Optical properties of InAs quantum dots in a Si matrix

We report on the optical properties of nanoscale InAs quantum dots in a Si matrix. At a growth temperature of 400°C, the deposition of 7 ML InAs leads to the formation of coherent islands with dimensions in the 2–4 nm range with a high sheet density. Samples with such InAs quantum dots show a luminescence band in the 1.3 μm region for temperatures up to 170 K. The PL shows a pronounced blue shift with increasing excitation density and decays with a time constant of 440 ns. The optical properties suggest an indirect type II transition for the InAs/Si quantum dots. The electronic structure of InAs/Si QDs is discussed in view of available band offset information.     

Intraband carrier relaxation in quantum dots mediated by surface plasmon-phonon excitations

A new mechanism of the intraband carrier relaxation in quantum dots embedded into a heterostructure at a relatively large distance from its doped elements is proposed. The relaxation process is related to the coupling between the electronic subsystem of a quantum dot and surface plasmon-phonon excitations of the doped components of the heterostructure via the electric potential produced by these excitations. It is found that, in layered heterostructures, the dispersion relations of the surface plasmon-LO-phonon modes display critical points giving rise to pronounced singularities in the relaxation rate spectra. The estimates of the relaxation rates for InAs quantum dots embedded into a GaAs heterostructure have shown high efficiency of the proposed mechanism even when the quantum dots are located at a distance of up to 100 nm from the doped regions of the heterostructure. When this distance lies in the range of a few tens of nanometers, this mechanism appears to be predominant. Possible manifestations of the relaxation mechanism under consideration in the photoluminescence spectra of quantum dots are discussed.     

半导体红外量子点发展现状与前景

半导体量子点具有独特的光学与电学性质,特别是红外量子点良好的光稳定性和生物相容性等优点使其在光电器件、生物医学等领域受到广泛关注。综述了吸收或发射光谱位于红外波段的量子点在激光、能源、光电探测以及生物医学等方面的应用现状与前景,归纳了适用于红外量子点材料的制备方法,并对比了不同方法在应用中的优势。半导体红外量子点材料选择丰富、应用形式多样:InAs量子点被动锁模激光器在1.3 μm波长处产生7.3 GHz的近衍射极限脉冲输出;InAs/GaAs量子点双波长激光器可泵浦产生0.6 nW的THz波;PbS量子点掺杂光纤放大器可在1.53 μm中心波长处实现10.5 dB光增益,带宽160 nm;CdSeTe量子点敏化太阳能电池、异质结Si基量子点太阳能电池的总转换效率可达8%和14.8%;胶质HgTe量子点制成的量子点红外探测器(QDIP)可实现3 μm~5 μm中波红外探测,Ge/Si量子点可实现3 μm~7 μm红外探测;CdTe/ZnSe核壳量子点可用于检测DNA序列的损伤与突变。半导体红外量子点上述应用形式的发展,将进一步促进红外光电系统向高效、快速、大规模集成的方向演进,也将极大地促进临床医学中活体成像检测的应用推广。     

Heterostructures with InGaAs/GaAs quantum dots doped with transition elements: II. Study of the circularly polarized luminescence

Optical and transport properties of the heterostructure with the InAs/GaAs quantum dots doped with manganese or chromium atoms in the course of growth using metal-organic vapor phase epitaxy (MOVPE) are analyzed. Circularly polarized luminescence was obtained due to doping of quantum dots with the Mn or Cr atoms. The sign of the degree of circular polarization was found to depend on the dopant. The effect is interpreted using specific features of the radiative recombination in quantum dots in the presence of resident electrons and holes.     

Selective growth of InAs islands on patterned GaAs (100) substrate

By a combination of prepatterned substrate and self-organized growth, InAs islands are grown on the stripe-patterned GaAs (100) substrate by solid-source molecular beam epitaxy. It is found that the InAs quantum dots can be formed either on the ridge or on the sidewall of the stripes near the bottom, depending on the structure of the stripes on the patterned substrate or molecular beam epitaxy growth conditions. When a In_xGa_1−xAs strained layer is grown first before InAs deposition, almost all the InAs quantum dots are deposited at the edges of the top ridge. And when the InAs deposition amount is larger, a quasi-quantum wire structure is found. The optical properties of the InAs dots on the patterned substrate are also investigated by photoluminescence.     

The microstructure of vertically coupled quantum dots ensembles by EXAFS spectroscopy

The microstructure of samples containing Ge/Si, GaN/AlN, and InAs/AlAs (Ge, GaN, and InAs quantum dots (QDs) in the Si, AlN, and AlAs matrices, respectively) multilayer heterostructures has been investigated by EXAFS spectroscopy. The effect of the effective thicknesses of Si (or AlN) barrier layers, number of Ge (or GaN) layers in a sandwich, and annealing temperature on the size and shape of Ge (or GaN) clusters, interfacial diffusion in these systems, and formation of three-dimensional ordered ensembles of QDs has been established.     

Anomalous temperature dependence of photoluminescence peak energy in InAs/InAlAs/InP quantum dots

We have observed an unusual temperature sensitivity of the photoluminescence (PL) peak energy for InAs quantum dots grown on InAs quantum wires (QDOWs) on InP substrate. The net temperature shift of PL wavelength of the QDOWs ranges from 0.8 to −4 Å/°C depending upon the Si doping concentration in the samples. This unusual temperature behavior can be mainly ascribed to the stress amplification in the QDOWs when the thermal strain is transferred from the surrounding InAs wires. This offers an opportunity for realizing quantum dot laser devices with a temperature insensitive lasing wavelength.     

Optical properties of Si-doped InAs/InP quantum dots

InAs quantum dots (QDs) were grown on InP substrates by low pressure-metalorganic chemical vapor deposition. Disilane (Si₂H₆) was used as an n-type dopant. The positions of Si doping were varied: buffer layer, capping layer, modulation doping, and QD itself. Surface treatment of InP by Si₂H₆ was also performed to see the effect of Si on InAs QD. Photoluminescence (PL) and atomic force microscopy (AFM) were used to characterize optical and structural properties of QDs, respectively. It was found that the PL peak positions varied from 0.73 to 0.88 eV with the position of Si doping. PL peak blue shift in modulation doped sample was explained in terms of state filling effect. It was found that Si doping at QD itself was the most effective way to obtain the strongest integrated PL intensity without degrading the QD size distribution.     

GaAs层引入InAs/Inp量子点有序生长机制的研究

本文对张应变GaAs层引入使InAs/Inp量子点有序化排列的机制进行了分析.为提高InAs/Inp自组装量子点特性提供了理论依据.     

红光InAlAs量子点的结构和光学性质

利用ＭＢＥ方法在（００１）衬底上成功地生长密度大、尺寸小、发红光的ＩｎＡｌＡｓ／ＡｌＧａＡｓ量子点结构。通过原子力显微镜观察表明,ＩｎＡｌＡｓ量子的密度和大小都随覆盖厚度的增加而增大;发现Ａｌ原子的表面迁移率决定ＩｎＡｌＡｓ量子点的形貌,光荧光谱证实了量子点的发光峰值在红光范围,并结合形貌的统计得到了量子点的发光峰展宽主要昌受量子点的横向尺寸影响。     

Growth of InGaAs-capped InAs quantum dots characterized by Atomic Force Microscope and Scanning Electron Microscope

Atomic force microscopy (AFM) is typically used to measure the quantum dot shape and density formed by lattice mismatched epitaxial growth such as InAs on GaAs. However, AFM images are distorted when two dots are situated in juxtaposition with a distance less than the AFM tip width. Scanning electron Microscope (SEM) is much better in distinguishing the dot density but not the dot height. Through these measurements of the growth of In_xGa_1-xAs cap layer on InAs quantum dots, it was observed that the InGaAs layer neither covered the InAs quantum dots and wetting layer uniformly nor 100% phase separates into InAs and GaAs grown on InAs quantum dots and wetting layer, respectively.     

Effect of B atoms on the properties of InAs quantum dots in the GaAs matrix

The effect of B dopants on the properties of InAs quantum dots is studied experimentally. It is shown that the incorporation of B atoms decreases the integral amount of InAs that is needed to form islands according to the Stransky-Krastanov mechanism and leads to an increase in the density of dots. At the same time, it is discovered that the sensitivity of InAs quantum dots to annealing increases, which leads to the degradation of the optical properties of these quantum dots during growth of covering layers.     

Interface phonons in semiconductor nanostructures with quantum dots

The vibrational spectra of structures with InAs quantum dots in an AlGaAs matrix and AlAs quantum dots in an InAs matrix are investigated experimentally and theoretically. The Raman spectra exhibit features that correspond to transverse-optical (TO), longitudinal-optical (LO), and interface phonons. The frequencies of interface phonons in InAs and AlAs quantum dots and in an AlGaAs matrix with various concentrations of aluminum are calculated with the use of experimental values of transverse-and longitudinal-optical phonons in the approximation of a dielectric continuum. It is shown that the model of a dielectric continuum adequately describes the behavior of interface phonons in structures with quantum dots under the assumption that the quantum dots are spheroidal.     

Optical investigation of InAs/InP(1 0 0) quantum dots grown by gas source molecular beam epitaxy

We report on the optical characteristics of InAs quantum dots based on the InP(1 0 0) substrate grown by gas source molecular beam epitaxy without assisting any other methods. The photoluminescence was carefully investigated by adjusting the thickness of InAs layers and the growth temperature. A wide range of emitting peaks is obtained with the increase in the thickness of InAs layers. In addition, we find that the morphology and shape of quantum dots also greatly depend on InAs layers. The images of atomic force microscopy show that the quantum dots like forming into quantum dashes elongated along the [0 1 ?1] direction when the thickness of InAs layers increased. A critical thickness of formation quantum dots or quantum dash is obtained. At the same time, we observe that the growth temperature also has a great impact on the emission wavelength peaks. High qualities of InAs/InP(1 0 0) quantum dots providing their emission wavelength in 1.55 μm are obtained, and good performances of quantum dots lasers are fabricated.     

PHOTOLUMINESCENCE STUDY OF InAs/GaAs SELF-ORGANIZED QUANTUM DOTS WITH BIMODAL SIZE DISTRIBUTION

We have investigated the temperature dependence of the photoluminescence (PL) spectrum of self-organized InAs/GaAs quantum dots. A distinctive double-peak feature of the PL spectra from quantum dots has been observed, and a bimodal distribution of dot sizes has also been confirmed by scanning tunneling microscopy image for uncapped sample. The power-dependent PL study demonstrates that the distinctive PL emission peaks are associated with the ground-state emission of islands in different size branches. The temperature-dependent PL study shows that the PL quenching temperature for different dot families is different. Due to lacking of the couple between quantum dots, an unusual temperature dependence of the linewidth and peak energy of the dot ensemble photoluminescence has not been observed. In addition, we have tuned the emission wavelength of InAs QDs to 1.3 μm at room temperature.     

Studying the mechanism of ordered growth of InAs quantum dots on GaAs/InP

We study the mechanism of ordered growth of InAs quantum dots (islands) on a GaAs/InP substrate in theory and point out that the tensile strain can be used to control InAs/InP self-assembled quantum dots arrangement. Photoluminescence spectrum, and atomic force microscopy images have been investigated. In the experiment, ordered InAs islands have been obtained and the maximum density of quantum dots is 1.6×10¹⁰ cm⁻² at 4 monolayers InAs layer.     

Theoretical study of quantum confined Stark shift in InAs／GaAs quantum dots

The quantum confined Stark effect (QCSE) of the self-assembled InAs/GaAs quantum dots has been investigated theoretically. The ground-state transition energies for quantum dots in the shape of a cube, pyramid or “truncated pyramid” are calculated and analysed. We use a method based on the Green function technique for calculating thestrain in quantum dots and an efficient plane-wave envelope-function technique to determine the ground-state electronic structure of them with different shapes. The symmetry of quantum dots is broken by the effect of strain. So the properties of carriers show different behaviours from the traditional quantum device. Based on these results, we also calculate permanent built-in dipole moments and compare them with recent experimental data. Our results demonstrate that the measured Stark effect in self-assembled InAs/GaAs quantum dot structures can be explained by including linear grading.     

Electron and hole effective masses in self-assembled quantum dots

Electron and hole effective masses in self-assembled InAs/GaAs quantum dots are determined by fitting the energy levels calculated by a single-band model to those obtained by a more sophisticated tight-binding method. For the dots of various shapes and dimensions, the electron effective-mass is found to be much larger than that in the bulk and become anisotropic in the dots of large aspect ratio while the hole effective-mass becomes almost isotropic in the dots of small aspect ratio. For flat InAs/GaAs quantum dots, the most appropriate value for the electron and hole effective-mass is believed to be the electron effective-mass in bulk GaAs and the vertical heavy-hole effective-mass in bulk InAs, respectively.     

MBE自组织生长多层竖直自对准InAs量子点结构的研究

利用MBE方法在(001)GaAs衬底上生长了多层竖直自对准InAs量子点结构。透射电子显微镜的观察表明,多层量子点成一系列柱状分布。同单层量子点相比,多层量子点的光荧光谱线发生红移。这表明由于量子点中载流子波函数的扩展和交迭,柱中量子点之间有耦合现象发生。光荧光谱线半高宽随温度的反常变化说明载流子还会在邻近柱中隧穿.     

Wetting layers effect on InAs/GaAs quantum dots

FEM combining with the K·P theory is adopted to systematically investigate the effect of wetting layers on the strain-stress profiles and electronic structures of self-organized InAs quantum dot. Four different kinds of quantum dots are introduced at the same height and aspect ratio. We found that 0.5 nm wetting layer is an appropriate thickness for InAs/GaAs quantum dots. Strain shift down about 3%∼4.5% for the cases with WL (0.5 nm) and without WL in four shapes of quantum dots. For band edge energy, wetting layers expand the potential energy gap width. When WL thickness is more than 0.8 nm, the band edge energy profiles cannot vary regularly. The electron energy is affected while for heavy hole this impact on the energy is limited. Wetting layers for the influence of the electronic structure is obviously than the heavy hole. Consequently, the electron probability density function spread from buffer to wetting layer while the center of hole's function moves from QDs internal to wetting layer when introduce WLs. When WLs thickness is larger than 0.8 nm, the electronic structures of quantum dots have changed obviously. This will affect the instrument's performance which relies on the quantum dots' optical properties.