Modeling and analysis of laminate composite plates with embedded active-passive piezoelectric networks

The objective of this work is to present the finite element modeling of laminate composite plates with embedded piezoelectric patches or layers that are then connected to active-passive resonant shunt circuits, composed of resistance, inductance and voltage source. Applications to passive vibration control and active control authority enhancement are also presented and discussed. The finite element model is based on an equivalent single layer theory combined with a third-order shear deformation theory. A stress-voltage electromechanical model is considered for the piezoelectric materials fully coupled to the electrical circuits. To this end, the electrical circuit equations are also included in the variational formulation. Hence, conservation of charge and full electromechanical coupling are guaranteed. The formulation results in a coupled finite element model with mechanical (displacements) and electrical (charges at electrodes) degrees of freedom. For a Graphite-Epoxy (Carbon-Fibre Reinforced) laminate composite plate, a parametric analysis is performed to evaluate optimal locations along the plate plane (xy) and thickness (z) that maximize the effective modal electromechanical coupling coefficient. Then, the passive vibration control performance is evaluated for a network of optimally located shunted piezoelectric patches embedded in the plate, through the design of resistance and inductance values of each circuit, to reduce the vibration amplitude of the first four vibration modes. A vibration amplitude reduction of at least 10 dB for all vibration modes was observed. Then, an analysis of the control authority enhancement due to the resonant shunt circuit, when the piezoelectric patches are used as actuators, is performed. It is shown that the control authority can indeed be improved near a selected resonance even with multiple pairs of piezoelectric patches and active-passive circuits acting simultaneously.     

复合圆环弯曲振动四极子模态分析

针对压电圆环弯曲振动机电转换性能较差的问题,提出了一种复合圆环弯曲振动换能器,它由一个径向极化的压电陶瓷内圆环和一个金属外圆环复合而成。基于能量原理推导得到了复合圆环弯曲振动的谐振频率和有效机电耦合系数,探讨了弯曲振动四极子模态特性与其结构尺寸间的关系。当压电圆环尺寸不变时,随外侧金属圆环壁厚增加,复合圆环弯曲振动四极子模态谐振频率上升,有效机电耦合系数迅速上升到极大值后缓慢下降。最后,设计制作了圆环换能器并对其谐振频率和有效机电耦合系数进行了实验测试,测试结果与解析结果和数值模拟结果吻合得较好。      

径向复合圆柱压电超声换能器

提出一种三元径向复合圆柱压电超声换能器,并对其径向振动特性进行了研究。基于弹性力学理论及机电类比原理,导出了柱坐标系中分割处理径向极化压电陶瓷管准厚度模振动及薄壁短圆管径向振动的机电等效电路;利用径向力和振速连续的边界条件,得出了径向复合圆柱压电换能器系统的径向振动机电等效电路及其共振频率方程。探讨了换能器径向共振频率及有效机电耦合系数随其几何尺寸的变化关系。研究表明,换能器的径向共振频率及有效机电耦合系数随其内芯半径和预应力管壁厚度增大而降低。研制了一些径向复合圆柱压电换能器,并对其径向共振频率进行了测试。结果表明,理论与实验结果基本一致。      

Essentially nonlinear piezoelectric shunt circuits applied to mistuned bladed disks

An essentially nonlinear piezoelectric shunt circuit is proposed for the practical realization of nonlinear energy sink, and then applied to a mistuned bladed disk for blade vibration reduction. First, the global dynamics of a single degree-of-freedom linear mechanical oscillator, coupled to an essentially nonlinear shunted piezoelectric attachment, is studied. Under certain conditions, the nonlinear targeted energy transfer, i.e. a fast, passive energy transfer from the mechanical oscillator to the nonlinear attachment is observed. A numerical method, referred to as the variable-coefficient harmonic balance method, is developed to calculate quasi-periodic responses arising in the electromechanical system under harmonic forcing. Characterized by the nonexistence of a resonance frequency, the essentially nonlinear shunt circuit is able to work robustly over a broad frequency band with a smaller inductance requirement compared with the linear resonant shunt circuit.     

基于2-2型压电复合材料的新型宽频带径向振动超声换能器

本文提出了一种基于2-2型压电复合材料的新型宽频带径向振动超声换能器,它主要由内金属圆环和外压电陶瓷复合材料圆环组成.首先利用Newnham串并联理论和均匀场理论推导了2-2型压电复合材料的等效参数;其次利用解析法得到了金属圆环和径向极化压电复合陶瓷圆环径向振动的机电等效电路;最后得到了换能器的六端机电等效电路,从而得到了换能器的频率方程.接着分析了换能器共振频率和反共振频率以及有效机电耦合系数与几何尺寸、两相体积占比的关系,采用仿真软件对新型换能器的径向振动进行了数值模拟.结果表明,利用解析法得到的共振频率和反共振频率与数值模拟结果吻合较好.此外,对换能器在水下的辐射声场进行了仿真研究,结果表明新型复合材料径向换能器相比传统纯陶瓷径向换能器,发射电压响应幅值更大,工作带宽提高接近一倍,声匹配更佳.     

LCR分流电路下压电声子晶体智能材料的带隙

将带有LCR分流电路的压电陶瓷片对贴在铝和环氧树脂组成的声子晶体结构中.使智能材料的机械振动与压电陶瓷的压电效应耦合起来,推导出机械振动在压电陶瓷片上的等效附加应力;使LCR分流电路中的电磁振荡效应和声子晶体的能带特性有机结合,计算了在分流电路作用下智能材料扭转和弯曲振动的带隙特性,研究了电阻、电感、电容元件的改变对压电声子晶体智能材料带隙的影响.研究结果表明:在合理尺寸下,随着分流电路中电阻值的增大,带隙的频率范围变宽,但衰减幅值有所降低;电感和电容值的增大都可以使带隙向低频移动,带隙的衰减幅值随着电感值的增大而升高,但随着电容值的增大而降低.从而给压电声子晶体智能材料减震降噪的控制提供了一种新思路.     

阶梯圆环压电超声换能器径向振动性能的理论研究*

提出了一种阶梯圆环径向振动压电超声换能器,根据力电类比原理建立了阶梯圆环及阶梯圆环换能器的径向振动等效电路,推导了阶梯圆环的径向共振频率方程和位移放大系数,在此基础上进一步推导了换能器的径向共振和反共振频率方程。通过理论推导和有限元仿真模拟分析了阶梯圆环压电超声换能器的径向振动性能。结果表明,增大阶梯圆环中内外环的径向厚度之比K1或减小轴向厚度之比K2,阶梯圆环的一阶径向共振频率减小,二阶径向共振频率增大;在二阶径向共振模式下,K1、K2值在一定范围内阶梯圆环可实现由内向外的径向位移振幅放大;随着压电陶瓷圆环的内半径增大,阶梯圆环压电超声换能器的一阶、二阶径向共振和反共振频率减小,二阶径向共振下的有效机电转换系数趋于零;增大阶梯圆环内环的外半径,换能器的一阶径向共振和反共振频率减小,二阶径向共振和反共振频率先增大后减小,理论推导与仿真模拟结果符合良好。本文研究结果为阶梯圆环压电超声换能器的工程应用提供理论参考。     

嵌入压电基底蜂窝状声子晶体声表面波带隙特性

提出了将部分镍圆柱体镶入128°YX-LiNbO₃基底的二维蜂窝状压电型声子晶体。用有限元法结合低反射边界条件计算并分析了该结构的能带结构与传输损失。结果显示:与倒圆锥体结构相比,镶入型结构具有更低的声表面波(SAW)带隙,原因是将部分柱体嵌入到基底中增加了共振体的质量。通过分析带隙边缘处振动本征模态结合传输损失发现,第一SAW带隙是由局域共振机理打开,第二SAW带隙同时具有Bragg散射特性和局域共振特性。应用质量弹簧振动系统估算了第一SAW带隙的起始频率,结果为82.98 MHz。此外,讨论了柱体几何参数对带隙特性的影响。该研究为微米尺度SAW声子晶体的带隙调控奠定了一定基础。      

悬臂梁压电振子宽带低频振动能量俘获的随机共振机理研究

研究了利用系统非线性来提高悬臂梁压电振子宽带低频振动能量俘获效率的随机共振机理,通过增加一对矩形永磁铁对传统线性悬臂梁压电振子结构进行了改进,结果揭示:在外部非线性磁力作用以及合适的磁铁间距条件下,这种外加磁力悬臂梁压电振子会构成一个双稳系统,在外部宽带低频随机振动源激励下发生随机共振现象,且发生随机共振时的输出电压明显增大,从而可以扩展悬臂梁压电振子的共振频率范围、提高低频振动能量的转化输出. 关键词： 压电悬臂粱 振动能量俘获 宽带低频 随机共振     

局域共振复合单元声子晶体结构的低频带隙特性研究

本文提出了一种新型局域共振复合单元声子晶体结构, 并结合有限元方法对结构的带隙机理及低频共振带隙特性进行了分析和研究. 共振带隙产生的频率位置由所对应的局域共振模态的固有频率决定, 并且带隙宽度与局域共振模态的品质因子及其与基体之间的耦合作用强度有关. 采用局域共振复合单元结构可以实现声子晶体的多重共振, 在低频范围能打开多条共振带隙, 但受到共振单元排列方式的的影响. 由于纵向和横向局域共振模态的简并, 复合单元结构能在200 Hz以下的低频范围打开超过60%宽度的共振带隙, 最低带隙频率低至18 Hz. 这为声子晶体结构获得低频、超低频带隙提供了一种有效的方法. 关键词： 局域共振 低频带隙 复合单元 声子晶体     

X形超阻尼局域共振声子晶体梁弯曲振动带隙特性

以声子晶体理论为基础,设计了一种具有超阻尼特性的X形局域共振结构,分析了周期性附加X形局域共振的梁弯曲振动传播特性.利用拉格朗日方程分析了X形局域共振结构动力学等效特性,揭示了该结构的阻尼放大的机理,分析了几何结构参数对于带隙特性的影响,并利用有限元法验证了X形局域共振结构的超阻尼特性.研究结果表明,周期性附加X形局域结构能够有效地抑制低频弯曲振动在梁中的传播,产生超阻尼特性,实现低频、宽带的减振效果,为结构的低频减振提供了一个新的设计方案.     

Mode analysis of trilaminar bender bar transducers using an approximation method

Based on the vibration theory of a thin plate, an analytical treatment of the trilaminar bender bar with piezoelectric elements and inert substrate of various lengths is presented for mode analysis. Resonance frequency and effective electromechanical coupling coefficient are calculated by this method. The impacts of the geometries of the bender bar on the performance of its fundamental and third-order flexural mode are investigated in detail under rigid boundary conditions. It is shown that resonance frequency is extremely sensitive to the thickness of inert substrate. Moreover, the effective electromechanical coupling coefficient has peaks as the length of piezoelectric elements varies. The peaks are achieved when the length of piezoelectric elements equals the length between two nodes having zero strains in the x-direction. The trilaminar bender bar will be effectively excited when the strains on the piezoelectric element are in the same phase, which is important to disclose the vibration mechanisms of this kind of transducer. Also, analytical results are compared with the ones of numerical simulation. The results suggest that effective electromechanical coupling coefficient shares similar patterns with electrical conductance, which can be used to characterize transducer performance to a certain extent. It also demonstrates that the analytical treatment provides an efficient alternative way for optimizing the bender bar transducer design.     

幂函数型环形聚能器径向振动的等效电路

基于机电类比原理和变厚度薄圆环的平面应力方程,推导了幂函数型环形聚能器径向振动的等效电路、共振频率方程和位移放大系数。讨论了第一、二阶径向共振频率及相应的位移放大系数随圆环半径比的变化关系。结果表明,幂函数型环形聚能器径向振动的等效电路是一种非互易二端口等效网络;一阶和二阶共振频率随圆环内外半径比的增大而增大;一阶径向共振模式下位移放大系数随圆环半径比的增大先降低后升高,二阶径向共振模式下位移放大系数随圆环半径比的增大而降低,但二阶时的位移放大系数整体大于一阶,因此二阶径向共振模式具有更好的径向振动性能。用COMSOL有限元软件对解析理论分析结果进行了验证,仿真模拟结果与解析理论符合良好。根据幂函数型环形聚能器的等效电路模型,进一步设计了一种压电环形换能器,计算了第一、二阶径向共振频率、反共振频率及有效机电耦合系数,通过与COMSOL有限元软件模拟结果对比,符合良好。本文研究结果为幂函数型环形聚能器及压电环形换能器的工程应用提供了简明设计理论,文中研究结论可作为一种径向超声切割刀在超声工程中获得重要应用。      

Study on rectangular ultrasonic radiator of flexural resonant vibration in high modes

Based on the theory of coupling vibration and flexural vibration of thin rod of rectangular cross section, the fiexural vibration of rectangular thin plate was studied. The frequency equation was derived under the condition of freeboundaries. The normal modes and the relation between the normal modes and the resonant frequency were obtained. Experiments showed that the calculated resonant frequencies agree well with the measured results, and the rectangular thin plate in flexural vibration has abundant resonant frequencies. The radiator of flexural vibration used in ultrasonic cleaning and other techniques has the advantages of large acoustic radiating area, uniform acoustic field and easy adjustment of resonant frequencies, proving that it is a promising ultrasonic source.     

一种高灵敏压电平面水声换能器

设计并制作了一种高灵敏压电平面水声换能器。该换能器敏感元件是对1-3-2型压电复合材料结构的改进,即在带基底的压电陶瓷小柱阵列间不注入聚合物,并在其上表面直接覆盖金属板,构成“带基底的压电小柱阵列+金属盖板”结构敏感元件(称为“空气填充型”敏感元件)。对“空气填充型”敏感元件的谐振频率进行了理论计算和有限元仿真,与实测结果较吻合。为便于对比性能,同时制作了同尺寸“1-3-2型压电复合材料+金属盖板”结构敏感元件(称为“聚合物填充型”敏感元件)换能器。分别对“空气填充型”和“聚合物填充型”敏感元件换能器的有效机电耦合系数、发送电压响应和接收灵敏度进行有限元仿真和实测,结果均显示,“空气填充型”敏感元件换能器具有较高的接收灵敏度,相较于“聚合物填充型”敏感元件换能器可提高21 dB。该敏感元件换能器能有效提高灵敏度,可为研制高灵敏换能器提供参考。      

高频宽带嵌套式复合材料换能器*

研制了一种嵌套式高频宽带复合材料换能器,利用1-3型压电复合材料Q值较低、频带较宽的特点,采用组合式的结构拓展换能器的工作带宽。通过切割框型压电陶瓷、灌注环氧树脂得到压电复合材料框型敏感元件,再将不同厚度的框型敏感元件沿轴向嵌套从而制成多层嵌套的压电复合材料敏感元件。建立1-3型压电复合材料中压电小柱的等效电路,根据等效电路计算出压电小柱的谐振频率,并与1-3型压电复合材料的谐振频率理论计算结果进行对比。通过ANSYS软件对敏感元件结构进行仿真,并根据仿真结果确定了敏感元件的最佳设计方案。最终制作出的换能器进行水下测试,该换能器的谐振频率为310kHz,最大发送电压响应为188.5dB,-3dB带宽可达130kHz,接收灵敏度最大可达-186.8dB,-3dB带宽可达90kHz,谐振频率处-3dB的指向性开角约为2.4°。该嵌套式敏感元件可实现换能器宽带发射与接收声波的目标。     

矩形辐射器压电多频超声换能器的研究

研究了一种具有多个共振频率的矩形辐射器夹心式超声换能器,换能器由圆柱形后盖板、压电陶瓷晶堆及矩形六面体辐射器前盖板组合而成。利用表观弹性法和一维近似理论给出了多频换能器横向及纵向理论共振频率方程。对一种特殊情况下的此类换能器进行了有限元及实验分析,给出了各自的频率输入导纳曲线。对理论和实验结果进行分析后表明,此类矩形辐射器夹心式超声换能器可以在不同的振动模态上工作,具有多个共振频率.     

Flexural vibration band gaps in a thin plate containing a periodic array of hemmed discs

Using a periodic expansion by means of the Bloch theorem, the flexural vibration band gaps are studied in a thin plate with two-dimensional ternary locally resonant structures, i.e. a thin epoxy plate containing a periodic square array of lead discs hemmed around by rubber. The full band gaps of flexural vibration in the thin plate are obtained within which sound and vibration will be forbidden. The numerical results are used to show how the width of the first full band gap depends on the radius ratio of lead disc to hemmed disc, filling fraction, lattice constant (distance between the centers of the nearest lead discs) and thickness of the thin plate. It is observed that the gap width can be changed a lot by modulating these physical parameters.     

多振子梁弯曲振动中的局域共振带隙

从梁的弯曲振动方程出发,利用传递矩阵法,给出了无限周期结构的一维多振子声子晶体梁的弯曲振动能带结构,并利用有限元方法计算了有限周期结构梁的弯曲振动频率响应.建立了多振子声子晶体梁的简化模型,推导出带隙起始截止频率公式.结果表明:一维多振子声子晶体梁具有比单振子声子晶体梁更宽更丰富的振动带隙,可应用于呈倍频关系的减振降噪中;振动在带隙频率范围内频率响应具有明显的衰减;所建立的简化模型与理论模型结果符合较好.研究工作为梁类结构的减振提供一种新的思路.     

Lamb wave band gaps in locally resonant phononic crystal strip waveguides

Using finite element method, we have made a theoretically study of the band structure of Lamb wave in a locally resonant phononic crystal strip waveguide with periodic soft rubber attached on the two sides of epoxy main plate. The numerical results show that the Lamb wave band gap based on local resonant mechanism can be opened up in the stub strip waveguides, and the width of the local resonant band gap is narrower than that based on the Bragg scattering mechanism. The results also show that the stub shape and width have influence on the frequency and width of the Lamb wave band gap.