拼接干涉检测技术

提出了一种新型的非零位环形子孔径拼接干涉检测技术(NASSI)用以检测深度非球面面形误差。该方法结合了传统非零位干涉检测法与环形子孔径拼接法,采用部分零位镜替代了标准环形子孔径拼接干涉仪中的透射球面镜,产生非球面波前用以匹配被测面不同子孔径区域。该非球面波前比球面波前更加接近被测面的名义面形,使所需的子孔径数目大大减少。一方面增大了环带宽度和重叠区,提高了拼接精度;另一方面减少了各种误差累积次数。同时,配合基于系统建模的理论波前方法分别校正各个子孔径的回程误差,进一步提高了检测精度。对非球面度为25μm的高次非球面的计算机仿真检测结果表明该方法具有很高的理论精度。针对口径101mm的抛物面进行了实验检测,多次实验结果均与ZygoR○VerifireTMAsphere干涉仪检测结果一致,峰谷(PV)值误差优于λ/20,均方根(RMS)值误差优于λ/100,表明了NASSI方法的高精度与高重复性。     

偏振孔径散斑照相法

本文讨论了偏振片在散斑照相多孔法中的作用,提出了一种新的散斑照相孔径——偏振四孔。     

Investigation on diffraction characteristics of continuous terahertz beam limited by hard-edge apertures

Hard-edge apertures are common devices in optical systems. The light beam would be diffracted while transmitting through an aperture. The diffraction characteristics of terahertz (THz) beam passing through two hard-edge apertures have been simulated based on the Fresnel diffraction integral function, and an approximate parallel beam has been obtained. The effect on the diffraction spot has been compared and analyzed by changing the aperture diameter and distance between the two apertures and the diffraction plane. Then the experimental results were presented, which basically accorded with the numerical results. It can be inferred that the diameter of THz beam diminishes and the divergence angle can be neglected after the restriction of two apertures. The method is preferably available in some experiments which require small beam diameter and divergence angle.     

基于离子注入隔离的微缩化发光二极管阵列性能

基于F离子注入隔离技术实现一种新型微缩化发光二极管(micromicro-LED)阵列器件,并系统研究注入能量及发光孔径对micro-LED阵列器光电性能的影响.研究结果表明:相比于F离子50 ke V单次注入器件, 50/100 ke V两次注入器件具有更好的光电性能,器件反向漏电降低8.4倍,光输出功率密度提升1.3倍.同时,在不同的发光孔径(6, 8, 10μm)条件下,器件反向漏电流均为3.4×10–8 A,但正向工作电压随孔径增大而减小,分别为3.3, 3.1, 2.9 V.此外,器件不同发光孔径的有效发光面积比(实际发光面积与器件面积之比)分别为85%, 87%, 92%.与传统台面刻蚀micro-LED器件相比,离子注入隔离技术实现的micro-LED器件具有较低反的向漏电流密度、较高的光输出密度及有效发光面积比.     

Theoretical Analyses on the Resolution of Collection Mode Scanning Near-Field Optical Microscopy

Numerical simulations have been carried out in the framework of waveguide theory to model collection mode scanning near-field optical microscopy (SNOM). The theoretical model includes the optical fiber end and describes the metal coated aperture on the probe tip. The developed formalism goes beyond the existing Bethe-Bouwkamp theories for electromagnetic transmission of subwavelength apertures. The finite coating and optical fiber end are now taken into account. The new features enable us to simulate the near-field probes that are widely used in the collection mode SNOM. The emphases of the numerical analyses have been mainly on the resolution mechanism of the microscopy. Influence on the resolution from important parameters of the probe tips, such as the size of the apertures and the probe-sample distance, is extensively studied. The resolution dependence has been analyzed in the light of the near-field coupling efficiency of the probe tip. An optimum tip size has been found which is balanced between the significant signal transmission and the resolution of the device.     

基于电磁拓扑的多腔体屏蔽效能快速算法

提出基于电磁拓扑理论计算开孔多腔体屏蔽效能的快速方法.首先给出双腔体等效电路和电磁拓扑信号流图,并推导孔缝节点处的散射矩阵,给出拓扑网络的散射矩阵方程和传输矩阵方程,获得双腔体的广义Baum-Liu-Tesche(BLT)方程.在此基础上研究了开孔三腔体,包括串型级联三腔体和串并型混合级联三腔体的广义BLT方程.对于串型级联三腔体,其电磁拓扑网络和广义BLT方程在双腔体基础上直接扩展即可获得.而对于串并型混合级联三腔体,通过将位于三腔体公共面上的孔缝等效为三端口网络节点,并根据三端口网络散射参数定义推导获得该节点的散射矩阵,最终得到串并型混合级联三腔体的广义BLT方程.本文方法对双腔体的计算结果与文献结果和实验结果相符合,对3组不同类型和尺寸开孔腔的屏蔽效能的计算结果与时域有限差分法计算结果符合较好.该算法不仅效率高,通过对所有计算结果和实验结果的误差统计分析,表明该算法具有较高的计算准确度.     

平面波照射下开孔矩形腔体的电磁耦合与屏蔽效能研究

基于Bethe小孔耦合理论和腔内电磁场的本征模展开, 建立了平面波照射下开孔矩形腔体电磁场分布的近似解析模型. 该模型物理意义清晰, 可以考虑开孔的形状、 尺寸、 个数及位置和入射波的传播与极化方向等参数的影响. 该模型的计算结果优于传统的等效电路方法, 与实验结果的一致性更好. 计算分析了相关因素对电磁屏蔽效能的影响规律, 所得结果对电磁屏蔽腔体的设计有指导意义.     

Modal Description of Wavefront Aberration in Non-circle Apertures

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｗｅｏｆｔｅｎｄｅｓｃｒｉｂｅｔｈｅｓｔａｔｉｃｏｒｄｙｎａｍｉｃｗａｖｅｆｒｏｎｔａｂｅｒｒａｔｉｏｎｓａｓｃｏｍｂｉｎａｔｉｏｎｏｆｄｉｆｆｅｒｅｎｔｍｏｄｅｓ,ｓｕｃｈａｓｐｉｓｔｏｎ ,ｔｉｌｔ,ｄｅｆｏｃｕｓ,ｃｏｍａ,ｓｐｈｅｒａｌａｎｄｓｏｏｎ .ＴｈｅｓｅｍｏｄｅｓａｒｅｓｉｍｉｌａｒａｓｓｏｍｅｌｏｗｅｒｏｒｄｅｒｓｏｆＺｅｒｎｉｋｅｐｏｌｙｎｏｍｉａｌｓ.ＴｈｅＺｅｒｎｉｋｅ ｐｏｌｙｎｏｍｉａｌｓａｒｅｎｏｒｍａｌｉｚｅｄｏｒｔｈｏｇｏｎａｌｉｎｃｉｒ…     

Effects of finite aperture on linewidth measurement using in- line Fraunhofer holography

Irradiance distributions in the reconstructed image plane are computed taking into consideration both finite and infinite hologram apertures. The influence on image quality of a finite aperture due to low-contrast response is discussed taking into account the average exposure level of holograms.     

Computer simulation of Fresnel diffraction from rectangular apertures and obstacles using the Fresnel integrals approach

In this paper, we describe a new computer simulation technique of generating Fresnel diffraction images from rectangular apertures of arbitrary dimensions by using Fresnel integrals instead of the more common fast Fourier transform methods. The simulation can be performed in almost any PC using the software MATLAB. Diffraction images can be generated for any wavelength of light and for any aperture–screen and aperture-source distances. Images for rectangular obstacles can also be simulated. Details of the algorithm and program are presented, as well as the interesting insights than can be gained from using the program. Finally, it is shown that the simulated images reduce to the simple Fraunhofer diffraction patterns for certain limiting situations.