共查询到20条相似文献,搜索用时 15 毫秒
1.
Backing effects on the underwater acoustic absorption of a viscoelastic polymer slab embedded with locally resonant scatterers are reported. The polymer slab is embedded with two layers of locally resonant scatterers, i.e. Al spheres coated by soft silicon rubber. Theoretical absorption coefficients of the polymer slab under different backings using a layer multiple scattering method show good agreement with the experimental results, which supports unambiguously the experimental observation. Then relations between the resonance modes and the low-frequency absorption peaks of the composite slab are clarified to address the absorption mechanisms. It shows that the mass of the steel backing affects evidently the low-frequency absorption, the absorption peak shifts to lower frequency range while increasing the backing mass. 相似文献
2.
Rubber layers with air-filled cavities or local resonance scatters can be used as anechoic coatings. A lot of researches have focused on the absorption mechanism of the anechoic coatings. As the anechoic coatings are bonded to the hull of submarine, the vibration of the hull should not be neglected when the analysis of the absorption characters is carried out. Therefore, it is more reasonable to treat the anechoic coating and the backing as a whole when the acoustic performance is analyzed. Considering the effects of the steel plate backing, the sound absorption performances on different models of anechoic coatings are investigated in this paper. The Finite Element Method is used to illustrate the vibrational behaviors of the anechoic coatings under the steel backings by which the displacement contours is obtained for analysis. The theoretical results show that an absorption peak is induced by the resonance of the steel slab and rubber layer. At the frequency of this absorption peak, the steel plate and the coating vibrates longitudinally like a mass-spring system in which the steel slab serves for mass and the coating layer is the spring. To illuminate the effects of the steel slab backing on the acoustic absorption, the thicknesses of the steel slab and the anechoic layer are discussed. Finally, an experiment is performed and the results show a good agreement with the theoretical analysis. 相似文献
3.
Wen J Zhao H Lv L Yuan B Wang G Wen X 《The Journal of the Acoustical Society of America》2011,130(3):1201-1208
Recently, by introducing locally resonant scatterers with spherical shape proposed in phononic crystals into design of underwater sound absorption materials, the low-frequency underwater sound absorption phenomenon induced by the localized resonances is observed. To reveal this absorption mechanism, the effect of the locally resonant mode on underwater sound absorption should be studied. In this paper, the finite element method, which is testified efficiently by comparing the calculation results with those of the layer multiple scattering method, is introduced to investigate the dynamic modes and the corresponding sound absorption of localized resonance. The relationship between the resonance modes described with the displacement contours of one unit cell and the corresponding absorption spectra is discussed in detail, which shows that the localized resonance leads to the absorption peak, and the mode conversion from longitudinal to transverse waves at the second absorption peak is more efficient than that at the first one. Finally, to show the modeling capability of FEM and investigate shape effects of locally resonant scatterers on underwater sound absorption, the absorption properties of viscoelastic materials containing locally resonant scatterers with ellipsoidal shape are discussed. 相似文献
4.
5.
Localized resonance in phononic crystal, composed of three-dimensional arrays of composite units, has been discovered recently. The composite unit is a high-density sphere coated by soft silicon rubber. In this Letter, the absorptive properties induced by the localized resonance are systemically investigated. The mode conversions during the Mie scattering of a single coated lead sphere in unbounded epoxy are analyzed by referring the elements of the scattering matrix. Then the anechoic properties of a slab containing a plane of such composite scatterers are investigated with the multiple-scattering method by accounting the effects of the multiple scattering and the viscous dissipation. The results show that the longitudinal to transverse mode conversion nearby the locally resonant region is an effective way to enhance the anechoic performance of the finite slab of phononic crystal. Then, the influences of the viscoelasticity of the silicon rubber and the coating thickness on the acoustic properties of the finite slab are investigated for anechoic optimization. Finally, we synthetically consider the destructive scattering in the finite slab of phononic crystal and the backing, and design an anechoic slab composed of bi-layer coated spheres. The results show that the most of the incident energy is absorbed at the desired frequency band. 相似文献
6.
在吸声覆盖层水声声管测试的实验研究中,覆盖层背衬的选择对测量结果有重大影响。在我们二维理论研究的基础上,建立了吸声覆盖层声学特性的传递函数模型,分析比较了不同背衬对吸声覆盖层声学性能的影响。结果表明,不同背衬对吸声覆盖层吸声性能的影响具有明显不同的特性。背衬为双层壳体时,水层对吸声覆盖层的吸声系数曲线有明显的调制现象。背衬为单层壳体或双层壳体时,从整体上讲,吸声系数更趋近于刚性背衬而非软背衬的情况。在实验室小样品声管测试中,以较厚的钢柱作为背衬的测试数据来衡量吸声覆盖层性能更为合适,且易于实现。 相似文献
7.
The crystal under consideration is a layered structure consisting of alternating layers of two materials, one of which is
a resonantly absorbing gas. It is shown that the combination of the dispersion of an atomic gas with the dispersion of a photonic-bandgap
structures allows one to efficiently control the transmission spectra of s- and p-polarized modes in these combined systems. It is found that the spectrum is highly sensitive to the position of the gas resonance
frequency with respect to the bandgap edge and to a change in the gas pressure. The transmission, reflection, and absorption
spectra of the resonant photonic crystal are studied at an angle of incidence equal to the Brewster angle of a seed photonic
crystal. Possible applications of the found particular features of the dispersion of resonant photonic crystals are discussed. 相似文献
8.
在谐振腔设计过程中, 谐振腔的品质因数以及谐振频率都是需要考虑的关键因素. 传统的方法是通过减小谐振腔的尺寸或者利用高次模来提高谐振腔的谐振频率, 但是由于两种方法都有其局限性, 导致设计结果并不理想. 通过理论计算与模拟仿真相结合的方法, 对影响谐振腔谐振频率的因素进行分析, 得出了填充介质的材料属性与谐振腔谐振频率的关系. 理论计算显示: 当用“左手介质”作为谐振腔的填充物质时, 可以在不改变谐振腔尺寸的基础上提高谐振频率. 高频结构仿真器(high frequency structure simulator)的仿真数据也证明了以上结果, 从而得出谐振腔的谐振频率可以不受谐振腔尺寸的限制. 相较于传统理论而言, 研究结论有进一步的发展, 为探索和设计新颖的谐振腔提供了理论依据. 相似文献
9.
10.
Nonperturbative solutions to cylindrical resonant cavities with dissipative medium and imperfectly conducting walls 下载免费PDF全文
Cylindrical waveguides without end surfaces can serve as
two-dimensional resonant cavities. In such cavities the
electromagnetic oscillations corresponding to an eigenfrequency can
always be taken as TM or TE modes even when the walls have a finite
conductivity and the medium is absorptive. This paper obtains
analytic solutions to the field equations when the cylinder has a
circular cross section. Some nonperturbative conclusions are drawn
from the eigenvalue equation. Approximate analytic results for the
resonant frequencies are obtained when the absorption of the medium
is small and the walls are good conductors. Stability of the eigen
modes is discussed. Similar results for the coaxial line are
presented. 相似文献
11.
Xue-Feng Zhu 《Physics letters. A》2013,377(31-33):1784-1787
Here in locally resonant acoustic material, it is shown that effective zero refractive index can be constructed by the resonant unit-cells with coherent degenerate monopole–dipole momenta. Due to strong local resonances, the material layers with effective zero refractive index can function as a resonant cavity of high Q factor, where a subtle deviation from the resonant frequency may result in distinct increase of reflection. Full-wave simulations are performed to demonstrate some unusual wave transport properties such as invisibility cloaking, super-reflection, local field enhancement, and wavefronts rotation. 相似文献
12.
The study of acoustic metamaterials, also known as locally resonant sonic materials, has recently focused on the topic of underwater sound absorption. The high absorption occurs only within a narrow frequency band around the locally resonant frequency. Nevertheless, this problem can be addressed through a combination of several acoustic metamaterial layers that have different resonant frequencies. In this paper, an optimization scheme, a genetic and a general nonlinear constrained algorithm, is utilized to enhance the low-frequency underwater sound absorption of an acoustic metamaterial slab with several layers. Both the physical and structural parameters of the acoustic metamaterial slab are optimized to enlarge the absorption band. In addition, the sound absorption mechanism of the acoustic metamaterial slab is also analyzed. The result shows that each layer is found to oscillate as a nearly independent unit at its corresponding resonant frequency. The theoretical and experimental results both demonstrate that the optimized metamaterial slab can achieve a broadband (800–2500 Hz) absorption of underwater sound, which is a helpful guidance on the design of anechoic coatings. 相似文献
13.
提出一种具有水平无指向性、低频、宽带、大功率特点的新结构换能器——“星型”柱面发射换能器,换能器由共享后质量块的6个复合棒换能器按“星型”方式组成柱面结构。采用有限元方法对换能器进行了分析设计并制作了换能器样机。在1—10 kHz内,换能器有3个主要工作模态,前两阶工作模态对换能器工作带宽的展宽有贡献,第三阶模态显示出较强的指向性,水池测试换能器具有1倍频程的工作带宽,最大声源级为199.1 dB。有限元模拟结果和实验结果符合较好。研究结果表明,新结构换能器在满足水平无指向性的前提下,利用复合棒的纵振及辐射面的弯曲振动实现了低频、宽带、大功率的要求,提供了一种设计该特性换能器的新思路。 相似文献
14.
A new integrated active sound absorptive terminal using vector hydrophones is developed for the anechoic terminal of impedance tube,with which the reflected and the incident waves can be separated.The method overcomes the limitations imposed by the sensor spacing and measuring frequency range in the traditional two-hydrophone method,and can effectively expand low-frequency sound absorption band of the terminal.The effect of hydrophone sensitivity on the sound absorptive performance of the terminal is evaluated,a correction method is also provided for the reflection and transmission coefficient.The experimental results show that the absorption coefficient in the frequency band of 0.1-2 kHz is over 0.98,which agrees well with the theoretical results. 相似文献
15.
16.
Xiangmin Liu Pengfei Zhu Zonglin Yan Jiangwen Wu Qingfen Yang 《Optics Communications》2008,281(2):273-277
The accurate reflection coefficient of prism waveguide coupler that takes coherence property of incident light into account is obtained at first. Based on the reflection coefficient, the effect of coherence property of incident light on prism coupling is discussed in this work. It is shown that extra damping in waveguide caused by the coherence property is larger for high-order resonant mode than that for low-order mode. For 100 fs Gaussian pulses incidence, the reflected spectra at different resonant modes are obtained theoretically and experimentally, which show that coherence property has a strong effect on prism coupling at high-order modes. 相似文献
17.
18.
A resonant cavity-enhanced (RCE) quantum dot (QD) field-effect transistor (RCEQDFET) is designed for single- photon detection in this paper. Adding distributed Bragg reflection (DBR) mirrors to the single-photon detector (SPD), we improve the light absorption efficiency of the SPD. The effects of the reflectivity of the mirrors, the thickness and light absorption coefficient of the absorbing layer on the detector's light absorption efficiency are investigated, and the resonant cavity is determined by using the air/semiconductor interface as the mirror on the top. Through analyzing the relationship between the refractive index of AlxGal_xAs and A1 component, we choose A1As/Alo.15Gao.85As as the material of the mirror on the bottom. The pairs of A1As/Alo.15Gao.85As film are further determined to be 21 by calculating the reflectivity of the mirror. The detector is fabricated from semiconductor heterostructures grown by molecular beam epitaxy. The reflection spectrum, photoluminescence (PL) spectrum, photocurrent response, and channel current of the detector are tested and the results show that the RCEQDFET-SPD designed in this paper has better performances in photonic response and wavelength selection. 相似文献
19.
A.E. Korolev 《Optics & Laser Technology》1996,28(4):277-284
Problems of dynamic hologram recording on resonant absorption lines of alkali metal vapour are discussed. Light beams and media parameters are determined that are necessary for hologram recording with usable efficiency. The effects of thermal atomic motion and the radiative transport of excitation influence on the spatial frequency transfer function of two-level media are investigated. Results of hologram recording in vapour of Rb (780.0 nm) and Cs (852.1 nm) using low-power CW-lasers are presented. Transmission holograms in the volume media and reflection holograms near the boundary of the resonant vapour and the dielectric are compared. For transmission holograms the advantage of collinear read-out when using pure vapour in comparison with a counterpropagating read-out is shown, and this makes it possible to achieve higher values of hologram efficiency over a wide range of atomic density. It is shown that reflection hologram recording is characterized by higher resolution, as compared with hologram recordings in the volume of extended media. Problems of metal vapour hologram usage for laser parameter control are discussed. The feasibility of holograms in Cs-vapour usage as a spectral-selective real-time feedback element in a semiconductor laser external cavity is shown. 相似文献
20.
针对超材料吸波频带窄的问题,采用金属螺旋环超表面与碳纤维吸波材料相复合的方式,设计了宽频高性能复合吸波体.研究发现,在碳纤维吸波材料中引入双层螺旋环超表面能显著增强吸收峰值和吸波带宽,且适当增加螺旋环初始线长和吸收层厚度有利于提高复合吸波体的吸波性能, 9.2—18.0 GHz频段的反射损耗均优于–10 dB (带宽达8.8 GHz),吸收峰值达–14.4 dB.利用S参数计算得到螺旋环-碳纤维复合吸波体的等效电磁参数和特征阻抗呈现多频点谐振特性,通过构建双层螺旋环超表面等效电路模型,定量计算了复合吸波体的电磁谐振频点,发现由等效电路模型获得的谐振频点计算值与仿真值基本相符,说明该复合吸波体多频点电磁谐振是宽频电磁损耗的主要机制. 相似文献