Acoustic cloak with duplex communication ability constructed by multilayered homogeneous isotropic materials

Based on the effective medium theory, we propose a practical implementation of a cylindrical acoustic cloak with a concentric alternating multilayered structure of homogeneous isotropic materials, which can perfectly mimic the ideal radius-dependent and anisotropic ordinary lens cloak. The proposal exhibits near-ideal cloaking performance such as low-scattering and shadow-reducing in a wide frequency range, thus it can hide an object from the detection of acoustic waves. The acoustic wave can pass through the cloaking shell with an unchanged wavefront shape, which endues the cloaked object with duplex communication ability. More simulations on the acoustic far-field scattering patterns and the total scattering cross-section are performed to investigate the layer number and the frequency dependence of the cloaking effect, and the results show that the thinner layers exhibit a better cloaking effect. The proposal may significantly facilitate the experimental demonstration of the acoustic cloak.     

Cloaking an object in a half space without reflection

A novel cloaking scheme to hide an object in a half space from electromagnetic (EM) detection without reflection is firstly presented. The proposed cloaking scheme contains a couple of matching strips, which consist of an isotropic material layer and an anisotropic UPML layer, located right under the bottom surface of a semi-cylindrical cloaking shell. Simple expressions for the material parameters of the cloaking scheme are derived. Numerical simulations are also performed, and a good cloaking effect is achieved. The cloaking scheme is effective to hide the local object with strong scattering characters placed on mobile carriers, such as the radar antenna system on an aircraft.1     

Three dimensional multilayered acoustic cloak with homogeneous isotropic materials

A three-dimensional (3D) spherical acoustic cloak is designed using an acoustic layered system, which can hide an object from the detection of acoustic wave in arbitrary direction. The cloak is constructed from multilayered concentric spherical shells filled with homogeneous isotropic materials. Based on spherical wave expansion method, we confirm that significant low-reflection, acoustic-shadow-reducing, and wavefront-bending effects in 3D space can be achieved by the proposed cloak. The angle distribution of the scattered wave is further evaluated by the far-field scattering pattern. In addition, the cloak is demonstrated to work efficiently in a wide bandwidth in which the cloaking efficiency decreases with increasing frequency. This study may be helpful to design high-performance 3D acoustic cloaks for broadband acoustic waves in all incidence directions.     

Improving the performance of acoustic invisibility with multilayer structure based on scattering analysis

In this paper, acoustic scattering from the system comprised of a cloaked object and the multilayer cloak with only one single pair of isotropic media is analyzed with a recursive numerical method. The designed acoustic parameters of the isotropic cloak media are assumed to be single-negative, and the resulting cloak can reduce acoustic scattering from an acoustic sensor while allowing it to receive external information. Several factors that may influence the performance of the cloak, including the number of layers and the acoustic dissipation of the medium are fully analyzed. Furthermore, the possibility of achieving acoustic invisibility with positive acoustic parameters is proposed by searching the optimum value in the parameter space and minimizing the scattering cross-section.     

Scattering theory derivation of a 3D acoustic cloaking shell

Through acoustic scattering theory we derive the mass density and bulk modulus of a spherical shell that can eliminate scattering from an arbitrary object in the interior of the shell--in other words, a 3D acoustic cloaking shell. Calculations confirm that the pressure and velocity fields are smoothly bent and excluded from the central region as for previously reported electromagnetic cloaking shells. The shell requires an anisotropic mass density with principal axes in the spherical coordinate directions and a radially dependent bulk modulus. The existence of this 3D cloaking shell indicates that such reflectionless solutions may also exist for other wave systems that are not isomorphic with electromagnetics.     

Impedance-Matched Reduced Acoustic Cloaking with Realizable Mass and Its Layered Design

We present an impedance-matched reduced version of acoustic cloaking whose mass is in a reasonable range. A layered cloak design with isotropic material is also proposed for the reduced cloak. Numerical calculations from the transfer matrix methods show that the present layered cloak can reduce the scattering of an air cylinder substantially.     

隐声衣结构设计和实验研究新进展

隐声衣是一项使物体隐藏于声场的新技术,与传统吸声方式相比,隐声衣消除回波时不会在目标背后留下声影区。隐声衣的物理实现是重点研究方向之一,利用具有特殊性质的材料或结构消除散射是获得隐声效果的主要途径。文章综述了隐声衣研究在结构设计和实验方面的几项新发展。包括基于超常材料的隐声衣、基于温度递度的隐声衣、应用反演设计方法的隐声衣、有源隐声衣等,主要介绍隐声衣机理和结构设计方面的新思想,以及新型人工材料和人工结构在隐声衣研究中的应用。     

Physical bounds on electromagnetic invisibility and the potential of superconducting cloaks

The possibility of suppressing the scattering cross section of an object is subject to fundamental physical bounds imposed by causality and passivity. Global cloaking limitations have been recently derived, which imply that any linear, causal and passive cloak necessarily increases the global scattering, integrated over the whole electromagnetic spectrum, compared to the uncloaked object. Here, we expand on this topic, discussing in detail an interesting exception to this limit represented by cloaks with static diamagnetism. In this context, we explore the potential of superconducting materials to realize global and local reduction of the scattering cross section. The concepts of plasmonic and mantle cloaking are extended to superconductors, realizing strong and tunable invisibility, with some unique properties stemming from the peculiar electrodynamics of superconductors. We conclude by qualitatively discussing a possible method to derive more stringent local bounds on cloaking.     

Acoustic radiation force of a Bessel beam on a porous sphere

The possibility of using acoustic Bessel beams to produce an axial pulling force on porous particles is examined in an exact manner. The mathematical model utilizes the appropriate partial-wave expansion method in spherical coordinates, while Biot's model is used to describe the wave motion within the poroelastic medium. Of particular interest here is to examine the feasibility of using Bessel beams for (a) acoustic manipulation of fine porous particles and (b) suppression of particle resonances. To verify the viability of the technique, the radiation force and scattering form-function are calculated for aluminum and silica foams at various porosities. Inspection of the results has shown that acoustic manipulation of low porosity (<0.3) spheres is similar to that of solid elastic spheres, but this behavior significantly changes at higher porosities. Results have also shown a strong correlation between the backscattered form-function and the regions of negative radiation force. It has also been observed that the high-order resonances of the particle can be effectively suppressed by choosing the beam conical angle such that the acoustic contribution from that particular mode vanishes. This investigation may be helpful in the development of acoustic tweezers for manipulation of micro-porous drug delivery carrier and contrast agents.     

基于等效参数反演的敷设声学覆盖层的水下圆柱壳体声散射研究

应用了一种等效方法计算敷设声学覆盖层无限长圆柱壳体水下声散射特性.等效方法的核心是忽略复杂声学覆盖层内部的声学结构,将其作为具有等效材料参数的均匀阻尼层进行建模,该均匀阻尼层具有和原覆盖层相同的复反射系数.进而,应用COMSOL Multiphysics软件建立敷设均匀阻尼层圆柱壳体的有限元模型并求解其声散射特性.等效方法的关键是等效材料参数的获取.采用充水阻抗管实验和有限元数值实验两种方法获取声学覆盖层贴敷在与壳体具有相同厚度、相同材料背衬条件下的复反射系数,在此基础上,基于遗传算法反演材料的等效参数.研究表明,等效参数具有频变特性,且尽管等效杨氏模量和等效泊松比在频率范围内存在较大波动,但是等效前后复反射系数仍保持一致.为了验证等效方法求解壳体声散射特性的准确性,同时建立了敷设声学覆盖层壳体的完整有限元模型,将覆盖层内部声学结构进行精细建模,并求其声散射特性.结果表明,两种方法求得的形态函数符合得较好,在整个频率范围内平均误差大约为1 d B.     

Acoustic cloaking by a superlens with single-negative materials

We propose a specific transformation in cloaking to make an acoustic sensor undetectable, in which the cloaking shell consists of complementary media with single-negative acoustic parameters instead of double-negative ones, and is proved to be a magnifying superlens. Moreover, the acoustical parameters of the cloak are completely independent of those of the host material as well as the cloaked object. This may significantly facilitate the experimental realization of acoustic cloaks and is of fundamental importance in a wide range of acoustics, optics, and engineering applications.     

基于主动声学超材料的圆柱声隐身斗篷设计研究

基于多层复合材料结构的二维声隐身斗篷设计思想, 利用主动隔膜声学空腔有效密度可以任意控制这一特性, 设计了主动声学超材料下的无限长圆柱声隐身斗篷. 给出了主动隔膜声学空腔单元的声电元件类比模拟电路图和具体的有效密度控制方法. 进行了主动声学超材料声隐身斗篷的结构建模, 并对平面入射波入射下此圆柱隐身斗篷周围声压分布场进行仿真计算. 结果表明, 平面波在一定频率范围内可以毫无阻碍地透过圆柱斗篷, 似乎不存在这种障碍物, 达到声隐身效果. 同时, 计算了主动声材料斗篷下总散射截面随频率变化曲线, 研究了此斗篷隐身效果随频率的变化特性. 本文从主动控制角度探讨实验实现隐身斗篷的技术问题, 有望给声隐身斗篷实验设计提供一条新的技术途径.     

Brillouin scattering study on elastic and piezoelectric properties of laser irradiated ZnO single crystals

Brillouin light scattering technique can be successfully used to determine the whole set of elastic and piezoelectric constants of a ZnO single crystal irradiated by different laser energy densities,into a micron range (radiation layer thickness).It is found that the scattering intensity,the linewidth and the Brillouin scattering shift of acoustic phonons are all strongly dependent on laser energy density.Based on the sound propagation equations and these results,the directional dependences of the compressional and shear moduli of the irradiated ZnO sample in the (001) plane are investigated.It is found that under an appropriate laser condition,248 nm KrF excimer laser irradiation can significantly improve the surface quality and increase the elastic properties of ZnO single crystal.This procedure has potential applications in the fabrication of ZnO-based surface acoustic wave and optic-electronic devices.     

Cloaking an acoustic sensor with single-negative materials

In this review, a brief introduction is given to the development of acoustic superlens cloaks that allow the cloaked object to receive signals while its presence is not sensed by the surrounding, which can be regarded as “cloaking an acoustic sensor”. Remarkably, the designed cloak consists of single-negative materials with parameters independent of the background medium or the sensor system, which is proven to be a magnifying superlens. This has facilitated significantly the design and fabrication of acoustic cloaks that generally require double-negative materials with customized parameters. Such innovative design has then been simplified further as a multi-layered structure comprising of two alternately arranged complementary media with homogeneous isotropic single-negative materials. Based on this, a scattering analyses method is developed for the numerical simulation of such multi-layered cloak structures, which may serve as an efficient approach for the investigation on such devices.     

Super-thin cloaks mediated by spoof surface plasmons

We demonstrated the possibility of designing super-thin electromagnetic cloaks based on spoof surface plasmon (SSP). Using a metamaterial layer, incident waves can be coupled into SSP efficiently at the air/metamaterial interface. Due to the strong surface confinement of SSP, EM waves are squeezed into and propagate in deep sub-wavelength scales. Implementation of an 8.2 GHz cloak less than 1/50 the cloaking diameter was presented using split ring resonator (SRR). Excellent cloaking effect was verified by simulations. Rather than isolating objects from the background, such cloaks can drastically enhance the field intensity around the cloaked object. This is of particular importance in applications such as weak wave detection and near-field sensing.     

A revisit to imperfect acoustic cloak of multi-layered shell structures considering sound speed and impedance matching

An imperfect multi-layered acoustic cloak is proposed for a two-dimensional cloaking zone based on feasible material properties. In this model, the matching of sound speed and acoustic impedance has been investigated, and the effects of material and geometric properties on the imperfect cloak have been studied for better design of the imperfect cloak. The imperfect cloak could be improved using appropriate changes in the design parameters. By increasing the thickness of the high density layer and with some changes in the sound speeds between the high density and the low density layers, the imperfect cloaking model showed better cloaking performance than Cummer–Schurig cloak. Also, present results show that the sound speed matching is more important for acoustic cloaking than the impedance matching. These results can be applied as a practical design guide for two-dimensional cloaks using multilayered structures composed of naturally existing materials.     

Sound-transparent anisotropic media for backscattering-immune wave manipulation

The scattering behavior of an anisotropic acoustic medium is analyzed to reveal the possibility of routing acoustic signals through the anisotropic layers with no backscattering loss. The sound-transparent effect of such a medium is achieved by independently modulating the anisotropic effective acoustic parameters in a specific order, and is experimentally observed in a bending waveguide by arranging the subwavelength structures in the bending part according to transformation acoustics. With the properly designed filling structures, the original distorted acoustic field in the bending waveguide is restored as if the wave travels along a straight path. The transmitted acoustic signal is maintained nearly the same as the incident modulated Gaussian pulse. The proposed schemes and the supporting results could be instructive for further acoustic manipulations such as wave steering, cloaking and beam splitting.     

Acoustic scattering by arbitrary distributions of disjoint, homogeneous cylinders or spheres

A T-matrix formulation is presented to compute acoustic scattering from arbitrary, disjoint distributions of cylinders or spheres, each with arbitrary, uniform acoustic properties. The generalized approach exploits the similarities in these scattering problems to present a single system of equations that is easily specialized to cylindrical or spherical scatterers. By employing field expansions based on orthogonal harmonic functions, continuity of pressure and normal particle velocity are directly enforced at each scatterer using diagonal, analytic expressions to eliminate the need for integral equations. The effect of a cylinder or sphere that encloses all other scatterers is simulated with an outer iterative procedure that decouples the inner-object solution from the effect of the enclosing object to improve computational efficiency when interactions among the interior objects are significant. Numerical results establish the validity and efficiency of the outer iteration procedure for nested objects. Two- and three-dimensional methods that employ this outer iteration are used to measure and characterize the accuracy of two-dimensional approximations to three-dimensional scattering of elevation-focused beams.     

Acoustic resonance scattering from a submerged anisotropic sphere

The resonance scattering theory (RST) is applied to the problem of sound scattering from an elastic transversely isotropic solid sphere suspended in an ideal acoustic fluid medium. The normal mode expansion technique in conjunction with the Frobenius power series solution method is utilized to deal with the material anisotropy. The presented model, which degenerates to the simple isotropic solution in the case of very weak anisotropy, is initially employed to study sensitivity of various resonant modes of vibration to perturbations in elements of the stiffness matrix. Employing a rigid background subtraction, the target’s spectrum of resonances is extracted from the relevant modal backscattering form functions and subsequently traced and discussed through Regge pole trajectory plots. Also, the backscattering form function and resonance spectra, along with the dispersion curves for selected transversely isotropic solid spheres with distinct degrees of material anisotropy, are calculated and discussed. The various modes of propagation associated with the Rayleigh, Whispering Gallery, and fluid-borne Scholte-Stoneley surface waves are identified and examined. Published in Russian in Akusticheskiĭ Zhurnal, 2008, Vol. 54, No. 2, pp. 205–218. The text was submitted by the authors in English.     

Pulling force of acoustic-vortex beams on centered elastic spheres based on the annular transducer model

To solve the difficulty of generating an ideal Bessel beam, an simplified annular transducer model is proposed to study the axial acoustic radiation force(ARF) and the corresponding negative ARF(pulling force) exerted on centered elastic spheres for acoustic-vortex(AV) beams of arbitrary orders. Based on the theory of acoustic scattering, the axial distributions of the velocity potential and the ARF for AV beams of different orders generated by the annular transducers with different physical sizes are simulated. It is proved that the pulling force can be generated by AV beams of arbitrary orders with multiple axial regions. The pulling force is more likely to exert on the sphere with a smaller k_0a(product of the wave number and the radius) for the AV beam with a bigger topological charge due to the strengthened off-axis acoustic scattering. The pulling force decreases with the increase of the axial distance for the sphere with a bigger k_0a.More pulling force areas with wider axial regions can be formed by AV beams using a bigger-sized annular transducer.The theoretical results demonstrate the feasibility of generating the pulling force along the axes of AV beams using the experimentally applicable circular array of planar transducers, and suggest application potentials for multi-position stable object manipulations in biomedical engineering.