2018年5期 电子期刊

研究了不同Mn/Pb量比的Mn掺杂CsPbCl₃（Mn：CsPbCl₃）钙钛矿量子点的发光性质。Mn/Pb的量比增加引起的Mn²⁺发光峰的红移,被认为是来源于高浓度Mn²⁺掺杂下的Mn²⁺-Mn²⁺对。进一步研究了Mn：CsPbCl₃量子点的发光效率与Mn/Pb的量比之间的关系,发现随着量比达到5：1时,其发光效率明显下降。这种发光效率下降是由于Mn掺杂浓度引起的发光猝灭。Mn：CsPbCl₃量子点的变温发光光谱证实,随着温度的升高,Mn离子发光峰蓝移,线宽加宽,但其发光强度明显增加。     

Ge，Al掺杂锰硅化合物Mn4Si7的第一性原理计算

基于密度泛函理论（DFT）的第一性原理计算方法,对本征Mn4Si7以及Ge,Al单掺杂和共掺杂Mn4Si7的晶体结构,能带结构,态密度以及光学性质进行了计算和分析.计算结果表明：本征态Mn4Si7的禁带宽度为0.810 eV,为直接带隙半导体材料,掺杂后晶体结构稍微变化,禁带宽度减小,且共掺杂时禁带宽度最小,电导率最好.Al以及Ge,Al共同掺杂时会产生杂质能级.掺杂后光子能量向低能级方向移动,光电导率,光吸收,反射系数都有所增大,说明掺杂改善了Mn4Si7的光学性质,从而可以提高光伏发电效率.     

基于光纤光栅谐振腔的掺镱全光纤激光器设计(英文)

采用数值分析方法分析了光纤长度、后腔镜反射率等因素对激光器输出阈值泵浦功率、输出功率的影响,为全光纤激光器的优化设计提供了理论基础.在设计过程中采用光纤光栅作为光纤激光器的反馈与选频腔镜,通过锥度光纤实现了泵浦模块与掺镱双包层光纤之间的低损耗连接以及高效率的泵浦激光功率传输,成功研制了具备稳定窄化线宽激光输出的掺镱全光纤激光器.实验得到了波长峰值在1 082 .50 nm,谱线宽度0 .113 nm,最大输出功率8 .5 W,泵浦阈值功率0 .8 W,斜率效率为70 .8 %的稳定激光输出.     

硅BC8量子点太阳能电池中的多重激子效应

多重激子效应是指在纳米半导体晶体中,量子点吸收一个高能光子而产生多个电子-空穴对的过程,该效应可以提高单结太阳电池能量转换效率。利用碰撞电离机制和费米统计模型计算了工作温度300 K的单结硅BC8量子点太阳能电池在AM1.5G太阳光谱下的能量转换效率。对于波长在280~580 nm的入射光,多重激子效应可以大幅增强硅BC8量子点直径d>5.0 nm的量子点太阳电池的能量转换效率。硅纳米量子点的直径d=6.3~6.4 nm时,最大能量转换效率为51.6%。     

Manufacturing of Volumetric Glass–Based Composites with Single‐ and Double‐QD Doping

Quantum dot (QD)‐based light‐emitting materials are gaining increased attention because of their easily tunable optical properties desired for various applications in biology, optoelectronics, and photonics. However, few methods can be used to manufacture volumetric materials doped with more than one type of QD other than QD‐polymer hybrids, and they often require complicated preparation processes and are prone to luminescence quenching by QD aggregation and separation from the matrix. Here, simultaneous doping of a volumetric glass‐based nanocomposite with two types of QDs is demonstrated for the first time in a single‐step process using the nanoparticle direct doping method. Glass rods doped with CdTe, CdSe/ZnS, or co‐doped with both QDs, are obtained. Photoluminescence and lifetime experiments confirm temperature‐dependent double emission with maxima at 596 and 720 nm with mean lifetimes up to 16 ns, as well as radiative energy transfer from the short wavelength–emitting QDs to the long wavelength–emitting QDs. This approach may enable the simple and cost‐efficient manufacturing of bulk materials that produce multicolor luminescence with cascade excitation pumping. Applications that could benefit from this include broadband optical fiber amplifiers, backlight systems in LCD screens, high‐power LEDs, or down‐converting solar concentrators used to increase the efficiency of solar panels.     

Enhanced field emission from Si doped nanocrystalline AlN thin films

Si doped and undoped nanocrystalline aluminum nitride thin films were deposited on various substrates by direct current sputtering technique. X-ray diffraction analysis confirmed the formation of phase pure hexagonal aluminum nitride with a single peak corresponding to (1 0 0) reflection of AlN with lattice constants, a = 0.3114 nm and c = 0.4986 nm. Energy dispersive analysis of X-rays confirmed the presence of Si in the doped AlN films. Atomic force microscopic studies showed that the average particle size of the film prepared at substrate temperature 200 °C was 9.5 nm, but when 5 at.% Si was incorporated the average particle size increased to ∼21 nm. Field emission study indicated that, with increasing Si doping concentration, the emission characteristics have been improved. The turn-on field (E_to) was 15.0 (±0.7) V/μm, 8.0 (±0.4) V/μm and 7.8 (±0.5) V/μm for undoped, 3 at.% and 5 at.% Si doped AlN films respectively and the maximum current density of 0.27 μA/cm² has been observed for 5 at.% Si doped nanocrystalline AlN film. It was also found that the dielectric properties were highly dependent on Si doping.     

半导体红外量子点发展现状与前景

半导体量子点具有独特的光学与电学性质,特别是红外量子点良好的光稳定性和生物相容性等优点使其在光电器件、生物医学等领域受到广泛关注。综述了吸收或发射光谱位于红外波段的量子点在激光、能源、光电探测以及生物医学等方面的应用现状与前景,归纳了适用于红外量子点材料的制备方法,并对比了不同方法在应用中的优势。半导体红外量子点材料选择丰富、应用形式多样:InAs量子点被动锁模激光器在1.3 μm波长处产生7.3 GHz的近衍射极限脉冲输出;InAs/GaAs量子点双波长激光器可泵浦产生0.6 nW的THz波;PbS量子点掺杂光纤放大器可在1.53 μm中心波长处实现10.5 dB光增益,带宽160 nm;CdSeTe量子点敏化太阳能电池、异质结Si基量子点太阳能电池的总转换效率可达8%和14.8%;胶质HgTe量子点制成的量子点红外探测器(QDIP)可实现3 μm~5 μm中波红外探测,Ge/Si量子点可实现3 μm~7 μm红外探测;CdTe/ZnSe核壳量子点可用于检测DNA序列的损伤与突变。半导体红外量子点上述应用形式的发展,将进一步促进红外光电系统向高效、快速、大规模集成的方向演进,也将极大地促进临床医学中活体成像检测的应用推广。     

Optical properties of Si-doped InAs/InP quantum dots

InAs quantum dots (QDs) were grown on InP substrates by low pressure-metalorganic chemical vapor deposition. Disilane (Si₂H₆) was used as an n-type dopant. The positions of Si doping were varied: buffer layer, capping layer, modulation doping, and QD itself. Surface treatment of InP by Si₂H₆ was also performed to see the effect of Si on InAs QD. Photoluminescence (PL) and atomic force microscopy (AFM) were used to characterize optical and structural properties of QDs, respectively. It was found that the PL peak positions varied from 0.73 to 0.88 eV with the position of Si doping. PL peak blue shift in modulation doped sample was explained in terms of state filling effect. It was found that Si doping at QD itself was the most effective way to obtain the strongest integrated PL intensity without degrading the QD size distribution.     

Efficient pumping of Rb vapor by high-power volume Bragg diode laser

A 2W cw laser diode (LD) with an external cavity produced by a reflecting volume Bragg grating (VBG) demonstrated a spectral width of 7GHz (full width at half-maximum) at 780nm. The device output power exceeded 90% of the output power of the free-running LD. The emission wavelength was tuned over a 300pm range by thermal control of the VBG. Rb vapor was shown to absorb more than 95% of the laser radiation.     

980 nm 垂直腔面发射激光器低欧姆接触电阻制备

研究了980 nm的垂直腔面发射激光器(VCSEL)欧姆接触技术.降低VCSEL的欧姆接触电阻,可有效地提高VCSEL的输出功率和延长其可靠性.P面采用高掺杂的P-GaAs/Ti/Pt/Au系统,N面采用N-GaAs/Ge/Au/Ni/Au系统,通过优化合金温度,得到了最佳优化合金温度为440 ℃,最低欧姆接触电阻值为0.04 Ω,同时对比了440 ℃和450 ℃器件的输出功率和转换效率之间的对比关系.测试结果表明,440 ℃器件的欧姆接触电阻0.04 Ω,峰值波长980.1 nm,光谱的半高宽0.8 nm,平行发散角θ_‖ 15.2°,垂直发散角θ_⊥ 13.5°,输出功率1.4 W,转换效率最大值为14.4%,而450℃的器件欧姆接触电阻为0.049 Ω,输出功率为1.3 W,转换效率为12.8%.通过优化合金温度能有效地降低980 nm的VCSEL欧姆接触电阻.     

宽带可调谐掺Yb3+双包层光纤激光器的研究

利用闪耀光栅构成可调谐Littrow外腔,对掺Yb³⁺双包层光纤激光器的波长调谐输出进行了实验研究.激光调谐输出波长范围70nm.针对光纤内的双折射效应对激光的输出功率的影响,实验中使用了在线光纤偏振控制器,从而有效地减小了调谐曲线的起伏及其与荧光谱的差别,并得到了窄线宽、线偏振、宽带调谐的激光输出.     

国产30/600μm掺镱光纤实现4.1kW激光输出

采用化学气相沉积结合气相/液相复合掺杂方式制备30/600 μm掺镱双包层光纤,石英纤芯中的掺杂组分为Yb₂O₃, Al₂O₃,P₂O₅。基于976 nm发光二极管反向抽运方式,构建全光纤化的主控振荡器功率放大器结构对增益光纤进行测试。实验中,种子源功率为189 W,当泵浦总功率为4747 W时,激光输出功率为4120 W,放大级光光效率为85%,3 dB带宽为1.6 nm。激光器连续工作1 h,激光功率稳定在4100 W,未发生明显的功率衰退现象。     

基于梯度掺杂策略的碳纳米管场效应管性能优化

双极性传输特性是制约碳纳米管场效应管(carbon nanotube field effect transistors,CNFETs)性能提高的一个重要因素.为降低器件的双极性传输特性并获得较大的开关电流比,提出了一种漏端梯度掺杂策略,该策略不仅适合于类MOS碳纳米管场效应管(C-CNFETs),同时也适合于隧穿碳纳米管场效应管(T-CNFETs).基于非平衡格林函数的数值研究结果表明,该策略不仅能有效降低器件的双极传输特性,而且能将器件开关电流比提高数个数量级.进一步研究发现,该掺杂策略在这两类碳纳米管 关键词： 梯度掺杂 带间隧穿 双极性传输 碳纳米管场效应管     

CdS_xSe_(1-x)/ZnS(核/壳)量子点的光谱截面及其掺杂光纤的传光特性

测量了不同组份比例x的CdS_xSe_(1-x)/ZnS(核/壳)量子点的吸收谱和发射谱,确定了量子点的吸收系数、吸收截面和发射截面.量子点吸收截面随粒径的增大而增大、随x的增大而减小.采用紫外固化胶,制备了掺杂浓度为0.1~5mg/mL的CdS_(0.4)Se_(0.6)/ZnS量子点光纤,测量了不同掺杂浓度量子点光纤中473nm泵浦功率的吸收衰减速率.吸收衰减速率和吸收截面弱关联于掺杂浓度.测量了光致荧光光谱强度随光纤长度和量子点浓度的变化.量子点光纤的光致荧光峰值强度随掺杂浓度和光纤长度变化而变化,且存在一个与最大峰值强度对应的饱和掺杂浓度和光纤长度.本文的实验结果有助于进一步构建新型的CdS_xSe_(1-x)/ZnS量子点增益型光电子器件.     

红光量子点掺杂PVK体系的发光特性研究

无热处理制备了红光CdSe/ZnS量子点掺杂PVK的ITO/PVK:QDs/Alq3/Al结构电致发光器件.测试器件的发光光谱和电学特性等,研究了掺杂浓度(质量分数)对体系发光特性的影响,将非掺杂与掺杂体系做了比较,提出了优化掺杂体系的一些可行方案.量子点掺杂浓度较低时,主要为Alq3的发光;掺杂浓度为20%时,Alq3的发光得到抑制,红光发射最佳;继续增大掺杂浓度,QDs发光峰发生微弱红移,器件性能变差.与非掺杂体系相比,掺杂浓度合适的PVK:QDs体系大大提高了器件的稳定性.     

High-average-power light source below 200 nm from a KBe(2)BO(3)F(2) prism-coupled device

Using a 2.3 mm thick KBe(2)BO(3)F(2) crystal optically contacted with CaF(2) in a prism-coupled device, we have obtained an average output power of as much as 360 mW at 200 nm. Long-term stability was verified above a 150 mW level at 200 nm. An output power of 50 mW was also obtained with a narrow spectral width of 0.007 pm at 193.5 nm.     

TBPe与MEH-PPV共掺杂的有机电致发光器件的优化研究

采用有机小分子TBPe（2,5,8,11-tetratertbutylperylene）以不同比例掺入MEH-PPV（poly ）作为发光层,研究了TBPe不同掺杂比例对器件性能的影响,进而对发光强度进行优化。对于所制备的ITO/PEDOT：PSS/MEH-PPV/TBPe/Al有机电致发光器件,TBPe的最优蒸镀厚度为0.5 nm,其发光强度相对于标准器件提高了325%。ITO/PEDOT：PSS/MEH-PPV：TBPe/TBPe/Liq/Al有机电致发光器件的最优掺杂比例为MEH-PPV：TBPe=100：30（质量比）,其发光亮度相比于未掺杂器件提高了44%。在上述器件的基础上增加Alq₃层提高电子注入,分别制作了Liq和LiF作为修饰层的ITO/PEDOT：PSS/MEH-PPV：TBPe/TBPe/Alq₃/Liq/Al和ITO/PEDOT：PSS/MEH-PPV：TBPe/TBPe/Alq₃/LiF/Al多层器件,发光亮度分别达到4 162 cd/m²和4 701 cd/m²。所有器件的电致发光波长均为580 nm,为MEH-PPV的发光,TBPe的掺杂对MEH-PPV的发光起到了增强作用。     

Continuous wave, 30 W laser-diode bar with 10 GHz linewidth for Rb laser pumping

A laser-diode bar incorporated into an external cavity with a volume Bragg mirror produced 30 W of cw output power within a 20 pm (10 GHz) spectral linewidth (FWHM) centered at 780 nm. The device output power exceeded 90% of that for the free-running laser-diode bar. The emission wavelength was tuned over a 400 pm range without broadening laser spectrum width. Absorption of 90% of the laser radiation by a 25 mm vapor cell containing Rb that has been pressure broadened with 300 torr of ethane was demonstrated.     

EFFECT OF DOPANT ON THE UNIFORMITY OF InAs SELF-ORGANIZED QUANTUM DOTS

Low-temperature photoluminescence studies have been performed on Si-doped and Bedoped self-organized InAs/GaAs quantum dot(QD) samples to investigate the effect of doping. When Si or Be is doped into the sample,a remarkable decrease in line-width is observed. We relate this phenomenon to a model that takes the Si or Be atoms as the nucleation centers for the formation of QDs. When Si or Be is doped, more smalll uniform quantum dots are formed. The result will be of significance for the application of self-organized InAs quantum dots in semiconductor devices.     

超小晶粒锡掺杂CsPbBr3蓝光量子点的合成及其光学性能研究

近年来,铅卤钙钛矿CsPbX₃ (X=Cl,Br或I)因其具有荧光波段可调、荧光量子产率高(Photoluminescence quantum yield,PLQY)以及荧光半峰宽窄等优点而被广泛应用于光电器件领域.然而,与PLQY接近于100%的绿光和红光相比,蓝光卤素钙钛矿的PLQY仍比较低.在此,采用过饱和结晶的方法在室温下合成了粒径低于4 nm的超小晶粒锡(Sn)掺杂CsPbBr₃量子点,并对其结构特性和光学特性进行了研究.结果表明:随着SnBr₂添加量的增大,量子点晶粒的粒径略微减小,荧光发射峰发生蓝移,粒径由3.33 nm (SnBr₂为0.03 mmol)减小到2.23 nm(SnBr₂为0.06 mmol时),对应的荧光发射峰由490 nm蓝移至472 nm.当SnBr₂添加量为0.05 mmol时合成的超小晶粒锡掺杂CsPbBr₃量子点显示出最优的光学性能,其粒径约为2.91 nm,对应的XRD各晶面衍射峰强度最强,...