二乙烯基苯泡沫空心球微流体成型技术

基于微流体成型技术,设计开发了一套用于微胶囊制备的T型微通道乳粒发生器,并利用该装置实现了二乙烯基苯空心泡沫微球的连续制备。以二乙烯基苯的邻苯二甲酸二丁酯溶液为油相,以聚乙烯醇的水溶液为外水相,去离子水为内水相,成功制备出二乙烯基苯双重微乳液,并采用水平旋转加热装置使其凝胶固化,再经过溶剂交换、CO2超临界干燥等过程,制备出直径700～1200μm、壁厚60～100μm、密度90～120mg.cm-3的二乙烯基苯空心泡沫微球。利用光学显微镜、扫描电镜和X-透射显微镜表征,结果显示:微胶囊球形度、同心度和壁厚均匀性较好,成活率较高,直径单分散性较好,外表面较粗糙。     

ICF氘代固体靶的研制

 以自制全氘代苯乙烯单体(氘代率99%)为原料, 以偶氮二异丁腈为引发剂, 经自由基本体聚合反应, 先制得全氘代聚苯乙烯, 最后采用乳液微封装技术制得了直径150～450μm、壁厚2～15μm、球形度≥99.5%、同心度95%～98%、表面粗糙度＜30nm的ICF固体靶用空心微球。介绍了制备工艺,并对全氘代聚笨乙烯分子量及其分布的控制,微球壁内气泡形成机理,微球储存稳定性等进行了初步探讨。     

液滴法制备高尺度比玻璃微球壳的研究

 定量给出了液滴法制备玻璃微球壳（HGM）的直径与壁厚之间的依存关系,确定了制备大直径薄壁HGM的液滴炉温度分布、抽气速率、溶液浓度和液滴发生器操作参数等工艺条件,制备出直径为300～450μm、壁厚为0.7～1.2μm、尺度比为300～700的HGM,表面粗糙度优于10nm,球形度和同心度均优于97%,耐外压能力大于0.91MPa,耐内压能力至少大于0.43MPa。     

臭氧改性及搅拌桨结构对大直径双层球制备的影响

随着高功率激光器的飞速发展,ICF物理实验对聚苯乙烯（PS）-聚乙烯醇（PVA）双层空心微球的规格要求逐渐提高,直径要求将达到700～900 m。针对该直径范围的PS-PVA双层空心微球,通过采用PS球臭氧化表面改性技术和搅拌桨叶轮结构优化技术,对传统乳液微封装法制备双层空心微球工艺进行了改进,臭氧化表面改性后PS固体核心发生憎水-亲水转变,提高了PS与PVA之间的作用强度;搅拌桨叶轮结构优化,改善了体系容器内溶液流场均匀性,使得微球在整个体系中的运动相对平稳,从而初步制得了直径范围在700～900 m的双层空心微球。     

微流控技术中双重乳粒尺寸调控规律的研究

在采用乳液微封装技术制备惯性聚变用聚-α-甲基苯乙烯(PAMS)靶丸芯轴过程中,以氟苯为油相溶剂,水溶性聚合物水溶液为外水相制备水包油包水(W1/O/W2)双重复合乳粒,对复合乳粒进行固化干燥得到PAMS靶丸芯轴.本文设计搭建了一套双重同轴乳粒发生器,用微流控技术产生PAMS靶丸复合乳粒,该乳粒发生器采用两种不同结构:"两步法"通道与"一步法"通道.研究了利用此乳粒发生器制备复合乳粒过程中,乳粒形成机理及三相流速对乳粒尺寸调控规律.实验结果显示,乳粒发生器结构上的细小差异会极大地影响乳粒形成机理以及尺寸变化规律.在"两步法"通道结构中,内水相流速对复合乳粒的形成及外径无明显影响,而外径随外水相流速的变化规律与单乳粒实心液滴(O/W2)尺寸变化规律相同;在固定体系中,乳粒尺寸取决于内水相与油相流速之和及外水相流速,而与内水相和油相流速之比无关.然而在"一步法"通道中,由于W1-O界面的存在,内水相流速对复合乳粒外径的影响非常大;复合乳粒外径不仅与内层相界面的界面张力大小有关,还与内水相与油相流速之比有关.最后,将实验中的双重复合乳粒置于水溶性聚合物水溶液中进行固化,得到毫米级空心聚合物微球.     

低温冷冻靶微管燃料充注流动冷凝特性

低温冷冻靶是惯性约束核聚变装置的关键部件之一。冷冻靶靶丸位于黑腔内部,需要利用微管完成燃料充注。针对燃料在微管内发生气液相变后流入靶丸这一关键过程,研究了微通道流体与常规流体流动传热的差异。基于微通道特性对流体流动传热方程进行修正,同时建立了气液相变模型,对微充气管内燃料充注过程进行了数值计算分析。得到重力和表面张力的影响,在微通道中,重力作用可以忽略,表面张力起重要作用。得到了微尺度效应包括速度滑移和温度跳跃对流动传热过程的影响。对多种充气管结构进行比较分析,为选型提供指导。通过选择不同进口条件和出口条件,对充注量控制和充注条件选择提供了指导方案,实际充注时需要同时提高进口温度和压力,保证连续可控充注。     

多孔肋微通道相变微胶囊悬浮液的传热分析

为了提高微通道热沉的水力性能和热力性能,采用等效比热容法对相变微胶囊悬浮液在固体肋和多孔肋微通道热沉内的流动与传热特性进行研究。结果表明：多孔肋可以使微通道热沉的压降显著降低,对热阻的影响随微通道内冷却剂流动距离变化。相变微胶囊悬浮液相变吸收潜热可以减小微通道热沉的热阻,但是粘度增大使得压降增大。多孔肋和相变微胶囊悬浮液都能提高微通道热沉的综合性能,相变微胶囊悬浮液在多孔肋微通道热沉中比水在固体肋微通道热沉中的综合性能提高了14%。     

ICF玻璃靶丸化学镀磁性Ni-P涂层的研究

 采用化学镀方法对ICF空心玻璃微球靶丸进行处理，使其表面均匀包覆一层磁性Ni-P合金镀层，从而使得ICF玻璃靶丸具有一定的磁性，可望用于进行磁悬浮ICF定位打靶实验研究。用X射线衍射仪、扫描电子显微镜和振动样品磁强计对涂层的组成、结构、形貌及磁性能进行了表征。结果表明：对 ICF玻璃靶丸进行化学镀处理，其球形度、同心度和壁厚均匀性都与化学镀前未发生明显改变，其饱和磁化强度和矫顽力分别为3.883×10^-3 A/g和1.046×^-3 T。     

微腔内气体抽离的多尺度模拟与分析

基于适用于整个克努森数范围的流动理论,建立了去除惯性约束聚变实验中靶丸内空气的理论模型,并设计实验验证了此模型的可靠性。物理实验要求靶丸内空气浓度低于10×10?6,数值模拟了去除靶丸内空气的过程,重点分析了靶丸内空气浓度、压力与除气时间的关系。计算并比较了单管路一次抽气法、单管路循环抽气法与双管路流洗法三种去除靶丸内空气方法的时间成本。数值计算结果表明:单管路一次抽气法中,靶丸上的微通道的存在对去除靶丸内空气所需时间的影响不可忽略,在考虑靶丸上微通道与充气管的情况下,需要1961.77 h才能使靶丸内的空气浓度达到标准。单管路循环抽气法中,抽气次数与单次抽气程度会影响去除靶丸内空气所需总时间,在单次抽气程度值取最优的情况下,采用充三次,抽四次的方案可使达标总时间减少至1 h左右,此方案下单次充气和抽气时间分别为6 min和10 min。而采用双管路流洗法则仅需11 min便可使靶丸内空气浓度达标。     

磁性ICF靶丸的化学镀工艺制备与表征

 采用化学镀工艺在ICF聚苯乙烯靶丸表面包覆了一层磁性的Ni-P合金镀层，并分别用扫描电子显微镜、能谱仪、X射线衍射仪以及振动样品磁强计对其形貌、组成、结构和磁性能进行了表征。结果表明：通过化学镀工艺制备的Ni-P合金镀层厚度约为4 μm，且为非晶结构，并具有一定的磁性；该磁性ICF靶丸可望用来进行磁悬浮实验研究。最后，对聚苯乙烯靶丸表面磁性涂层的制备机理进行了讨论。     

Effect of ultrasound on the preparation of soy protein isolate-maltodextrin embedded hemp seed oil microcapsules and the establishment of oxidation kinetics models

In this study, microcapsules were prepared by spray drying and embedding hemp seed oil (HSO) with soy protein isolate (SPI) and maltodextrin (MD) as wall materials. The effect of ultrasonic power on the microstructure and characteristics of the composite emulsion and microcapsules was studied. Studies have shown that ultrasonic power has a significant impact on the stability of composite emulsions. The particle size of the composite emulsion after 450 W ultrasonic treatment was significantly lower than the particle size of the emulsion without the ultrasonic treatment. Through fluorescence microscopy observation, HSO was found to be successfully embedded in the wall materials to form an oil/water (O/W) composite emulsion. The spray-dried microcapsules showed a smooth spherical structure through scanning electron microscopy (SEM), and the particle size was 10.7 μm at 450 W. Fourier transform infrared (FTIR) spectroscopy analysis found that ultrasonic treatment would increase the degree of covalent bonding of the SPI-MD complex to a certain extent, thereby improving the stability and embedding effect of the microcapsules. Finally, oxidation kinetics models of HSO and HSO microcapsules were constructed and verified. The zero-order model of HSO microcapsules was found to have a higher degree of fit; after verification, the model can better reflect the quality changes of HSO microcapsules during storage.     

Preparation of calcium alginate microcapsules containing n-nonadecane by a melt coaxial electrospray method

A novel method called melt coaxial electrospray was used to produce phase change material (PCM) microcapsules with sodium alginate as the shell and n-nonadecane as the core. The effect of production parameters on microcapsule size and structure was studied. The microcapsules were characterized using optical microscopy and Fourier transform infrared (FTIR) spectroscopy. The thermal behavior of PCM microcapsules was measured by differential scanning calorimetry (DSC). The results of FTIR and DSC confirmed the successful melt coaxial electrospraying of PCMs. Careful control of production parameters yielded spherical PCM microcapsules with diameter lower than 100 μm and 56 ± 5% encapsulation ratio.     

Impedance spectroscopy and investigation of conduction mechanism in BaMnO3 nanorods

BaMnO₃ nanorods were synthesized at 200 °C and atmospheric pressure using the composite-hydroxide mediated method. X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to investigate the structure, size, morphology, phase purity and elemental composition of BaMnO₃ nanorods. Electrical characterization of BaMnO₃ pellet was performed at 300-400 K and in the frequency range 200 Hz-2 MHz. Temperature dependence of AC conductivity suggests that the BaMnO₃ pellet behaves as a semiconducting material and conduction across the pellet can be explained by the correlated barrier hopping model. Impedance analysis was performed using the equivalent circuit model (R₁Q₁C₁)(R₂C₂) and it suggests a single relaxation process in the BaMnO₃ pellet at a particular temperature. The analysis reveals that the BaMnO₃ pellet behaves like an n-type semiconductor material due to the presence of oxygen vacancies and some disorder. Modulus spectroscopy also supports the impedance results.     

T型微通道制备可控粒径SiO2的微球数值模拟

通过数值模拟对T型通道中微液滴粒径控制的主要因素进行探讨,并结合实验验证确定了稳定控制液滴粒径的条件。结果表明离散相与连续相入口管径比及流速比是控制粒径的主要因素,并获得了50,80,120 m粒径的SiO2微球（入口管径比为5,流速比为4,6,10）,其球形度大于93%,单分散性小于5%。实验结果与数值模拟匹配性较好。     

Study on the emulsification and oxidative stability of ovalbumin-pectin-pumpkin seed oil emulsions using ovalbumin solution prepared by ultrasound

Pumpkin seed oil (PSO), which is a valuable compound with high nutritional value used for the prevention of various chronic diseases, is prone to oxidation. In this work, small and uniform (su) ovalbumin (OVA) and pectin (PEC) were used to stabilize PSO in the form of an emulsion. The results showed that suOVA-PEC-PSO emulsion with a droplet size of 9.82 ± 0.05 μm was successfully self-assembled from PSO, PEC, and suOVA solution (with a droplet size of 230.13 ± 14.10 nm) treated with 300 W ultrasound, owing to the formation of a more stable interfacial film on the surface of droplets. The interfacial, rheological, emulsifying, and antioxidant properties of the suOVA-PES-PSO emulsions were excellent, owing to the synergistic effects between PEC and suOVA solution. Moreover, the physical stability of the suOVA-PEC-PSO emulsions to salt stress, a freeze-thaw cycle, and heat treatment was also increased and the oxidation of linolenic acid was notably delayed. These results have extended the food-related applications of OVA and PSO, and provide a promising foundation for further exploration of the self-assembly of composite emulsions by small and uniform proteins.     

Solute Permeability of Certain Polymeric Films Applied on Aspirin Crystals to Form Microcapsules

A study was carried out to investigate the solute permeability of various polymer films applied on aspirin crystal to form microcapsules. The coating materials were an acrylate methacrylate (AMA), poly 3‐hydroxybutyrate‐hydroxyvalerate (Biopol^®) and poly (lactic‐glycolic) acid (PLGA). Organic solutions of the polymers were applied on the aspirin crystals (core) by a spray coating technique in a Wurster column. The microcapsule surfaces were investigated using scanning electron microscopy (SEM), while permeability studies were carried out on single microcapsules serving as micro dialysis cells. The amount of drug (m) permeating through the applied films in time (t) was analysed on the basis of Fickian diffusion. The SEM revealed numerous surface pores of size range 2.4 to 24 μm for the AMA films, while the PLGA and Biopol films, on the other hand, exhibited very few surface pores of size range 2.2 to 18 μm. However, the AMA films were more spongy than the PLGA and Biopol. The AMA films displayed a retarded release while the PLGA or Biopol films displayed a burst release, attributable to the differences in the film's porous structure. The Permeability coefficient (P) depended on the core weight of the single microcapsules, decreasing with increase in core weight. Thus, for an ensemble of the microcapsules the permeability coefficients of the films of the component microcapsules will have a distribution of P values even though the coating material is the same. This finding is important in the simulation of drug release from coated multiparticulate systems.     

滤光片式双视场成像光谱仪光学系统设计

为了满足机载搜索与跟踪系统的实际使用要求,根据变焦系统的基本理论和成像光谱系统的特点,设计一个滤光片式双视场成像光谱仪光学系统实例。系统采用1/3英寸CCD接收,像元尺寸为6.0 m6.0 m。通过高斯法分析与求解得到初始结构,使用Zemax软件对其优化,实现0.45 m～0.7 m/0.6 m～0.95 m双波段清晰成像,通过轴向移动变倍组完成139.75/32.25双视场转换,在视场切换过程中,F数为5.6且恒定不变。设计结果表明:在各谱段下系统宽视场畸变3.5%,窄视场畸变0.2%,探测器的Nyquist频率50 lp/mm处光学传递函数的峰值均大于0.5,系统的最小后截距大于35 mm,用以安装滤光片轮,满足装配要求。     

纳秒激光烧蚀下液态金属表面微结构的形成

首次发现了在不同保护气体及多脉冲uV—IR激光的照射下,液态金属的微型突起和微结构的形成。测量表明,针对不同的金属和保护气,这种结构的单脉冲生成速率可达（5—20）μm／pulse,形成了长度为1～2mm,直径约为焦点两倍的单个微型突起。最后,介绍了控制微结构形状的可能性,并讨论了它们的应用潜力。     

Ultrasound pre-fractured casein and in-situ formation of high internal phase emulsions

Traditional preparation of protein particles is usually complex and tedious, which is a major issue in the development of Pickering high internal phase emulsions (HIPEs). In this study, a facile and in-situ method for the preparation of food-grade Pickering HIPEs was developed using ultrasound pre-fractured casein flocs. The ultrasonic-treated casein protein and resulting Pickering HIPEs were characterised using particle size distribution, confocal laser scanning microscopy (CLSM), cryo-SEM, and rheological measurement. The results indicated that pH values of casein and ultrasonic power level were key parameters for casein protein dispersion into nanoparticles to form o/w Pickering HIPEs. In optimal conditions, the hexagons of emulsion droplets were close together, and the emulsions formed with ultrasonic caseins exhibited gel-like behaviour. Additionally, ultrasonic microscale-sized caseins (about 25 μm) disappeared upon the use of high speed homogenisation during the formation of HIPEs, while the chemical distribution revealed by confocal laser scanning microscopy indicated that the dispersive nanoparticles from casein proteins were evidently absorbed on the interface of HIPEs (cryo-SEM). These findings prove that ultrasound is an effective tool to loosen casein flocs to induce the in-situ formation of stabilised Pickering HIPEs. Overall, this work provides a green and facile route to convert edible oil into a soft solid, which has great potential for applications in biomedical materials, 3D printing technology, and various cosmetics.     

Self-healing coatings containing microcapsule

Effectiveness of epoxy resin filled microcapsules was investigated for healing of cracks generated in coatings. Microcapsules were prepared by in situ polymerization of urea-formaldehyde resin to form shell over epoxy resin droplets. Characteristics of these capsules were studied by 3D measuring laser microscope, particle size analyzer, Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimeter (DSC) to investigate their surface morphology, size distribution, chemical structure and thermal stability, respectively. The results indicate that microcapsules containing epoxy resins can be synthesized successfully. The size is around 100 μm. The rough outer surface of microcapsule is composed of agglomerated urea-formaldehyde nanoparticles. The size and surface morphology of microcapsule can be controlled by selecting different processing parameters. The microcapsules basically exhibit good storage stability at room temperature, and they are chemically stable before the heating temperature is up to approximately 200 °C. The model system of self-healing coating consists of epoxy resin matrix, 10 wt% microencapsulated healing agent, 2 wt% catalyst solution. The self-healing function of this coating system is evaluated through self-healing testing of damaged and healed coated steel samples.