Determination of the reaction rate constant and activation energy for pressure-induced 2+2 cycloaddition of the C60 fullerene

The kinetics of fullerene solid-phase dimerization proceeding through the 2+2 cycloaddition of C₆₀ at a pressure of 1.5 GPa is investigated by vibrational spectroscopy in the temperature range 373–473 K. Kinetic curves for the formation of (C₆₀)₂ dimers are obtained using the analytical band at 796 cm^?1 in the IR spectra of the (C₆₀)₂ dimer molecule. Under the assumption that the pressure-induced dimerization of C₆₀ is an irreversible second-order reaction, the reaction rate constants are determined at different temperatures. The activation energy and the preexponential factor are found to be equal to 134±6 kJ/mol and (1.74±0.24)×10¹⁴ s^?1, respectively.     

原子无序起伏对C60的影响

用高斯型分布的独立无规参数模拟起因于热涨落等原因的格点原子无序起伏，并用对大量彼此独立的原子无序起伏方式采样取平均的方法，研究了原子无序起伏对光激发和电子转移C₆₀的键长和格点电子密度分布的影响．得到了C₆₀中键长和格点电子密度相对于原子无序起伏强度、额外电荷数目和种类的分布曲线．发现：1）在C₆₀的长、短键之差等于0.0044nm，格点原子无序起伏强度为0—0.01nm时，C₆₀中的二聚化结构仍然存在．2）在格点原子 关键词：     

Line strength and collisional broadening coefficients of H2O at 2.7 μm for natural gas quality assurance applications

We employed tunable diode laser absorption spectroscopy to measure the line strength, the methane (CH₄), ethane (C₂H₆) and the propane (C₃H₈) broadening coefficients for the 523–422 H₂O transition at 3619.61 cm^?1. Water amount fractions generated by a stable and accurate humidity transfer standard, traceable to the SI units via the German national humidity standard, were used to calibrate the spectroscopic line strength measurements. We focus on the traceability of the measured line data to the SI and on uncertainty assessments following the guidelines of the Guide to the Expression of Uncertainty in Measurement. We determined the line strength to be (8.42 ± 0.07)×10^?20 cm^?1/(cm^?2 molecule) corresponding to a relative uncertainty of ±0.8%. To the best of our knowledge, we report the first methane, ethane and propane broadening coefficients of (8.037 ± 0.056)×10^?5 cm^?1/hPa, (9.077 ± 0.064)×10^?5 cm^?1/hPa and (10.469 ± 0.073)×10^?5 cm^?1/hPa for the 523–422 H₂O transition at 3619.61 cm^?1, respectively. The relative combined uncertainties of the stated CH₄, C₂H₆ and C₃H₈ broadening coefficients are in the ±0.7% range.     

Physical and mechanical properties of C60 under high pressures and high temperatures

The physical and mechanical properties of a C₆₀ fullerene sample have been investigated under high pressure–high temperature conditions using a designer Diamond Anvil Cell. Electrical resistance measurements show evidence of C₆₀ cage collapse at 20 GPa, which leads to the formation of an insulating phase at higher pressure. Energy dispersive X-ray diffraction (EDXD) data indicated that the characteristic fcc reflections gradually decrease in intensity and eventually disappear above 28 GPa. A C₆₀ sample was laser-heated at a pressure of 35 GPa to a temperature of 1910±100 K and, subsequently, decompressed to ambient conditions. The photoluminescence spectra and the Raman spectrum of the pressure–temperature-treated sample were measured at a low temperature of 80 K. Raman peak at 1322.3 cm^?1 with full-width half-maximum of 2.9 cm^?1 was observed from the sample, which is attributed to the hexagonal diamond phase in the sample. The room temperature photoluminescence spectra showed a symmetric emission band centered in the red spectral range with a peak at 690 nm. The structural analysis of the pressure–temperature-processed C₆₀ sample using EDXD method showed strong internal structure orientation and a phase close to hexagonal diamond. Mechanical properties such as hardness and Young’s modulus were measured by nanoindentation technique and the values were found to be 90±7 and 1215±50 GPa, respectively and these values are characteristic of sp³-bonded carbon materials.     

Investigation of the kinetics of OH∗ and CH∗ chemiluminescence in hydrocarbon oxidation behind reflected shock waves

The temporal variation of chemiluminescence emission from OH^?(A² Σ ⁺) and CH^?(A² Δ) in reacting Ar-diluted H₂/O₂/CH₄, C₂H₂/O₂ and C₂H₂/N₂O mixtures was studied in a shock tube for a wide temperature range at atmospheric pressures and various equivalence ratios. Time-resolved emission measurements were used to evaluate the relative importance of different reaction pathways. The main formation channel for OH^? in hydrocarbon combustion was studied with CH₄ as benchmark fuel. Three reaction pathways leading to CH^? were studied with C₂H₂ as fuel. Based on well-validated ground-state chemistry models from literature, sub-mechanisms for OH^? and CH^? were developed. For the main OH^?-forming reaction CH+O₂=OH^?+CO, a rate coefficient of k ₂=(8.0±2.6)×10¹⁰ cm³?mol^?1?s^?1 was determined. For CH^? formation, best agreement was achieved when incorporating reactions C₂+OH=CH^?+CO (k ₅=2.0×10¹⁴ cm³?mol^?1?s^?1) and C₂H+O=CH^?+CO (k ₆=3.6×10¹²exp(?10.9 kJ?mol^?1/RT) cm³?mol^?1?s^?1) and neglecting the C₂H+O₂=CH^?+CO₂ reaction.     

Analysis of the parameters of a smeared orientational transition at 250–260 K in C60 crystals

The orientational structural transformation in C₆₀ crystals at temperatures of 250–260 K is investigated within the theory of smeared first-order phase transitions. The parameters of this transformation are analyzed using the experimental temperature dependences of the heat capacity and the inelastic (ferroelastic) strain rate in the phase transition range. The elementary volume of the transformation (11–83 nm³) in a correlated motion of C₆₀ molecules and the spontaneous shear strain of the lattice (2.4×10^?2) upon its transformation from the simple cubic to the face-centered cubic structure are determined.     

High resolution measurements of the line positions and strengths of the 2ν2 band of H2CO

Spectra of the 2ν₂ band of formaldehyde have been obtained with high resolution (0.035 cm^?1). Measurements were made with path lengths of 8, 16, and 24 m and at sample pressures from 0.1 to 0.3 mm Hg at room temperature (～296°K). From these data, the following constants were determined for the 2ν₂ band in wavenumber units: v₀=3471.718±0.004,A=9.3958±030013,B=1.28100±0.00024,C=1.11662±0.00024, Tbbb=-12.8±0.5×10^-6,Taabb=60±5×10^-6. The line strengths were also obtained from the data. The strengths were analyzed to determine the band strength and the rotational factors. At 296°K, the strength of the 2ν₂ band was found to be 15.5 ± 0.9 cm^?1/(cm·atm).     

EPR, Optical Absorption and Superposition Model Study of Fe3+-Doped Ammonium Dihydrogen Phosphate Single Crystals

X-band electron paramagnetic resonance (EPR) studies are carried out on Fe³⁺ ions doped in ammonium dihydrogen phosphate (ADP) single crystals at room temperature. The crystal field and spin Hamiltonian parameters are evaluated from the resonance lines obtained at different angular rotations. The obtained values of spin Hamiltonian and zero-field parameters of the Fe³⁺ ion in ADP are: g = 1.994 ± 0.002, |D| = (220 ± 5) × 10^?4 cm^?1 and a = (640 ± 5) × 10^?4 cm^?1. On the basis of EPR data, the site symmetry of the Fe³⁺ ion in the crystal is discussed. The Fe³⁺ ion enters the lattice substitutionally replacing the NH₄ ⁺ sites. The optical absorption of the crystal is also studied at room temperature in the wavelength range of 195–925 nm. The energy values of different orbital levels are calculated. The observed bands are assigned as transitions from the ⁶ A _1g (S) ground state to various excited quartet levels of the Fe³⁺ ion in a cubic crystalline field. From the observed band positions, Racah interelectronic repulsion parameters (B and C), cubic crystal field splitting parameter (D _q ) and Trees correction are calculated. There values are: B = 970, C = 1,923, D _q  = 1,380 cm^?1 and α = 90 cm^?1, respectively. On the basis of EPR and optical data, the nature of bonding in the crystal is discussed. The zero-field splitting (ZFS) parameters are also determined theoretically using B _kq parameters estimated from the superposition model. The values of ZFS parameters thus obtained are |D| = (213 ± 5) × 10^?4 cm^?1 and |E| = (21 ± 5) × 10^?4 cm^?1.     

Simulation of the thermal fragmentation of fullerene C60

Defect formation and annealing processes in fullerene C₆₀ at T = (4000–6000) K are studied using molecular dynamics with a tight-binding potential. The cluster lifetime until fragmentation, which proceeds, as a rule, through the loss of a C₂ dimer, has been found as a function of temperature. The activation energy and the frequency factor in the Arrhenius equation for the fragmentation rate have been found to be E _a = (9.2 ± 0.4) eV and A = (8 ± 1) × 10¹⁹s^?1. It is shown that fragmentation can occur already after the C₆₀ cluster loses its spherical shape. This fact must be taken into account in theoretical calculations of E _a.     

Phase transition and freezing of ionic disorder in CsNO2 and TINO2 crystals2

The heat capacities of CsNO₂ and TlNO₂ have been measured in the temperature region between 13 and 350 K. The phase transitions of CsNO₂ and TlNO₂ were found at (209.16 ± 0.10)K and (282.4 ± 0.1)K. The enthalpy and entropy of the phase transition were (3.45 ± 0.20) kJ mol^?1 and (17.2 ± 1.0) JK^?1 mol^?1 for the former, and (6.44 ± 0.31) kJ mol^?1 and (23.8 ± 1.1) JK^?1 mol^?1 for the latter. The glass transitions were found around 42 K in CsNO₂ and around 60 K for TlNO₂, respectively. The corresponding dielectric relaxations were observed between 58 and 130 K for CsNO₂ in the frequency range between 10² and 10⁵ Hz and between 80 and 180 K for TlNO₂ in the frequency range between 2 × 10² and 10⁵ Hz. The calorimetric and dielectric relaxation times yielded a straight line in the Arrhenius plot over a wide time scale ranging from 10^?6 to 10⁵ sec. The slope gave the activation enthalpy of 13.8 kJ mol^?1 and 19.5 kJ mol^?1 for CsNO₂ and TlNO₂, respectively. The transition entropy supplemented by a residual entropy R ln 3 for CsNO₂ and R ln 2 for TlNO₂ gave (26.3 ± 1.0) JK^?1 mol^?1 and (29.6 ± 1.1) JK^?1 mol^?1 for the orientational entropy of the NO₂^? ion in the high-temperature phase. Based on the packing and symmetry considerations, these entropies were interpreted by the model which included two different sets of orientations of the NO₂^? ions parallel to [110] and [111] in the CsCl type unit cell. The existence of the different sets of orientation was proved by the doublet (Δv ~ 10 cm^?1) of the Raman spectrum of the bending mode of the NO₂^? ion in the cubic phase of the CsNO₂ crystal. The band narrowed to an ordinary singlet with increasing temperature. This observation was accounted for as the motional narrowing in which the NO₂^? ion felt an averaged field of the two different sets owing to the increased rate of jumping as the temperature increased.     

Gas‐phase reactions of Cl atoms with hydrochloroethers: relative rate constants and their correlation with substituents' electronegativities

Rate constants for the reactions of Cl atoms with CH₃OCHCl₂ and CH₃OCH₂CH₂Cl were determined at (296 ± 2) K and atmospheric pressure using synthetic air as bath gas. Decay rates of these organic compounds were measured relative to the following reference compounds: CH₂ClCH₂Cl and n‐C₅H₁₂. Using rate constants of 1.33 × 10^?12 and 2.52 × 10^?10 cm³ molecule^?1 sec^?1 for the reaction of Cl atoms with CH₂ClCH₂Cl and n‐C₅H₁₂, respectively, the following rate coefficients were derived: k(Cl + CH₃OCHCl₂) = (1.05 ± 0.11) × 10^?12 and k(Cl + CH₃OCH₂CH₂Cl) = (1.14 ± 0.10) × 10^?10, in units of cm³ molecule^?1 s^?1. The rate constants obtained were compared with previous literature data and a correlation was found between the rate coefficients of some CH₃OCHR¹R² + Cl reactions and ΔElectronegativity of ? CHR¹R². Copyright © 2008 John Wiley & Sons, Ltd.     

Single-crystal elasticity of the rhodochrosite at high pressure by Brillouin scattering spectroscopy

ABSTRACT

The sound velocity properties of single-crystal rhodochrosite (MnCO₃) were determined up to 9.7?GPa at ambient temperature by Brillouin scattering spectroscopy. Six elastic constants were calculated by a genetic algorithm method using the Christoffel's equations at each pressure. The elastic constants increased linearly as a function of pressure and its pressure derivatives ?Cij/?P for C₁₁, C₃₃, C₄₄, C₁₂, C₁₃, C₁₄ were 5.86 (±0.36), 3.82 (±0.44), 2.06 (±0.39), 5.07 (±0.27), 5.34 (±0.44), 1.52 (±0.24), respectively. Based on the derived elastic constants of rhodochrosite, the aggregate adiabatic bulk and shear moduli (K_s and G) were calculated using the Voigt-Reuss-Hill averages and the linear fitting coefficients (?K_s/?P)_T and (?G/?P)_T were 5.05(±0.26) and 0.73(±0.05), respectively. The aggregate V_p of rhodochrosite increased clearly as a function of pressure and its pressure derivative ?V_p/?P was 7.99(±0.53)?×?10^?2?km/(s?GPa), while the aggregate V_s increased slowly and ?V_s/?P was only 1.19(±0.12)?×?10^?2?km/(s?GPa). The anisotropy factor for As of rhodochrosite increased from ～40% at 0.8?GPa to ～48% at 9.7?GPa, while A_p decreased from ～19% to ～16% at the corresponding pressure.     

Crystal structure and thermodynamic properties of phase change material bis(1-dodecylammonium) tetrachlorochromate (C12H25NH3)2CdCl4(s)

A novel complex bis(1-dodecylammonium) tetrachlorochromate (C₁₂H₂₅NH₃)₂CdCl₄(s) (abbreviated as C₁₂Cd(s)) was synthesized by liquid phase reaction. Crystal structure and composition of the complex were determined by X-ray crystallography, chemical analysis, and elemental analysis. It is triclinic, the space group is P?1 and Z = 2. Lattice potential energy (LPE) of the complex was calculated to be kJ·mol^?1 from crystallographic data. Low-temperature heat capacities were measured by a precise automatic adiabatic calorimeter over the temperature range from 78 to 370 K. The temperature, molar enthalpy, and entropy of the phase transition of the complex were determined to be 331.88 ± 0.02 K, 55.79 ± 0.46 kJ·mol^?1, and 168.10 ± 1.38 J·K^?1·mol^?1, respectively. Two polynomial equations of the heat capacities as a function of temperature were fitted by least-square method. Smoothed heat capacities and thermodynamic functions of the complex were calculated.     

Vibronic properties of the F+ centre in strontium oxide

The shape and moments of the F⁺ absorption band in SrO have been measured between 4.2K and 300K. Analysis of the moments gives the effective frequency of the vibrational modes interacting with the centre as $\text{h}\text{?}\text{ω = 236 ± 20 cm}{}^{-1}$, and the Huang-Rhys factors for cubic and non-cubic modes as S_C = 3 ± 1 and S_NC = 4 ± 1 respectively.     

A new molecular C60 complex with bis(methylenedithio)tetrathiafulvalene (BMDT-TTF): Synthesis, crystal structure, and properties

A new molecular C₆₀ complex of the composition (BMDT-TTF) · C₆₀ · 2CS₂ (I) with the bis(methylenedithio)tetrathiafulvalene (BMDT-TTF) organic donor is synthesized. The molecular and crystal structures of this complex are determined by x-ray diffraction. The (BMDT-TTF) · C₆₀ · 2CS₂ (I) compound crystallizes in a monoclinic crystal system. The main crystal data are as follows: a=13.550(5) Å, b=9.964(7) Å, c=17.125(8) Å, β=99.52(4)°, V=2280(2) ų, M=1229.45, and space group P2₁/m. Crystals of I have a layered structure: layers consisting of C₆₀ molecules alternate with layers composed of BMDT-TTF and CS₂ molecules. It is found that, in complex I, the donor and C₆₀ molecules are linked through the shortest contacts, which leads to a change in the molecular geometry of BMDT-TTF. The donor molecules in a crystal layer are characterized by the shortest S...S contacts. The IR data indicate the electroneutrality of the fullerene molecule. The electrical conductivity of (BMDT-TTF) · C₆₀ · 2CS₂ single crystals is measured using the four-point probe method at room temperature: σ_RT=2×10^?5 Ω^?1 cm^?1.     

EPR and Optical Absorption Study of Cr3+-Doped Dipotassium Tetrachloropalladate

X-band electron paramagnetic resonance (EPR) study of Cr³⁺-doped dipotassium tetrachloropalladate single crystal is done at liquid nitrogen temperature. EPR spectrum shows two sites. The spin-Hamiltonian parameters have been evaluated by employing hyperfine resonance lines observed in EPR spectra for different orientations of crystal in externally applied magnetic field. The values of spin-Hamiltonian and zero-field splitting (ZFS) parameters of Cr³⁺ ion-doped DTP for site I are: g _x  = 2.096 ± 0.002, g _y  = 2.167 ± 0.002, g _z  = 2.220 ± 0.002, D = (89 ± 2) × 10^?4 cm^?1, E = (16 ± 2) × 10^?4 cm^?1. EPR study indicates that Cr³⁺ ion enters the host lattice substitutionally replacing K⁺ ion and local site symmetry reduces to orthorhombic. Optical absorption spectra are recorded at room temperature. From the optical absorption study, the Racah parameters (B = 521 cm^?1, C = 2,861 cm^?1), cubic crystal field splitting parameter (Dq = 1,851 cm^?1) and nephelauxetic parameters (h = 2.06, k = 0.21) are determined. These parameters together with EPR data are used to discuss the nature of bonding in the crystal.     

Vibrational Spectroscopic and Theoretical Studies of Urea Derivatives with Biochemical Interest: N,N′-Dimethylurea,N,N,N′,N′-Tetramethylurea,and N,N′-Dimethylpropyleneurea

Abstract

Mid-infrared, far-infrared, and Raman vibrational spectroscopic studies were combined with density functional theory (DFT) calculations and normal coordinate force field analyses for N,N′-dimethylurea (DMU), N,N,N′,N′-tetramethylurea (TMU), and N,N′-dimethylpropyleneurea (DMPU: IUPAC name 1,3-dimethyltetrahydropyrimidin-2(1H)-one). The equilibrium molecular geometry of DMU (all three conformers), TMU, and DMPU and the frequencies, intensities, and depolarization ratios of their fundamental infrared (IR) and Raman vibrational transitions were obtained by DFT calculations. The vibrational spectra were fully analyzed by normal coordinate methods as well. A starting force field for DMPU was obtained by adapting corresponding force constants for DMU and TMU, resulting after refinements in the stretching force constants C=O (7.69, 7.30, 7.68 N·cm^?1), C–N (5.16, 5.55, 5.05 N·cm^?1), and C-Me (5.93, 4.00, 4.22 N·cm^?1) for DMU, TMU, and DMPU, respectively. The dominating conformer of liquid DMU was identified as trans-trans, strong intermolecular hydrogen bonding was verified in solid DMU, and weak dipole–dipole association was found in liquid TMU and in DMPU. Special attention was paid to analyzing the methyl group frequencies, which revealed deviations from local C_3v symmetry. A linear correlation was found between the CH stretching force constants and the inverse of the CH bond lengths (1/r ²). The averaged NH stretching frequencies of gaseous, dissolved, and solid urea and of DMU, with variations for hydrogen bonding of different strength, are linearly correlated to the NH stretching force constants. Characteristic skeletal vibrations were assigned for a broad variety of urea derivatives and also for pyrimidine derivatives, which all contain the N₂C=O entity. The very strong IR bands of C=O stretching (1,676 ± 40 cm^?1) and asymmetric CN₂ stretching (1,478 ± 60 cm^?1), and the very intense Raman feature of symmetric CN₂ stretching or ring breathing (757 ± 80 cm^?1), can be recognized as fingerprint bands also for the pyrimidine derivatives cytosine, thymine, and uracil, which all are nucleobases in DNA and RNA nucleotides.     

Temperature dependence of the energy gap of MgxZn1−xTe semiconductors alloys

Wavelength-modulation spectroscopy is used to obtain the temperature dependence of the near band gap reflectivity spectrum E_o of Mg_xZn_1?xTe ternary semiconducting alloys. Results are given in the range 80–100 K for the cubic materials: 0〈x〈0.5. The analysis of the line shapes as a function of x and T confirms the hypothesis of an exciton bound to the complex defect associated with zinc vacancy, as ZnTe. The E_o(x) curve is parabolic. The bowing parameter is C=0.45 ± 0.1 eV at 80 K, C=0.6 ± 0.1 eV at 300 K. Within experimental scattering the temperature coefficient dE₀dT is nearly constant with x:-4.5±0.3 × 10^?4eVK^?1. This data is smaller than the value calculated in the literature for ZnTe from pseudo potential method.     

Phonon dispersion in solid DC1 I

Phonon dispersion curves in DC1 at 109 K have been determined. Values of the zero-sound elastic constants C₁₁ = (6.29±0.23), C₁₂ = (3.95±0.22) and C₄₄ = (2.47±0.12) × 10¹⁰ dyn cm^? re obtained from fitting the data to a harmonic Born-von-Kármán model. This implies a deviation from the Cauchy relation δ = ?0.38±0.08.     

New pyrazolino and pyrrolidino[60]fullerenes: the introduction of the hydrazone moiety for the formation of metal complexes

The [3 + 2] cycloaddition reaction of C₆₀ with pyridine‐derived hydrazones (acting as dipolar reagents) was successfully conducted resulting in fullerene derivatives 5a , 5b . The compounds were characterized by means of NMR, UV–Vis spectroscopy, and X‐ray crystallography. The electrochemical behavior was also investigated. The fulleropyrazoline 5a exhibits anodically shifted reduction potentials of about 100 mV when compared with those for C₆₀, whereas 5b exhibits cathodic shifts relative to pristine C₆₀. The complexation reaction of 5b with metallic ions (Zn²⁺, Cd²⁺, and Fe²⁺) was achieved. Job and Benesi–Hildebrand analysis confirmed the formation of complexes with a molar ratio of 1:1 and binding constants between 2.26 × 10⁵ and 1.59 × 10⁵ M^?1. Electrochemistry of these complexes showed a marked influence of the metal ion on the reduction potentials. Copyright © 2016 John Wiley & Sons, Ltd.