Ab initio calculation of accurate dissociation energy, potential energy curve and dipole moment function for the A1∑ + state 7LiH molecule

The reasonable dissociation limit of the A¹∑⁺ state $^{7}$LiH molecule is obtained. The accurate dissociation energy and the equilibrium geometry of this state are calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space for the first time. The whole potential energy curve and the dipole moment function for theA¹∑⁺ state are calculated over a wide internuclear separation range from about 0.1 to 1.4\,nm. The calculated equilibrium geometry and dissociation energy of this potential energy curve are of R_{\e}=0.2487\,nm and D_{\e}=1.064\,eV, respectively. The unusual negative values of the anharmonicity constant and the vibration-rotational coupling constant are of \textit{\omega }_{\e}\textit{\chi }_{\e}=--4.7158cm^{ - 1} and \textit{\alpha }_{\e}=--0.08649cm^{ -1}, respectively. The vertical excitation energy from the ground to the A¹∑⁺ state is calculated and the value is of 3.613\,eV at 0.15875nm (the equilibrium position of the ground state). The highly anomalous shape of this potential energy curve, which is exceptionally flat over a wide radial range around the equilibrium position, is discussed in detail. The harmonic frequency value of 502.47cm¹ about this state is approximately estimated. Careful comparison of the theoretical determinations with those obtained by previous theories about the A¹∑⁺ state dissociation energy clearly shows that the present calculations are much closer to the experiments than previous theories, thus represents an improvement.     

Ab initio calculations on accurate dissociation energy, equilibrium geometry, and analytic potential energy function for the 6~3Π state of ~7LiH molecule

The accurate dissociation energy and equilibrium geometry of the 63Π state of 7LiH molecule is calculated using a symmetry-adapted-cluster configuration-interaction method in full active space. And the calculated results are 0.2580 eV and 0.1958 nm for the dissociation energy and equilibrium geometry, respectively. The whole potential energy curve for the 63Π state is also calculated over the internuclear separation range from about 0.10 to 0.54 nm. The results are fitted by the Murrell-Sorbie function. It is found that the Murrell-Sorbie function form, which is mainly used to fit the ground-state potential energy function, is well suitable for the excited triplet b3Π state. The vertical excitation energy from the ground state to the 63Π state is calculated to be 4.233 eV. Based on the analytic potential energy function, the harmonic frequency of 610.88 cm-1 about this state is firstly estimated. Compared with other theoretical results, this work is the most complete effort to deal with the analytic potential energy function and the harmonic frequency of this state.     

Ab initio calculation on accurate analytic potential energy functions and harmonic frequencies of c^3∑g^＋ and B^1-Пu states of dimer 7Li2

The comparison between single-point energy scanning （SPES） and geometry optimization （OPT） in determining the equilibrium geometries of c^3∑g^＋ and B^1-Пu states of dimer 7Li2 is made at numerous basis sets by using a symmetryadapted-cluster configuration-interaztion （SAC-CI） method in the Gaussian 03 program package. In this paper the difference of the equilibrium geometries obtained by SPES and by OPT is reported. The results obtained by SPES are found to be more reasonable than those obtained by OPT in full active space at the present SAC-CI level of theory. And the conclusion is attained that the cc-PVTZ is a most suitable basis set for these states. The calculated dissociation energies and equilibrium geometries are 0.8818 eV and 0.3090 nm for c^3∑g^＋ state, and 0.3668 eV and 0.2932 nm for B^1-Пu state respectively. The potential energy curves are calculated over a wide internuclear distance range from about 2.5α0 to 37α0 and have a least-squares fit into the Murrell-Sorbie function. According to the calculated analytic potential energy functions, the harmonic frequencies （We） and other spectroscopic data （ωeXe, Be and αe） are calculated. Comparison of the theoretical determinations at present work with the experiments and other theories clearly shows that the present work is the most complete effort and thus represents an improvement over previous theoretical results.     

The structure and the potential energy function of AlSO(C_S,X~2A″)

By using the B3P86/aug-cc-pvtz method,the accurate equilibrium geometry of the AlSO(CS,X2A″) molecule has been calculated and compared with available theoretical values.The obtained results show that the AlSO molecule has a most stable structure with bond lengths of R OAl = 0.1864 nm,R OS = 0.1623 nm,R AlS = 0.2450 nm,together with a dissociation energy of 13.88 eV.The possible electronic states and their reasonable dissociation limits for the ground state of the AlSO molecule were determined based on the principle of atomic and molecular reaction statics.The analytic potential energy function of the AlSO molecule was derived by the many-body expansion theory and the contour lines were constructed for the first time,which show the internal information of the AlSO molecule,including the equilibrium structure and stable point.The analysis demonstrates that the obtained potential energy function of AlSO is reasonable and successful and the present investigations provide important insights for further study on molecular reaction dynamics.     

Analytical Potential Energy Function for the Ground State X1∑+ of Lanthanum Monofluoride

The equilibrium geometry, harmonic frequency and bond dissociation energy of lanthanum monofluoride have been calculated using Density-Functional Theory (DFT), post-HF methods MP2 and CCSD(T) with the energyconsistent relativistic effective core potentials. The possible electronic state and reasonable dissociation limit of the ground state of LaF are determined based on atomic and molecular reaction statics. Potential energy curve scans for the ground state X 1∑+ have been performed at B3LYP and CCSD(T) levels, due to their better results of harmonic frequency and bond dissociation energy. We find that the potential energy calculated with CCSD(T) is about 0.6 eV larger than the bond dissociation energy, when the internuclear distance is as large as 0.8 nm. The problem that single-reference ab initio methods do not meet dissociation limit during calculations of lanthanide heavy-metal elements is analyzed. We propose the calculation scheme to derive the analytical Murrell-Sorbie potential energy function. Vibrotational spectroscopic constants Be, ωe, ωeχe, αe, βe, De and He obtained by the standard Dunham treatment coincide well with the results of rotational analyses on spectroscopic experiments.     

Theoretical study of structure and analytic potential energy function for the ground state of PO2 molecule

In this paper, the energy, the equilibrium geometry, and the harmonic frequency of the ground electronic state of PO₂ are computed using B3LYP, B3P86, CCSD(T), and QCISD(T) methods in conjunction with 6-311++G(3df, 3pd) and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311++G(3df, 3pd) method can give better energy calculation results for the PO₂ molecule. It is shown that the ground state of the PO₂ molecule has C_2v symmetry and its ground electronic state is X²A₁. The equilibrium parameters of the structure are R_P-O=0.1465 nm, d=19.218 eV. The bent vibrational frequency ν₁=386 cm^-1, the symmetric stretching frequency ν₂=1095 cm^-1, and the asymmetric stretching frequency ν₃=1333 cm^-1 are obtained. On the basis of atomic and molecular reaction statics, the reasonable dissociation limit for the ground state of the PO₂ molecule is determined. Then the analytic potential energy function of the PO₂ molecule is first derived by using the many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO₂ molecule.     

The molecular structure and the analytical potential energy function of S2^- and S3^-

In this paper, the equilibrium geometry, harmonic frequency and dissociation energy of S2^- and S3^- have been calculated at QCISD/6-311＋＋G（3d2f） and B3P86/6-311＋＋G（3d2f） level. The S2^- ground state is of 2IIg, the S3^- ground state is of 2B1 and S3^- has a bent （C2v） structure with an angle of 115.65° The results are in good agreement with these reported in other literature. For S3^- ion, the vibration frequencies and the force constants have also been calculated. Base on the general principles of microscopic reversibility, the dissociation limits has been deduced. The Murrell-Sorbie potential energy function for S2^- has been derived according to the ab initio data through the least- squares fitting. The force constants and spectroscopic data for S2^- have been calculated, then compared with other theoretical data. The analytical potential energy function of S3^- have been obtained based on the many-body expansion theory. The structure and energy can correctly reappear on the potential surface.     

Ab initio calculations on the spectroscopic constants, vibrational levels and classical turning points for the 21∏u state of dimer 7Li2

The accurate dissociation energy and harmonic frequency for the highly excited 2^1Пu state of dimer ^7Li2 have been calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space. The calculated results are in excellent agreement with experimental measurements. The potential energy curves at numerous basis sets for this state are obtained over a wide internuclear separation range from about 2.4a0 to 37.0a0. And the conclusion is gained that the basis set 6-311＋＋G（d,p） is a most suitable one. The calculated spectroscopic constants De, Re, ωe, ωeχe, ae and Be at 6-311＋＋G（d,p） are 0.9670 eV, 0.3125 nm, 238.6 cm^-1, 1.3705 cm^-1, 0.0039 cm^-1 and 0.4921 cm^-1, respectively. The vibrational levels are calculated by solving the radial SchrSdinger equation of nuclear motion. A total of 53 vibrational levels are found and reported for the first time. The classical turning points have been computed. Comparing with the measurements, in which only the first nine vibrational levels have been obtained so far, the present calculations are very encouraging. A careful comparison of the present results of the parameters De and We with those obtained from previous theories clearly shows that the present calculations are much closer to the measurements than previous theoretical results, thus representing an improvement on the accuracy of the ab initio calculations of the potentials for this state.     

The analytical potential energy function of flue gas SO2（X1A1）

The equilibrium structure of flue gas SO2 is optimized using the density functional theory （DFT）/B3P86 method and CC-PV5Z basis. The result shows that it has a bent （C2v, X1A1） ground state structure with an angle of 119.1184°. The vibronic frequencies and the force constants are also calculated. Based on the principles of atomic and molecular reaction statics （AMIIS）, the possible electronic states and reasonable dissociation limits for the ground state of SO2 molecule are determined. The potential functions of SO and 02 are fitted by the modified Murrell-Sorbie＋c6 （M-S＋c6） potential function and the fitted parameters, the force constants and the spectroscopic constants are obtained, which are all close to the experimental values. The analytic potential energy function of the SO2 （X1A1） molecule is derived using the many-body expansion theory. The contour liues are constructed, which show the static properties of SO2 （XIA1）, such as the equilibrium structure, the lowest energies, the most possible reaction channel, etc.     

Potential energy surfaces of ozone in the ground state

Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q {\it ab initio} calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C离解能;空气;能量表面;地面ozone, potential energy surface, barrier, dissociation energyProject supported by the National Natural Science Foundation of China (Grant Nos~10376021 and 10676025), and the Scientific Research Fund of Sichuan Provincial Education Department, China (Grant No~2006A131).2006-10-08Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q ab initio calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C2v symmetry in the ground state is described by the simplified Sorbie-Murrell many-body expansion potential function according to the ozone molecule symmetry. The contour of bond stretching vibration potential of an O3 in the ground state, with a bond angle （θ） fixed, and the contour of O3 potential for O rotating around O1-O （R1）, with O1-O bond length taken as the one at equilibrium, are plotted. Moreover, the potentials are analysed.     

Structure and analytical potential energy function for the ground state of the BCx (x=0, －1)

In this paper, the electronic states of the ground states and dissociation limits of BC and BC- are correctly determined based on group theory and atomic and molecular reaction statics. The equilibrium geometries, harmonic frequencies and dissociation energies of the ground state of BC and BC- are calculated by using density function theory and quadratic CI method including single and double substitutions. The analytical potential energy functions of these states have been fitted with Murrell-Sorbie potential energy function from our ab initio calculation results. The spectroscopic data （αe, ωe and ωeχe） of each state is calculated via the relation between analytical potential energy function and spectroscopic data. All the calculations are in good agreement with the experimental data.     

Molecular structure and analytical potential energy function of SeCO

The density functional method(B3P86/6-311G) is used for calculating the possible structures of SeC, SeO, and SeCO molecules. The result shows that the ground state of the SeC molecule is1Σ, the equilibrium nuclear distance is RSeC= 0.1699 nm, and the dissociation energy is De = 8.7246 eV. The ground state of the SeO molecule is3Σ, with equilibrium nuclear distance RSeO= 0.1707 nm and dissociation energy De = 7.0917 eV. There are two structures for the ground state of the SeCO molecule: Se=C=O and Se=O=C. The linear Se=C=O is1Σ. Its equilibrium nuclear distances and dissociation energy are RSeC= 0.1715 nm, RCO= 0.1176 nm and 18.8492 eV, respectively. The other structure Se=O=C is1Σ. Its equilibrium nuclear distances and dissociation energy are RCO= 0.1168 nm, RSeO= 0.1963 nm and 15.5275 eV,respectively. The possible dissociative limit of the SeCO molecule is analyzed. The potential energy function for the SeCO molecule has been obtained from the many-body expansion theory. The contour of the potential energy curve describes the structure characters of the SeCO molecule. Furthermore, contours of the molecular stretching vibration based on this potential energy function are discussed.     

Investigation of analytical harmonic frequency and potential energy function,vibrational levels for the X^2∑^＋ and A^2Л states of CN radical

This paper calculates the equilibrium structure and the potential energy functions of the ground state （X^2∑^＋） and the low lying excited electronic state （A^2Л） of CN radical are calculated by using CASSCF method. The potential energy curves are obtained by a least square fitting to the modified Murrell-Sorbie function. On the basis of physical theory of potential energy function, harmonic frequency （ωe） and other spectroscopic constants （ωeχe, βe and αe） are calculated by employing the Rydberg-Klei-Rees method. The theoretical calculation results are in excellent agreement with the experimental and other complicated theoretical calculation data. In addition, the eigenvalues of vibrational levels have been calculated by solving the radial one-dimensional SchrSdinger equation of nuclear motion using the algebraic method based on the analytical potential energy function.     

Theoretical study of the structure and analytic potential energy function for the ground state of the PO2 molecule

In this paper, the energy, equilibrium geometry, and harmonic frequency of the ground electronic state of PO2 are computed using the B3LYP, B3P86, CCSD（T）, and QCISD（T） methods in conjunction with the 6-311＋＋G（3df, 3pd） and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311＋＋G（3df, 3pd） method can give better energy calculation results for the PO2 molecule. It is shown that the ground state of the PO2 molecule has C2v symmetry and its ground electronic state is X2A1. The equilibrium parameters of the structure are Rp-o = 0.1465 am, ZOPO = 134.96°, and the dissociation energy is Ed = 19.218 eV. The bent vibrational frequency Ul = 386 cm-1, symmetric stretching frequency v2 = 1095 cm-1, and asymmetric stretching frequency ua = 1333 em-1 are obtained. On the basis of atomic and molecular reaction statics, a reasonable dissociation limit for the ground state of the PO2 molecule is determined. Then the analytic potential energy function of the PO2 molecule is derived using many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO2 molecule.     

The analytical potential energy function of flue gas SO₂（X¹A₁）

The equilibrium structure of flue gas SO 2 is optimized using the density functional theory (DFT)/ B3P86 method and CC-PV5Z basis. The result shows that it has a bent (C2V ,X1A1) ground state structure with an angle of 119.1184 . The vibronic frequencies and the force constants are also calculated. Based on the principles of atomic and molecular reaction statics (AMRS), the possible electronic states and reasonable dissociation limits for the ground state of SO2 molecule are determined. The potential functions of SO and O2 are fitted by the modified Murrell–Sorbie+c6 (M-S+c6) potential function and the fitted parameters, the force constants and the spectroscopic constants are obtained, which are all close to the experimental values. The analytic potential energy function of the SO2 (X1A1) molecule is derived using the many-body expansion theory. The contour lines are constructed, which show the static properties of SO2 (X1A1), such as the equilibrium structure, the lowest energies, the most possible reaction channel, etc.     

Potential Energy Surfaces of Nitrogen Dioxide for the Ground State

The potential energy function of nitrogen dioxide with the C2v symmetry in the ground state is represented using the simplified Sorbie-Murrell many-body expansion function in terms of the symmetry of NO2. Using the potential energy function, some potential energy surfaces of NO2（C2v, X^-^2A1）, such as the bond stretching contour plot for a fixed equilibrium geometry angle θ and contour for O moving around N-O （R1）, in which R1 is fixed at the equilibrium bond length, are depicted. The potential energy surfaces are analysed. Moreover, the equilibrium parameters for NO2 with the C2v, Cs and Dsn symmetries, such as equilibrium geometry structures and energies, are calculated by the ab initio （CBS-Q） method.     

Theoretical study of the structure and analytic potential energy function for the ground state of the PO₂ molecule

In this paper, the energy, equilibrium geometry, and harmonic frequency of the ground electronic state of PO2 are computed using the B3LYP, B3P86, CCSD(T), and QCISD(T) methods in conjunction with the 6-311++G(3df, 3pd) and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311++G(3df, 3pd) method can give better energy calculation results for the PO 2 molecule. It is shown that the ground state of the PO2 molecule has C2v symmetry and its ground electronic state is X2 A1 . The equilibrium parameters of the structure are R P O = 0.1465 nm, ∠OPO = 134.96°, and the dissociation energy is Ed = 19.218 eV. The bent vibrational frequency ν 1 = 386 cm-1 , symmetric stretching frequency ν 2 = 1095 cm-1 , and asymmetric stretching frequency ν 3 = 1333 cm-1 are obtained. On the basis of atomic and molecular reaction statics, a reasonable dissociation limit for the ground state of the PO2 molecule is determined. Then the analytic potential energy function of the PO2 molecule is derived using many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO2 molecule.     

The molecular structure and analytical potential energy function of HCO （X^2A＇）

In this paper the equilibrium structure of HCO has been optimized by using density functional theory （DFT）/ B3P86 method and CC-PVTZ basis. It has a bent （Cs, X^2A＇） ground state structure with an angle of 124.4095 °. The vibronic frequencies and force constants have also been calculated. Based on the principles of atomic and molecular reaction statics, the possible electronic states and reasonable dissociation limits for the ground state of HCO molecule have been determined. The analytic potential energy function of HCO （X^2A＇） molecule has been derived by using the many-body expansion theory. The contour lines are constructed, which show the static properties of HCO （X^2A＇）, such as the equilibrium structure, the lowest energies, etc. The potential energy surface of HCO （X^2A＇） is reasonable and very satisfactory.     

二氧化碳分子离子经由Ã2Πu1/2电子态振动能级共振的光解动力学：一项时间切片离子速度成像技术研究

We report on the photodissociation dynamics of CO₂⁺ via its òΠ_u,1/2 state using the scheme of [1+1] photon excitation that is intermediated by the mode-selected òΠ_u,1/2( u1,u2,0) vibronic states. Photodissociation fragment exciation spectrum and images of photofragment CO⁺ have been measured to obtain reaction dynamics parameters such as the available energy and the average translational energy. Combining with the potential energy functions of CO₂⁺, the dissociation mechanism of CO₂⁺ is discussed. The conformational variation of CO₂⁺ from linear to bent on the photodissociation dynamics of CO₂⁺ is verified.     

Ab initio configuration interaction study of the ground and low-lying excited states of ZnCd

The multi-reference configuration interaction (MRCI) electronic energy calculations have been carried out on the ground state (X~1∑) as well as three low-lying excited states (~3E,~1∏,~3∏) of ZnCd dimer.Poten- tial energy curves (PECs) are therefore generated and fitted to the analytical potential energy functions (APEFs) using the Murrel-Sorbie (MS) potential function.Based on the PECs,the vibrational levels of each state are determined by solving Schr(?)dinger equation of nuclear motion,and corresponding spec- troscopic parameters are accurately calculated using the APEFs.The present values of spectroscopic parameters including equilibrium positions and dissociation energies are compared with other theoretical reports available at present.