一种飞行器电气系统综合测试平台设计

为解决传统飞行器电气系统综合测试中存在的测试设备种类繁多、测试项目覆盖性差等诸多问题,在某飞行器测试覆盖能力改进项目中,提出一种基于PXI总线架构的综合测试平台设计思路,通过模块化的硬件与软件架构设计,完成飞行器电气系统的综合测试平台设计,并结合实际测试需求进行具体开发,实践表明该系统能够保证飞行器现场测试有序、规范、安全。     

飞行器供配电系统地面通用测试接口设计

供配电地面测试负责为飞行器提供模拟供电、控制状态切换、采集并传输系统状态信息,配合完成全飞行器全周期的综合测试任务。本文首先简要介绍了供配电地面测试系统的基本功能和设备组成,然后对供电、控制、测量的接口设计进行分析,最后提出接口通用化设计方案。本文为电气系统地面通用化测试研究提供了有益尝试。     

航电设备通用检测维护台的设计

为了适应机载武器装备系统的多样化以及通用性要求,搭建了基于PXI总线的航电设备通用检测维护台,在系统架构、硬件设计以及软件开发等各方面进行了通用性设计。该航电设备通用检测维护台基于PXI构架,挂装不同种类的适配器,操作通用平台上的人机接口,可满足多种设备的检测、测试任务。航电设备通用检测维护台在一个机柜内实现了人机交互操作,大功率、高精度、多种类通用电源及PXI智能测试平台等的高度集成。该通用平台具有良好的通用性和扩展性,适用多种机型、多种航电设备。通用平台已在某型航电设备的检测维护中完成了工程验证,系统性能稳定,适用性强,可实现多种航电设备的检测维护工作,也可推广至海军舰艇、兵器车载装备等。     

基于PXI总线的导弹测试系统设计

为了满足某型导弹的批生产测试需求,设计了基于PXI总线的导弹测试系统。介绍了该测试系统的系统组成、工作原理,详细阐述了硬件系统和软件系统的设计方法和思路。经过实践证明,该测试系统可实现导弹的全时序自动化测试,工作稳定、可靠性高,能够很好的满足某型导弹的测试需求。     

基于VeriStand的实时飞行测试系统设计与实现

针对飞行器改装带来的实时模飞测试问题,提出了一种实时飞行测试系统设计及实现方案。首先分析了待测飞控及安控系统的工作过程和技术特性,给出了实时测试系统应该具备的功能。基于功能需求,明确了系统采用PC上位机-PXI实时下位机的硬件架构,同时给出了上位机、下位机的硬件资源配置。系统采用VeriStand、MathWorks Simulink?、LabVIEW分别完成实时测试项目配置与管理、实时模型开发、虚拟串口设备驱动开发任务,并详细讨论了实时模型和虚拟串口设备驱动的开发过程。最后分析了实时测试结果。     

飞行器供配电系统通用测试方案设计

供配电测试设备中专用设备比例仍较高,导致研制费用高,使用维护不便,操作人员需熟悉各种设备,人员培训也形成了困难;通过飞行器通用测试需求分析,结合某项目供配电测试系统方案,提出设备通用、软件可二次编程的设计方案;通用性测试方案减少了专用设备数量,降低研制费用,提高使用效率,有利于提高设备继承性和互换性,实现供配电测试系统高可靠设计;经过通用化设计,设备功能满足设计要求,指标显著提高,且满足后续项目需求;最后展望了飞行器测试系统的技术发展和应用前景。     

空空导弹测试系统应用LXI总线研究

首先对空空导弹测试系统应用各种仪器总线的情况进行了分析研究,然后介绍了一台PXI总线测试设备的改造方案,该方案中设计了一套基于LXI总线控制的电源子系统,该子系统与PXI主系统一起形成了新的混合总线控制测试设备。该改造方案实现了改造需求中的低成本和小型化设计。同时,结合该方案分析了LXI总线在空空导弹测试系统上应用的优缺点和现阶段局限性。提出了空空导弹测试系统应向着通用、开放和网络化方向发展的观点,得出了未来的空空导弹测试系统将是包含GPIB、VXI、PXI、LXI等总线接口的合成系统,各总线接口仅是网络上的一个节点的结论。     

航天器数字化测试模式设计与应用

随着航天事业的发展,航天器将迎来高密度的研制和发射任务。测试设计和实施同步、测试现场消耗大的测试模式导致测试效率低下,不能满足未来的综合测试需求。为解决航天器测试效率不能适应测试任务的问题,设计了航天器数字化测试模式。搭建数字化测试平台,实现测试准备、测试实施、测试评估全周期自动化。基于数字化测试平台,开展综合测试专业化设计与实施。推进测试设计与测试实施分离,将测试设计工作前移,测试设计人员通过测试用例与测试判据的精细化设计,将测试准备工作做充分,实现测试实施和评估过程自动化。数字化测试模式应用于多个航天器型号综合测试,形成多个固化测试用例数据库,有效提升测试效率,为后续型号测试能力的提升奠定坚实的基础。     

通用串行航空总线综合测试系统设计

针对目前串行航空总线测试设备功能单一的问题,设计了一种兼容多总线的便携式通用串行航空总线综合测试系统。方案采用模块化设计,详细叙述了系统的硬件及软件设计,系统由通用串行总线仿真设备终端与测试分析设备构成,系统涉及多种串行航空总线,可完成多总线仿真激励输出、监控接收及数据仿真分析功能,可最大程度满足航空电子系统的设备与系统仿真需求。实验结果表明,该通用串行航空总线综合测试系统稳定性好、可靠性高、使用便捷,满足设计需求。     

基于虚拟仪器的舵机综合测试系统设计

为了在实验室条件下模拟舵机系统实际飞行时所受的气动载荷,实现舵机部件和整机的动静态测试,设计了基于虚拟仪器的舵机综合测试系统。针对舵机测试系统自动化化和综合化需求,基于PXI架构和LabWindows/CVI平台,完成了测试系统的硬件设计和软件设计,采用异步定时器实现了实时数据采集,采用tdms数据流实现了大容量高速数据的记录,运用多线程实现了良好的人机交互与流畅的曲线显示,采用ActiveX技术调用Excel实现了测试报表的自动生成。使用和测试结果表明,该测试系统显著提高了舵机测试的效率和精确度以及自动化水平,使用方便,性能稳定,为舵机性能测试和设计优化提供了可靠保障。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.