一种便携式干涉仪动镜系统的设计

动镜扫描系统是傅里叶变换红外光谱仪中唯一不断运动的部件,其扫描的精度与行程直接影响仪器的信噪比、重复性与分辨率等指标。在利用立体角镜的光学特性和柔性簧片枢轴的机械特性的基础之上,设计了一种结构紧凑,体积小巧的干涉仪动镜扫描系统,设计了基于模糊控制算法的控制器,对动镜的扫描速度进行精密的控制。实验表明,动镜机构的扫描稳定性优于99.8%,所测得的红外光谱具有较高的信噪比能够满足高精度定量分析的要求。     

45°倾斜镜多自由度精调结构设计研究

对于高准确度光学系统,光学元件及其支撑机构之间的简单连接很难使光路对准并满足公差要求,本文介绍了一种在光学系统中能够对光路进行折转或分束的45°倾斜镜的精调支撑机构.该倾斜镜支撑结构采用了多自由度精调方式,能够在实现两维倾斜调整的同时,实现相互垂直光路的方向平移.设计中使用的柔性元件使结构的倾斜调整准确度达到角秒级,实现0~10 mm的位移,同时借鉴现有的燕尾槽导轨平移技术节省加工成本和减小周期,并且借助有限元分析软件,对机构中的关键部分进行了详尽的分析和论证.整个研究方法可作为同类光机系统设计时的参考,在光学系统的光路调整中有较大的应用价值.     

45°倾斜镜多自由度精调结构设计研究

对于高准确度光学系统,光学元件及其支撑机构之间的简单连接很难使光路对准并满足公差要求,本文介绍了一种在光学系统中能够对光路进行折转或分束的45°倾斜镜的精调支撑机构.该倾斜镜支撑结构采用了多自由度精调方式,能够在实现两维倾斜调整的同时,实现相互垂直光路的方向平移.设计中使用的柔性元件使结构的倾斜调整准确度达到角秒级,实现0~10 mm的位移,同时借鉴现有的燕尾槽导轨平移技术节省加工成本和减小周期,并且借助有限元分析软件,对机构中的关键部分进行了详尽的分析和论证.整个研究方法可作为同类光机系统设计时的参考,在光学系统的光路调整中有较大的应用价值.     

一种双曲面光学系统中次镜装调设计与实现北大核心CSCD

R-C(Ritchey-Chretien)光学系统作为两镜反射式光学系统,是双曲面光学系统的典型结构形式,在现代光学工程中具有重要的应用。以缩短高精度系统装调周期和指导高精度系统批量生产为目的,用某一机载星敏感器所应用的R-C光学系统为例,在确定以主镜为装调基准的前提下,针对直径较小的次镜,设计了一种次镜装调机构,实现次镜6个自由度调整,并对装调、固化过程中涉及的方法进行了说明。通过对装调前后以及环境试验后的系统像质进行测试,验证了设计机构的稳定性。测试结果表明:该次镜装调机构能够满足系统像质要求,整机波像差PV值优于(1/2)λ,RMS值优于(1/15)λ,装调方法达到可指导高精度系统批量生产的目的。     

指向摆镜的精度分析

在光学反射矢量公式的基础上,通过坐标变换和矢量分析,对指向摆镜的位置对地面观测目标的影响进行了分析,得出了在允许的光谱成像仪对地观测误差的条件下,指向摆镜的转角准确度和定位准确度,为指向摆镜的设计与装调提供了理论依据.     

交叉非对称型Czerny-Turner光谱仪光学系统设计

根据Czerny-Turner结构光谱仪工作原理,以便携式微型光学系统为设计目标,设计了一种光谱范围为200900nm的交叉非对称型Czerny-Turner光谱仪光学系统.通过分辨率、光谱范围等设计要求确定光谱仪大致结构后,引入初级像差对初始结构进行进一步优化.首次提出将球差约束条件与光阑面选取相结合,设计流程确定准直镜通光口径、光栅初始尺寸及聚焦镜中心波长对应口径,继而结合彗差约束条件,确定球面镜离轴角,并基于几何光学确定聚焦镜初始通光口径的方法.利用ZEMAX软件对初始参量进行模拟优化,并采用自主研制的样机进行光谱测量,分析结果表明,该光学系统能够在狭缝宽度为25μm,光栅常数为1.667μm/line条件下,实现中心波长分辨率优于1nm,边缘波长分辨率优于1.5nm.     

太阳模拟器用光学积分器设计

针对传统太阳模拟器普遍存在辐照均匀度较低的缺陷,改进设计了一种可以有效提高太阳模拟器辐照均匀度的光学积分器.介绍了该光学积分器的组成和工作原理;阐述了光学系统的优化设计技术;对其光机结构进行合理化设计,并使用ansys软件对光机结构进行热分析.最后,利用lightTools软件对太阳模拟器系统进行模拟仿真.结果表明:使用所设计的光学积分器后,太阳模拟器辐照不均匀度明显降低,在Φ60 mm范围内小于±1％,在Φ(60～200)mm范围内小于±2％.该结果与实际检测结果一致,能够满足高准确度的使用要求.     

凸面光栅成像光谱仪全视场自动化光谱定标系统设计

为了确定凸面光栅成像光谱仪的光谱特性,需要对凸面光栅成像光谱仪进行光谱定标。基于单色准直光法设计了一套全视场光谱定标系统,引入球面镜提供准直光,采用一块可以自由滑动和转动的折转镜改变定标光线的入射角,实现了全谱段自动化光谱定标。运用光学设计软件CODEV对光谱定标系统进行了部分光学模拟,证明了整个系统的可靠性。结合光谱定标系统的结构和特点,对整个光谱定标系统进行了精度分析。理论分析结果表明,该系统的光谱定标精度优于1%。该定标系统具有体积小、通用性强等特点,可为其他成像光谱仪的光谱定标提供参考。     

太阳模拟器用光学积分器设计

针对传统太阳模拟器普遍存在辐照均匀度较低的缺陷,改进设计了一种可以有效提高太阳模拟器辐照均匀度的光学积分器.介绍了该光学积分器的组成和工作原理;阐述了光学系统的优化设计技术;对其光机结构进行合理化设计,并使用ansys软件对光机结构进行热分析.最后,利用lightTools软件对太阳模拟器系统进行模拟仿真.结果表明:使用所设计的光学积分器后,太阳模拟器辐照不均匀度明显降低,在Φ60 mm范围内小于±1%,在Φ(60~200)mm范围内小于±2%.该结果与实际检测结果一致,能够满足高准确度的使用要求.     

小型弹箭转动惯量的测定

本文阐述了对称式三线摆的结构原理 ,介绍了该摆微角与大角摆动周期的计算方法 ,利用该摆可以测量小型弹箭、炮弹头、飞机模型及其他构件的转动惯量 .当R/L <1 /3 0、φ0 <60°时 ,该装置的测量准确度优于 1 % .     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.