基于局部位移校正的磁共振图像相干平均

多次扫描相干平均是提高磁共振图像信噪比的常用方法,但如果在多次扫描过程中病人发生自主或不自主的运动,使得图像中的组织发生位移,简单相干平均图像会导致图像模糊.本文受非局域均值算法的启发,提出了一种基于局部位移校正的相干平均方法.该算法通过比较多次采集的图像中组织结构的局部相似性,找出图像间的局部位移,利用该信息修正位移后进行加权平均,从而达到提高图像信噪比的目的.我们用模型及真实的肝脏弥散数据进行了实验.实验结果表明,对于不同次采样间存在运动的磁共振图像,该算法可有效地提高信噪比并保持结构边缘;其结果优于简单的相干平均,去噪效果也优于经典的非局域均值算法.     

自导航快速自旋回波在低场MRI上的实现

低场磁共振成像仪一般需采用数据累加的办法来提高图像信噪比,这样会延长扫描时间,因此更易受运动伪影的影响. 为了解决运动伪影问题,本文在低场磁共振成像仪上实现了自导航快速自旋回波去运动伪影成像技术,并且与常规快速自旋回波序列进行了临床对比实验. 结果表明,与常规快速自旋回波序列相比,采用自导航快速自旋回波技术后,由于病人运动导致的伪影得到明显地抑制.      

利用动态接收增益提高磁共振成像信噪比的方法

提出了一种提高磁共振成像(MRI)信噪比的有效方法.该方法在每次采集回波信号前,能够快速、灵活地控制MRI接收机的增益,实现磁共振信号动态范围的压缩;在图像重建之前采用双精度浮点运算扩展动态范围压缩的磁共振信号,最终得到信噪比提高的重建图像.在1.5 T超导MRI系统上进行了自旋回波序列的水模成像,实验结果表明,相比传统的基于固定接收增益的扫描图像,利用该方法得到的T1加权图像信噪比可以提高10%.和其他提高磁共振信号动态范围的方法相比,该方法无需增加额外硬件电路,避免多次采集图像,因而具有实现成本低的优点,是一种提高MRI信噪比的有效方法.     

刀锋伪影校正技术在精神疾病患者海马MRI检查中的应用

为探讨磁共振刀锋伪影校正（BLADE）技术提升精神疾病患者海马磁共振图像质量的效果，本文分别使用结合了BLADE技术的BLADE T₂WI TSE、BLADE T₂WI FLAIR及传统T₂WI TSE、T₂WI FLAIR四种序列，对47例精神疾病患者和美国放射学院（ACR）标准模体在3.0 T磁共振成像（MRI）设备上分别进行常规海马斜冠状位扫描和ACR标准检测.患者的磁共振图像由2名放射科医师采用5分法对运动伪影、搏动伪影、颗粒度、海马磁共振图像质量进行评价，并应用Wilcoxon符号秩检验进行数据分析.模体图像通过识别图像的钻孔阵列和轮辐的数目，半定量评价各序列的高对比空间分辨力（HCSR）和低对比物体探测能力（LCD）.结果表明相比传统序列，结合BLADE技术的序列能够明显改善海马磁共振图像的运动伪影、搏动伪影（p<0.001），提高图像质量（p<0.05）；但在图像颗粒度方面，传统序列表现更优（p<0.001）.ACR模体半定量分析显示，结合BLADE技术序列与传统序列相比，在LCD检测方面结果更优、在HCSR检测方面结果相同或略逊.本文推荐将BLADE技术应用于不合作的精神疾病患者海马的MRI检查.     

面向机器人磨抛的激光点云获取及去噪算法

为了保证工业机器人磨抛的加工质量,利用激光扫描技术对机器人夹持工件的形状误差以及装夹误差进行测量和评估,包括点云数据的获取和去噪。采用条纹式激光扫描仪配合直线匀速运动对机器人末端夹持工件进行扫描,通过调节测量和运动参数,获取近似网格点云。为了去除点云中存在的大尺度噪点,在K近邻均值滤波(KNNMF)算法基础上,提出了基于局部均值的K近邻均值滤波(LMKMF)算法对偏大的数据点进行局部预先滤波,并建立相关数学模型。以峰值信噪比作为评价标准,以实际测量点云样本为测试对象进行去噪测试。结果表明,相比标准的KNNMF算法,结合LMKMF预先滤波的KNNMF算法在30%噪点密度下去噪能力提升了53.78%,证实了其在高密度噪点下具有更好的去噪能力和特征保持能力。     

增强低场下脑功能磁共振成像显著性的研究

实现了基于低场0.35 T磁共振成像系统的大脑功能磁共振成像（functional Magnetic Resonance Imaging,fMRI）的研究. 基于质子密度加权的快速自旋回波(Turbo Spin Echo,TSE)图像,重点研究增强低场fMRI显著性的方法,目的在于提高低场fMRI的可用性. 结果表明：健康受试者在执行手动任务期间,大脑运动区的信号强度变化可以由基于血管外质子信号增强 (Signal Enhancement by Extravascular water Protons,EEP)的对比机制探测. 优化TSE序列参数能提高图像SNR和扫描速度,并在统计分析中增加外在屏蔽图像,可以有效地提高低场下fMRI研究结果的显著性.     

一种结合并行成像和压缩感知的快速磁共振成像新方法

压缩感知（CS）技术和并行成像技术（主要是SENSE技术、GRAPPA技术等）都能通过减少k空间数据的采集量来加快磁共振成像速度,目前已有一些将两种方法相结合进一步加速磁共振成像速度的方法（例如CS-GRAPPA）.本文针对数据采集和重建这两方面对现有CS-GRAPPA方法进行了改进,采集方式上采用了局部等间隔采集模板以满足GRAPPA重建的要求,并对采集模板进行随机放置以满足CS重建的要求;数据重建时,根据自动校正数据估算GRAPPA算法中欠采行的重建误差,并利用误差的大小确定在CS算法中保真的程度.不同磁共振图像重建实验的结果表明：与现有方法相比,本文方法能够更好地保留原有图像细节并有效减少伪影.     

基于同时多层激发和并行成像的心脏磁共振电影成像

磁共振成像（MRI）无创无害、对比度多、可以任意剖面成像的特点特别适合用于心脏成像,却因扫描时间长限制了其在临床上的应用.为了解决心脏磁共振电影成像屏气扫描时间过长的问题,该文提出了一种基于同时多层激发的多倍加速心脏磁共振电影成像及其影像重建的方法,该方法将相位调制多层激发（CAIPIRINHA）技术与并行加速（PPA）技术相结合,运用到分段采集心脏电影成像序列中,实现了在相位编码方向和选层方向的四倍加速,并使用改进的SENSE/GRAPPA算法对图像进行重建.分别在水模以及人体上进行了实验,将加速序列图像与不加速序列图像进行对比,结果验证了重建算法的有效性,表明该方法可以在保障图像质量以及准确测量心脏功能的前提下成倍节省扫描时间.     

用于MR图像非局域均值去噪的边缘增强策略

非局域均值(NLM)滤波有很好的去噪效果并已成功地应用于磁共振图像的去噪中,但与所有去噪方法相同,总是会在一定程度上模糊图像细节. 该文提出将从原始图像中提取出来的高频信息与NLM去噪图像相融合,来还原在去噪过程中丢失的细节. 首先利用一种基于拉普拉斯金字塔的多分辨率方法,从原始图像中提取出包含丰富的边缘信息的高频组分. 然后利用作者提出的一种新的基于SUSAN算子的边缘检测算子产生一幅连续的边缘图,并利用该边缘图将高频组分与NLM方法去噪的图像相融合. 该方法在图像的平滑区域取得了良好的去噪效果,同时可以保留甚至增强图像的细节. 同时,该方法对图像的增强不会导致增强图像中常见的伪影.     

基于AI+MRI的影像诊断的样本增广与批量标注方法

训练样本是所有领域人工智能（AI）研发的关键因素.目前，基于人工智能+磁共振成像（AI+MRI）的影像诊断存在着训练样本的有效标注数量和类型无法满足研发需求的瓶颈问题.本文利用临床MRI设备对志愿者或阳性病例进行正常或重点病灶区的定量扫描，获取高分辨率各向同性的纵向弛豫时间（T₁）、横向弛豫时间（T₂）、质子密度（Pd）和表观扩散系数（ADC）等物理信息的多维数据矩阵，作为原始数据.开发虚拟MRI技术平台，对原始数据（相当于数字人体样本）进行虚拟扫描，实现不同序列不同参数下的多种类磁共振图像输出.选择感兴趣组织具有最好边界区分度的图像种类，经有经验的影像医生对其进行手动勾画并轨迹跟踪形成三维MASK标注矩阵，作为其他种类图像的图像勾画标注模板，从而实现低成本、高效率的MRI样本增广和批量标注.该平台以临床少量阳性病例作为输入，进行样本增广和标注，极大地减少AI对实际扫描样本的要求，降低了影像医生的精力和时间投入，极大地节省了成本，并输出了数量足够的磁共振图像，为基于AI+MRI的影像诊断研发提供低成本的训练数据解决方案.     

Single infrared image super-resolution combining non-local means with kernel regression

In many infrared imaging systems, the focal plane array is not sufficient dense to adequately sample the scene with the desired field of view. Therefore, there are not enough high frequency details in the infrared image generally. Super-resolution (SR) technology can be used to increase the resolution of low-resolution (LR) infrared image. In this paper, a novel super-resolution algorithm is proposed based on non-local means (NLM) and steering kernel regression (SKR). Based on that there are a large number of similar patches within an infrared image, NLM method can abstract the non-local similarity information and then the value of high-resolution (HR) pixel can be estimated. SKR method is derived based on the local smoothness of the natural images. In this paper the SKR is used to give the regularization term which can restrict the image noise and protect image edges. The estimated SR image is obtained by minimizing a cost function. In the experiments the proposed algorithm is compared with state-of-the-art algorithms. The comparison results show that the proposed method is robust to the noise and it can restore higher quality image both in quantitative term and visual effect.     

Non-local means algorithm with adaptive patch size and bandwidth

Non-local means algorithm is an effective denoising method that consists in some kind of averaging process carried on similar patches in a noisy image. Some internal parameters, such as patch size and bandwidth, strongly influence the performance of non-local means, but with the difficulty of tuning. Many solutions for choosing these two parameters, like cross-validation and Steins unbiased risk estimate criterion, are successful but computationally heavy. In this paper, we introduce a new feature metric that is capable of providing a quantitative measure of geometric structures of image in the presence of noise. The proposed region-based non-local means method first classifies a noisy image into several regions. Then, a local window and a local bandwidth value are selected pixel-wisely according to the property of each region and the local value of the new feature metric. Experiments on standard test images show that the proposed method outperforms the original non-local means version by around 1.34 dB and is comparable to or better than the performance of the current state-of-the-art non-local means based denoising algorithms, both visually and quantitatively.     

Laplacian based non-local means denoising of MR images with Rician noise

Magnetic Resonance (MR) image is often corrupted with a complex white Gaussian noise (Rician noise) which is signal dependent. Considering the special characteristics of Rician noise, we carry out nonlocal means denoising on squared magnitude images and compensate the introduced bias. In this paper, we propose an algorithm which not only preserves the edges and fine structures but also performs efficient denoising. For this purpose we have used a Laplacian of Gaussian (LoG) filter in conjunction with a nonlocal means filter (NLM). Further, to enhance the edges and to accelerate the filtering process, only a few similar patches have been preselected on the basis of closeness in edge and inverted mean values. Experiments have been conducted on both simulated and clinical data sets. The qualitative and quantitative measures demonstrate the efficacy of the proposed method.     

基于梯度和小波变换的水下距离选通图像去噪

水体的散射效应、激光光斑、成像器件的非理想化等因素使得图像出现大量无规律粒状噪声,它们增加了水下距离选通图像的背景噪声,模糊了目标轮廓,掩盖了目标细节,降低了图像的信噪比。针对上述问题本文提出了一种基于梯度和小波变换的去噪方法。首先对图像进行余弦小波变换,得到不同频率空间的图像集。低频空间引入新的图像梯度强化方法以提高图像的纹理信息量;对应非均匀性条带的LH或HL空间做曲面拟合处理以消除非均匀性条带的影响;在HH空间去噪过程中,低层空间做非局部均值处理以保留图像相似信息,高层空间做分数阶积分处理以保留图像细节信息。最后小波逆变换得到结果图像。从实验水槽中采集水下图像进行算法验证,将改进方法与已有算法比对分析。实验表明,本文所研究的水下去噪算法,能够平滑噪声且更大限度地保留图像细节纹理,在客观评价指标上提升了6%。     

Two-stage non-local means filtering with adaptive smoothing parameter

Non-local means (NLM) filtering is an efficacious algorithm in image denoising which searches the similar neighborhoods and estimates the pixel by averaging these neighborhoods. Some internal parameters such as patch size, search window size and smoothing strength have serious effects on filtering performance. This paper proposes an improved version of NLM by using weak textured patches based single image noise estimation and two-stage NLM with adaptive smoothing parameter. Our proposed method firstly applies weak textured patches based noise estimation to achieve the noise level of input noisy image. Then relying on the estimated noise level, we apply the first stage NLM with adaptive smoothing parameter to attain a basic denoised image. After that, the basic denoised image is refined by the second stage of NLM with smaller smoothing strength. Our experimental results show that the proposed algorithm outperforms the NLM and some NLM recent variants both in visual quality and numerical measures. Additionally, the potential halo effect is almost eliminated in the result images produced by our proposed method.     

Rician noise reduction in magnetic resonance images using adaptive non-local mean and guided image filtering

This paper proposes a Rician noise reduction method for magnetic resonance (MR) images. The proposed method is based on adaptive non-local mean and guided image filtering techniques. In the first phase, a guidance image is obtained from the noisy image through an adaptive non-local mean filter. Sobel operators are applied to compute the strength of edges which is further used to control the spread of the kernel in non-local mean filtering. In the second phase, the noisy and the guidance images are provided to the guided image filter as input to restore the noise-free image. The improved performance of the proposed method is investigated using the simulated and real data sets of MR images. Its performance is also compared with the previously proposed state-of-the art methods. Comparative analysis demonstrates the superiority of the proposed scheme over the existing approaches.     

A wavelet-based method for improving signal-to-noise ratio and contrast in MR images

Magnetic resonance (MR) images acquired with fast measurement often display poor signal-to-noise ratio (SNR) and contrast. With the advent of high temporal resolution imaging, there is a growing need to remove these noise artifacts. The noise in magnitude MR images is signal-dependent (Rician), whereas most de-noising algorithms assume additive Gaussian (white) noise. However, the Rician distribution only looks Gaussian at high SNR. Some recent work by Nowak employs a wavelet-based method for de-noising the square magnitude images, and explicitly takes into account the Rician nature of the noise distribution. In this article, we apply a wavelet de-noising algorithm directly to the complex image obtained as the Fourier transform of the raw k-space two-channel (real and imaginary) data. By retaining the complex image, we are able to de-noise not only magnitude images but also phase images. A multiscale (complex) wavelet-domain Wiener-type filter is derived. The algorithm preserves edges better when the Haar wavelet rather than smoother wavelets, such as those of Daubechies, are used. The algorithm was tested on a simulated image to which various levels of noise were added, on several EPI image sequences, each of different SNR, and on a pair of low SNR MR micro-images acquired using gradient echo and spin echo sequences. For the simulated data, the original image could be well recovered even for high values of noise (SNR approximately 0 dB), suggesting that the present algorithm may provide better recovery of the contrast than Nowak's method. The mean-square error, bias, and variance are computed for the simulated images. Over a range of amounts of added noise, the present method is shown to give smaller bias than when using a soft threshold, and smaller variance than a hard threshold; in general, it provides a better bias-variance balance than either hard or soft threshold methods. For the EPI (MR) images, contrast improvements of up to 8% (for SNR = 33 dB) were found. In general, the improvement in contrast was greater the lower the original SNR, for example, up to 50% contrast improvement for SNR of about 20 dB in micro-imaging. Applications of the algorithm to the segmentation of medical images, to micro-imaging and angiography (where the correct preservation of phase is important for flow encoding to be possible), as well as to de-noising time series of functional MR images, are discussed.     

Simple and effective method to improve the signal-to-noise ratio of compressive imaging

This Letter presents a simple and effective method to improve the signal-to-noise ratio(SNR) of compressing imaging. The main principles of the proposed method are the correlation of the image signals and the randomness of the noise. Multiple low SNR images are reconstructed firstly by the compressed sensing reconstruction algorithm, and then two-dimensional time delay integration technology is adopted to improve the SNR. Results show that the proposed method can improve the SNR performance efficiently and it is easy to apply the a lgorithm to the real project.     

Noise suppression and details enhancement for infrared image via novel prior

Infrared images always suffer from blurring edges, fewer details and low signal-to-noise ratio. So, sharpening edges and suppressing noise become the urgent techniques in infrared image technology field. However, they are contradictories in most cases. Hence, to depict correctly infrared image features under low signal-to-noise ratio circumstance, a novel prior, which is immune to noise, is presented in this paper. The proposed method scopes noise suppression and details enhancement. In noise suppression, the prior is introduced into Bayesian model to obtain optimal estimation through iteration. In details enhancement, based on the proposed prior, the final image is obtained by the improved unsharp mask algorithm which enhances adaptively details and edges of optimal estimation. The effectiveness and robustness of the proposed method is analyzed by testing the infrared images obtained from different signal-to-noise ratio conditions. Compared with other well-established methods, the proposed method shows a significant performance in terms of noise suppression, actual scene reappearance, enhancing the details and sharpening edges.