Properties of vanadium-doped SrBi4Ti4O15 ferroelectric ceramics

Using the standard solid-state reaction method, several vanadium-doped ferroelectric ceramics of type SrBi_4−x/3Ti_4−xV_xO₁₅ (SBTV−x) were synthesized. The vanadium doping content, x, rangs from 0.00 to 0.06. The crystal structure of SrBi₄Ti₄O₁₅ is not affected by V-doping. The electric breakdown voltage of the samples increases with V content. Meanwhile, V-doping results in a notable enlargement of remnant polarization (2P_r). The 2P_r of STBV−0.03 reaches a very large value, which is over 50 μC/cm² and is nearly twice greater than that at zero doping. The Curie temperatures of V-doped samples decrease slightly in comparison with that of SrBi₄Ti₄O₁₅. V-doping can improve the electric properties of SrBi₄Ti₄O₁₅ without sacrificing its thermal stableness.     

Electrical properties of neodymium doped CaBi4Ti4O15 ceramics

Neodymium doped bismuth layer structure ferroelectrics (BLSFs) ceramics CaBi_4−xNd_xTi₄O₁₅ (x=0, 0.25, 0.50, 0.75) were prepared by solid-state reaction method. X-ray diffraction pattern showed that single phase was formed when x=0-0.75. The refined lattice parameters showed that a (b) axes decrease at x=0.25 and increase with more Nd³⁺ dopant. The effects of Nd³⁺ doping on the dielectric and ferroelectric properties of CaBi₄Ti₄O₁₅ ceramics are studied. Nd³⁺ dopant decreased the Curie temperature linearly, and the dielectric loss, tan δ, as well. The remnant polarization of Nd³⁺ doped CaBi₄Ti₄O₁₅ ceramics was increased by 80% at x=0.25, while more Nd³⁺ dopant decreased the remnant polarization. CaBi_3.75Nd_0.25Ti₄O₁₅ ceramics had the largest piezoelectric constant d₃₃. The structure and properties of CaBi_4−xNd_xTi₄O₁₅ ceramics showed that Nd³⁺ may occupy different crystal locations when Nd³⁺ content x is less than 0.25 and more than 0.50.     

Properties of vanadium-doped SrBi4Ti4O15 ferroelectric ceramics

Using the standard solid-state reaction method, several vanadium-doped ferroelectric ceramics of type SrBi_4−x/3Ti_4−xV_xO₁₅ (SBTV-x) were synthesized. The vanadium doping content, x, ranges from 0.000 to 0.06. The crystal structure of SrBi₄Ti₄O₁₅ is not affected by V-doping. The electric breakdown voltage of the samples increases with V content. Meanwhile, V-doping results in a notable enlargement of remnant polarization (2P_r). The 2P_r of STBV-0.03 reaches a very large value, which is over 50 μC/cm² and is nearly twice greater than that at zero doping. The Curie temperatures of V-doped samples decrease slightly in comparison with that of SrBi₄Ti₄O₁₅. V-doping can improve the electric properties of SrBi₄Ti₄O₁₅ without sacrificing its thermal stableness.     

Effects of vanadium doping on structure and electrical properties of SrBi4Ti4O15 thin films

The effects of vanadium(V) doping into SrBi₄Ti₄O₁₅ (SBTi) thin films on the structure, ferroelectric, leakage current, dielectric, and fatigue properties have been studied. X-ray diffraction result showed that the crystal structure of the SBTi thin films with and without vanadium is the same. Enhanced ferroelectricity was observed in the V-doped SrBi₄Ti₄O₁₅ (SrBi_4−x/3Ti_4−xV_xO₁₅, SBTiV-x (x = 0.03, 0.06, and 0.09)) thin films compared to the pure SrBi₄Ti₄O₁₅ thin film. The values of remnant polarization (2P_r) and coercive field (2E_c) of the SBTiV-0.09 thin film capacitor were 40.9 μC/cm² and 105.6 kV/cm at an applied electric field of 187.5 kV/cm, respectively. The 2P_r value is over five times larger than that of the pure SBTi thin film capacitor. At 100 kHz, the values of dielectric constant and dielectric loss were 449 and 0.04, and 214 and 0.06 for the SBTiV-0.09 and the pure SBTi thin film capacitors, respectively. The leakage current density of the SBTiV-0.09 thin film capacitor measured at 100 kV/cm was 6.8 × 10⁻⁹ A/cm², which is more than two and a half orders of magnitude lower than that of the pure SBTi thin film capacitor. Furthermore, the SBTiV-0.09 thin film exhibited good fatigue endurance up to 10¹⁰ switching cycles. The improved electrical properties may be related to the reduction of internal defects such as bismuth and oxygen vacancies with changes in the grain size by doping of vanadium into SBTi.     

Phase transformation behavior and dielectric characteristics of BaTi1−x(Al1/2Nb1/2)xO3 (0.01≤x≤0.40) ceramics

Microstructure, phase transformation behavior and dielectric properties of BaTi_1−x(Al_1/2Nb_1/2)_xO₃ (0.01≤x≤0.40) ceramics were investigated. A high level of (Al_1/2Nb_1/2)⁴⁺ substitution for Ti⁴⁺ ions was not conducive to the stability of the perovskite structure and resulted in the formation of BaAl₂O₄. As x was increased, lattice constants and unit cell volume decreased, reached a minimum at x=0.10 and then increased. The BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics at room temperature experienced a transformation from ferroelectric to paraelectric phase with increasing (Al_1/2Nb_1/2)⁴⁺ concentration. Meanwhile, permittivity of the BaTi_1−x(Al_1/2Nb_1/2)_xO₃ ceramics was markedly reduced, while Q value was slightly increased. Frequency dispersion of dielectric peak was obviously increased as x was increased from 0.01 to 0.10. It is of great interest that a dielectric abnormity represented by a broad dielectric peak at 200-400 K was observed for the composition with x=0.40.     

Dielectric properties and temperature stability of BaTiO3 co-doped La2O3 and Tm2O3

The influence of La₂O₃ and Tm₂O₃ co-doping on the dielectric properties and the temperature stability of BaTiO₃ was investigated. BaTiO₃ ceramics were prepared with the compositional formula of (Ba_1−xLa_x)(Ti_1-x/4−yTm_y)O₃. La₂O₃ and Tm₂O₃ co-doping in BaTiO₃ mainly had effects on an increase in the dielectric constant and the temperature stability, respectively. The increase of La₂O₃ concentration and the decrease of Tm₂O₃ concentration in BaTiO₃ resulted in a decrease of lattice parameter and tetragonality because La³⁺ ion substituting for Ba site is smaller than Ba²⁺ ion and Tm³⁺ ion substituting for Ti site is larger than Ti⁴⁺ ion. With the increase of La₂O₃ and the decrease of Tm₂O₃, the dielectric constant of BaTiO₃ was enhanced in spite of the reduction of tetragonality. P-E hysteresis measurements revealed that this phenomenon was based on the improvement of remanent polarization with the increase of La₂O₃ concentration. The introduction of excess Tm₂O₃ in BaTiO₃ suppressed the grain growth and BaTiO₃ ceramics showed higher temperature stability due to the stable tetragonal structure and the small grain size with the increase of Tm₂O₃ concentration.     

Dielectric properties of lanthanum-doped CaCu3Ti4O12 synthesized by semi-wet route

Effect of La³⁺ doping at Ca²⁺ site in CaCu₃Ti₄O₁₂ has been examined. Compositions with x=0.10, 0.20 and 0.30 were synthesized in the system Ca_(1−3x/2)La_xCu₃Ti₄O₁₂ by semi-wet method. Powder X-ray diffraction confirmed the formation of monophasic compounds. The structure remains cubic similar to CaCu₃Ti₄O₁₂. Lattice parameter increases slightly with increasing La³⁺ concentration. Microstructure has been studied using scanning electron microscopy (SEM). Average grain size is in the range 2-4 μm for various compositions. Energy-dispersive spectrometer (EDS) studies confirm the stoichiometry of the synthesized materials. Dielectric constant, dielectric loss and conductivity of the samples decrease with increasing lanthanum concentrations.     

La掺杂SrBi4Ti4O15铁电材料性能研究

按x=0.00，0.10，0.25，0.50，0.75和1.00，采用固相烧结工艺，制备了不同La掺杂量的SrBi_4-xLa_xTi₄O₁₅的陶瓷样品. 用x射线衍射对其微结构进行了分析，并测量了铁电、介电性能.结果发现，La掺杂未改变SrBi₄Ti ₄O₁₅的晶体结构.随掺杂量的增加，样品的矫顽场(E_c)下降，剩余极化(2P_{关键词： 4-x}La_xTi₄O₁₅')" href="#">SrBi_4-xLa_xTi₄O₁₅ La掺杂 铁电性能 相变温度 弛豫铁电     

Ferroelectric properties of Bi3.25−x/3La0.75Ti3−xNbxO12 films prepared by pulsed laser deposition

Bi₄Ti₃O₁₂ (BiT), Bi_3.25La_0.75Ti₃O₁₂ (BLT), Bi_4−x/3Ti_3−xNb_xO₁₂ (BTN) and Bi_3.25−x/3La_0.75Ti_3−xNb_xO₁₂ (BLTN) thin films have been prepared by pulsed laser deposition. BTN and BLTN films exhibit a maximum in the remanent polarization P_r at a Nb content x=0.018. At this Nb content, the BLTN film has a P_r value (25 μC/cm²) that is much higher than that of BiT and a coercive field similar to that of BiT. The polarization of this BLTN film is fatigue-free up to 10⁹ switching cycles. The high fatigue resistance is mainly due to the substitution of Bi³⁺ ions by La³⁺ ions at the A site and the enhanced P_r arises largely from the replacement of Ti⁴⁺ ions by Nb⁵⁺ ions at the B site. The mechanisms behind the effects of the substitution at the two sites are discussed.     

(Bi,La)4Ti3O12-Sr(Bi,La)4Ti4O15共生结构铁电材料性能研究

采用固相烧结工艺，制备了不同La掺杂量(x=0.00，0.25，0.50，0.75，1.00，1.25和1.50) 的(Bi, La)₄Ti₃O₁₂-Sr(Bi, La)₄Ti4O₁₅ (SrBi_8-xLa_xT i₇O₂₇)共生结构铁电陶瓷样品.用x射线衍射对其进行微结构分析 ，并测量铁 关键词： 4Ti₃O₁₂-SrBi₄Ti₄O₁₅')" href="#">Bi₄Ti₃O₁₂-SrBi₄Ti_{4O15 La掺杂 铁电性能 居里温度 弛豫铁电}     

Magnetic and Microwave Absorbing Properties of Electrospun Ba(1−x)LaxFe12O19 Nanofibers

Ba_(1−x)La_xFe₁₂O₁₉ (0.00≤x≤0.10) nanofibers were fabricated via the electrospinning technique followed by heat treatment at different temperatures for 2 h. Various characterization methods including scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and microwave vector network analyzer were employed to investigate the morphologies, crystalline phases, magnetic properties, and complex electromagnetic parameters of nanofibers. The SEM images indicate that samples with various values of x are of a continuous fiber-like morphology with an average diameter of 110±20 nm. The XRD patterns show that the main phase is M-type barium hexaferrite without other impurity phases when calcined at 1100 °C. The VSM results show that coercive force (H_c) decreases first and then increases, while saturation magnetization (M_s) reveals an increase at first and then decreases with La³⁺ ions content increase. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the M-type barium hexaferrites. The microwave absorption performance of Ba_0.95La_0.05Fe₁₂O₁₉ nanofibers gets significant improvement: The bandwidth below −10 dB expands from 0 GHz to 12.6 GHz, and the peak value of reflection loss decreases from −9.65 dB to −23.02 dB with the layer thickness of 2.0 mm.     

Superconductivity and magnetism of La2Cu1−xZnxO4+δ chemically oxidized by NaClO

The structural, superconducting and magnetic properties of La₂Cu_1−xZn_xO_4+δ (0≤x≤0.1) chemically oxidized by NaClO at room temperature were studied. All the samples before and after oxidation are single phase with orthorhombic structure, as indicated by their powder X-ray diffraction analysis. The iodometric titration results indicate that Zn-substituted La₂Cu_1−xZn_xO₄ is more favorable for the insertion of the excess oxygen, as compared to the Zn-free La₂CuO₄. The T_c suppression rate resulting from Zn substitution in La₂Cu_1−xZn_xO_4+δ is −12.4 K/%. The effective magnetic moment induced by the non-magnetic Zn ion is the order of one Bohr magneton, which decreases with increasing the Zn concentrations in the range examined. The latter two results are qualitatively well consistent with those obtained in La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping. This reveals that the non-magnetic Zn ions play the same role in both of the La₂Cu_1−xZn_xO_4+δ with the excess oxygen content of about 0.1 and the La_2−xSr_xCu_1−yZn_yO₄ with the Sr optimal doping.     

Synthesis and structure refinement of layered perovskites Ba5−xLaxNb4−xTixO15 (x=0, 1, 2, 3 and 4) solid solutions

Ba_5−xLa_xNb_4−xTi_xO₁₅ solid solutions were prepared by solid state reaction method. Structural analysis for the stoichiometric phases was performed for x=0, 1, 2 and 3 by Rietveld analysis of neutron powder diffraction data. The x=0, 1 and 2 members could be refined in the space group P-3m1 (stacking sequence chhcc, polytypoid 5 H). There is a decrease in cell volume as x increases. La³⁺ occupies preferentially the A2 site (Wyckoff site 2d) and Ti⁴⁺ the B2 site (Wyckoff site 2c). As x increases there is an increase of the global instability index (GII) (which is a measure of the extent to which the BVS rule is violated over the whole structure) indicating the presence of intrinsic strains large enough to cause instability at room temperature. This strain is responsible for a structural change for the member with x=3, which could be refined in the space group P-3c1 (stacking sequence (chhcc)₂, polytypoid 2×5H=10H). This change in space group is associated with a cooperative rotation of (Nb/Ti)O₆ octahedra around the c-axis, necessary to accommodate the smaller La³⁺ ion in the cuboctahedral cavity.     

Ferroelectric and dielectric properties of La/Mn co-doped Bi4Ti3O12 ceramics

La/Mn co-doped Bi4Ti3O12 ceramics,Bi3.25La0.75Ti3-xMnxO12(x=0.02,0.04,0.06,0.08),were prepared by the solid-state reaction method.The influence of manganese substitution for the titanium part in Bi 3.25 La 0.75 Ti 3 O 12 on the sintering behaviour,microstructure,Raman spectra and electrical properties was investigated.The experimental results show that the phase composition of all samples with and without manganese doping,sintered at 1000 ℃,consists of a single phase with a bismuth-layered structure belonging to the crystalline phase Bi4Ti3O12.There is no evidence of any impurity phase,but a small change in crystallographic orientation is observed.The Curie temperature of Bi3.25La0.75Ti3-xMnxO12 ceramics is steadily shifted to lower temperature with increasing Mn-doping content.Moreover,the remnant polarisation(Pr) of Bi3.25La0.75Ti2.92Mn0.08O12 samples increases with Mn-doping content,and the Bi3.25La0.75Ti2.92Mn0.08O12 sample exhibits the largest P r of 16.6 μC/cm 2.     

La掺杂诱发层状钙钛矿型铁电体弛豫性相变的介电研究

制备了La掺杂层状钙钛矿铁电体材料SrBi₄Ti₄O₁₅, Sr₂Bi₄Ti₅O₁₈以及共生结构Bi₄Ti₃O₁₂-SrBi₄Ti₄O₁₅，通过研究样品的变温介电特性发现，SrBi_4-xLa_{x 关键词： 弛豫性相变 微畴-宏畴 层状钙钛矿 介电性能}     

Dielectric properties and phase transitions of (Pb0.87La0.02Ba0.1)(Zr0.6Sn0.4−xTix)O3 ceramics with compositions near AFE/RFE phase boundary

The electrical properties and phase transition behavior of (Pb_0.87La_0.02Ba_0.1)(Zr_0.6Sn_0.4−xTi_x)O₃ solid solutions (PLBZST, 0.04≤x0.2) were investigated by the X-ray diffraction, permittivity, pyroelectric current, and P-E electric hysterisis loops. As the composition x increased from 0.04 to 0.2, the antiferroelectric ceramics (x≤0.07, AFE) with tetragonal phase changed to the ferroelectric relaxors (RFE, 0.09≤x). AFE ceramics showed a peculiar diffuse phase transition and dielectric relaxation at the low temperature (down to −100 °C) due to a frustration between AFE and FE state. With an increase in composition x, electrically field-induced AFE-FE switching field (E_AFE-FE) and AFE-paraelectric (PE) phase transition temperature (T_c) are depressed in the temperature (T)-Ti composition (x) phase diagram, a FE-AFE-PE triple phase point (T_tr) with the lowest transition temperature occurred at x=0.09. The pyroelectric currents under an application of various external electric field (E) were measured to identify a T-E phase diagram of the PLBZST compound.     

Synthesis, structural and electrical properties of La and Nb modified Bi4Ti3O12 ferroelectric ceramics

Polycrystalline ceramic samples of Bi_4−xLa_xTi₃O₁₂ (x=0.0, 0.5 and 1) and Bi_3.5La_0.5Ti_3−yNb_yO₁₂ (y=0.02 and 0.04) have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on Bi-site and Nb doping on Ti-site on the structural and electrical properties of Bi₄Ti₃O₁₂ powders was investigated by X-ray diffraction, scanning electron microscopy, dc conductivity and dielectric studies. A better agreement between the observed and calculated X-ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non-centrosymmetric space group Fmmm in all the cases. A better agreement between observed and calculated d-values also shows that the lattice parameters calculated using the Rietveld refinement analysis are better. The increase in lanthanum and niobium contents does not lead to any secondary phases. It is found that La³⁺ doping reduces the material grain size and changes its morphology from the plate-like form to a spherical staking like form. The substitution of Nb for Ti ions affected the degree of disorder and modified the dielectric properties leading to more resistive ceramic compounds. The shape and size of the grains are strongly influenced by the addition of niobium to the system. The activation energies of all the compounds were calculated by measuring their dc electrical conductivities. The frequency and temperature dependent dielectric behavior of all the compounds have also been studied and the results are discussed in detail. The substitution of La and Nb on the Bi and Ti sites decreased the T_c and improved the dielectric and ferroelectric behavior.     

Studies on Structural, Magnetic and Thermal Properties of xFe2TiO4-(1−x)Fe3O4 (0≤x≤1) Pseudo-binary System

The xFe₂TiO₄-(1−x)Fe₃O₄ pseudo-binary systems (0≤x≤1) of ulvöspinel component were synthesized by solid-state reaction between ulvöspinel Fe₂TiO₄ precursors and commercial Fe₃O₄ powders in stochiometric proportions. Crystalline structures were determined by X-ray powder diffraction (XRD) and it was found that the as-obtained titanomagnetites maintain an inverse spinel structure. The lattice parameter a of synthesized titanomagnetite increases linearly with the increase in the ulvöspinel component. ⁵⁷Fe room temperature Mössbauer spectra were employed to evaluate the magnetic properties and cation distribution. The hyperfine magnetic field is observed to decrease with increasing Fe₂TiO₄ component. The fraction of Fe²⁺ in both tetrahedral and octahedral sites increases with the increase in Ti⁴⁺ content, due to the substitution and reduction of Fe³⁺ by Ti⁴⁺ that maintains the charge balance in the spinel structure. For x in the range of 0 ≤x≤0.4, the solid solution is ferrimagnetic at room temperature. However, it shows weak ferrimagnetic and paramagnetic behavior for x in the range of 0.4<x≤0.7. When x>0.70, it only shows paramagnetic behavior, with the appearance of quadrupole doublets in the Mössbauer spectra. Simultaneous differential scanning calorimetry and thermogravimetric analysis (DSC-TGA) studies showed that magnetite is not stable, and thermal decomposition of magnetite occurs with weight losses accompanying with exothermic processes under heat treatment in inert atmosphere.     

Ferroelectric properties of Pr6O11-doped Bi4Ti3O12

Praseodymium doped Bi₄Ti₃O₁₂ (BIT) ceramics with composition Bi_2.9Pr_0.9Ti₃O₁₂ (BPT) were prepared by solid state reaction. These samples have polycrystalline Bi-layered perovskite structure without preferred orientation, and consist of well-developed plate-like grains with random orientation. Pr doping into BIT causes a large shift of the Curie temperature (T_C) of the BIT from 675 to 398 °C. At an electric field of 87 kV/cm, the remanent polarization and the coercive field of the BPT ceramics are 30 μC/cm² and 52 kV/cm, respectively. Furthermore, the dielectric permittivity and the dissipation factor of the BPT ceramics are 300 and 0.003 at 1 MHz, 1 V, and room temperature. Ferroelectric properties of the BPT ceramics are superior to V-doped Bi₄Ti₃O₁₂ (∼20 μC/cm² and 80 kV/cm) and (Sr, Ta)-doped Bi₄Ti₃O₁₂ (∼12 μC/cm² and 71 kV/cm) ceramics. In addition, the dense ceramics of praseodymium-doped B₄Ti₃O₁₂ were obtained by sintering at 1100 °C, about 100-200 °C lower than those of the SrBi₂Ta₂O₉ system.     

Microstructures and microwave dielectric properties of La1-xBx(Mg0.5Sn0.5)O3 ceramics

The microwave dielectric properties of La_1-xB_x(Mg_0.5Sn_0.5)O₃ ceramics were examined with a view to their exploitation for mobile communication. The La_1-xB_x(Mg_0.5Sn_0.5)O₃ ceramics were prepared by the conventional solid-state method with various sintering temperatures. The X-ray diffraction patterns of the La_0.995B_0.005(Mg_0.5Sn_0.5)O₃ ceramics revealed no significant variation of phase with sintering temperatures. A maximum apparent density of 6.58 g/cm³, a dielectric constant (ε_r) of 19.8, a quality factor (Q × f) of 41,800 GHz, and a temperature coefficient of resonant frequency (τ_f) of −86 ppm/°C were obtained for La_0.995B_0.005(Mg_0.5Sn_0.5)O₃ ceramics that were sintered at 1500 °C for 4 h.