浅海波导中目标散射的边界元方法

提出了一种计算三维散射体在声速剖面随深度变化、距离无关浅海波导中散射声场的数值方法波导边界元方法。当散射体不十分靠近波导界面因而边界多次散射可以忽略时,在边界元计算中可以用自由场格林函数近似波导格林函数。应用镜像法和球波函数加法定理推导了理想波导中球体散射声场的解析解,用来验证波导边界元方法的计算精度,证明该数值方法是准确的。对浅海波导中水下潜器散射声场数值模拟的结果表明,浅海波导海面、海底界面反射、声速剖面等对目标散射声场的幅值和方向性都有很大的影响。      

基于射线跟踪技术的浅海波导中目标回声计算

基于浅海波导中目标回声计算的射线声学方法,将数值模型推广到任意声速剖面的情况,发展了基于射线跟踪技术的浅海波导中复杂目标回声的数值计算方法。应用HAPRO声线模型跟踪计算本征声线,并结合板块元方法计算浅海波导中的目标声散射。算例比较了冬、夏两季典型声速剖面和细沙、黏土海底等不同浅海环境情况下的目标回声特性。计算表明,浅海波导中球体和横向放置的长圆柱体的等效目标强度ETS与自由空间中的目标强度TS很接近,声速剖面和海底底质对这类目标的ETS影响很小,传统意义上的声呐方程基本上成立。竖向放置的长度/波长比远大于1长圆柱以及benchmark潜艇等复杂形状目标的ETS与自由空间中的TS差别较大,传统的主动声呐方程存在较大误差。      

浅海不确定声场的随机多项式展开法研究

为获得求解浅海不确定声场的普适模型,建立了随机多项式展开法与Helmholtz方程的非嵌入式耦合模型,其间运用概率配点法求解多项式系数。针对仅当海水深度不确定时的Pekeris波导、声速剖面和海深均不确定时的Pekeris波导以及下限深度不确定温跃层等几种情形,计算了传播损失概率密度分布。结果表明所建模型对声场计算模型普适性强,计算精度和计算效率高,可用于研究含多个不确定环境参数、声速剖面复杂的浅海环境中声传播的不确定性。      

大深度接收时深海直达波区的复声强及声线到达角估计

基于射线模型给出了质点水平振速、垂直振速及复声强的表达式.结合深海直达波区的声线到达结构,分析了大深度接收时深海直达波区复声强的特点,理论分析与仿真结果表明,利用声场中不同组声线的复声强可以估计声线到达接收点的掠射角.根据在2014年进行的一次深海实验中布放在3146 m深处的矢量水听器获取的实验信号,利用直达波和海面反射波的复声强估计了直达声线与海面反射声线到达接收矢量水听器处的掠射角,结果表明,估计的声线到达角与理论计算结果基本一致.     

匹配垂直质点振速的浅海地声参数反演

海底声学参数对海洋波导中的声场特性研究和相关应用具有重要意义。针对一次夏季黄海声传播实验,分析了浅海负跃层环境下垂直质点振速的传播特性和简正波结构,说明当声源和接收器均位于负跃层下时,除海底附近外的大部分深度上垂直质点振速能量较高,且与声压相比,号数高的简正波对垂直质点振速的贡献更大,利用垂直质点振速进行匹配场反演能获得更高的海底参数敏感性。分析了海底吸收系数对垂直质点振速匹配场反演的影响,结果表明只有当进行匹配场反演时设置的海底吸收系数接近真实值时,才能获得准确的海底声速、密度和海深反演结果。利用实验中矢量水听器获取的垂直质点振速信号进行匹配场反演,将海底吸收系数在变化范围内取不同值对海底声速、密度和平均海深进行全局搜索,根据代价函数值最大确定了海底声速、密度及平均海深的反演结果,并利用不同距离上的声压传播损失反演出不同频率下的海底吸收系数。根据反演得到的海底声学参数计算声压传播损失,与实验中声压水听器测量结果符合较好。     

浅海波导中目标散射的简正波-Kirchhoff近似混合方法

提出了计算浅海波导中复杂目标散射的数值方法:简正波-Kirchhoff近似混合方法。通过把目标散射的Kirchhoff近似方法和简正波声传播模型相结合,可对大尺寸复杂目标在浅海波导中的散射声场进行计算。以浅海波导中刚性球体散射的解析解为标准解验证了本方法,说明简正波-Kirchhoff近似混合方法是有一定计算精度的工程预报方法。数值计算Pekeris浅海波导中球体目标散射声场在深度-频率平面和距离-频率平面上的二维干涉结构及其与自由空间中的差异。进而通过FFT获得目标时域回波随深度的分布图,分析浅海波导中目标姿态、声速剖面对Benchmark潜艇目标散射的影响。      

浅海舰船噪声声强流的垂直方向性

浅海环境中,确定性声源的多途声信号干涉使得接收点处声强流的方向发生改变,不再与声源位置处的声强流方向一致。只测量声场的标量声强时,无法得到接收点处声强流的垂直方向性,而基于简正波矢量场建模和仿真,可获得理想条件下宽带点声源激发声场声强流的垂直方向性。本文采用单矢量水听器进行海上实验,获得了海洋环境噪声和干扰条件下舰船噪声声强流的垂直方向性。仿真和实验结果表明:远场条件下,浅海干涉现象引起接收点处声强流的方向(极角)随频率和距离变化,其时间-频率分布呈现与LOFAR谱干涉条纹相似的条纹,声强流的极角值主要分布在70?～110?范围内。     

浅海波导中目标回声计算的射线声学方法

建立一种基于虚源法和物理声学方法计算浅海波导中目标回声的射线声学方法。入射声线经过两个界面的多次反射有无限多条,每条入射声线由目标反射后又会产生无限多条到达接收点的声线。将各种组合的散射声场求和得到总的回波声场。用射线声学方法计算了Pekeris波导中半径10 m的绝对软球的回声随距离的变化。与已有文献中波动声学方法的计算结果对比,两者在平均值和下降趋势上符合。计算表明,波导中球和一些圆形目标的等效目标强度(ETS)与自由空间中目标强度(TS)差别很小。而像圆锥形这类目标的等效目标强度与自由空间中目标强度差别较大,导致传统的声呐方程误差较大。与波动声学方法相比,射线声学方法不但具有明确的物理意义,而且可以对浅海信道中复杂形状目标回声进行计算。      

浅海复杂环境下等效声速剖面的构建方法*

针对浅海复杂环境声速剖面水平变化情况下的声传播损失预报及目标定位问题,提出了一种基于遗传算法的等效声速剖面重构算法。首先,将声速剖面进行时间和空间上的分解,从而将声速剖面抽象为对声速剖面前三阶正交函数系数的反演;其次,利用遗传算法,以先验声速剖面集为基础,进行参数反演。仿真结果表明,在浅海复杂条件下,传播损失预报受声速剖面及海洋参数的影响,不能直接运用接收或发射位置处的声速剖面进行传播损失预报,否则会对预报结果造成误差。通过构建具有声传播累积效应的等效声速剖面可以提高匹配场定位精度,完成目标定位,且在构建等效声速剖面时,接收位置处即本地声速剖面所占权重较大。     

虚拟源阵估计浅海目标噪声源强度

针对浅海目标噪声源强度测量估计受波导影响产生偏离的问题,提出一种虚拟垂直源阵浅海目标噪声源强度估计方法,通过被测目标噪声源在浅海波导中移动形成虚拟垂直源阵,利用简正波特征函数的正交性,消除浅海目标噪声场的干涉,以及声源和接收点深度对声源强度测量的影响,获取了更为接近自由场测量的目标噪声源强度估计。理论分析和数值仿真表明,浅海波导中采用本方法测量估计得到的目标噪声源自由场强度和预设真实值相近,同一噪声源在不同浅海波导测量估计结果相同。仿真结果证实了方法的可行性,并显示:南海某实际波导中, 100 Hz以上频段目标噪声源强度估计和真实值相差小于0.5 dB, 40 Hz至100 Hz频段,相差小于1.0 dB, 20 Hz误差约为3.0 dB; 30 Hz以上频段,同一源4种波导环境中测量估计值的标准差小于0.5 dB。文中还就所提方法的主要误差来源以及导致低频段误差增大的原因进行了理论分析和仿真。文中所提虚拟源阵方法,为提高水中目标噪声源强度的测量估计精度提供了一种思路,并可为波导参数的准确反演估计提供参考。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.