基于虚拟样机技术的四足机器人静态稳定步态规划

针对现有技术文献中广泛使用的多种静态稳定步态中速度稳定性与稳定裕度不可兼得的通病,在随动质心的静态步态基础上,利用参数化坐标变换矩阵方法规划出一种四足机器人前进过程中质心以曲线轨迹移动的静态步态方法,使该步态方法以连续性速度运动的过程中保证一定稳定裕度。通过D-H法求得四足机器人的逆运动学坐标变换矩阵,分别在三维空间中对四足机器人的四组足端轨迹方程进行规划,并带入MATLAB软件后以逆运动学方程计算出关节夹角驱动方程,利用步态规划图求出机器人四条腿各自对应的夹角驱动方程以及机体质心轨迹方程。最后在MSC.ADAMS软件中建立四足机器人虚拟样机并对规划的步态进行虚拟仿真,仿真结果验证了该步态对提升四足机器人对于速度连续性以及稳定裕度的提升。     

基于倒立摆模型的四足机器人对角步态规划

为提高点着地四足机器人在匀速对角小跑过程中的动态稳定性,将对角小跑过程简化为一个倒立摆模型。针对四足机器人对角小跑过程中由于重心无法始终处于支撑对角线上所引起的翻转,在此模型中转换为由于重心引起的摆动角误差。采用虚位移原理对机器人摆动角的变化进行分析,确定不同重心运动变化对摆动角误差的影响并找到合适的重心起始位置,理论上能够使摆动角的误差为零。动态仿真实验验证了所提出的对角步态规划能够使四足机器人实现稳定的对角小跑的有效性。     

一种新的双足机器人模型设计与相关研究

针对双足机器人最简模型在行走过程中出现摆动腿足部擦地的问题,提出了一种通过摆动腿膝关节弯曲达到摆动腿缩短的新模型。当摆动腿开始摆动时,摆动腿膝关节弯曲锁定,摆动腿缩短;当摆动腿摆动到最大位置时,膝关节解锁,摆动腿伸直再锁定,此后摆动腿回摆,系统变为直腿模型。采用脚后跟冲击控制,在摆动腿落地前,拖后的支撑腿与地面接触处施加一指向髋关节的瞬时冲击力,冲击力可以减小摆动腿着地时能量的损耗,同时驱动被动机器人向前行走。设计了迭代学习控制算法,找到极限环与不动点,实现不同给定期望步长跟踪的冲击力的计算。仿真结果表明,迭代学习控制可以有效的实现不同期望步长的跟踪,可以很快的找到机器人系统的不动点,通过收敛的相平面,得到稳定的极限环,保证了机器人行走过程稳定。     

基于梯度下降和二分法的移动机器人轨迹规划方法

轨迹规划是移动焊接机器人轨迹控制的基础,是该系统中重要的组成部分。为了提高多关节移动焊接机器人轨迹规划的效率和精确性,同时考虑到多关节焊接机器人的运动特性提出了一种梯度下降法和二分法结合的轨迹规划方法。移动焊接机器人由机械杆和机器人移动平台组成,由于移动平台提供移动性使得移动焊接机器人相对固定的机械臂有更大的工作空间。近年来,此类系统的研究已在经学术界和工业界迅猛发展。论文首先建立移动焊接机器人的运动学模型,并且阐述梯度下降法和二分法结合算法的设计步骤。然后,采用典型的正弦波形作为焊缝轨迹,通过仿真验证该方法的应用前景和可行性。     

液压四足机器人的实时分散解耦控制

针对液压驱动四足机器人单腿协调性难以保证的问题,开发了一种实时分散解耦控制系统：基于PC-Based控制系统架构,在RTX环境下模块化了实时控制子任务,并对多任务的处理进行了实时调度,搭建出了机器人的实时分散控制系统框架;针对单腿系统设计了基于PID神经元网络的广义解耦控制算法,并将其嵌入到整体程序框架中,实现了多腿联动的分散解耦控制。物理样机实验表明开发的控制系统能够满足分散解耦控制算法的实时性要求,提高了四足机器人运动的协调性,进而保证其连续稳定地行走,具有一定的独创性与实用价值。     

液压驱动型四足机器人电液伺服控制系统仿真建模与实验分析

复杂的作业环境和艰巨的作业任务使液压驱动型四足机器人对其伺服系统的精度、速度和力量均比一般机器人在普通情况下有更高的要求。为掌握液压驱动型四足机器人在多种路况下行走时各液压缸的受力情况以及液压系统内流量、压力的变化情况,需要对其虚拟样机进行机械动力系统和液压伺服系统的联合仿真,定性分析电液伺服系统位置、速度等被控对象的特性,并分析PID控制器在四足机器人伺服控制方面的特性与不足。针对传统控制算法在四足机器人控制存在的短板问题,设计了一种非对称前馈补偿模糊自适应PID算法,并利用物理样机进行了实际验证。实验结果为四足机器人电液伺服控制系统硬件、软件和控制算法的设计与优化指明了方向,还为研究四足机器人平稳步态控制策略提供了决策依据和数据支持。     

下肢负重外骨骼机器人的初步设计

研究设计了一种能够增强人体负重的下肢外骨骼机器人,该负重外骨骼机器人具有8个自由度,可实现髋关节的外展与内收、屈/伸运动;膝关节的屈/伸运动以及踝关节的弯曲运动。根据人体步态分析研究出各个关节的运动角度范围,结合目标负重进行结构优化设计。对机器人的结构进行简化,建立了外骨骼机器人的连杆模型,根据其几何关系,采用D-H准则对外骨骼机器人进行了数学建模。以计算机、六轴运动控制卡和STM32为核心构建了控制系统,结合ZMP(Zero Moment Point)零力矩点稳定性判据及三次样条插值进行了步态规划,并将此步态规划应用于样机上。样机实验结果表明,此结构能够满足不同体型的人进行穿戴,并能够根据规划的步态轻松行走,验证了其结构和控制系统的合理性。     

双足机器人下楼梯动作的设计与生成

上下楼梯是人们典型,常见的动作,研究其动作生成算法是实现稳定步态的重要保证;以双足机器人为研究对象,以下楼梯动作为例,基于重复变换的上体重心移动法提出双足机器人下楼梯动作的设计方法;通过仿真生成了3种典型模式的下楼梯动作过程,评价了下楼梯过程中各关节的角度变化,力矩变化和稳定性,讨论了楼梯参数变化对机器人各关节负担的影响;仿真结果表明,通过改变下楼梯的方式,可以减轻下楼梯对腿部损伤关节的负担,提高安全性,实现稳定的下楼梯动作;为福祉,康复医疗教育提供依据。     

光子晶体传输特性的时域精细积分法分析

将精细积分法应用于时域有限差分法中,提出了一种求解光子晶体传输特性的时域精细积分法,并对其计算精度及稳定性进行了分析.从一阶麦克斯韦方程出发,在空间上采用Yee元胞进行差分离散,结合吸收边界条件及激励源表达式将方程整理为标准的一阶常微分方程组形式.通过时间步长的精细划分和指数矩阵的加法定理,在时间上利用精细积分法对齐次微分方程进行积分求解,并结合激励向量的特解得到空间离散的场分量,最终通过傅里叶变换求得方程的解.利用时域精细积分法对光子晶体进行了实例计算,并将其结果分别与时域有限差分法和四阶龙格库塔法在精度、稳定性等方面进行了比较,结果表明时域精细积分法具有更高的计算精度,并且克服了时域有限差分法以及四阶龙格库塔法在计算稳定性上对时间步长的限制.提出的方法具有精确、稳定的特点,为光子晶体传输特性的研究提供了一种新的有效的分析方法.     

上行与下行人腿膝部受力问题分析

腿部运动是人体活动的最基本方式,人腿的上行与下行是人体活动的核心组成要件。本文理清了腿关节受力与基本腿部运动的关联因素,围绕人腿上下行运动建立简化模型,推导出实际过程腿部的运动状态与受力间的稳定态方程,从而以明确的数据说明腿部上下行活动中的受力量化问题。同时,结合膝部损伤问题,文中提出了缓解腿部损伤的方法;通过本文所建构的下肢运动模型,有助于推动人们对下肢健康运动方式的理解和认识,并引发同类问题的迁移性思考,所讨论模型可在步行式机器人的入门认识方面引发有价值的讨论。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.