采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究（英文）

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系.研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在.对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在.而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在.研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

CO在Pd掺杂Rh(111)表面吸附的理论研究

采用密度泛函理论与周期性平板模型相结合的方法,对CO在Rh(111)表面top、fcc、hcp、bridge四个吸附位和Rh-Pd(111)表面Rh-top、Pd-top、Rh Rh-bridge、Rh Pd-bridge、Pd Pd-bridge、Rh2Pdhcp、Rh Pd2-hcp、Rh2Pd-fcc、Rh Pd2-fcc九个吸附位的13种吸附模型进行了构型优化、能量计算,得到了CO较有利的吸附位;并对最佳吸附位进行总态密度分析.结果表明:CO在Rh(111)和Rh-Pd(111)表面的最稳定吸附位分别为Rh-hcp和Rh-top位,其吸附能的大小顺序为Ph(111)Rh-Pt(111);CO与金属表面成键,属于化学吸附.     

Al吸附在Pt,Ir和Au的(111)面的低覆盖度研究

应用密度泛函理论,系统研究了Al原子在Pt(111),Ir(111)和Au(111)表面的桥位、顶位、三重面心立方(fcc)洞位和六角密排(hcp)洞位这四个典型位置的吸附情况. 主要计算了三吸附体系的几何结构、平均结合能和差分电荷密度,并系统讨论了相关原子的密立根电荷布居数和投影态密度.研究发现,对于Pt(111)和Ir(111)表面,Al原子在hcp洞位最稳定,但是对于Au(111)表面,Al原子在fcc洞位最稳定. 关键词： 吸附 密度泛函理论 结合能 电子结构     

交换关联泛函近似方法对Ru催化剂上甲烷和乙烷形成的影响

密度泛函理论作为多相催化研究中的一个强有力工具,常被用于获得催化过程中关键的热力学及动力学参数,如吸附能、反应焓、活化能垒和速率常数等. 理解密度泛函交换关联近似方法对于揭示催化剂的催化性能及机理至关重要. 本文报道了六种不同的交换关联泛函近似方法,包括PBE、RPBE、BEEF+vdW、optB86b+vdW、SCAN和SCAN+rVV10,对金属Ru(0001)和Ru(1011)表面上甲烷和乙烷形成过程中涉及到的中间体的吸附能、反应能和活化能垒的影响. 当基元反应中反应物和产物与表面的配位数不同时,理论计算的反应能大小强烈依赖于交换关联密度泛函的选择. 对于涉及多个基元步骤的总反应,反应能的计算偏差会逐渐累积,从而导致不同的交换关联泛函近似方法之间的巨大差异. 由于不同泛函对反应涉及到的中间体吸附能之间存在差异,交换关联泛函近似方法的选择显著地影响Ru(0001)表面上甲烷、乙烯和乙烷的选择性. 然而,不同泛函近似方法对于Ru(0001) 和Ru(1011)表面上基元反应的能垒以及结构敏感性影响不大. 本工作不仅揭示了交换关联密度泛函近似方法在理论计算研究催化领域的局限性,也强调了选择合适的交换关联泛函方法对于正确评估催化剂活性和选择性的重要性.     

钴原子及其团簇在Rh(111)和Pd(111)表面的扫描隧道显微学研究

利用扫描隧道显微镜和扫描隧道谱(STM/STS)及单原子操纵,系统研究了单个钴原子(Co) 及其团簇在Rh (111)和Pd (111)两种表面的吸附和自旋电子输运性质. 发现单个Co原子在Rh (111)上有两种不同的稳定吸附位,分别对应于hcp和fcc空位, 他们的高度明显不同,在针尖的操纵下单个Co原子可以在两种吸附位之间相互转化. 在这两种吸附位的单个Co原子的STS谱的费米面附近都存在很显著的峰形结构, 经分析认为Rh (111)表面单个Co原子处于混价区,因此这一峰结构是d轨道共振 和近藤共振共同作用的结果.对于Rh (111)表面上的Co原子二聚体和三聚体, 其费米面附近没有观测到显著的峰,这可能是由于原子间磁交换相互作用 和原子间轨道杂化引起的体系态密度改变所共同导致.与Rh (111)表面不同, 在Pd (111)表面吸附的单个Co原子则表现出均一的高度.并且对于Pd (111)表面所有 单个Co原子及其二聚体和三聚体,在其STS谱的费米面附近均未探测到显著的电子结构, 表明Co原子吸附于Pd (111)表面具有与Rh (111)表面上不同的原子-衬底相互作用与自旋电子输运性质.     

C_2H_x(x=4～6)在Ni(111)表面吸附的DFT研究

采用密度泛函理论与周期平板模型相结合的方法,对物种C_2H_x(x=4～6)在Ni(111)表面的top,fcc,hcp和bridge位的吸附模型进行了结构优化、能量计算,得到了各物种较有利的吸附位;并对最佳吸附位进行密立根电荷和总态密度分析.结果表明:C_2H_6和C_2H_4在Ni(111)表面的最稳定吸附位都是top位,吸附能分别是-36.41和-48.62 kJ·mol~(-1),物种与金属表面吸附较弱;而C_2H_5在Ni(111)表面的最稳定吸附位hcp的吸附能是-100.21 kJ·mol~(-1),物种与金属表面较强;三物种与金属表面之间都有电荷转移,属于化学吸附.     

Rh在CeO_2(111)表面吸附的第一性原理研究

采用基于广义梯度近似的投影缀加平面波(Projector augmented wave)赝势和具有三维周期性边界条件的超晶胞模型,用第一原理计算方法,计算并分析了Rh在CeO_2(111)表面吸附所形成的Rh/CeO_2(111)界面体系的吸附能,价键结构和局域电子结构.考虑了Rh在不同吸附位置的吸附情况.结果表明:1)Rh在CeO_2(111)面有较大的吸附能,表明Rh与CeO_2(111)面有较强的相互作用,而且Rh在位于表面O的三度位,且位于次层氧的顶位的吸附最强;2)Rh的4d态同衬底O的2p态有明显的杂化作用,这是Rh同CeO_2较强作用的主要原因;3)Rh被CeO_2(主要是Rh的次近邻的Ce)氧化为Rh~(3+),并伴随着Ce~(4+)→Ce~(3+)反应的发生.     

甲基和羟基在Ir(111)表面吸附的密度泛函理论研究

在超原胞近似和slab模型基础上,采用周期性密度泛函理论,在0.11覆盖度(ML)下,对甲基与羟基在Ir(111)表面的吸附进行了研究,得到了甲基和羟基在Ir(111)表面不同吸附位置的吸附能和吸附构型,计算了它们的振动频率,同时分析了甲基和羟基共吸附于Ir(111)表面的情况.结果表明,甲基和羟基在Ir(111)表面的最稳定吸附位置都是top位,甲基是碳端向下吸附,羟基是通过氧端向下倾斜吸附.通过频率分析发现吸附后CH3中C-H键的对称伸缩振动、反对称伸缩振动以及剪切振动频率均发生了红移,而羟基中的O-H键的振动频率发生蓝移现象.通过计算对比发现甲醇分解为甲基和羟基过程是一个放热反应,从热力学角度来说该反应是可行的.     

Benchmarking PBE+D3 and SCAN+rVV10 methods using potential energy surfaces generated with MP2+?CCSD(T) calculation

We develop a benchmark system for van der Waals interactions obtained with MP2+?CCSD(T) method at complete basis set limit. With this benchmark, we examine the widely used PBE+D3 method and recently developed SCAN+rVV10 method for density functional theory calculations. Our benchmark is based on two molecules: glycine(or Gly, an amino acid) and uracil(or U, an RNA base). We consider six dimer configurations of the two monomers and their potential energy surfaces as a function of relative distance and rotation angle. The Gly-Gly, Gly-U, and U-U pairs represent London dispersion, hydrogen bonding, and π–π stacking interactions, respectively. Our results show that both PBE+D3 and SCAN+rVV10 methods can yield accuracy better than 1 kcal/mol, except for the cases when the distance between the two monomers is significantly smaller than the equilibrium distance. In such a case, neither of these methods can yield uniformly accurate results for all the configurations. In addition, it is found that the SCAN and SCAN+rVV10 methods can reproduce some subtle features in a rotational potential energy curve, while the PBE, PBE+D3, and the local density approximation fail.     

金刚石延(111)面生长的第一性原理研究

利用密度泛函理论(DFT)对碳原子在镍(111)表面吸附结构进行了计算，得到了吸附能以及态密度 (density of state, DOS)分布，分析了吸附在镍(111)面的碳原子和金刚石(111)面的碳原子的分波态密度(PDOS)，结果表明吸附在镍表面的碳原子具有与金刚石表面碳原子相类似的电子结构特点，即两者都存在孤对的和成键的sp³杂化电子,进而发现吸附在镍表面的碳原子极易与金刚石表面相互作用形成稳定的类金刚石几何结构. 关键词： 密度泛函理论 化学吸附 电子结构 金刚石生长     

Comparison study of exchange-correlation functionals on prediction of ground states and structural properties

Despite significant advances in first-principles calculation methods, there is no single exchange-correlation functional which predicts the ground state of materials without an error yet. We investigated how accurately ground states of binary semiconductors are described using 16 exchange-correlation functionals (with or without van der Waals corrections). LDA, PBEsol, SCAN (with or without rVV10 correction), and PBE with D3 van der Waals correction (zero or Becke-Johnson damping) show good predicting power. The lattice constants of stable phases were slightly better described by SCAN, PBEsol, PBE+D3 (Becke-Johnson damping), and MS2. We also propose a set of functionals to double-check the stability of new materials based on the majority vote.     

Ar adsorptions on Al (111) and Ir (111) surfaces: a first-principles study

We investigate the adsorptions of Ar on Al (111) and Ir (111) surfaces at the four high symmetry sites, i.e., top, bridge, fcc- and hcp-hollow sites at the coverage of 0.25 monolayer (ML) using the density functional theory within the generalized gradient approximation of Perdew, Burke and Ernzerhof functions. The geometric structures, the binding energies, the electronic properties of argon atoms adsorbed on Al (111) and Ir (111) surfaces, the difference in electron density between on the Al (111) surface and on the Ir (111) surface and the total density of states are calculated. Our studies indicate that the most stable adsorption site of Ar on the Al (111) surface is found to be the fcc-hollow site for the (2 × 2) structure. The corresponding binding energy of an argon atom at this site is 0.538 eV/Ar atom at a coverage of 0.25 ML. For the Ar adsorption on Ir (111) surface at the same coverage, the most favourable site is the hcp-hollow site, with a corresponding binding energy of 0.493 eV. The total density of states (TDOS) is analysed for Ar adsorption on Al (111) surface and it is concluded that the adsorption behaviour is dominated by the interaction between 3s, 3p orbits of Ar atom and the 3p orbit of the base Al metal and the formation of sp hybrid orbital. For Ar adsorption on Ir (111) surface, the conclusion is that the main interaction in the process of Ar adsorption on Ir (111) surface comes from the 3s and 3p orbits of argon atom and 5d orbit of Ir atom.     

Chemisorptive bonding and reaction of nitric oxide on Ir(100) and Ir(111) surfaces

Chemisorption of nitric oxide on single crystal Ir(111) and Ir(100)?(5 × 1) has been studied by UV-photoelectron spectroscopy, thermal desorption and low energy electron diffraction. At 300 K, partially dissociative adsorption is observed on both surfaces, confirming the borderline location of Ir in the Periodic Table with respect to molecular versus dissociative adsorption. Three different molecular chemisorption phases are distinguished in the UPS spectra through distinctly different 1π-level energies. A skewed orientation associated with a possible rehybridization and bending of the nitrosyl-metal bound for chemisorption on the Ir(111) surface is inferred both from a splitting of the 1π level and from observation of relative intensity variations in photoemission using a polarized photon source.     

铝和银在铱（111）宽范围吸附的稳定性、原子构型及电子特性研究

利用第一性原理密度泛函理论研究了铝和银在铱的111面的宽范围吸附特性。基于密度泛函理论计算了覆盖度在0.11ML到2.00ML的结构稳定性、原子构型及平均结合能。对于铝原子在铱111面的吸附,最稳定的结构是铝原子覆盖度为0.5ML位于密堆六方空位（hcp-hollow）,相应的结合能为-4.68eV;对于亚层铝原子的吸附,最稳定结构是铝原子覆盖度为1.00ML时位于octahedral位置,相应的结合能为-5.28eV。对于覆盖度为2.00ML的满覆盖度混合结构的表层及亚层吸附,最稳定结构是Al位于六方密堆及八方密堆位置,相应的结合能为-4.70eV。这意味着当铝原子以满覆盖度吸附在铱的111面上时,趋向于在铱的111面的亚层形成化学键,而非吸附于表层。相比于铝吸附在铱111面,银的吸附特性呈现出很大的不同,面心位置更为稳定,在覆盖度为0.25ML时其结合能为3.89eV,略微高出密堆六方位置处3.88eV的结合能。     

Adsorption-desorption properties and surface structural chemistry of chlorine on Cu(111) and Ag(111)

The adsorption, desorption, and structural properties of chlorine adlayers on Cu(111) and Ag(111) have been studied by LEED, Auger, Δ?, and thermal desorption measurements. Ancillary experiments were also carried out on cuprous chloride for purposes of comparison with the Cu(111)-Cl data. Chlorine adsorption is rapid on both metals and follows precursor kinetics, the absolute initial sticking probabilities being ~1.0 (Cu) and ~0.5 (Ag). Δ? results suggest that significant depolarisation of the chemisorption bond occurs at high coverages, the maximum values being + 1.2 eV (Cu) and + 1.8 eV (Ag). On Cu(111), adsorption leads to the formation of a sequence of well-ordered phases; in order of increasing coverage, these are as follows: (√3 × √3)R30°, (12√3 × 12√3)R30°, (4√7 × 4√7)R19.2°, and (6√3 × 6√3)R30°. On Ag(111) (√3 × √3)R30°, and (10 × 10) structures are observed. All six structures are susceptible to a straightforward interpretation in terms of coincidence lattices resulting from the progressive uniform compression of a hexagonal layer of Cl atoms. This interpretation is consistent with all the experimental results, and gives values for the nearest-neighbour ClCl spacing on both Cu(111) and Ag(111) which are in good agreement with other work on other surfaces. Chlorine desorbs exclusively as atoms from both metals with first-order desorption kinetics, and apparent desorption energies of 236 (Cu) and 209 (Ag) kJ mol^?1. These values, which depend on an assumed pre-exponential factor of 10¹³ s^?1, are shown to be inconsistent with the thermochemical constraints on the system necessitated by the complete absence of Cl₂ desorption. Lower limits for the pre-exponential factors are then deduced, and the values are found to be consistent with the differences between the CuCl and AgCl systems.     

A DFT study of the transition metal promotion effect on ethylene chemisorption on Co(0 0 0 1)

Transition metals are often introduced to a catalyst as promoters to improve catalytic performance. In this work, we study the promotion effect of transition metals on Co, the preferred catalytic metal for Fischer–Tropsch synthesis because of its good compromise of activity, selectivity and stability, for ethylene chemisorption using density functional theory (DFT) calculations, aiming to provide some insight into improving the α-olefin selectivity. In order to obtain the general trend of influence on ethylene chemisorption, twelve transition metals (Zr, Mn, Re, Ru, Rh, Ir, Ni, Pd, Pt, Cu, Ag and Au) are calculated. We find that the late transition metals (e.g. Pd and Cu) can decrease ethylene chemisorption energy. These results suggest that the addition of the late transition metals may improve α-olefin selectivity. Electronic structure analyses (both charge density distributions and density of states) are also performed and the understanding of calculated results is presented.     

Theoretical calculations of dissociative adsorption of CH4 on an Ir(111) surface

The activation energy for chemisorption of CH(4) at an Ir(111) surface is determined using density functional theory combined with an estimate of the long range dispersion interaction. The results are found to be in good agreement with published results of bulb and beam experiments analyzed with a precursor model. A surprisingly large surface relaxation is found where an Ir surface atom is displaced outwards by as much as 0.6 A. A strongly bound molecular state at kinks and adatoms involving eta(2)-H,H bonding was also found.     

NH_x(x=1～3)在金属Ir表面吸附与解离的第一性原理研究

采用密度泛函理论,在slab模型下,研究了NH_x(x=1~3)在Ir(100)、Ir(111)和Ir(110)表面上的最稳定吸附位置、几何构型以及逐步脱氢分解过程,计算了相应的吸附能和活化能.计算结果表明,在Ir(100)、Ir(111)面上,NH_3是以C_3轴垂直吸附在顶位,在Ir(110)上,NH_3是以N-Ir键与表面成68.6°吸附在顶位,且吸附能依赖于表面的结构而不同,相比而言,NH_3更容易吸附在开放表面Ir(100)、Ir(110)面上,说明NH_3在这些表面的吸附具有结构敏感性.NH_(x(x=1~3))的分解,在Ir(100),NH_3的吸附与分解存在竞争,在Ir(110)面NH_3最容易分解,在Ir(111)面NH_3是分子性吸附,不能分解.NH_2、NH在三个表面均能够分解,在Ir(110)面活化能均较高.