Evolution of surface morphology of NiO thin films under swift heavy ion irradiation

NiO nanoparticle thin films grown on Si substrates were irradiated by 107 MeV Ag⁸⁺ ions. The films were characterized by glancing angle X-ray diffraction and atomic force microscopy. Ag ion irradiation was found to influence the shape and size of the nanoparticles. The pristine NiO film consisted of uniform size (∼100 nm along major axis and ∼55 nm along minor axis) elliptical particles, which changed to also of uniform size (∼63 nm) circular shape particles on irradiation at a fluence of 3 × 10¹³ ions cm⁻². Comparison of XRD line width analysis and AFM data revealed that the particles in the pristine films are single crystalline, which turn to polycrystalline on irradiation with 107 MeV Ag ions.     

Optical reflectivity study of silicon ion implanted poly(methyl methacrylate)

The optical reflectivity (both specular and off-specular) of poly(methyl methacrylate) (PMMA) implanted with silicon ions (Si⁺) at energy of 50 keV, is studied in the spectral range 0.25-25 μm. The effect from the Si⁺ implantation on the reflectivity of two PMMA materials is examined in the dose range from 10¹⁴ to 10¹⁷ ions/cm² and is linked to the structure formed in this ion implanted plastic. As compared to the pristine PMMA, an enhancement of the reflectivity of Si⁺ implanted PMMA is observed, that is attributed to the modification of the subsurface region of PMMA upon the ion implantation. The ion-produced subsurface organic interface is also probed by laser-induced thermo-lens.     

Topological and chemical investigation on super-hydrophobicity of PTFE surface caused by ion irradiation

Super-hydrophobic PTFE surfaces were obtained by irradiation of 200 keV Xe⁺ ion with the fluence of 6.2×10¹³ ions/cm². The contact angle of water on such surface is as large as 161±3°. SEM and XPS were used to investigate how the topological and chemical changes affect the wettability of the irradiated surface. Needle like structures at nanometer scale caused by irradiation are considered to be the reason of the super-hydrophobicity. The formation of oxygen containing group and defluorination effect on the treated surface are inferred to have negative contribution to the hydrophobic optimization of PTFE surface.     

Experimental investigations on poly(ethylene oxide) based sodium ion conducting composite polymer electrolytes dispersed with SnO2

New Na⁺ ion conducting composite polymer electrolytes comprising of polyethylene oxide (PEO)-NaClO₄ and PEO-NaI complexes dispersed with SnO₂ are reported. The results of the studies based on optical microscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infra-red (FTIR) spectroscopy, impedance analysis and mechanical testing are presented and discussed. The electrical conductivity of ≈5·10⁻⁵ S·cm⁻¹ at 40 °C was achieved for the dispersion of ≈10 wt.% of SnO₂ in both systems. The composition dependence of the conductivity has been well correlated with the variation in glass transition temperature and degree of crystallinity. A substantial enhancement in the mechanical properties of the composite films was observed at the cost of slight decrease in the conductivity at higher concentration of SnO₂. The temperature dependence of the conductivity follows apparently the Arrhenius type thermally activated process below and above the melting temperature of PEO. The conductivity of the materials has been found to be strongly humidity dependent. The materials are shown to be ionic with t_ion>0.9. The electrochemical stability of the materials has been observed to be up to ≈3.2 V for (PEO)₂₅NaClO₄+x% SnO₂ and is limited to ≈1.9 V for (PEO)₂₅NaI+x% SnO₂.     

Performance studies on composite gel polymer electrolytes for rechargeable magnesium battery application

Effect of micron-sized MgO particles dispersion on poly(vinylidenefluoride-co-hexafluoropropylene) (PVdF–HFP) based magnesium-ion (Mg²⁺) conducting gel polymer electrolyte has been studied using various electrical and electrochemical techniques. The composite gel films are free-standing and flexible with enough mechanical strength. The optimized composition with 10 wt% MgO particles offers a maximum electrical conductivity of ∼6×10⁻³ S cm⁻¹ at room temperature (∼25°C). The Mg²⁺ ion conduction in gel film is confirmed from cyclic voltammetry, impedance spectroscopy and transport number measurements. The applicability of the composite gel electrolyte to a rechargeable battery system has been examined by fabricating a prototype cell consisting of Mg (or Mg–MWCNT composite) and V₂O₅ as negative and positive electrodes, respectively. The rechargeability of the cell has been improved, when Mg metal was substituted by Mg–MWCNT composite as negative electrode.     

Ion beam induced modifications in nitroso substituted polyaniline: Spectral and electrical studies

The effects of ion beam irradiation on optical, chemical and electrical properties of nitroso substituted polyaniline, polynitrosoaniline (N-PANI) have been investigated. N-PANI was irradiated with 100 MeV ²⁸Si ions at different ion-fluences. The pristine and irradiated polymer samples were characterized by FT-IR, UV–visible spectroscopic techniques. The electrical conductivity studies were conducted on polymer samples. A significant change in optical band gap and room temperature electrical conductivity was observed in polymer samples after irradiation. The solubility of the polymer samples has also been tested in 1-methyl-2-pyrrolidone (NMP).     

Formation of nanocrystalline TiO2 by 100 MeV Au

Nanocrystalline TiO₂ structures are formed by irradiation of 100 MeV Au⁸⁺ ion beam on amorphous thin films of TiO₂. Surface morphology of the nanocrystals is studied by Atomic Force Microscopy (AFM). Amorphous to nanocrystalline phase transformation is identified by Glancing Angle X-ray Diffraction (GAXRD) and Raman spectroscopic studies. Optical characterization is carried out by UV-VIS spectroscopy technique. Blue shift observed in absorption band edge indicates the formation of nanophase TiO₂ after irradiation. The impinging swift heavy ion (100 MeV Au⁸⁺) induces nucleation of nanoparticles along the ion trajectory through inelastic collisions of the projectile with electrons of the material. It is observed that the shape and size of nanoparticles formed is dependant on the irradiation fluence.     

High-energy heavy-ion induced physical and surface-chemical modifications in polycrystalline cadmium sulfide thin films

The effect of high electronic energy deposition on the structure, surface topography, optical properties, and electronic structure of cadmium sulfide (CdS) thin films have been investigated by irradiating the films with 100 MeV Ag⁺⁷ ions at different ion fluences in the range of 10¹²–10¹³ ions/cm². The CdS films were deposited on glass substrate by thermal evaporation, and the films studied in the present work are polycrystalline with crystallites preferentially oriented along (002)-H direction. It is shown that swift heavy ion (SHI) irradiation leads to grain agglomeration and hence an increase in the grain size at low ion fluences. The observed lattice compaction was related to irradiation induced polygonization. The optical band gap energy decreased after irradiation, possibly due to the combined effect of change in the grain size and in the creation of intermediate energy levels. Enhanced nonradiative recombination via additional deep levels, introduced by SHI irradiation was noticed from photoluminescence (PL) analysis. A shift in the core levels associated with the change in Fermi level position was realized from XPS analysis. The chemistry of CdS film surface was studied which showed profound chemisorption of oxygen on the surface of CdS.     

Enhanced radiation hardness of ZnO nanorods versus bulk layers

It is shown that ZnO nanorods grown by MOCVD exhibit enhanced radiation hardness against high energy heavy ion irradiation as compared to bulk layers. The decrease of the luminescence intensity induced by 130 MeV Xe⁺²³ irradiation at a dose of 1.5 × 10¹⁴ cm^–2 in ZnO nanorods is nearly identical to that induced by a dose of 6 × 10¹² cm^–2 in bulk layers. The change in the nature of electronic transitions responsible for luminescence occurs at an irradiation dose around 1 × 10¹⁴ cm^–2 and 5 × 10¹² cm^–2 in nanorods and bulk layers, respectively. High energy heavy ion irradiation followed by thermal annealing is also effective on the quality of ZnO nanorods grown by electrodeposition. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Thermally stimulated current study of electron-irradiation induced defects in semi-insulating InP obtained by multiple-step wafer annealing

Electron-irradiation induced defects in semi-insulating (SI) InP wafers with Fe concentration ranging from 1.5×10¹⁵ to 2.5×10¹⁵ cm⁻³, which have been obtained by multiple-step wafer annealing (MWA) under phosphorus vapor pressure, were studied using a thermally stimulated current (TSC) method. New traps, e₁, e₂, e₃, e₄ and e₅, with activation energies of 0.22, 0.28, 0.37, 0.44 and 0.46 eV, respectively, were observed. Based upon the annealing behavior of traps and the calculated defect levels, traps e₁ and e₅ produced by the irradiation with electron doses above 1×10¹⁵ cm⁻² were linked to In_P and P_In antisite defects, respectively, that probably form complexes. Traps e₃ and e₄ produced by the irradiation with doses above 1×10¹⁴ cm⁻² were associated with In and P vacancy related defects, respectively.     

Effect of 160 MeV Ni ion irradiation on PbS quantum dots

PbS quantum dots of average size 10 nm are encapsulated in a matrix (polyvinyl alcohol (PVA)) following chemical route. They are irradiated with 160 MeV Ni¹²⁺ ion beam with fluences 10¹²-10¹³ ions/cm². Red shift in the absorption response in the optical absorption spectra reveal size enhancement of the quantum dots after irradiation and was confirmed by transmission electron microscopy (TEM). Photoluminescence (PL) study was carried out with excitation wavelength 325 nm on both unirradiated and irradiated samples at different fluences and fluence-dependent surface states and excitonic emission is observed in the PL study. The Huang-Rhys coupling constant decreases significantly after swift heavy ion (SHI) irradiation and shows a decreasing trend with increase in ion fluence.     

Nonlinear optical properties of Au/ZnO nanoparticle arrays

The triangular-shaped Au/ZnO nanoparticle arrays were fabricated on fused quartz substrate using nanosphere lithography. The structural characterization of the Au/ZnO nanoparticle arrays was investigated by atomic force microscopy. The absorption peak due to the surface plasmon resonance of Au particles at the wavelength of about 570 nm was observed. The nonlinear optical properties of the nanoparticle arrays were measured using the z-scan method at a wavelength of 532 nm with pulse duration of 10 ns. The real and imaginary part of third-order nonlinear optical susceptibility, Re χ⁽³⁾ and Im χ⁽³⁾, were determined to be 1.15 × 10⁻⁶ and −5.36 × 10⁻⁷ esu, respectively. The results show that the Au/ZnO nanoparticle arrays have great potential for future optical devices.     

Ion synthesis of copper nanoparticles in sapphire and their modification by high-power excimer laser pulses: A review

Composite layers made in sapphire by implantation of 40-keV Cu⁺ ions at a dose of 1 × 10¹⁷ cm⁻² and an ion beam current density varying from 2.5 to 10 μA/cm² are studied. It is shown that ion implantation makes it possible to synthesize a composite layer containing copper nanoparticles at the surface of the insulator. However, the nanoparticle size distribution in this layer is nonuniform. The composite layer is exposed to high-power excimer laser radiation with the aim of modifying the size and size distribution of the metal nanoparticles in it. The resulting structures are examined by Rutherford backscattering, optical reflection spectroscopy, and atomic force microscopy. It is found that the laser irradiation diminishes copper nanoparticles in the composite layer. Experimental data on laser modification may be explained by photofragmentation and/or melting of the nanoparticles in the sapphire matrix under the action of nanosecond laser pulses.     

Lithium ion transport and ion-polymer interaction in PEO based polymer electrolyte plasticized with ionic liquid

The polyethylene oxide (PEO) based lithium ion conducting polymer electrolytes complexed with lithium trifluoromethanesulfonate (LiCF₃SO₃ or LiTf) plasticized with an ionic liquid 1-ethyl 3-methyl imidazolium trifluoromethanesulfonate (EMITf) have been reported. Morphological, spectroscopic, thermal and electrochemical investigations demonstrate promising characteristics of the polymer films, suitable as electrolyte in various energy storage/conversion devices. Significant structural changes have been observed in the polymer electrolyte due to the ionic liquid addition, investigated by X-ray diffraction (XRD) and optical microscopy. The ion-polymer interaction, particularly the interaction of imidazolium cation with PEO chains, has been evidenced by IR and Raman spectroscopic studies. The optimized composition of the polymer electrolyte i.e. PEO_25.LiTf + 40 wt.% EMITf offer room temperature ionic conductivity of ~ 3 × 10^− 4 S cm^− 1 with wide electrochemical stability window and excellent thermal stability. The ‘σ versus 1/T’ curves show apparent Arrhenius behavior below and above melting temperature. The ionic conductivity has been observed due to Li⁺ ions, as confirmed from ⁷Li-NMR studies, though the component ions of ionic liquid and anions also contribute significantly to the overall conductivity.     

IR laser ablation of doped poly(methyl methacrylate)

We investigate the TEA CO₂ laser ablation of films of poly(methyl methacrylate), PMMA, with average M_W 2.5, 120 and 996 kDa doped with photosensitive compounds iodo-naphthalene (NapI) and iodo-phenanthrene (PhenI) by examining the induced morphological and physicochemical modifications. The films casted on CaF₂ substrates were irradiated with a pulsed CO₂ laser (10P(20) line at 10.59 μm) in resonance with vibrational modes of PMMA and of the dopants at fluences up to 6 J/cm². Laser induced fluorescence probing of photoproducts in a pump and probe configuration is carried out at 266 nm. Formation of naphthalene (NapH) and phenanthrene (PhenH) is observed in NapI and PhenI doped PMMA, respectively, with relatively higher yields in high M_W polymer, in similarity with results obtained previously upon irradiation in the UV at 248 nm. Above threshold, formation of photoproducts is nearly complete after 200 ms. As established via optical microscopy, bubbles are formed in the irradiated areas with sizes that depend on polymer M_W and filaments are observed to be ejected out of the irradiated volume in the samples made with high M_W polymer. The implications of these results for the mechanisms of polymer IR laser ablation are discussed and compared with UV range studies.     

Novel properties of nanoscale organic–inorganic systems and photonic crystals — conducting polymers in nanoscale periodic structures,microcavities and photonic crystals

Conducting polymer/C₆₀and C₆₀doped conducting polymer/C₆₀heterojunctions have been fabricated and found to exhibit remarkably enhanced photoresponse due to the highly effective photoinduced charge transfer at the interface. In conducting polymer/C₆₀alkali metal nanoscale composite systems, multiphase superconductivity has been clarified and explained by taking the coupling of nanoscale grains by Josephson junctions into consideration. As examples of intramolecular organic-inorganic combined systems, unique electrical and optical characteristics have been revealed in oligosilanylene oligophenylene polymers. Electroluminescence has been demonstrated in organic-inorganic junction devices such as conducting polymer/porous Si and conducting polymer/diamond junctions. Conducting, polymer-based nanoscale multilayer systems have been studied utilizing molecular self-assembly method and novel photosensitive characteristics have been revealed. \indent Novel optical and electrical properties of conducting polymers infiltrated in a photonic crystal, synthetic opal made of SiO₂spheres of several hundred nm in diameter, and also a conducting polymer replica have been revealed. A clear diffraction pattern was observed in a photonic crystal infiltrated with conducting polymers, and transmission spectra are dependent on various ambient conditions. Their photoluminescence (PL) spectra, spectral narrowing of PL and lasing characteristics at relatively low optical excitation have also been clarified. Novel conducting characteristics of conducting polymers in a photonic crystal that was prepared by pyrolysis of a polymer replica of opal have also been observed.     

Optical and mechanical properties of alumina films fabricated on Kapton polymer by plasma immersion ion implantation and deposition using different biases

Alumina films are fabricated on Kapton polymer by aluminum plasma immersion ion implantation and deposition in an oxidizing ambient and the effects of the bias voltage on the film properties are investigated. Rutherford backscattering spectrometry (RBS) reveals successful deposition of alumina films on the polymer surface and that the O to Al ratio is higher than that of stoichiometric Al₂O₃. The thickness of the modified layers decreases from 200 to 120 nm when the bias voltage is increased from 5 to 20 kV. Our results indicate that higher bombardment energy may lead to higher crack resistance and better film adhesion. However, a higher sample bias degrades the optical properties of the films as indicated by the higher absorbance and lower energy band gap. Therefore, the processing voltage must be optimized to yield a protective layer with the appropriate thickness, superior optical properties, as well as high crack resistance.     

Effect of H irradiation on the optical properties of vacuum evaporated AgInSe2 thin films

We prepared polycrystalline AgInSe₂ thin films by vacuum evaporation on glass substrate at a high temperature using the stoichiometric powder. The thin films were characterized by X-ray diffraction and UV-vis-NIR spectroscopy. The samples were subjected to the irradiation of 1.26 MeV protons (H⁺). The effect of irradiation on the optical properties has been investigated for different doses of H⁺. It is observed that the band gap of silver indium selenide thin films decreases gradually with ion irradiation dose.     

Nonlinear diffraction in gratings based on polymer–dispersed TiO 2 nanoparticles

In this letter we report a simple technique to produce volume holographic gratings based on photopolymerizable composites containing TiO₂ nanoparticles. Diffraction gratings with high refractive index modulation amplitude (up to 1.25 × 10⁻²) have been formed due to the periodic distribution of high refractive index nanoparticles in a low refractive index polymer matrix. The diffraction efficiency increases strongly on increasing the nanoparticle concentration. Taking the mixture with 10 wt.% TiO₂ nanoparticles, gratings with high diffraction efficiency, low level of scattering and high transparency in the visible-wavelength range have been obtained. This will ultimately lead to different applications of diffractive optical elements based on nanocomposites. The dependence of the gratings’ diffraction efficiency on the intensity of probe laser pulses at 1064 nm has been explored. It is shown that the nonlinear response of the gratings is attributed mainly to the nonlinear properties of the TiO₂ nanoparticles embedded in the polymer matrix. The mechanism of the grating formation and the reasons for the nonlinear behavior of the diffraction efficiency are discussed.     

Growth of fractal patterns during irradiation-induced amorphization in nano-sized Ni–W multilayers

In the Ni–W system, a uniform amorphous Ni–W phase was obtained by ion irradiation of the nano-sized Ni–W multilayers at liquid-nitrogen temperature. Interestingly, before undergoing complete amorphization, fractal patterns were observed at a relatively low irradiation dose (3×10¹⁴ Xe⁺/cm²), and the patterns were characterized to consist of crystalline grains of Ni-enriched solid solution. The fractal dimension was measured to be about 1.68±0.05, which was very close to that expected by the cluster diffusion-limited aggregation model. Received: 30 January 2002 / Accepted: 2 February 2002 / Published online: 3 May 2002