基于自由曲面的紧凑型宽波段成像光谱仪设计

针对基于传统光学元件的成像光谱仪,在实现大视场与宽波段的同时难以满足结构紧凑的问题,在Offner成像光谱仪的第三反射镜引入圆锥曲面叠加条纹泽尼克多项式表征的自由曲面。基于矢量像差理论,分析了四阶以下的泽尼克多项式在系统中引入的像散与系统视场、波长的关系,通过选取合理的多项式叠加到圆锥曲面,设计了一款工作于可见光到短波红外波段（400～2500 nm）、体积仅42 mm×82 mm×100 mm的成像光谱仪。系统实现了双波段探测,来自两个不同宽度狭缝的光线经光栅分光后,通过分束器将工作波段分为可见近红外（400～1000 nm）和短波红外（1000～2500 nm）,优化设计结果表明,光谱分辨率分别为2.8 nm和4 nm,成像质量良好,为实现宽波段紧凑型成像光谱仪的设计提供了理论参考。     

基于离轴三反光学系统的高分辨率中阶梯光栅光谱仪

基于离轴三反光学系统和多列线阵探测器,设计了一种具有宽波段高光谱分辨率的中阶梯光栅光谱仪.首先,以仪器性能指标为约束优化中阶梯光栅的结构参数,使光栅在保证高色散的同时将宽工作波段折叠重合在较小的光谱级次内,并采用多列线阵探测器采集信号.然后,以离轴三反光学系统作为会聚镜,以离轴抛物镜作为准直镜,实现了高色散宽自由光谱的像差校正.最终,设计的中阶梯光栅光谱仪工作波段为400～900 nm,F数为4.5,光谱分辨率在402.31,541.82,870.48 nm时分别为0.003,0.004,0.005 nm,系统体积为380 mm×325 mm×230 mm.     

超短脉冲激光瞄准装置光学系统设计

为了提高超短脉冲激光的瞄准精度,基于自准直原理提出瞄准装置光学系统。以670 nm光纤耦合激光器为光源,设计指示光准直、扩束光学系统,准直光的不平行度达到3.2,设计焦距为350 mm,相对孔径1/5,离轴量50 mm的主激光离轴抛物面镜,其成像质量达到衍射极限,基于准直束光学系统和离轴抛物面镜,设计可适应670 nm和800 nm两种波长的20和100的瞄准和监测成像光学系统。提出一种小孔准直的安装调试方法,以指示光进行实验验证,结果表明:设计的光学系统成像光斑均匀,其物方分辨率达到4.1 m。     

小型高光谱分辨率光栅单色仪的研制

单色仪是成像光谱仪进行光谱连续定标的必备设备,为了对高光谱成像光谱仪进行连续光谱定标,设计了一种轻小型高光谱分辨率的光栅单色仪。采用水平式Czerny-Turner光路结构,以高光谱分辨率为出发点,通过推导计算,从光栅选型、焦距计算、狭缝尺寸的确定等方面详细论述了光栅单色仪的设计思路,给出仪器的重要必要结构参数,并论述了这些结构参数对仪器光谱分辨率和体积的影响。根据光栅单色仪的光路特点,对入射狭缝组件、准直物镜组件和成像物镜组件、扫描结构、机身等进行轻小型机械结构设计,并给出正弦杆扫描机构的结构参数与仪器输出波长和波长扫描精度的数学关系,完成了仪器的整体结构设计和装调。应用汞灯可见光光谱进行波长定标,采用最小二乘法得到定标曲线,并提出步进数极限误差与定标曲线相结合的方法,求得仪器的波长重复性和波长准确度;仪器在400~800 nm波长范围内,光谱分辨率优于0.1 nm,波长重复性达±0.096 6 nm,波长准确度达±0.096 9 nm。     

星载宽视场差分吸收成像光谱仪光学设计

研究星载宽视场差分吸收成像光谱仪已成为空间大气遥感领域的迫切需求,根据宽覆盖轻小型星载大气痕量气体差分吸收成像光谱仪的研究目标,采用偏轴两镜系统和中继系统匹配的结构型式设计出无遮拦宽视场望远系统,将宽视场望远系统和Offner光谱成像系统匹配,设计了一个视场60°×0.24°、相对孔径1/3、工作波段280~450 nm的星载宽视场差分吸收成像光谱仪光学系统,利用光学设计软件Zemax-EE进行了光线追迹和优化设计,光谱成像系统不同波长的点列图半径的均方根(RMS)值均小于5 mm,光谱分辨率0.692 nm,满足不大于1 nm的指标要求,差分吸收成像光谱仪全系统在空间方向各波长在特征频率处的光学传递函数均达到0.67以上,完全满足成像质量要求,适合空间大气遥感应用。     

空心阴极元素灯光谱的空间分布测量方法

提出利用成像光谱仪研究空心阴极元素灯光谱空间分布的检测方法。自制了基于Offner成像系统的推扫式凸面光栅成像光谱仪,覆盖波长范围400~1 000 nm,视场角22°,光谱分辨率2~3 nm;利用该光谱仪第一次得到得到Hg元素灯光谱的空间分布,给出了不同波长下的空间图像和不同空间位置的光谱分布信息,具有较高的空间分辨率和光谱分辨率;并同时获取了不同工作电流条件下的元素灯高光谱数据,对比分析了处于不同工作状态下光谱空间分布的差异。这为空心阴极元素灯光谱的空间分布等性能研究提供了一个很好的工具,相关方法也可以用来研究其他类型的光源。     

PGP成像光谱仪的全视场自动化光谱定标方法

为了对PGP成像光谱仪所获得的光谱数据进行定量化分析,需对PGP成像光谱仪进行光谱定标,以获得各光谱通道的中心波长、光谱分辨率及成像光谱仪的光谱弯曲等光谱特性信息。采用单色准直光法设计了一套全视场自动化的光谱定标系统,系统中引入球面镜为待测的成像光谱仪光谱定标提供准直光,通过可自动控制的折转镜改变定标入射光线的入射角,以此实现待测成像光谱仪空间维不同视场的自动化光谱定标。运用该定标系统对PGP成像光谱仪进行光谱定标实验,得到该成像光谱仪的光谱性能参数,并结合定标系统的结构特点,对实验的结果进行了精度分析。实验分析结果表明该系统对PGP成像光谱仪的中心波长定标精度达到0.1 nm,光谱分辨率定标精度达到1.3%。该研究设计的全视场自动化光谱定标系统具有结构新颖紧凑、通用性较强、光谱定标精度较高等特点,且由于自动化的控制,避免了由于人为参与定标过程所带来的额外误差。该系统可用于实现PGP成像光谱仪及其他同类型成像光谱仪的光谱定标。     

双光栅实现半导体激光阵列波长组束

在波长光束组合基础上,用一个光栅和一个准直透镜代替传输透镜,可以有效地减小单个发光单元光束质量的退化,明显地克服相邻发光单元的反馈串扰,实现了较窄线宽的光谱组束输出。采用标准的半导体激光阵列,连续输出激光功率44.8 W,电光转换效率最高38.9%,光谱线宽为4.1nm。光束慢轴方向光束质量因子为11.7,快轴方向光束质量因子为1.37,快慢轴两个方向都接近单个发光单元光束质量。     

宽谱段高分辨扫描光谱定标技术

为了满足原子发射光谱仪在紫外至近红外宽谱段范围内的高光谱分辨率快速检测需求,采用精密角位移平台直接驱动光栅,配合面阵探测器,实现高精度光谱分段快速扫描探测。但在扫描过程中,探测器像元波长增量与光栅转角呈非线性关系,且不同像元的波长增量不同,这对该光谱仪波长定标造成障碍。为校正光栅色散的非线性,基于光栅方程精确计算光栅转角与探测器首尾两端像元波长的映射关系,针对同一光栅转角,探测器其余像元波长利用首尾像元波长按照局部线性色散规律计算得到,从而完成全谱段光谱定标。依据定标所得转角与探测波段对应关系依次驱动光栅转动,实现宽谱段范围内的分段高精度光谱快速扫描探测。利用汞灯光源对该定标方法的波长检测精度进行检验,在200~800 nm的宽谱段范围内,波长准确度优于0.018 nm,波长重复性优于0.001 nm。     

空间大气遥感高光谱成像仪光学系统设计

多模式高光谱成像仪已成为空间大气遥感领域的迫切需求,根据多模式空间大气遥感的研究目标,采用扫描系统、离轴抛物面望远系统和双光谱仪级联色散光谱成像系统匹配的结构型式,设计了一个瞬时视场1.8°×0.045°、相对孔径1/2、工作波段250~500nm的星载天底-临边多模式高光谱成像仪光学系统,分成250~330nm和320~500nm两个波段同时探测,利用光学设计软件ZEMAX-EE中进行了光线追迹和优化设计,色散方向不同波长的点列图半径的均方根(RMS)值均小于9.5μm,在250~330nm波段,光谱分辨率为0.17nm,在320~500nm波段,光谱分辨率为0.37nm,均满足小于等于0.6nm的指标要求,高光谱成像仪全系统在空间方向各波长在特征频率处的光学传递函数均达到0.9以上,完全满足成像质量要求,适合空间大气遥感应用。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.