Fabrication of defocus graded-index optical waveguide for evanescent wave optical amplifier

This is the first report on an evanescent wave optical amplifier with a plastic waveguide that can amplify a CW signal transmitted by a plastic optical fiber. The waveguide with a concave refractive index distribution was fabricated by an interfacial-gel polymerization technique. Since the waveguide increases the number of reflections at the boundary surface of the waveguide and the laser dye solution, the enhancement of amplification efficiency can be realized. The function of the fabricated waveguide was confirmed by calculations and experiments. The obtained results indicate that the fabricated fiber generated a larger evanescent field than the waveguide without a refractive index distribution.     

内置调制层型光纤表面等离子体波共振传感器研究

研究了一种基于内置调制层结构的光纤表面等离子体波共振(SPR)传感器。通过在金膜与纤芯的内侧增覆具有不同厚度和属性的光学透明薄膜作为内调制层,构成了性能独特的光电复合薄膜,起到调节倏逝波矢量和金膜表面等离子体振荡波矢量的双重作用,进而控制共振效应,为调节灵敏度提供依据。采用时域有限差分方法对内置调制层结构光纤SPR共振激励模型属性进行数值仿真。在此基础上,研制了用于液体折射率测量的内置调制层型光纤SPR传感探针。实验结果表明,该传感器在1.335～1.392折射率范围内,随着待测液体折射率的增大,SPR共振光谱向长波方向偏移,且灵敏度达到2263.1nm/RIU,与基于纤芯-金膜-环境介质三层结构的常规光纤SPR传感器相比提高一倍,能够更好地满足环境折射率检测的需求。     

Distributed feedback laser action in an optical fiber by evanescent field coupling

Distributed feedback (DFB) laser action has been demonstrated in an optical fiber surrounded by a gain modulated dye solution of lower refractive index. The mechanism of feedback and gain is by evanescent wave interactions.     

Refractive index sensor using microfiber-based Mach-Zehnder interferometer

A simple and robust refractive index (RI) sensor based on a Mach-Zehnder interferometer has been demonstrated. A section of optical microfiber drawn from silica fiber is employed as the sensing arm. Because of the evanescent field, a slight change of the ambient RI will lead to the variation of the microfiber propagation constant, which will further change the optical length. In order to compensate the variation of the optical length difference, a tunable optical delay line (ODL) is inserted into the other arm. By measuring the delay of the ODL, the ambient RI can be simply demodulated. A high RI sensitivity of about 7159 μm/refractive index unit is achieved at microfiber diameter of 2.0 μm.     

轴向隐失波激励的回音壁模式光纤激光器

采用轴向隐失波激励增益的方式,使激光增益区域局限在光纤回音壁模式的模场区域内,显著地降低了回音壁模式光纤激光辐射的抽运阈值,由此形成一种低阈值的回音壁模式光纤激光器.在微焦耳量级的低抽运能量条件下,用回音壁模式光纤激光器研究了激光染料的浓度效应.实验结果表明,随着激光染料浓度的增加,回音壁模式激光辐射的波长向长波方向移动,激光波长范围变宽.用回音壁模式染料激光的四能级模型得到激光上能级和所有能级上的分子数比值γ(λ)曲线后,很好地解释了实验结果.低抽运阈值的回音壁模式光纤激光器,为研究液体激光现象提供了极为便利的手段.     

微流芯片中消逝波激励的荧光辐射特性研究

将石英裸光纤植入聚二甲基硅氧烷基片的微流道中,采用沿光纤轴向光抽运、消逝场激励染料分子的方式,在基片微流道中获得均匀的荧光辐射.实验发现,荧光辐射的强度随光纤轴向距离的增加而衰减,光纤包层溶液折射率越大,荧光沿光纤轴向的衰减越突出;包层溶液中染料浓度越大,荧光沿光纤轴向的衰减也越突出;通过选择适当的包层溶液折射率以及染料浓度可以获得沿光纤轴向接近均匀的荧光辐射.用消逝波激励荧光的辐射理论计算了荧光光强沿光纤轴向的变化,计算结果与实验符合较好.在此基础上,设计并制作了一种具有三个通道的聚二甲基硅氧烷基片,通过在三个微流道中分别注入染料浓度均为0.1 mmol的罗丹明640、罗丹明B及罗丹明6 G的乙醇染料溶液,采用沿光纤轴向消逝波光激励方式,在一块聚二甲基硅氧烷基片上同时实现了三个不同波段的荧光辐射.     

基于无芯光纤的多参数测量传感器

设计并制作了一种基于单模-无芯-单模-无芯-单模光纤结构的马赫-曾德尔传感器,可用来同时测量折射率和温度.该传感器中,两处无芯光纤充当输入、输出耦合器,中间单模光纤作为传感臂.利用有限元仿真和理论分析,确定耦合器和传感臂的最优长度为15 mm.在无芯光纤中激发出的高阶模进入单模光纤的包层传输,由于倏逝场的作用,受到环境折射率和温度的影响.选取透射谱不同干涉级次的波谷作为研究对象,实现了折射率和温度的同步测量.实验结果表明:1545 nm附近干涉谷的折射率和温度灵敏度分别为–153.89 nm/RIU(refractive index unit)和0.166 nm/℃;1570 nm附近干涉谷的折射率和温度灵敏度分别为–202.74 nm/RIU和0.183 nm/℃.该传感器在实现折射率和温度同步测量的同时,仍能保持较高灵敏度,在生物医疗等方面有着较好的应用前景.     

Cavity-enhanced spectroscopy in optical fibers

Cavity-enhanced methods have been extended to fiber optics by use of fiber Bragg gratings (FBGs) as reflectors. High-finesse fiber cavities were fabricated from FBGs made in both germanium/boron-co-doped photosensitive fiber and hydrogen-loaded Corning SMF-28 fiber. Optical losses in these cavities were determined from the measured Fabry-Perot transmission spectra and cavity ring-down spectroscopy. For a 10-m-long single-mode fiber cavity, ring-down times in excess of 2 ms were observed at 1563.6 nm, and individual laser pulses were resolved. An evanescent-wave access block was produced within a fiber cavity, and an enhanced sensitivity to optical loss was observed as the external medium's refractive index was altered.     

光纤回音壁模式的三波段激光辐射研究

将石英光纤浸入低折射率的激光染料溶液中构成圆柱形微腔.采用沿光纤轴向光抽运的消逝波激励增益方式,获得了沿光纤轴向长距离的激光染料增益,受激辐射光在圆柱形微腔中回音壁模式的支持下形成激光振荡.在直径为288 μm的同一根光纤外分三段分别填入罗丹明6G、罗丹明610和罗丹明640激光染料乙二醇溶液,实现了波长分别在567～575 nm、605～614 nm和656～666 nm三个不同波段的回音壁模式激光振荡,用一根光纤同时获得了红、橙、黄三种不同颜色的激光辐射.对实验所获得的回音壁模式激光光谱做了模式标定,依据标定的模式数计算了各种模式以及抽运光在光纤截面的强度分布.计算结果表明,激光增益区域总是局限在圆柱形微腔回音壁模式的模场区域内,由此可以显著地提高抽运效率,增加抽运光沿光纤轴向的增益长度.     

应用于低折射率样品检测的SERS活性液芯光纤

用纳米组装方法在空心光纤内壁修饰SERS活性基底构成内壁具有表面增强拉曼光谱活性层的液芯光纤。激发光由光纤壁横截面入射,并在光纤壁中传播。由于光纤壁的折射率大于检测样品溶液的折射率,使得激发光在光纤壁中发生全反射,并在消逝场下穿透修饰层,激发样品拉曼散射。本方法融合了表面增强拉曼光谱技术与液芯光纤技术的优势,可成为应用于低折射样品溶液体系检测的又一手段。     

基于数字全息图的光纤折射率测量研究

利用数字全息显微层析技术构建了光纤折射率测量的测试系统, 包括光路系统与软件系统. 以物光波的相位分布曲线为依据由CCD记录最优的数字全息图; 在优化频谱图的基础之上对全息图做频域滤波, 准确选取物光波所对应的频谱范围; 使用基于角谱理论的再现算法提取出物光波的相位分布信息, 并通过模拟全息图验证相位提取的准确性; 由单幅全息图提取的相位分布信息, 结合光纤的多层模型, 还原出光纤断层面沿直径方向的折射率分布. 以单模、多模光纤为实验样品进行了测量, 测量结果与S14折射率测量仪的测量结果吻合, 精度可达10^-4. 实验对比结果表明本文方法可简单、快速、准确地测量光纤内部的折射率. 本文还对特种光纤的折射率进行了测量研究.     

γ辐射对光纤波导电磁场分布的影响

开展了光纤波导中的电磁场传输理论分析,得到了光纤折射率变化对波导中电磁场分布的影响规律,建立了块状融石英材料及光纤光栅在60Co 辐射作用下折射率变化的测量系统,开展了折射率随辐射剂量变化及光纤模场测量实验。结果表明:光纤的折射率随辐射剂量的增加而增大,折射率的变化会引起波导中传输模式的场强分布变化,从而导致光纤的辐射感生波导损耗;在一定的辐射剂量范围（0～2000 Gy）内,光纤仍满足弱导边界条件,能够维持对传输模式的约束能力。     

微纳尺度光纤布拉格光栅折射率传感的理论研究

亚波长直径微纳光纤强倏逝场传输的光学特性,使其对周围介质折射率的变化具有极高的灵敏度.本文提出一种基于微纳尺度光纤布拉格光栅(MNFBG)的折射率传感器,结合微纳光纤倏逝场传输和光纤布拉格光栅(FBG)强波长选择的特性来实现高精度折射率传感,对其制备可行性进行了讨论.论文中对MNFBG折射率传感机理进行了深入的理论分析,并使用OptiGrating软件进行了数值模拟,模拟数据显示MNFBG折射率测量的灵敏度随着光纤半径的减小而增加,其中光纤半径为400 nm的MNFBG灵敏度可达到993 nm/RIU,相比于包层蚀刻的FBG灵敏度增加了170倍,说明MNFBG对发展微型化、高灵敏度折射率传感器具有良好的应用前景. 关键词： 微纳光纤 光纤布拉格光栅 折射率传感     

折射率调制型光纤传感器在溶液浓度测量中的应用

本文详细报道了用折射率调制型光纤传感器测量溶液浓度的原理及实验装置。为了消除光源光强的不稳定性对测量精度提高的影响,我们提出用光学双稳态装置稳定光源的输出功率并将它用于实际测量中,实验结果表明:本方法用于测量溶液的浓度在灵敏度、精度和稳定度方面都有较大的提高,并且可用于在线监测。     

消逝波激励的双波段光纤回音壁模式激光辐射

将石英光纤浸入低折射率的染料溶液中后构成圆柱形微腔.采用轴向光抽运消逝波激励激光增益的方式,使增益区域局限在圆柱形微腔回音壁模式的模场区域内,由此显著地提高了抽运效率,增加了沿光纤轴向的增益长度.在一根石英光纤的轴向分段填入浓度同为2×10^-3mol/L的罗丹明6G和罗丹明B乙醇溶液,在567—576nm 和592—600nm的两个波长范围内同时获得回音壁模式的激光辐射;分段填入浓度为8×10^-4和8×10^-3mol/L的罗丹明B乙醇溶液, 关键词： 消逝波激励 圆柱形微腔 回音壁模式 双波段激光辐射     

负折射率材料对隐失波的幅度增益

分析了隐失波透过负折射率材料制成的透镜时,可以实现相位的调整,从而实现波的聚焦的原理;另外利用叠加原理(干涉法)及场量匹配法分析了负折射率材料如何实现对隐失波的振幅的放大,得到负折射率材料对隐失波有幅度增益,行波和隐失波都能聚焦成像的结论;并利用传输线理论提出隐失波透过负折射率材料平板时可等效地形成一个LC振荡电路,从而实现对隐失波的幅度增益.     

Optical fiber Bragg grating hydrogen sensor based on evanescent-field interaction with palladium thin-film transducer

Fiber Bragg grating (FBG) sensors in single-mode optical fibers are widely applied for measurement of temperature and strain. If exposing FBG sensors to an external analyte by planar side-polishing technique of the fiber, evanescent-field interaction yields a Bragg wavelength shift also by changing the refractive index of the analyte. Deposition of sensor-specific transducer layers on the side-polished fiber can specify this spectrally encoding and network-capable optochemical fiber Bragg grating refractometry to the monitoring of specific substances, absorbed gases and vapors. In this paper, the sensor principle is demonstrated for the example of a hydrogen gas sensor based on a palladium thin-film transducer. Hydrogen in 0.1–4% volume concentration range can be monitored by the spectral shift of the Bragg wavelength, which is caused by the decreasing complex refractive index of Pd with increasing absorption of hydrogen.     

基于单元件干涉仪的计算机断层扫描重建光纤三维折射率分布

提出了一种基于单元件干涉仪的计算机断层扫描方案,用于测量光纤三维折射率分布。该单元件干涉仪基于显微成像的原理,提高了系统的横向分辨率。利用快速傅里叶变换提取相位,采用滤波反投影算法重建了光纤的折射率分布。搭建了实验测量装置,实际测量了单模和多模光纤的折射率分布。结果表明,提供的方法可以简单快速地得到全光场数据,同时具有无损和非接触的优点,并且光路结构紧凑稳定,可为计算机断层扫描设备的小型化提供一种新的思路。     

Designing of Optical Fiber Sensing Probe

Evanescent wave configuration has been extensively used in the development of fiber-optic sensor for different biomedical applications. In the present investigation we have theoretically proposed the designing of single-mode and multimode optical fiber sensing probes, which can be prepared by removing a few centimeters of cladding near the distal end of the step index optical fiber. In this theoretical study, we found that the removal of cladding causes V-number mismatching and this has led to the loss of signal acquisition from the sensing region. Therefore, to minimize these losses we have proposed to reduce the radius by step etch and tapering technique. It was found that step etching and tapering enhances the strength and penetration depth of the evanescent wave significantly.     

Wave guiding properties and sensitivity of D-shaped optical fiber microwire devices

D-shaped optical fiber microwire (OFM) devices are investigated theoretically. They can be obtained by wrapping OFMs on removable rods or laying the OFMs on disposable substrates. Optical wave guiding properties of these devices are discussed with numerical simulations. Dispersion properties of OFMs with different radii are studied as well. A grating-based D-shaped OFM is proposed for sensing applications. The corresponding sensitivity could reach 1100 nm/RIU (refractive index unit) due to its large outside evanescent field.