1018 nm短波长掺镱光纤激光高功率自组织相干合成

搭建了两台高功率、低量子损耗的1018 nm短波长掺镱光纤激光器,进行了全光纤结构下两路光纤激光器的相干合成实验。获得了功率为55 W、合成效率为90.2%的相干输出,这是当前严格单模1018 nm光纤激光器的最高功率水平。同时,验证了Michelson腔自组织相干合成技术能够实现光纤激光器的高功率单模输出。     

两光纤激光器相干合成的实验研究

利用迈氏腔技术,进行了光子晶体光纤(PCF)激光器相干合成的实验研究,实现了两光子晶体光纤激光器的相位锁定,获得了功率为47W的相干输出.解释了在迈氏腔的两个输出光路上分别实现相干相长和相干相消的物理机理.实验结果表明,合成激光光谱较单台PCF激光器的激光光谱有显著的改善,波长带宽小于5nm. 关键词： 光子晶体光纤 相位锁定 迈氏腔 光纤激光器     

两光子晶体光纤激光器相干锁定的实验研究

利用自成像腔技术进行光子晶体光纤(PCF)激光器光束相干合成的实验研究,实现了两光子晶体光纤激光器的相位锁定.在不使用滤波器的情况下,实验仍能观测到清晰的下涉图样,且在高功率输出状态以及环境噪声情况下干涉图样仍可保持稳定,表明具有单模大模场特性的光子晶体光纤在实现光束相干合成方面比传统的双包层光纤(DCF)有明显的优越性.实验还表明耦合输出镜的反射率对相干输出功率有一定影响,当反射镜的反射率分别为5%,10%和15%时,两台激光器相干输出斜率效率分别为63.8%,61.6%和60.2%.在抽运功率为150 W和耦合输出镜的反射率为5%时,获得95.8 W的最大相干功率输出,相干功率合成效率为90.2%.实验中无任何热光效应产生,有望利用该方法获得更高的相干输出功率.     

全光纤光反馈环形腔结构多路激光被动相干合成

提出了基于全光纤光反馈环形腔结构的多路光纤激光相干合成方案,实现了多路激光的被动相干合成。全光纤结构避免了传统孔径拼接输出结构的旁斑能量耗散问题,保证了合成光束的光束质量。开展了实验研究,实现了4路光纤激光的相干锁相输出,获得时域、空域特性均十分稳定的合成光束,合成效率为96.1%,取得较好的合成效果。     

全光纤激光相干合成光谱响应特性研究

基于N-腔镜谐振腔理论对全光纤激光相干合成进行了理论分析，数值模拟了迈克尔逊型相干合成激光器的光谱特性，对两个光纤Bragg光栅的中心波长差和两路光的光程差对合成光谱特性的影响给出了理论解释.用啁啾光纤光栅取代其中一个光纤Bragg光栅，使激光相干合成的带宽由0.3 nm拓展到1.0 nm.     

脉冲光纤激光被动相干偏振合成研究

提出了脉冲激光被动相干偏振合成方案．利用光反馈环形腔结构实现多路激光的自组织被动锁相,利用级联偏振合柬的结构实现多路激光偏振合成,实现多路相干光束同轴输出．开展了4路脉冲激光相干偏振合成实验研究,获得了91．9％的合成效率,可获得时域、空域特性均十分稳定的合成脉冲激光．该方案为获得高功率脉冲光纤激光提供了一条可行的技术途径．     

子激光器功率差对光纤激光器相干组束的影响

设计了由两支光纤激光器通过耦合器组成的迈克尔逊腔型光纤激光器阵列,实现了相干合成输出,相干合成功率与完全相干合成的理论值偏差约9％。研究了子激光器功率差对低损耗端口相干合成特性的影响。结果表明：当子光纤激光器功率差减小时,耦合效率增大,理论与实验偏差减小,泵浦效率增大,输出功率增大,光谱中心波长基本不变;子激光器功率越大,子激光器功率差对以上物理量的影响越小。     

两路关联光纤激光器互注入锁相实验

基于角锥互注入锁相相干合成方案,利用光纤Bragg光栅（R=85％@1064nm）作为两路光纤激光器的共用腔镜,实现了两路光纤激光器相关联,进一步提高了激光的互注入能量。采用外腔结构,较容易实现了两路光纤激光器的能量互注入锁相。在实验上观察到了远场清晰稳定的干涉条纹（可见度超过0．8）,获得了功率合成效率约为80％的线偏振相干激光输出。     

两路双包层光纤激光器互注入锁相实验研究

提出了一种利用45°半透半反分束镜和角锥反射器实现两路光纤激光器的能量相互注入,从而获得相干合成激光输出的新方法,分析了其锁相原理.在实验上成功实现了两路独立振荡双包层光纤激光器的互注入锁相输出,在远场观察到了清晰稳定的干涉条纹（可见度约0.57）,获得了超过10W的相干合成激光输出,功率合成效率约为76%.实验表明,这种互注入锁相方法可以在更高功率条件下运行,是光纤激光相干合成领域一种有前途的新技术. 关键词： 光纤激光器 相干合成 互注入锁相     

基于自适应桶中功率评价函数的光纤放大器相干合成实验研究

光纤激光光束合成技术被公认为是实现高亮度、高光束质量激光束的优秀方法, 而激光阵列间的倾斜像差是影响合成效果的重要因素. 针对当前光束合成中存在的倾斜校正量受限问题, 提出了基于自适应桶中功率(PIB)评价函数的倾斜控制策略. 搭建了两路2 W光纤放大器的相干合成实验平台, 利用自制的压电环光纤相位调制器和自适应光纤准直器分别实现锁相和倾斜像差校正, 验证了基于自适应PIB的倾斜控制策略的可行性, 并实现了相干合成. 关键词： 光纤激光阵列 倾斜控制 自适应桶中功率 相干合成     

二维固体激光阵列逆达曼光栅相干合束技术模拟研究

采用逆达曼光栅将二维锁相相干的激光阵列进行相干合束并进行孔径装填是获得远场单一主瓣大功率高光束质量激光输出的一种有效技术方案,将其应用于大尺寸5×5固体激光相干阵列相干合束中,并进行了固体激光阵列合束孔径装填的理论分析和原理性验证实验,测量了系统的实际合束效率,同时进行了后焦面逆达曼光栅的加工和放置误差对合束效率影响的详细分析。实验结果表明,逆达曼光栅用于固体激光阵列相干合束是一种有效的技术方案,且可以通过调节光栅周期和傅里叶透镜焦距来适应系统对激光阵列占空比的要求。这对于开发基于逆达曼光栅相干合束的高功率高光质量的全固态激光系统具有重要的意义。     

迈克尔孙干涉仪组合实验的改进与设计

采用HNL-55700多束光纤He-Ne激光器、钠光、日光灯作为相干光源，利用自光相干长度小的特点对迈克尔孙干涉仅调节优化，并对组合实验提出改进和设计。     

Enhancing Coherent Combining Efficiency via Choosing Appropriate Lasing Wavelength in a Michelson Compound Cavity Based on Two 3 dB Fibre Loop Mirrors and One Fibre Bragg Grating

Enhancing coherent combining efficiency via choosing appropriate lasing wavelength in a Michelson compound cavity based on two 3 dB fibre loop mirrors and one fibre Bragg grating （FBG） has been experimentally demonstrated. The FBG with 4.5% reflectivity is replaced at the cleaved facet with 4% Fresnel reflection. A high coherent combining efficiency of 93.5% is obtained when the FBG with central wavelength at 1559.845nm is introduced into the cavity, while it is only 90.1% combining efficiency with the FBG at central wavelength 1557.830 nm. In comparison with other reports, the proposed compound-cavity laser has the advantage of needless tuning FBG to obtain the coherent condition, and it is facile to ascertain the seemly wavelength lasing for a Michelson compound cavity.     

Efficient single-mode operation of a standing-wave dye laser

The selection of a single longitudinal mode of a dye laser can be achieved with double or triple Michelson reflectors instead of Fabry-Perot etalons inside the laser cavity. These systems can be adapted to commercial multimode dye lasers. They provide a high efficiency and a good geometrical quality of the output beam. With a 7 watt pump power (λ=514.5 nm line of the Ar⁺ laser), a tunable output power of 1 watt was obtained at the peak of R6G, in the main output beam; the total single-mode power, including the auxiliary output beams, exceeded 1.4 watt. These results correspond to efficiencies of 14% and 20%, respectively (24% and 30% slope efficiencies). We discuss in the text why these efficiencies are comparable to those of ring lasers. In the infrared, with a 4.5 watt pump power (red lines of a Kr⁺ laser), 250 mW of single-mode output power in the main output beam was obtained at 780 nm with Oxazine 750.     

Diffractive-optics-based beam combination of a phase-locked fiber laser array

A diffractive optical element (DOE) is used as a beam combiner for an actively phase-locked array of fiber lasers. Use of a DOE eliminates the far-field sidelobes and the accompanying loss of beam quality typically observed in tiled coherent laser arrays. Using this technique, we demonstrated coherent combination of five fiber lasers with 91% efficiency and M2=1.04. Combination efficiency and phase locking is robust even with large amplitude and phase fluctuations on the input laser array elements. Calculations and power handling measurements suggest that this approach can scale to both high channel counts and high powers.     

Efficient improvement of laser beam quality by coherent combining in an improved Michelson cavity

The efficient improvement of laser beam quality is demonstrated by coherent combining of two Nd:YVO4 lasers in an improved Michelson cavity. When the two lasers are separately operated with beam qualities of M(x)2 = 1.74 and M(y)2 = 1.34 for laser 1 and M(x)2 = 1.53 and M(y)2 = 1.39 for laser 2, by coherent combining of the two lasers, a single beam output exceeding 2 W with a nearly perfect TEM00 mode (M(x)2 = 1.08, M(y)2 = 1.04) is obtained. Moreover, it can withstand environmental perturbations with no change in beam quality or output power and has the potential for scaling to much higher output power with high beam quality by coherent addition of multiple lasers in this configuration.     

Coaxial combination of coherent laser beams

Based on polarization state conversion, a technique for coaxially coherent combination of laser beams is introduced. Laser beams can be coaxially coupled into one beam with high combination efficiency and perfect beam quality. A polarized laser beam combination system based on master oscillator power amplifier （MOPA） configuration is developed and the efficiencies of both unit combination and the whole system are investigated. In the experiment of combining four beams with single longitudinal mode, a combination efficiency of 85.3% is achieved. It can be further enhanced by improving the stability of experimental environment and the quality of optical and mechanical components.