镧和铕与邻菲罗啉谷氨酸配合物的NMR和IR研究

合成了稀土镧和铕与谷氨酸，邻菲罗啉形成的二元及三元配合物，经元素分析确定该配合物的组成为Ｌｎ（ｐｈｅｎ）（Ｇｌｕ）３．７Ｈ２Ｏ（Ｌｎ＝Ｌａ，Ｅｕ）；Ｅｕ（Ｇｌｕ）３；１２Ｈ２Ｏ。用核磁共振和红外光谱研究与配体与稀土离子的配位方式，讨论了稀土离子的顺磁性及屏蔽效应对配合物的ＮＭＲ谱图的影响。     

Time domain finite volume method for the transient response and natural characteristics of structural-acoustic coupling in an enclosed cavity

A time domain finite volume method（TDFVM）based on wave theory is developed to analyze the transient response and natural characteristics of structural-acoustic coupling problems in an enclosed cavity.In the present method,the elastic dynamic equations and acoustic equation in heterogeneous medium are solved in solid domains and fluid domains respectively.The structural-acoustic coupling is implemented according to the continuity condition of the particle velocity along the normal direction and the normal traction equilibrium condition on the interface.Several numerical examples are presented to validate the effectiveness and accuracy of the present TDFVM.Then the effects of water depth on the acoustic and vibration characteristics and the natural characteristics of a structural-acoustic coupling system are analyzed.The numerical results show that the increase of water depth leads to a stronger coupling between the water and structure and the decrease of natural frequencies of coupling system,The computational cost and memory of this method are small and it can be applicable to structural-acoustic coupling problems in the heterogeneous fluid.     

Modeling Gain Dynamics in EDFAs: Space-Resolved Versus Lumped Models

We present a detailed comparison of dynamic space- and frequency-resolved and lumped erbium-doped fiber amplifier (EDFA) models. The space- and frequency-resolved models are based on an iterative solution of propagation equations for pump, multiple signals, and spectral components of forward and backward propagating amplified spontaneous powers and rate equations for pump, metastable, and ground energy level population densities of erbium ion. In contrast to space-resolved models, the lumped model solves a single ordinary differential equation for time evolution of the length-averaged metastable level population and is therefore substantially less computer time consuming. Both the space, and frequency-resolved and the lumped models give almost identical results when used for an analysis of surviving channel power excursions in concatenated EDFAs fed by multiwavelength signal and add/drop scenarios. For a statistical analysis of output power and signal-tonoise ratio fluctuations in EDFA cascades fed by burst-mode packet traffic, only lumped models can be used.     

Design and simulation of the wire scanner for the injector linac of BEPC Ⅱ

BEPC Ⅱ,the upgrade project of Beijing Electron Positron Collider (BEPC),is an accelerator with large beam current and high luminosity,so an efficient and stable injector is required.Several beam diagnostic and monitoring instruments are used.A new diagnostic instrument--wire scanner,has been designed and will be used to nleasure the profile of the linac beam of BEPC Ⅱ.This paper describes the prototype of this system and the cause of heat generating of the wire.Some simulation results of the heat and force by using finite element method software-ANSYS(R),2) are presented and discussed.     

陕北侏罗纪富镜煤和富惰煤分子结构的FTIR，XPS和13C NMR表征

侏罗纪优质煤炭资源为煤制油、制气等清洁高效利用提供了丰富的物质基础,其显微组分以富集惰质组为特征,而镜质组与惰质组大分子结构在很大程度上决定了煤的物理化学性质和工艺性能,进而决定了煤炭资源的综合利用效率及附加值。采集并制备了陕北侏罗纪煤田小保当煤矿和柠条塔煤矿的原煤(XR)、富镜质组煤(XV、NV)和富惰质组煤(XI、NI)样品,利用傅里叶变换红外光谱(FTIR)、X射线光电子能谱(XPS)、固体13C核磁共振谱(13C NMR)等手段,结合煤质分析结果,定量表征了不同显微组分富集物分子结构的差异。研究结果表明：XI和NI煤中芳烃结构芳环取代程度低,主要以3个相邻、4~5个相邻的氢原子形式存在,苯环上氢原子较少被其他官能团取代,同时其结构中芳烃C═C骨架振动明显,脂肪结构中亚甲基伸缩振动强度较低,并且甲基含量略高于富镜煤,C═O基团相对含量略高,表明富惰煤有较多含氧桥键相连的芳香结构,其结构中脂族链、脂环基团脱落、断裂以及芳烃富集,支链相对较少且长度较短,芳碳率、芳香度、芳环缩合程度及成熟度较高。XV和NV煤中表面结构中碳的赋存形态“C—C,C—H”,“C—O”的相对含量高于富惰煤,反映其结构中应含较多的芳环取代的脂肪族侧链,XI和NI煤表面结构中氧的赋存形态以“C—O”为主,“C═O”和“COO—”明显高于富镜煤。XV和XI煤的芳碳率分别为57.91%和66.02%,脂甲基碳分别为10.02%和7.84%,质子化芳碳为非质子化芳碳的两倍,XV煤的羰基和羧基碳相对含量较高,两者桥碳和周碳之比分别为0.25和0.40,芳香核结构平均缩合环数分别为2.68和3.03,平均尺寸分别为0.448和0.676 nm,XI煤结构中芳香核以萘和蒽为主,支链化度L_γ分别为0.22和0.19,表明XV比XI存在较多脂肪侧链、饱和环结构,生烃(油)潜力大。     

Isotopes to assess sustainability of overexploited groundwater in the Souss–Massa system (Morocco)

Groundwater depletion and changes in isotopic and chemical contents constitute the main indicators of overexploitation, recharge, and flow paths in the Souss–Massa aquifer. These indicators highlight processes concerning sustainability of water resources in the aquifer (e.g. surface/groundwater interaction, recharge processes, and marine intrusion). The spatial variation of stable and radioactive isotopic contents indicates a mixing of modern and old water within the system. Recent recharge was observed mainly along the Souss River (the major surface-water drainage in the study area) and in the irrigated areas. Mapping of chemical and isotopic variation shows that the area is affected by abstraction, irrigation water return, and the evolution of modern recharge in time and space. The processes, distribution, and timing of groundwater flow are influenced by short- and long-term effects; long-term recharge is dependent on climatic conditions. This study can be used to make informed decisions about water-resource allocation and alternative management practices.     

利用ICP-AES分析大豆体内Mn和Zn分配及收支平衡

长期定位试验和ICP-AES测试相结合,研究了下辽河平原土壤有效Mn和Zn浓度变化以及不同施肥制度下大豆体内Mn和Zn浓度与含量的变化。结果表明：下辽河平原土壤有效Zn浓度已濒临临界值,应加强对其监测;大豆籽实和秸秆体内Zn浓度受施肥影响变化较小;而籽实中Mn浓度受施肥影响变化较大,且NPK和NPKO处理显著高于O和CK处理;养分循环再利用在增加大豆生物量的同时,Mn和Zn携出亦呈增加趋势;土壤-作物系统中,Mn和Zn均出现收支赤字,其赤字大小顺序为NPKO＜O＜CK＜NPK,表明养分循环可以显著减缓这种赤字,使生态系统更可持续。     

基于多光谱图像分析的温室黄瓜叶片营养元素检测与诊断

采用CCD照相机加滤光片的方法,进行了基于多光谱图像分析的温室黄瓜叶片营养元素检测与诊断研究。对近红外光波段的叶片图像分别采用遗传算法和分水岭算法进行阈值选取,对两种算法二值化的效果进行对比分析,结果表明采用分水岭方法分割的图像,边界清晰,噪音小,与原图像更接近,背景和叶片分离的效果更好。NDVI与叶面积、叶片含氮量之间有明显的线性关系,R2分别为： 0.820 9和0.701 7。GNDVI与叶面积、叶片的含氮量之间也有较高的线性关系,R2分别为： 0.762 5和0.676 2。RVI与叶面积之间有明显的线性相关关系,R2为0.857 7,但与叶片的含氮量之间则包含了非线性成分,R2为0.598 8。以上结果表明,CCD照相机加滤光片可以作为一种作物含氮量信息的快速诊断方法。     

Sonoproduction of nanobiomaterials – A critical review

Ultrasound (US) demonstrates remarkable potential in synthesising nanomaterials, particularly nanobiomaterials targeted towards biomedical applications. This review briefly introduces existing top-down and bottom-up approaches for nanomaterials synthesis and their corresponding synthesis mechanisms, followed by the expounding of US-driven nanomaterials synthesis. Subsequently, the pros and cons of sono-nanotechnology and its advances in the synthesis of nanobiomaterials are drawn based on recent works. US-synthesised nanobiomaterials have improved properties and performance over conventional synthesis methods and most essentially eliminate the need for harsh and expensive chemicals. The sonoproduction of different classes and types of nanobiomaterials such as metal and superparamagnetic nanoparticles (NPs), lipid- and carbohydrate-based NPs, protein microspheres, microgels and other nanocomposites are broadly categorised based on the physical and/or chemical effects induced by US. This review ends on a good note and recognises US-driven synthesis as a pragmatic solution to satisfy the growing demand for nanobiomaterials, nonetheless some technical challenges are highlighted.     

Comparison between formulas of rotational band for axially symmetric deformed nuclei

The experimental rotational spectra of the deformed nuclei available in even-even and odd-A nuclei in the rare-earth and actinide regions are systematically analyzed with several rotational spectra formulas,including Bohr-Mottelson's I(I+l)-expansion,Harris'w2-expansion,ab and abc formulas.It is shown that the simple 2-parameter ab formula is much better than the widely used 2-parameter Bohr-Mottelson's AB formula and Harris'αβ formula.The available data of the rotational spectra of both ground-state band in even-even nuclei and one-quaasiparticle band in odd-A nuclei can be conveniently and rather accurately reproduced by ab formula and abc formula.The moment of inertia and the variation with rotational frequency of angular momentum can be satisfactorily reproduced by ab and abc formulas.     

近红外光谱技术在葡萄及其制品品质检测中的应用研究进展

葡萄具有丰富的营养价值、药用价值和经济价值,是世界上种植面积最大的水果之一。根据人们的消费需求及产品的贮运要求,葡萄被加工成葡萄干、葡萄汁、葡萄酒、葡萄籽油等常见葡萄制品。基于食品质量安全的关注以及高品质果蔬农产品的需求,如何快速有效地评价葡萄及其制品的质量已成为当务之急。随着无损检测技术及装备的快速发展,近红外光谱（NIR）技术因其快速、无损、精确、经济及便于在线分析的优点,也逐渐被应用在果蔬等农产品质量品质检测领域。近年来,国内外学者利用NIR技术在不损坏被检测葡萄及其制品的前提下,结合化学计量法、主成分聚类分析（PCA）、偏最小二乘判别分析（PLS-DA）、主成分回归（PCR）、偏最小二乘回归（PLSR）、支持向量机（SVM）及神经网络（NN）等数据处理方法探究了糖、酒精、酸等一般成分及色素、单宁、芳香物质等特有成分含量与有效光谱信息的关联性,以此建立了葡萄及其制品主要品质指标的定性鉴别与定量分析模型,为便携式近红外葡萄品质检测设备的研制和在线葡萄汁、葡萄酒酿制过程监测系统的开发提供了一定技术支持。文章系统概述了近十年来国内外NIR技术在葡萄、葡萄酒、葡萄汁及葡萄副产物检测中的应用现状,旨在为葡萄及其制品在后续分类鉴定与品质评价研究方面提供参考。研究表明NIR技术通过定量定性分析可实现葡萄复杂理化成分的多组分检测和分类鉴别,在测定葡萄理化特性与内部品质方面的研究已经有了一定的进展,且在葡萄酒、葡萄汁的品质过程监测和定性鉴别方面的研究应用逐渐增多,并逐步应用于葡萄皮中多酚、花青素等葡萄副产物分析,以及葡萄藤、葡萄叶营养生长状况监测等其他方面,进一步证实了NIR技术正成为检测葡萄及其制品品质的一种有效工具,为进一步提高葡萄及其制品品质价值以及实现葡萄果园的实时、高效生产管理提供了技术支持,应用前景极为广泛。如何深入挖掘葡萄及葡萄制品不同类检测数据所反映信息的内在关联性,结合视觉、味觉、嗅觉等多源信息融合技术建立预测精确度更高、更稳健的模型去全面评价葡萄生产、果园管理、成熟期收获及产后加工全过程,实现对葡萄及其制品生产全过程质量控制和在线监测将成为今后的发展趋势。     

火焰原子吸收光谱法测定磁化杯中铅、镉和铁

本文研究了火焰原子吸收光谱法测定磁化杯陶瓷内胆中Ｐｈ、Ｃｄ和Ｆｅ含量的方法。样品经粉碎，用硝酸－高氯酸混合液进行消解后测定。本法灵敏度高，干扰少，简单，快速，具有良好的精密度和准确度，其相对标准偏差分别为Ｐｂ３．９９％，Ｃｄ１０．７％，Ｆｅ０．９％。回收率Ｐｂ１００．６１％，Ｃｄ１０１．１８％，Ｆｅ１０２．４％。     

Airborne Nanostructured Particles and Occupational Health

Nanotechnology is leading to the development in many field, of new materials and devices in many fields that demonstrate nanostructure-dependent properties. However, concern has been expressed that these same properties may present unique challenges to addressing potential health impact. Airborne particles associated with engineered nanomaterials are of particular concern, as they can readily enter the body through inhalation. Research into the potential occupational health risks associated with inhaling engineered nanostructured particles is just beginning. However, there is a large body of data on occupational and environmental aerosols, which is applicable to developing an initial assessment of potential risk and risk reduction strategies. Epidemiological and pathological studies of occupational and environmental exposures to airborne particles and fibers provide information on the aerosol-related lung diseases and conditions that have been observed in humans. Toxicological studies provide information on the specific disease mechanisms, dose–response relationships, and the particle characteristics that influence toxicity, including the size, surface area, chemistry or reactivity, solubility, and shape. Potential health risk will depend on the magnitude and nature of exposures to airborne nanostructured particles, and on the release, dispersion, transformation and control of materials in the workplace. Aerosol control methods have not been well-characterized for nanometer diameter particles, although theory and limited experimental data indicate that conventional ventilation, engineering control and filtration approaches should be applicable in many situations. Current information supports the development of preliminary guiding principles on working with engineered nanomaterials. However critical research questions remain to be answered before the potential health risk of airborne nanostructured particles in the workplace can be fully addressed. Disclaimer The findings and conclusions in this report are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health     

Carrier frequency offset and impulse noise estimation for underwater acoustic orthogonal frequency division multiplexing

The carrier frequency offset（CFO）and impulse noise always affect the performance of underwater acoustic communication_systems.The CFO and impulse noise could be estimated by using the null subcarriers to cancel the effects of the two types of interference.The null subcarriers estimation methods include optimal separate estimation and joint estimation.The separate estimation firstly estimates the CFO value and then estimates the impulse noise value.However,the CFO and impulse noise always affect each other when either of them is estimated separately.The performance could be improved by using the joint estimation.The results of simulations and experiments have showed that these two optimization methods have good performance and the joint estimation has better performance than the separate estimation method.There is 3 dB performance gain at the BER value of 10~（-2）when using the joint estimation method.Thus these methods could improve the system robustness by using the CFO compensation and impulse noise suppression.     

NIR Spectroscopy and Imaging Techniques for Evaluation of Fish Quality—A Review

Abstract

Fish is a highly perishable product and it is particularly important to pay attention to its quality changes. Maintenance of the high quality of fish and fishery products necessitates development of means for precise and rapid quality evaluation. Near-infrared (NIR) spectroscopy and imaging techniques are proven technologies that can provide useful information for the estimation of quality attributes in fish and fishery products due to fast speed, noninvasiveness, ease of use, and minimal sample preparation. The aim of this review is to communicate perspectives and aspects relating to NIR spectroscopy and imaging techniques with regard to evaluation of chemical composition (fat, protein, and moisture), microbiological (freshness, spoilage, and nematodes), and sensory (flavor, texture, and color) attributes of fish and fishery products. Moreover, the usefulness of NIR spectroscopy and imaging techniques for fish authentication and classification are presented. Finally, some viewpoints on the current situation and suggestions for future research directions are proposed.     

二阶导数荧光分光光度法同时测定色氨酸和酷氨酸

本文描述了用二阶导数荧光光度法同时测定色氨酸和酪氨酸。在 p H 7.4的条件下 ,用 2 2 1nm作为激发波长 ,记录色氨酸和酪氨酸的发射光谱 ,并进行二阶导数处理。色氨酸在 318nm处 ,酪氨酸在 2 83nm处 ,二阶导数峰高与浓度成线性关系。色氨酸工作曲线的线性回归方程为 c =0 .0 0 0 7H - 0 .0 0 4,r =0 .996 4,线性范围为 0 .0 0 4到 0 .2 0 0μg . m L- 1 。酪氨酸工作曲线的线性回归方程为 c =0 .0 0 12 H -0 .0 0 40 ,r=0 .9971。线性范围为 0 .0 0 2到 0 .2 5 0 μg· m L- 1 。实验了 p H、温度和干扰离子对测定的影响 ,测定了苹果中的色氨酸和酪氨酸的含量 ,回收率分别为 (92 .0～ 10 4.0 ) %和 (98.70～ 10 2 .0 ) % ,相对标准偏差分别为 3.5 %和 2 .8%。     

Astrophysical combustion

There are three main astrophysical combustion systems: the evolution of stars, formation of interstellar dust and particulates, and the transition to hadrons in the early universe. These are described in terms of general combustion concepts, such as ignition, laminar and turbulent flames, detonations, multiphase flows, and particle and soot formation. Viewed in this way, the universe and many of its most important astronomical components are combustion systems, and we should use these as naturally occurring laboratories for exploring new and familiar combustion regimes. A more detailed discussion focuses on one type of combustion system, the ignition and development of turbulent flames in Type Ia supernovae, and the importance of the transition to a detonation.     

Effect of trabecular bone material properties on ultrasonic backscattering signals

In this study, ultrasonic backscattering signals in cancellous bones were obtained by finite difference time domain （FDTD） simulations, and the effect of trabecular material properties on these signals was analyzed. The backscatter coefficient （BSC） and integrated backscatter coefficient （IBC） were numerically investigated for varying trabecular bone material properties, including density, Lame coefficients, viscosities, and resistance coefficients. The results show that the BSC is a complex function of trabecular bone density, and the IBC increases as density increases. The BSC and IBC increase with the first and second Lame coefficients. While not very sensitive to the second viscosity of the trabeculae, the BSC and IBC decrease as the first viscosity and resistance coefficients increase. The results demonstrate that, in addition to bone mineral density （BMD） and microarchitecture, trabecular material properties significantly influence ultrasonic backseattering signals in cancellous bones. This research furthers the understanding of ultrasonic backscattering in cancellous bones and the characterization of cancellous bone status.     

两种木塑复合材料的识别及主要组分的定量分析

不同塑料基体木塑复合材料（WPC）的识别及主要组分的定量分析对于废弃WPC产品的分类回收、高效再利用,以及产品生产过程中的质量控制、产品销售和使用过程中规范市场秩序和维护消费者合法权益,具有重要意义。建立不同塑料基体WPC的主要组分的通用定量分析模型,有助于降低检测成本,扩大模型的适用范围。然而。目前国内外关于不同塑料基体的WPC定性识别研究,尚未与WPC主要组分的定量分析相联系,未能构建完整的技术体系。WPC主要组分定量分析研究尚局限在单一塑料基体WPC的定量分析模型。针对此种情况,分别以聚乙烯（PE）和聚丙烯（PP）为增强体,杉木为生物质填料,加入一定量的添加剂后,采用挤出成型法分别制备了20个不同杉木/PE配比和20个不同杉木/PP配比的WPC样品。采用溴化钾压片法获取了40个WPC样品的红外光谱,利用多变量统计软件对光谱数据先进行一阶导数处理,再进行变量标准化。利用主成分分析法（PCA）对杉木/PE和杉木/PP两种复合材料进行了分类,由于PP和PE化学结构的差异明显,两种复合材料在二维主成分空间中呈带状分布,每种WPC样品处于相对独立空间,分类正确率达100%。利用偏最小二乘法（PLS）建立了两种复合材料通用定量分析模型,木粉和塑料的校正模型的决定系数R2分别为0.984和0.985,校正标准偏差SEC分别为1.034%和1.206%;木粉和塑料的预测模型的R2均为0.956,交互验证标准偏差SECV分别为1.779%和1.792%;RPD值分别为4.83和4.85。为更客观准确地检验模型的预测能力,随机选取10个样品对所建通用定量分析模型进行外部验证。结果显示,模型预测准确性高,木粉含量的预测相对偏差在±8%以内,塑料含量的预测相对偏差在±7%以内。建立了一套PE基和PP基WPC快速准确的识别方法和通用定量分析模型,为红外光谱法应用于WPC生产、质检及回收再利用过程中的定性识别和定量分析奠定了技术基础。     

Orthogonal M-ary code shift keying spread spectrum underwater acoustic communication

M-ary and code shift keying（CSK）spread spectrum is generally applied to overcoming the spreading gain versus data rate limitation in underwater acoustic（UWA）communications.In addition,the concept of orthogonal M-ary CSK is introduced to UWA communication to gain higher rates.We propose a scheme employing dual-orthogonal-channel M-ary and CSK spread spectrum UWA communication based on Gold sequences owing large code set and good self and cross correlation.The modulation and demodulation scheme of the orthogonal M-ary CSK is derived algebraically and the factors critical to its performance are discussed.Furthermore,its bit error rate（BER）curve is evaluated via simulations and compared with the dual-channel M-ary CSK.Finally,the validity of the simulations is verified in tank experiments.1096.8 bps data rate of the proposed communication scheme is realized for 10 kbits data volume with no error.Overall through deduction,numerical simulation,and experiment,it is shown that the proposed method offers significantly improved performance.