Structure and analytical potential energy function for the ground state of the BCx (x=0, －1)

In this paper, the electronic states of the ground states and dissociation limits of BC and BC- are correctly determined based on group theory and atomic and molecular reaction statics. The equilibrium geometries, harmonic frequencies and dissociation energies of the ground state of BC and BC- are calculated by using density function theory and quadratic CI method including single and double substitutions. The analytical potential energy functions of these states have been fitted with Murrell-Sorbie potential energy function from our ab initio calculation results. The spectroscopic data （αe, ωe and ωeχe） of each state is calculated via the relation between analytical potential energy function and spectroscopic data. All the calculations are in good agreement with the experimental data.     

Theoretical study of the structure and analytic potential energy function for the ground state of the PO₂ molecule

In this paper, the energy, equilibrium geometry, and harmonic frequency of the ground electronic state of PO2 are computed using the B3LYP, B3P86, CCSD(T), and QCISD(T) methods in conjunction with the 6-311++G(3df, 3pd) and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311++G(3df, 3pd) method can give better energy calculation results for the PO 2 molecule. It is shown that the ground state of the PO2 molecule has C2v symmetry and its ground electronic state is X2 A1 . The equilibrium parameters of the structure are R P O = 0.1465 nm, ∠OPO = 134.96°, and the dissociation energy is Ed = 19.218 eV. The bent vibrational frequency ν 1 = 386 cm-1 , symmetric stretching frequency ν 2 = 1095 cm-1 , and asymmetric stretching frequency ν 3 = 1333 cm-1 are obtained. On the basis of atomic and molecular reaction statics, a reasonable dissociation limit for the ground state of the PO2 molecule is determined. Then the analytic potential energy function of the PO2 molecule is derived using many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO2 molecule.     

Theoretical study of the structure and analytic potential energy function for the ground state of the PO2 molecule

In this paper, the energy, equilibrium geometry, and harmonic frequency of the ground electronic state of PO2 are computed using the B3LYP, B3P86, CCSD（T）, and QCISD（T） methods in conjunction with the 6-311＋＋G（3df, 3pd） and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311＋＋G（3df, 3pd） method can give better energy calculation results for the PO2 molecule. It is shown that the ground state of the PO2 molecule has C2v symmetry and its ground electronic state is X2A1. The equilibrium parameters of the structure are Rp-o = 0.1465 am, ZOPO = 134.96°, and the dissociation energy is Ed = 19.218 eV. The bent vibrational frequency Ul = 386 cm-1, symmetric stretching frequency v2 = 1095 cm-1, and asymmetric stretching frequency ua = 1333 em-1 are obtained. On the basis of atomic and molecular reaction statics, a reasonable dissociation limit for the ground state of the PO2 molecule is determined. Then the analytic potential energy function of the PO2 molecule is derived using many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO2 molecule.     

Ab initio calculations on accurate dissociation energy, equilibrium geometry, and analytic potential energy function for the 6~3Π state of ~7LiH molecule

The accurate dissociation energy and equilibrium geometry of the 63Π state of 7LiH molecule is calculated using a symmetry-adapted-cluster configuration-interaction method in full active space. And the calculated results are 0.2580 eV and 0.1958 nm for the dissociation energy and equilibrium geometry, respectively. The whole potential energy curve for the 63Π state is also calculated over the internuclear separation range from about 0.10 to 0.54 nm. The results are fitted by the Murrell-Sorbie function. It is found that the Murrell-Sorbie function form, which is mainly used to fit the ground-state potential energy function, is well suitable for the excited triplet b3Π state. The vertical excitation energy from the ground state to the 63Π state is calculated to be 4.233 eV. Based on the analytic potential energy function, the harmonic frequency of 610.88 cm-1 about this state is firstly estimated. Compared with other theoretical results, this work is the most complete effort to deal with the analytic potential energy function and the harmonic frequency of this state.     

The molecular structure and the analytical potential energy function of S2^- and S3^-

In this paper, the equilibrium geometry, harmonic frequency and dissociation energy of S2^- and S3^- have been calculated at QCISD/6-311＋＋G（3d2f） and B3P86/6-311＋＋G（3d2f） level. The S2^- ground state is of 2IIg, the S3^- ground state is of 2B1 and S3^- has a bent （C2v） structure with an angle of 115.65° The results are in good agreement with these reported in other literature. For S3^- ion, the vibration frequencies and the force constants have also been calculated. Base on the general principles of microscopic reversibility, the dissociation limits has been deduced. The Murrell-Sorbie potential energy function for S2^- has been derived according to the ab initio data through the least- squares fitting. The force constants and spectroscopic data for S2^- have been calculated, then compared with other theoretical data. The analytical potential energy function of S3^- have been obtained based on the many-body expansion theory. The structure and energy can correctly reappear on the potential surface.     

Ab initio calculations on the spectroscopic constants, vibrational levels and classical turning points for the 21∏u state of dimer 7Li2

The accurate dissociation energy and harmonic frequency for the highly excited 2^1Пu state of dimer ^7Li2 have been calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space. The calculated results are in excellent agreement with experimental measurements. The potential energy curves at numerous basis sets for this state are obtained over a wide internuclear separation range from about 2.4a0 to 37.0a0. And the conclusion is gained that the basis set 6-311＋＋G（d,p） is a most suitable one. The calculated spectroscopic constants De, Re, ωe, ωeχe, ae and Be at 6-311＋＋G（d,p） are 0.9670 eV, 0.3125 nm, 238.6 cm^-1, 1.3705 cm^-1, 0.0039 cm^-1 and 0.4921 cm^-1, respectively. The vibrational levels are calculated by solving the radial SchrSdinger equation of nuclear motion. A total of 53 vibrational levels are found and reported for the first time. The classical turning points have been computed. Comparing with the measurements, in which only the first nine vibrational levels have been obtained so far, the present calculations are very encouraging. A careful comparison of the present results of the parameters De and We with those obtained from previous theories clearly shows that the present calculations are much closer to the measurements than previous theoretical results, thus representing an improvement on the accuracy of the ab initio calculations of the potentials for this state.     

Investigation of analytical harmonic frequency and potential energy function,vibrational levels for the X^2∑^＋ and A^2Л states of CN radical

This paper calculates the equilibrium structure and the potential energy functions of the ground state （X^2∑^＋） and the low lying excited electronic state （A^2Л） of CN radical are calculated by using CASSCF method. The potential energy curves are obtained by a least square fitting to the modified Murrell-Sorbie function. On the basis of physical theory of potential energy function, harmonic frequency （ωe） and other spectroscopic constants （ωeχe, βe and αe） are calculated by employing the Rydberg-Klei-Rees method. The theoretical calculation results are in excellent agreement with the experimental and other complicated theoretical calculation data. In addition, the eigenvalues of vibrational levels have been calculated by solving the radial one-dimensional SchrSdinger equation of nuclear motion using the algebraic method based on the analytical potential energy function.     

Ab initio calculations of accurate dissociation energy and analytic potential energy function for the second excited state B1∏ of 7LiH

The reasonable dissociation limit of the second excited singlet state B¹∏ of ⁷LiH molecule is obtained. The accurate dissociation energy and equilibrium geometry of the B¹\Pi state are calculated using a symmetry-adapted-cluster configuration--interaction method in full active space. The whole potential energy curve for the B¹∏ state is obtained over the internuclear distance ranging from about 0.10nm to 0.54nm, and has a least-square fit to the analytic Murrell--Sorbie function form. The vertical excitation energy is calculated from the ground state to the B¹∏ state and compared with previous theoretical results. The equilibrium internuclear distance obtained by geometry optimization is found to be quite different from that obtained by single-point energy scanning under the same calculation condition. Based on the analytic potential energy function, the harmonic frequency value of the B¹∏ state is estimated. A comparison of the theoretical calculations of dissociation energies, equilibrium interatomic distances and the analytic potential energy function with those obtained by previous theoretical results clearly shows that the present work is more comprehensive and in better agreement with experiments than previous theories, thus it is an improvement on previous theories.     

Ab initio calculation of accurate dissociation energy, potential energy curve and dipole moment function for the A1∑ + state 7LiH molecule

The reasonable dissociation limit of the A¹∑⁺ state $^{7}$LiH molecule is obtained. The accurate dissociation energy and the equilibrium geometry of this state are calculated using a symmetry-adapted-cluster configuration-interaction method in complete active space for the first time. The whole potential energy curve and the dipole moment function for theA¹∑⁺ state are calculated over a wide internuclear separation range from about 0.1 to 1.4\,nm. The calculated equilibrium geometry and dissociation energy of this potential energy curve are of R_{\e}=0.2487\,nm and D_{\e}=1.064\,eV, respectively. The unusual negative values of the anharmonicity constant and the vibration-rotational coupling constant are of \textit{\omega }_{\e}\textit{\chi }_{\e}=--4.7158cm^{ - 1} and \textit{\alpha }_{\e}=--0.08649cm^{ -1}, respectively. The vertical excitation energy from the ground to the A¹∑⁺ state is calculated and the value is of 3.613\,eV at 0.15875nm (the equilibrium position of the ground state). The highly anomalous shape of this potential energy curve, which is exceptionally flat over a wide radial range around the equilibrium position, is discussed in detail. The harmonic frequency value of 502.47cm¹ about this state is approximately estimated. Careful comparison of the theoretical determinations with those obtained by previous theories about the A¹∑⁺ state dissociation energy clearly shows that the present calculations are much closer to the experiments than previous theories, thus represents an improvement.     

Spin polarization effect for Mn2 molecule

The density functional theory method （DFT） （b3p86） of Gaussian 03 has been used to optimize the structure of the Mn2 molecule. The result shows that the ground state of the Mn2 molecule is an 11-multiple state, indicating a spin polarization effect in the Mn2 molecule, a transition metal element molecule. Meanwhile, we have not found any spin pollution because the wavefunction of the ground state does not mingle with wavefunctions of higher-energy states. So the ground state for Mn2 molecule being of an 11-multiple state is the indicative of spin polarization effect of the Mn2 molecule among those in the transition metal elements： that is, there are 10 parallel spin electrons in a Mn2 molecule. The number of non-conjugated electrons is the greatest. These electrons occupy different spacious orbitals so that the energy of the Mn2 molecule is minimized. It can be concluded that the effect of parallel spin in the Mn2 molecule is larger than the effect of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell-Sorbie potential functions with the parameters for the ground state and other states of the Mn2 molecule are derived. The dissociation energy De for the ground state of the Mn2 molecule is 1.4477 eV, equilibrium bond length Re is 0.2506 nm, vibration frequency ωe is 211.51 cm^-1. Its force constants f2, f3, and f4 are 0.7240 aJ·nm-2, -3.35574 aJ·nm^-3, 11.4813 aJ·nm^-4 respectively. The other spectroscopic data for the ground state of the Mn2 molecule ωeχe, Be, αe are 1.5301 cm^-1, 0.0978 cm^-1, 7.7825×10^-4 cm^-1 respectively.     

Spin polarization effect for Cr2 molecule

Density functional theory （DFT） （B3P86） of Gaussian 03 has been used to optimize the structure of the Cr2 molecule, a transition metal element molecule. The result shows that the ground state for the Cr2 molecule is a 13- multiple state, indicating that there exists a spin polarization effect in the Cr2 molecule. Meanwhile, we have not found any spin pollution because the wave function of the ground state does not mingle with wave functions of higher-energy states. So the ground state for Cr2 molecule being a 13-multiple state is indicative of spin polarization effect of the Cr2 molecule among transition metal elements, that is, there are 12 parallel spin electrons in the Cr2 molecule. The number of non-conjugated electrons is greatest. These electrons occupy different spatial orbitals so that the energy of the Cr2 molecule is minimized. It can be concluded that the effect of parallel spin in the Cr2 molecule is larger than the effect of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell Sorbie potential functions with the parameters for the ground state and other states of the Cr2 molecule are derived. The dissociation energy De for the ground state of the Cr2 molecule is 0.1034eV, equilibrium bond length Re is 0.3396 nm, and vibration frequency we is 73.81cm^-1. Its force constants f2, f3 and f4 are 0.0835, -0.2831 and 0.3535 aJ. nm^-4 respectively. The other spectroscopic data for the ground state of the Cr2 molecule ωeχe, Be and αe are 1.2105, 0.0562 and 7.2938 x 10^-4cm^-1 respectively.     

THE ACQM THEORETICAL CALCULATION OF LOW—LYING EXCITED STATES FOR HeH

The Low-lying excited states of HeH have been calculated by arrangement channel quantum mechanics(ACQM),The calculated potential curves,equilibrium geometry,Rc.dissociation energy Dc.harmonic vibration frequency ω0 and quadratic force coustant F2 are comparable with Ci calculations.     

Spin polarization effect of Ni2 molecule

The density functional theory （DFT） method （b3p86） of Gaussian 03 is used to optimize the structure of the Ni2 molecule. The result shows that the ground state for the Ni2 molecule is a 5-multiple state, symbolizing a spin polarization effect existing in the Ni2 molecule, a transition metal molecule, but no spin pollution is found because the wavefunction of the ground state does not mingle with wavefunctions of higher-energy states. So the ground state for Ni2 molecule, which is a 5-multiple state, is indicative of spin polarization effect of the Ni2 molecule, that is, there exist 4 parallel spin electrons in Ni2 molecule. The number of non-conjugated electrons is greatest. These electrons occupy different spatial orbitals so that the energy of the Ni2 molecule is minimized. It can be concluded that the effect of parallel spin in the Ni2 molecule is larger than that of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell-Sorbie potential functions with the parameters of the ground state and other states of the Ni2 molecule are derived. The dissociation energy De for the ground state of the Ni2 molecule is 1.835 eV, equilibrium bond length Re is 0.2243 nm, vibration frequency we is 262.35 cm^-1. Its force constants f2, f3 and f4 are 1.1901 aJ.nm^-2, -5.8723 aJ.nm^-3, and 21.2505 aJ.nm^-4 respectively. The other spectroscopic data for the ground state of the Ni2 molecule ωeχe, Be and αe are 1.6315cm 2, 0.1141 cm^-1, and 8.0145× 10^-4 cm^-1 respectively.     

Molecular structure and analytical potential energy function of SeCO

The density functional method(B3P86/6-311G) is used for calculating the possible structures of SeC, SeO, and SeCO molecules. The result shows that the ground state of the SeC molecule is1Σ, the equilibrium nuclear distance is RSeC= 0.1699 nm, and the dissociation energy is De = 8.7246 eV. The ground state of the SeO molecule is3Σ, with equilibrium nuclear distance RSeO= 0.1707 nm and dissociation energy De = 7.0917 eV. There are two structures for the ground state of the SeCO molecule: Se=C=O and Se=O=C. The linear Se=C=O is1Σ. Its equilibrium nuclear distances and dissociation energy are RSeC= 0.1715 nm, RCO= 0.1176 nm and 18.8492 eV, respectively. The other structure Se=O=C is1Σ. Its equilibrium nuclear distances and dissociation energy are RCO= 0.1168 nm, RSeO= 0.1963 nm and 15.5275 eV,respectively. The possible dissociative limit of the SeCO molecule is analyzed. The potential energy function for the SeCO molecule has been obtained from the many-body expansion theory. The contour of the potential energy curve describes the structure characters of the SeCO molecule. Furthermore, contours of the molecular stretching vibration based on this potential energy function are discussed.     

An ab initio study of the Ne-CO complex

A new ab initio potential energy surface of the Ne-CO complex is developed using single and double excitation coupled-cluster theory with noniterative treatment of triple excitations [CCSD(T)].The potential has a minimum value of 49.396 cm 1 at R e = 6.40a 0 with approximately T-shaped geometry(θ e = 82.5).Bound state energies are calculated up to J = 12.The theoretically predicted transition frequencies and spectroscopic constants are in good agreement with the available experimental results.     

Theoretical study of structure and analytic potential energy function for the ground state of PO2 molecule

In this paper, the energy, the equilibrium geometry, and the harmonic frequency of the ground electronic state of PO₂ are computed using B3LYP, B3P86, CCSD(T), and QCISD(T) methods in conjunction with 6-311++G(3df, 3pd) and cc-pVTZ basis sets. A comparison between the computational results and the experimental values indicates that the B3P86/6-311++G(3df, 3pd) method can give better energy calculation results for the PO₂ molecule. It is shown that the ground state of the PO₂ molecule has C_2v symmetry and its ground electronic state is X²A₁. The equilibrium parameters of the structure are R_P-O=0.1465 nm, d=19.218 eV. The bent vibrational frequency ν₁=386 cm^-1, the symmetric stretching frequency ν₂=1095 cm^-1, and the asymmetric stretching frequency ν₃=1333 cm^-1 are obtained. On the basis of atomic and molecular reaction statics, the reasonable dissociation limit for the ground state of the PO₂ molecule is determined. Then the analytic potential energy function of the PO₂ molecule is first derived by using the many-body expansion theory. The potential curves correctly reproduce the configurations and the dissociation energy for the PO₂ molecule.     

Multireference configuration interaction potential curve and analytical potential energy function of the ground and low-lying excited states of CdSe

The potential energy curves (PECs) of the ground state ($^{3}\Pi )$ and three low-lying excited states ($^{1}\Sigma $, $^{3}\Sigma $,$^{ 1}\Pi )$ of CdSe dimer have been studied by employing quasirelativistic effective core potentials on the basis of the complete active space self-consistent field method followed by multireference configuration interaction calculation. The four PECs are fitted to analytical potential energy functions using the Murrel--Sorbie potential function. Based on the PECs, the vibrational levels of the four states are determined by solving the Schr\"{o}dinger equation of nuclear motion, and corresponding spectroscopic constants are accurately calculated. The equilibrium positions as well as the spectroscopic constants and the vibrational levels are reported. By our analysis, the $^{3}\Pi $ state, of which the dissociation asymptote is Cd($^{1}$S) + Se($^{3}$P), is identified as a ground state of CdSe dimer, and the corresponding dissociation energy is estimated to be 0.39\,eV. However, the first excited state is only 1132.49\,cm$^{ - 1}$ above the ground state and the $^{3}\Sigma $ state is the highest in the four calculated states.     

Structure and stability of various states of the EuC and EuC2 molecules

B3LYP level density functional theory （DFT） and multiconfiguration self-consistent-field （MCSCF） level ab initio method calculations have been performed on the basis of relativistic effective core potentials to investigate the nature of EuC and EuC2 molecules. The computed results indicate that the ground states of EuC and EuC2 are ^12∑^＋ and SA2, respectively. Dissociation potential energy curves of the low-lying electronic states of EuC have been calculated using the MCSCF method, and the same level calculation on EuC2 indicates that the dissociation energy of EuC2 of ground state compares well with the available experimental data. The bond characteristic is also discussed using Mulliken populations.     

Accurate potential energy function and spectroscopic study of the X^2∑＋, A^2П and B^2∑＋ states of the CP radical

This paper calculates the equilibrium internuclear separations, the harmonic frequencies and the potential energy curves of the X^2∑＋, A^2П and B^2∑＋ states of the CP radical by the highly accurate valence internally contracted multireference configuration interaction method with correlation-consistent basis sets （aug-cc-pV6Z for C atom and aug-cc-pVQZ for P atom）. The potential energy curves are all fitted with the analytic potential energy function by the least-square fitting. Employing the analytic potential energy function, we determine the spectroscopic constants （Be, αe and ωeχe） of these states. For the X2∑＋ state, the obtained values of De, Be, αe, ωeχe, Re and ωe are 5.4831 eV, 0.792119 cm-1, 0.005521 cm-1, 6.89653 cm-1, 0.15683 nm, 12535.11 cm-1, respectively. For the A2H state, the present values of De, Be,αe, ωeχe, Re and We are 4.586 eV, 0.703333 cm-1, 0.005458 cm-1, 6.03398 cm-1, 0.16613 nm, 1057.89 cm-1, respectively. For the B2E＋ state, the present values of De, Be, αe, ωeχe, Re and We are 3.506 eV, 0.677561 cm-1, 0.00603298 cm-1, 5.68809 cm-1, 0.1696 nm, 822.554 cm-1, respectively. For these states, the vibrational states with the rotational quantum number J equals zero （J = 0） are studied by solving the radial nuclear Schr6dinger equation using the Numerov method. For each vibrational state, the vibrational level, the classical turning points, the rotational inertial and the centrifugal distortion constants are calculated. Comparison is made with recent theoretical and experimental results.     

Potential energy surfaces of ozone in the ground state

Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q {\it ab initio} calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C离解能;空气;能量表面;地面ozone, potential energy surface, barrier, dissociation energyProject supported by the National Natural Science Foundation of China (Grant Nos~10376021 and 10676025), and the Scientific Research Fund of Sichuan Provincial Education Department, China (Grant No~2006A131).2006-10-08Equilibrium parameters of ozone, such as equilibrium geometry structure parameters, force constants and dissociation energy are presented by CBS-Q ab initio calculations. The calculated equilibrium geometry structure parameters and energy are in agreement with the corresponding experimental values. The potential energy function of ozone with a C2v symmetry in the ground state is described by the simplified Sorbie-Murrell many-body expansion potential function according to the ozone molecule symmetry. The contour of bond stretching vibration potential of an O3 in the ground state, with a bond angle （θ） fixed, and the contour of O3 potential for O rotating around O1-O （R1）, with O1-O bond length taken as the one at equilibrium, are plotted. Moreover, the potentials are analysed.