基于非局部均值滤波与时域高通滤波的非均匀性校正算法

时域高通滤波非均匀性校正是一种典型的基于场景的红外焦平面阵列非均匀性校正算法,但其易产生"鬼影"现象,影响校正效果.本文在时域高通滤波校正算法的原理基础上,分析了其校正过程中"鬼影"现象产生的原因,即由于全部图像信息的叠加而导致静止场景被滤除且运动场景会在当前位置留下反转的图像,从而形成"鬼影".引入非局部均值滤波方法,提出了一种去"鬼影"的非局部均值滤波-时域高通滤波非均匀性校正方法.该方法首先采用非局部均值滤波将图像信息分离成高低频两部分(其中高频成分含有大部分噪音及非均匀性),并使用高频成分进行时域高通滤波算法中低通输出的递归运算,使得低通滤波后的图像含有较少的场景信息,从而可使校正输出图像含有较少的"鬼影"现象.采用两组真实红外序列图像进行验证,结果表明该算法不仅能获得较好的非均匀性校正效果,而且能较好地抑制时域高通滤波算法中的"鬼影"现象.     

基于扩展全变分的红外焦平面阵列非均匀性校正方法

针对传统的基于场景的红外焦平面阵列非均匀性校正算法收敛速度慢和校正精度不高的缺点,提出了一种基于扩展全变分的红外焦平面阵列非均匀性校正方法。在分析全变分算法的图像去噪性能的基础上,针对运动的红外图像序列,扩展了全变分的应用范围。通过最小化非均匀校正后图像的全变分,利用最陡下降法,得到计算增益量校正因子和偏移量校正因子的迭代公式。针对校正图像存在的鬼影现象,设计了一种自适应阈值控制的鬼影消除方法。实验表明:相较于目前已有的方法,该方法有效地去除了原始红外图像的固定图案噪声,较大程度地保留了图像细节信息,提高了图像质量。     

基于Savitzky-Golay加权拟合的红外图像非均匀性条带校正方法

针对红外成像探测器单元响应不一致等因素导致的图像非均匀性条带问题, 提出了基于直方图加权和Savitzky-Golay拟合的非均匀性条带校正方法。首先, 计算每列的归一化直方图函数并将其作为权值对图像进行加权运算;然后, 利用Savitzky-Golay滤波器对加权后的图像列均值和列方差进行拟合, 并将结果带入校正公式, 通过可调参数的迭代完成校正。实验结果表明:该方法能有效地去除非均匀性条带, 保留图像的光谱辐射信息和纹理细节, 各项评价指标均提高10%。     

基于多尺度分析和加权最小二乘法的非制冷红外条纹噪声校正算法

为了提高红外成像质量的同时更大程度地保持纹理信息,提出一种多尺度分析和加权最小二乘法的条纹噪声非均匀性校正算法.该算法利用加权最小二乘法对图像进行平滑,应用小波变换提取平滑图像的垂直分量,并将其垂直分量替换为原始图像的垂直分量,利用小波重构输出校正后的图像.算法能够精准地去除红外噪声,而不会带来更加麻烦的"鬼影"问题.用该算法对多组不同红外图像数据进行仿真实验,并与其他先进的红外条纹非均匀校正算法进行对比分析,结果表明所提算法校正结果有较好的视觉效果和图像质量评估参数.     

基于时域矩匹配的红外图像自适应非均匀性校正EI北大核心CSCD

非制冷红外焦平面阵列的响应非均匀性通常表现出与条带噪声相类似的特性。基于场景的校正算法是提高图像质量,补偿响应特性漂移的有效措施。在深入研究矩匹配理论的基础之上,提出了一种新的时域矩匹配非均匀性校正方法。利用相邻帧矩匹配后的图像对场景的变化列进行估计,并在时间域对校正参数进行自适应更新。利用真实的红外图像序列验证了该算法在收敛速度和去鬼影方面的优越性和有效性。     

一种新的基于平稳小波变换的红外焦平面非均匀性校正技术

在分析固定图案噪音频率分布的基础上,提出了一种利用平稳小波进行非均匀性校正的方法.选择合适的小波函数对红外图像序列进行分解,从而估计出非均匀性校正的增益和偏置系数,最终实现红外焦平面阵列的非均匀性校正.利用小波的多分辨性质,提高了低频部分的频率分辨率,有效的抑制了一般基于场景统计校正算法中易于出现的“人工鬼影”现象.用真实的红外图像序列进行了处理,实验证明了算法的优越性.     

基于时域矩匹配的红外图像自适应非均匀性校正

非制冷红外焦平面阵列的响应非均匀性通常表现出与条带噪声相类似的特性。基于场景的校正算法是提高图像质量,补偿响应特性漂移的有效措施。在深入研究矩匹配理论的基础之上,提出了一种新的时域矩匹配非均匀性校正方法。利用相邻帧矩匹配后的图像对场景的变化列进行估计,并在时间域对校正参数进行自适应更新。利用真实的红外图像序列验证了该算法在收敛速度和去鬼影方面的优越性和有效性。     

基于自适应扩散模型的单帧红外条纹非均匀性校正算法

针对红外焦平面成像系统存在列向条纹非均匀性的现象,采用了一种基于自适应PM扩散模型的非均匀校正新算法。首先,综合利用图像梯度信息和局部灰度统计信息,自适应计算PM模型的扩散阈值;然后将每列像素的PM模型估计值作为该列像素的期望值;最后采用最陡下降法迭代计算得到每列像元的校正参数,并对结果进行循环校正以提高校正效果。实验结果表明:该算法可以保护图像边缘信息,与同类算法相比,能够更有效地抑制条纹非均匀性,并且能够防止图像产生鬼影。     

一种改进型最小均方误差红外图像条纹非均匀性校正算法

受限于材料和制造工艺，红外图像中普遍存在着条纹非均匀性，其严重影响了图像的成像效果，进而对后续的目标识别、检测等工作造成干扰。典型的最小均方误差（LMS）算法在一定程度上可以抑制条纹非均匀性，但其场景适应性差，存在拖尾和“鬼影”现象。提出一种改进型的最小均方误差（LMS）自适应滤波算法对图像进行处理，利用双边滤波和最速下降法快速获取准确的校正参数，将前一帧算出的校正结果作为后一帧的初始输入值，提升算法的准确性，同时算法还增加了边缘检测模块以保留图像细节。采用不同场景下非制冷型探测器的真实红外图像，从主观和客观两个方面对比了本算法和经典LMS算法，结果表明，提出的算法可以很好地保护图像细节，也具有良好的场景适应性。     

国产非制冷红外探测器新型场景校正方法

现有国产非制冷红外探测器多采用挡板校正进行非均匀性校正，影响了红外探测器的观测效果与目标搜跟。为了拓展红外探测器的应用方向与领域，提出了一种国产非制冷红外探测器新型场景校正方法，通过改进的神经网络场景校正方法去除高频非均匀性，再通过时空联合的低频滤波去除低频非均匀性。应用该方法的某国产非制冷红外机芯，工作1 h后图像非均匀性为0.5%。该方法具有良好的校正效果，并且能够有效地抑制“鬼影”现象，有利于减少红外成像系统的体积与功耗，有利于国产非制冷红外探测器在航天、航空、武器装备等多领域的应用。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.