Structural phase diagram for ZnS nanocrystalline thin films under swift heavy ion irradiation

The synthesis of nanocrystalline ZnS thin films by pulsed laser deposition and their modification by swift heavy ions are presented. The irradiations with 150 MeV Ni ions at fluences of 1×10¹¹, 1×10¹² and 1×10¹³ ions/cm² have been used for these studies. Irradiation results in structural phase transformation and bandgap modification of these films are investigated by using X-ray diffraction and UV-visible absorption measurements, respectively. Since stoichiometry changes induced by irradiation can contribute to the modification of these properties, elastic recoil detection analysis has been performed on pristine and 150 MeV Ni ions irradiated ZnS thin films using a 120 MeV Ag ion beam. The stoichiometry of the films has been found to be similar for pristine and ion irradiated samples. A structural phase diagram based on thermal and pressure spikes has been constructed to explain the structural phase transformation.     

Formation of nanocrystalline TiO2 by 100 MeV Au

Nanocrystalline TiO₂ structures are formed by irradiation of 100 MeV Au⁸⁺ ion beam on amorphous thin films of TiO₂. Surface morphology of the nanocrystals is studied by Atomic Force Microscopy (AFM). Amorphous to nanocrystalline phase transformation is identified by Glancing Angle X-ray Diffraction (GAXRD) and Raman spectroscopic studies. Optical characterization is carried out by UV-VIS spectroscopy technique. Blue shift observed in absorption band edge indicates the formation of nanophase TiO₂ after irradiation. The impinging swift heavy ion (100 MeV Au⁸⁺) induces nucleation of nanoparticles along the ion trajectory through inelastic collisions of the projectile with electrons of the material. It is observed that the shape and size of nanoparticles formed is dependant on the irradiation fluence.     

Swift heavy ion irradiation induced modification of BiFeO3 thin films prepared by sol-gel method

We report the preparation of multiferroic BiFeO₃ thin films on ITO coated glass substrates through sol-gel spin coating method followed by thermal annealing and their modification by swift heavy ion (SHI) irradiation. X-ray diffraction and Raman spectroscopy studies revealed amorphous nature of the as deposited films. Rhombohedral crystalline phase of BiFeO₃ evolved on annealing the films at 550°C. Both XRD and Raman studies indicated that SHI irradiation by 200 MeV Au ions result in fragmentation of particles and progressive amorphization with increasing irradiation fluence. The average crystallite size estimated from the XRD line width decreased from 38 nm in pristine sample annealed at 550°C to 29 nm on irradiating these films by 200 MeV Au ions at 1 × 10¹¹ ions cm⁻². Complete amorphization of the rhombohedral BiFeO₃ phase occurs at a fluence of 1 × 10¹² ions.cm⁻². Irradiation by another ion (200 MeV Ag) had the similar effect. For both the ions, the electronic energy loss exceeds the threshold electronic energy loss for creation of amorphized latent tracks in BiFeO₃.     

Substrate effect on electronic sputtering yield in polycrystalline fluoride (LiF, CaF2 and BaF2) thin films

Influence of substrate on electronic sputtering of fluoride (LiF, CaF₂ and BaF₂) thin films, 10 and 100 nm thin, under dense electronic excitation of 120 MeV Ag²⁵⁺ ions irradiation is investigated. The sputtering yield of the films deposited on insulating (glass) and semiconducting (Si) substrates are determined by elastic recoil detection analysis technique. Results revealed that sputtering yield is higher, up to 7.4 × 10⁶ atoms/ion for LiF film on glass substrate, than that is reported for bulk materials/crystals (∼10⁴ atoms/ion), while a lower value of the yield (2.3 × 10⁶ atoms/ion) is observed for film deposited on Si substrate. The increase in the yield for thin films as compared to bulk material is a combined effect of the insulator substrate used for deposition and reduced film dimension. The results are explained in the framework of thermal spike model along with substrate and size effects in thin films. It is also observed that the material with higher band gap showed higher sputtering yield.     

Effect of swift heavy ion irradiation on photoluminescence properties of ZnO/PMMA nanocomposite films

We report a study on the SHI induced modifications on structural and optical properties of ZnO/PMMA nanocomposite films. The ZnO nanoparticles were synthesized by the chemical route using 2-mercaptoethanol as a capping agent. The structure of ZnO nanoparticles was confirmed by XRD, SEM and TEM. These ZnO nanoparticles were dispersed in the PMMA matrix to form ZnO/PMMA nanocomposite films by the solution cast method. These ZnO/PMMA nanocomposite films were then irradiated by swift heavy ion irradiation (Ni⁸⁺ ion beam, 100 MeV) at a fluence of 1×10¹¹ ions/cm². The nanocomposite films were then characterized by XRD, UV-vis absorption spectroscopy and photoluminescence spectroscopy. As revealed from the absorption spectra, absorption edge is not changed by the irradiation but the optical absorption is increased. Enhanced green luminescence at about 527 nm and a less intense blue emission peak around 460 nm were observed after irradiation with respect to the pristine ZnO/PMMA nanocomposite film.     

Engineering of hydrophilic and plasmonic properties of Ag thin film by atom beam irradiation

Hydrophilic Ag nanostructures were synthesized by physical vapour deposition of 5 nm Ag thin films followed by irradiation with 1.5 keV Ar atoms. Optical absorbance measurements show a characteristic surface plasmon resonance absorption band in visible region. A blue-shift in absorbance from 532 to 450 nm is observed with increasing fluence from 1 × 10¹⁶ to 3 × 10¹⁶ atoms/cm². Atomic force microscopy was performed for the pristine and irradiated samples to study the surface morphology. The atom beam irradiation induced sputtering and surface diffusion lead to the formation of plasmonic surface. Rutherford backscattering spectroscopy of the pristine and irradiated film indicates that metal content in the film decreases with ion fluence, which is attributed to the sputtering of Ag by Ar atoms. The contact angle measurement demonstrates the possibility of engineering the hydrophilicity by atom beam irradiation.     

Surface roughness and power spectral density study of SHI irradiated ultra-thin gold films

Quantitative roughness and microstructural analysis of as-deposited and swift heavy ion (SHI) (107 MeV Ag and 58 MeV Ni) irradiated 10 and 20 nm thick Au films were performed by atomic force microscopy (AFM). Power spectral density (PSD) analysis was done from the AFM images. The energies chosen for the two different ions eliminated the velocity effect of SHI in materials modification. The rms roughness estimated from the AFM data did not show either monotonic increase or decrease with ion fluences. Instead, it increased at low fluences and decreased at high fluences for 20 nm thick film. In 10 nm film, the roughness first increased with ion fluence, then decreased and again increased at higher fluences. Though the 10 and 20 nm films exhibited very different patterns of rms roughness variation with ion fluence, the pattern of variation in both cases was identical for Ni and Ag beams. The PSD analysis for both 10 and 20 nm films (pristine and irradiated) showed similar variation of low frequency roughness with ion fluence as that of the rms roughness. In the high frequency regime, PSD analysis suggests that surface morphology of the irradiated samples is governed by the combined effect of evaporation-recondensation and diffusion dominated processes.     

MeV Au ion induced modifications at Co/Si interface

We report on room temperature MeV Au ion induced modifications at the Co/Si interfaces. Nanometers size thin film of Co and Si were grown by ultra high vacuum (UHV) electron beam evaporation technique on Si(1 1 1) surface and were irradiated by 1.5 MeV Au²⁺ ions at a fluence of 5 × 10¹⁴ ions cm⁻². High-resolution transmission electron microscopy (HRTEM) along with energy filter imaging technique has been employed to study the formation of Co-Si alloy at the interface. Formation of such surface alloy has been discussed in the light of ion-matter interaction in nanometer scale regime.     

Luminescence study of SHI irradiated nano semiconductor: Conducting polymer composite

Semiconductor nanoparticle and conducting polymer composite is an interesting class of materials for optoelectronic and photovoltaic device application. We have synthesized a composite of nanocrystalline PbS and conducting polymer MEH-PPV by chemical synthesis and studied the effect of swift heavy ion (SHI) irradiation on the composite material. The irradiation of the composite materials in thin film form is carried out with 120 MeV Si⁺⁹ ion beam at fluences from 5×10¹⁰ to 10¹³ ions/cm². Fluence dependent optical and structural properties have been observed in optical absorption, PL and TEM studies. Reduction of nanoparticle size has been observed after irradiation.     

Ionoluminescence and photoluminescence studies of Ag ion irradiated kyanite

Ionoluminescence (IL) of kyanite single crystals bombarded with 100 MeV swift Ag⁸⁺ ions with fluences in the range 1.87-7.5×10¹¹ ions/cm² has been studied. A pair of sharp IL peaks at ∼689 and 706 nm along with broad emission in the region 710-800 nm are recorded in both crystalline and pelletized samples. Similar results are recorded in Photoluminescence (PL) of pelletized kyanite bombarded with same ions and energy with fluences in the range 1×10¹¹-5×10¹³ ions/cm² with an excitation of 442 nm laser beam. The characteristic pair of sharp emission peaks at 689 and 706 nm in both IL and PL is attributed to luminescence centers activated by Fe²⁺ and Fe³⁺ ions. The reduction in IL and PL bands intensity with increase of ion fluence might be attributed to degradation of Si-O (2ν₃) bonds, present on the surface of the sample.     

Ion beam modification of porous silicon using high energy Au ions and its impact on photoluminescence spectra

This paper presents investigation of impact of high-energy ion-irradiation on properties of light emitting porous silicon (PS) through photoluminescence (PL) spectroscopy. Irradiation was performed with 100 MeV Au⁺⁷ ions from a pelletron accelerator at ion doses in 10¹⁰-10¹⁴ cm⁻² range. The effect was associated with a blueshift (∼40 nm) and an enhancement of the PL intensity, in general. The efficiency and stability of PL with respect to ambients was seen to be relatively improved. The PL properties of PS were found to be stable against low to medium dose irradiation (<10¹³ cm⁻²), whereas, higher dose led to further degradation of the optical properties. The effects have been explained in terms of a decrease in the non-radiative recombination probability of electron-hole pairs due to chemical restructuring of the surface and a reduced crystallite size as a result of irradiation.     

Swift heavy ion induced modifications in cobalt doped ZnO thin films: Structural and optical studies

Modifications in the structural and optical properties of 100 MeV Ni⁷⁺ ions irradiated cobalt doped ZnO thin films (Zn_1−xCo_xO, x = 0.05) prepared by sol-gel route were studied. The films irradiated with a fluence of 1 × 10¹³ ions/cm² were single phase and show improved crystalline structure with preferred C-axis orientation as revealed from XRD analysis. Effects of irradiation on bond structure of thin films were studied by FTIR spectroscopy. The spectrum shows no change in bonding structure of Zn-O after irradiation. Improved quality of films is further supported by FTIR studies. Optical properties of the pristine and irradiated samples have been determined by using UV-vis spectroscopic technique. Optical absorption spectra show an appreciable red shift in the band gap of irradiated Zn_1−xCo_xO thin film due to sp-d interaction between Co²⁺ ions and ZnO band electrons. Transmission spectra show absorption band edges at 1.8 eV, 2.05 eV and 2.18 eV corresponding to d-d transition of Co²⁺ ions in tetrahedral field of ZnO. The AFM study shows a slight increase in grain size and surface roughness of the thin films after irradiation.     

Effect of 160 MeV Ni ion irradiation on PbS quantum dots

PbS quantum dots of average size 10 nm are encapsulated in a matrix (polyvinyl alcohol (PVA)) following chemical route. They are irradiated with 160 MeV Ni¹²⁺ ion beam with fluences 10¹²-10¹³ ions/cm². Red shift in the absorption response in the optical absorption spectra reveal size enhancement of the quantum dots after irradiation and was confirmed by transmission electron microscopy (TEM). Photoluminescence (PL) study was carried out with excitation wavelength 325 nm on both unirradiated and irradiated samples at different fluences and fluence-dependent surface states and excitonic emission is observed in the PL study. The Huang-Rhys coupling constant decreases significantly after swift heavy ion (SHI) irradiation and shows a decreasing trend with increase in ion fluence.     

Thermoluminescence and photoluminescence of LiNaSO4:Eu irradiated with 24 and 48 MeV Li ion beam

Thermoluminescence (TL) of LiNaSO₄:Eu phosphor, irradiated with 24 and 48 MeV ⁷Li ions at different fluences in the range 5×10⁹-1×10¹² ion/cm², has been studied. The samples from the same batch were also exposed to γ-rays from a Cs¹³⁷ source for comparative studies. The TL glow curves of the materials, irradiated with ⁷Li ions, have similar structures to that of γ-irradiated sample. They have a simple structure with a prominent peak at 412 K along with small one at around 481 K. The intensity ratios of 412-481 K peaks have been observed to increase with fluence increasing, while that of γ-irradiated sample shows a reverse trend. This could be attributed to the changes in the recombination center populations due to ⁷Li ions, that have been implanted inside the matrix of LiNaSO₄:Eu, during irradiation and might also act as a source for new trapping and luminescent centers. The implantation has been confirmed by TRIM calculations. The penetration depths (where the ion comes to rest) are found to be 145 and 463 μm corresponding to 24 and 48 MeV ion beam energies, respectively, which are less than the thickness of the sample chips (∼800 μm). The efficiencies of LiNaSO₄:Eu to 24 and 48 MeV ⁷Li ions measured relative to γ-rays of Cs¹³⁷ are found to be 0.007 and 0.024, respectively. Theoretical analysis of the glow curves of the samples irradiated by ⁷Li ions and γ-rays were done by glow curve deconvolution method to determine trapping parameters of various peaks. The experimentally observed linearity/sublinearity has been discussed in the frame of track interaction model. Photoluminescence studies in the ⁷Li ions irradiated and un-irradiated samples show that europium ions have incorporated in the host in their divalent (emission at 440 nm) as well as trivalent (emissions at 594, 615 and 700 nm) forms. The intensities of the emission bands of these ions have been observed to increase with fluence increasing.     

Structural and morphological characterization of TiO2 nanostructured films grown by nanosecond pulsed laser deposition

TiO₂ has attracted a lot of attention due to its photocatalytic properties and its potential applications in environmental purification and self cleaning coatings, as well as for its high optical transmittance in the visible-IR spectral range, high chemical stability and mechanical resistance. In this paper, we report on the growth of TiO₂ nanocrystalline films on Si (1 0 0) substrates by pulsed laser deposition (PLD). Rutile sintered targets were irradiated by KrF excimer laser (λ = 248 nm, pulse duration ∼30 ns) in a controlled oxygen environment and at constant substrate temperature of 650 °C. The structural and morphological properties of the films have been studied for different deposition parameters, such as oxygen partial pressure (0.05-5 Pa) and laser fluence (2- 4 J/cm²). X-ray diffraction (XRD) shows the formation of both rutile and anatase phases; however, it is observed that the anatase phase is suppressed at the highest laser fluences. X-ray photoelectron spectroscopy (XPS) measurements were performed to determine the stoichiometry of the grown films. The surface morphology of the deposits, studied by scanning electron (SEM) and atomic force (AFM) microscopies, has revealed nanostructured films. The dimensions and density of the nanoparticles observed at the surface depend on the partial pressure of oxygen during growth. The smallest particles of about 40 nm diameter were obtained for the highest pressures of inlet gas.     

Effect of Co underlayer on soft magnetic properties and microstructure of FeCo thin films

High saturation magnetization soft magnetic FeCo (=Fe₆₅Co₃₅) films were prepared using a thin Co underlayer. The FeCo/Co films exhibited a well-defined in-plane uniaxial anisotropy with easy axis coercivity (H_ce) of 10 Oe and hard axis coercivity (H_ch) of 3 Oe, and a half reduction of H_c with H_ce=4.8 Oe and H_ch=1.0 Oe was obtained when the composition was adjusted to 25 at% Co. The effective permeability of the films remains flat around 250 to 800 MHz. The saturation magnetostriction was 5.2×10⁻⁵ and the intrinsic stress was 0.8 GPa in FeCo single layer, both were slightly reduced by Co underlayer. The Co underlayer changed the preferred orientation of the FeCo films from (2 0 0) to (1 1 0) but more significantly, reduced the average grain size from ∼74 to ∼8.2 nm. It also reduced the surface roughness from 2.351 to 0.751 nm. The initial stage and interface diffusion properties were examined by TEM and XPS.     

Surface morphology of metal films deposited on mica at various temperatures observed by atomic force microscopy

Thin films of eight metals with a thickness of 150 nm were deposited on mica substrates by thermal evaporation at various temperatures in a high vacuum. The surface morphology of the metal films was observed by atomic force microscopy (AFM) and the images were characterized quantitatively by a roughness analysis and a bearing analysis (surface height analysis). The films of Au, Ag, Cu, and Al with the high melting points were prepared at homologous temperatures T/T_m = 0.22-0.32, 0.40, and 0.56. The films of In, Sn, Bi, and Pb with the low melting points were prepared at T/T_m = 0.55-0.70, where T and T_m are the absolute temperatures of the mica substrate and the melting point of the metal, respectively. The surface morphology of these metal films was studied based on a structure zone model. The film surfaces of Au, Ag, and Cu prepared at the low temperatures (T/T_m = 0.22-0.24) consist of small round grains with diameters of 30-60 nm and heights of 2-7 nm. The surface heights of these metal films distribute randomly around the surface height at 0 nm and the morphology is caused by self-shadowing during the deposition. The grain size becomes large due to surface diffusion of adatoms and the film surfaces have individual characteristic morphology and roughnesses as T increases. The surface of the Al film becomes very smooth as T increases and the atomically smooth surface is obtained at T/T_m = 0.56-0.67 (250-350 °C). On the other hand, the atomically smooth surface of the Au film is obtained at T/T_m = 0.56 (473 ± 3 °C). The films of In, Sn, Bi, and Pb prepared at T/T_m = 0.55-0.70 also show the individual characteristic surface morphology.     

X-ray diffraction and photoelectron spectroscopy study of swift heavy ion irradiated Mn/p-Si structure

The electronic structure and interfacial chemistry of thin manganese films on p-Si (1 0 0) have been studied by photoelectron spectroscopy measurements using synchrotron radiation of 134 eV and from X-ray diffraction data. The Mn/p-Si structures have been irradiated from swift heavy ions (∼100 MeV) of Fe⁷⁺ with a fluence of 1 × 10¹⁴ ions/cm². Evolution of valence band spectrum with a sharp Fermi edge has been obtained. The observed Mn 3d peak has been related to the bonding of Mn 3d-Si 3sp states. Mn 3p (46.4 eV), Mn 3s (81.4 eV) and Si 2p (99.5 eV) core levels have also been observed which show a binding energy shift towards lower side as compared to their corresponding elemental values. From the photoelectron spectroscopic and X-ray diffraction results, Mn₅Si₃ metallic phase of manganese silicide has been found. The silicide phase has been found to grow on the irradiation.     

Defects induced magnetic transition in Co doped ZnS thin films: Effects of swift heavy ion irradiations

The effect of swift heavy ions (SHI) on magnetic ordering in ZnS thin films with Co ions substituted on Zn sites is investigated. The materials have been synthesized by pulsed laser deposition on substrates held at 600 °C for obtaining films with wurtzite crystal structure and it showed ferromagnetic ordering up to room temperature with a paramagnetic component. 120 MeV Ag ions have been used at different fluences of 1×10¹¹ ions/cm² and 1×10¹² ions/cm² for SHI induced modifications. The long range correlation between paramagnetic spins on Co ions was destroyed by irradiation and the material became purely paramagnetic. The effect is ascribed to the formation of cylindrical ion tracks due to the thermal spikes resulting from electron–phonon coupling.     

Preparation and shape control of multiple-arm magnetic particles

Multiple-arm magnetic CuFe₂O₄ particles have been synthesized via a simple one-step solution-phase route at the presence of ethylene glycol (EG) ligands, which plays a key role for the shape control of the particle. At low EG content, hexa-arm CuFe₂O₄ particles with average arm diameter 50 nm and length 400 nm were obtained. Furthermore, a possible mechanism of shape evaluation process of these magnetic particles is discussed.