强激光加载下锡材料微喷颗粒与气体混合回收实验研究及颗粒度分析

冲击波在金属材料自由面卸载时,材料表面会形成微颗粒向外喷射,这是材料表面一种特殊的破坏形态.在内爆压缩和高压工程领域的相关物理过程中,微喷射颗粒是引起界面混合现象的重要来源,会直接影响后期的混合状态和压缩过程.而微颗粒的尺寸、形态、运动速度等是开展微喷混合过程理论和数值模拟研究的重要参数.由于实验中动态诊断的难度较大,目前已获取的微喷颗粒尺寸及分布数据十分有限.基于神光Ⅲ原型激光装置,本文设计并开展了强激光驱动冲击加载,锡材料微喷颗粒经过气体区混合后,低密度泡沫材料对微颗粒进行回收分析的实验研究.通过对微喷颗粒回收样品的X光电子计算机断层扫描分析和图像重建,获得了两个典型加载压强条件下与气体混合后微喷颗粒的三维图像,通过与真空实验条件下回收微喷颗粒图像的对比分析,对混合后的微喷颗粒分布形态有了初步的认识;测量统计了回收颗粒尺寸与数目,并通过分析,给出了微喷颗粒尺寸的双指数分布规律.     

激光加载下金属锡材料微喷颗粒与低密度泡沫混合实验研究

金属材料的微喷是冲击加载下金属表面发生的一种动态破碎现象,微喷研究在很多领域都具有重要意义,包括惯性约束聚变(ICF)和烟火制造等.由于激光实验特有的优势,近几年国内外开展了很多利用强激光驱动冲击加载研究材料微喷过程的实验.利用泡沫材料对微喷颗粒进行静态软回收虽然可以获得颗粒的形态分布、颗粒尺寸及颗粒质量等定量结果,但并不能反演微喷颗粒从进入泡沫到停滞过程中的动态混合过程.为此,在神光Ⅱ升级装置上利用皮秒脉冲激光照射金丝产生高能X射线,实现了对锡微喷颗粒与低密度泡沫混合过程的高时间分辨和高空间分辨背光照相.背光图像面密度结果证实微喷颗粒在泡沫中并没有发生二次破碎.静态回收结果表明,在锡材料与泡沫紧贴放置的情况下,微喷颗粒在泡沫中的穿透深度随着加载压强升高呈现先增大后减小的规律,与非紧贴放置的实验结果有明显的差别.     

强激光加载下金属材料微喷诊断实验研究进展

强激光加载下金属材料产生的微喷射现象及其内在的机理分析是冲击压缩科学与工程领域研究的前沿问题,相关研究对于认识材料在极端载荷条件下的动力学行为具有重要意义。近年来国内外科学家们基于各大激光装置开展了大量微喷射诊断实验研究,在喷射物性质、金属界面不稳定性增长以及微喷混合问题等方面取得了一系列重要进展。通过回顾微喷静态和动态诊断实验的研究历程,对微喷诊断实验研究方法的重要应用作了详细介绍,同时对微喷产生的主要作用机制、影响因素以及微喷混合等问题进行回顾、梳理和总结。根据当前国内外微喷诊断实验发展趋势,归纳总结目前微喷诊断实验研究结果中仍存在的不足,并对微喷射实验研究未来发展方向进行展望。     

微喷颗粒与气体混合过程的数值模拟研究

冲击波作用下金属与气体界面将发生微喷混合现象,即金属表面产生的微喷射物质在气体中的输运过程.提出采用散体颗粒分布代替微喷初始状态,基于气体-颗粒两相流模型对微喷混合现象进行了模拟研究.数值模拟给出了微喷混合的动力学演化过程,分析了初始气体压力和颗粒尺寸因素对混合层的影响规律;在数值模拟中发现了微喷颗粒的气动破碎现象,这可导致颗粒尺度明显减小,成为影响微喷混合演化性质的重要物理因素.本文模拟结果与相关实验结果取得一致,初步表明,气粒两相流模型是模拟微喷混合过程的一种有效方法.     

激光驱动单颗粒与气体混合的实验研究

利用激光驱动技术对微小颗粒进行加载,能够获得较高的颗粒速度,可能成为高速气相流场中气固两相流研究的有效实验手段。利用激光驱动微小金属颗粒模拟高速运动的物体,采用驱动靶优化设计、激光光束调节等方法控制颗粒加速过程,并利用高时空分辨率、高精度瞬态实验诊断技术获取高速颗粒的瞬态物理图像。研究表明,该方法能够有效地发射金属颗粒并获取清晰的高速颗粒物理图像,建立的实验、诊断手段可为进一步开展微喷混合、超燃发动机混合、颗粒高速碰撞以及工业粉尘爆炸等相关研究奠定基础。     

用高速摄影和脉冲同轴全息照相联合诊断微射流

 针对强冲击载荷下金属材料的微物质喷射中微射流的实验研究,提出了高速摄影与脉冲同轴全息照相联合诊断的测试方案,并组建了由微射流产生装置、高速摄影系统、脉冲同轴全息照相系统和高精度时序控制同步系统组成的测试系统。动态实验结果表明,高速摄影和脉冲同轴全息照相联合诊断微射流能在一次实验获得微射流的发展图像和微射流头部低动态模糊图像。     

冲击波作用下微米尺度金属颗粒群的动力学行为

基于平面化爆驱动飞片高压加载技术和激光测速技术,研究了冲击波加载不同粒径锡颗粒群的微喷射行为以及在空气中的减速规律.实验结果表明,锡颗粒的最快喷射速度随粒径增大而显著增大.通过对微喷射形成过程的三维光滑粒子流体动力学方法数值模拟发现,大粒径锡颗粒之间存在较大的空隙结构,冲击波与空隙结构的相互作用诱导产生高速汇聚射流,空隙结构越大对应的喷射速度也越高.此外,通过研究不同粒径颗粒在复杂流场中的减速规律,进一步深化了对微喷射破碎后的颗粒尺度状态以及混合输运特性的认识.研究结果对于预测和分析冲击波加载微米颗粒群的微喷混合特性具有一定价值.     

微喷加载装置中爆轰波阵面的测量

 根据金属材料微喷射激光全息诊断技术的要求,提出了一种测量微喷加载装置中爆轰波波前形状的实验方法,利用快响应光纤探针阵列来测量传爆药柱加载飞片的冲击波波前形状,并根据所得的实验数据用计算机模拟出爆轰波波前的形状,给出冲击波到达飞片上表面的时间分散性曲线。     

冲击载荷下金属材料的微结构-加载特性-层裂响应关系概述

鉴于冲击载荷下金属材料的变形损伤具有微结构和加载特征的依赖性,对国内外有关层裂现象的研究进展进行了简要梳理与总结。概述了晶粒尺寸、织构、晶界类型、相界和元素偏析带等结构对金属材料变形损伤的影响,重点阐述了脉冲宽度、应变率和峰值应力等加载特征对金属材料层裂强度的耦合作用,为了解冲击载荷下金属材料微结构、加载特征与变形损伤行为之间的关系提供参考。     

强激光驱动爆炸与冲击效应

随着高功率密度激光技术的快速发展,强激光驱动的爆炸与冲击效应逐渐引起国内外学者的广泛关注。对强激光诱导爆炸与冲击效应研究进展进行了综述,包括强激光诱导爆炸载荷特征与相似律,强激光对材料表面冲击强化处理,强激光冲击诱导材料相变动力学行为,以及利用强激光驱动微弹道冲击等方面的研究进展,并指出了强激光诱导爆炸与冲击效应研究的发展趋势和未来需要解决的关键科学问题。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.