激光二极管抽运的GaAs被动Q开关Nd：YVO4激光器

利用固体可饱和吸收体砷化镓（GaAs）作为被动调Q元件，实现了激光二极管抽运平－凹腔掺钕钒酸钇（Nd:YVO4）激光调Q运转，详细测量了砷化镓被动调QNd:YVO4激光输出特性，获得脉宽15ns，重复频率470kHz，光束质量M^2=1.31的激光输出，调Q激光运转阈值为500mW，并数值求解了砷化镓被动调Q速率方程，讨论了被动调Q机理以及调Q脉冲宽度和脉冲重复频率对抽运速率的依赖关系，理论计算结果与实验结果相一致。     

100 W全光纤声光调Q光纤激光器实验研究

 报道了一台全光纤结构主振荡功率放大(MOPA)型掺镱脉冲光纤激光器,以光纤光栅为腔镜,光纤型声光调Q的光纤激光器为种子源,通过两级掺镱双包层光纤放大器实现功率放大。对声光调Q的光纤激光器输出特性进行了研究,比较了不同泵浦波长、不同重复频率对激光输出功率和脉冲宽度的影响,并实现了最短脉冲宽度25 ns、单脉冲能量45 μJ的脉冲激光输出。在重复频率50 kHz时,对脉冲宽度130 ns、平均功率0.6 W的种子光进行放大,得到了平均功率102.5 W、脉冲宽度约240 ns的激光输出。     

Spectrally Adjustable Picosecond Dye Laser Pulses Generated with Nanosecond Nitrogen Lasers

ＳｐｅｃｔｒａｌｌｙＡｄｊｕｓｔａｂｌｅＰｉｃｏｓｅｃｏｎｄＤｙｅＬａｓｅｒＰｕｌｓｅｓＧｅｎｅｒａｔｅｄｗｉｔｈＮａｎｏｓｅｃｏｎｄＮｉｔｒｏｇｅｎＬａｓｅｒｓＮｇｕｙｅｎＤａｉＨｕｎｇ；ＰｈａｍＬｏｎｇ；ＤｉｎｈＶａｎＴｒｕｎｇ；ＮｇｕｙｅｎＶａ...     

采用光谱展宽技术的钛宝石飞秒激光放大器

报道了飞秒激光啁啾脉冲放大器中的激光脉冲光谱展宽技术，实验中使用了几种光谱展宽元件，结果表明使用激光光谱展宽元件能有效地将飞秒激光脉冲 光谱展宽，抑制了飞秒激光放大器中常见的激光脉冲光谱增益窄化现象，从飞秒放大系统的振荡级输出28fs种子脉冲，放大后得到了重复频率为10Hz、峰值功率为1．6TW、脉冲宽度37．5fs的超短强飞秒激光脉冲 。     

Optically pumped terahertz lasers with high pulse repetition frequency: theory and design

Optically pumped terahertz （THz） lasers with high pulse repetition frequency are designed. Such a laser includes two parts： the optically pumping laser and the THz laser. The structures of the laser are described and analyzed. The rate equations for the pulsed THz laser are given. The kinetic process and laser pulse waveform for this kind of laser are numerically calculated based on the theory of rate equations. The theoretical results give a helpful guide to the research of such lasers.     

高重频2.94 μm Er:YAG激光器的研究

分析了Er3+离子的能级结构特性和Er:YAG四能级系统的激光速率方程。采用了双灯,双椭圆腔和窄脉冲放电等方式提高了抽运效率; 通过提高激光谐振腔的反射率,降低阈值,从而实现了输出2.94 μm的高重频窄脉冲激光; 采用高压高速层流冷却技术降低了热效应的影响。Er3+:YAG激光器的重复频率为40 Hz,单脉冲输出能量为0.5 J,满足实际应用需要。     

高重复率电光调Q的高光束质量Nd∶YVO_4板条激光器

部分端面抽运混合腔板条激光器可以在紧凑的空间内实现大功率高光束质量的激光输出。利用这一技术并结合具有增益高、荧光寿命短等特点的Nd∶YVO4晶体 ,配合新型高重复率的电光Q开关 ,易于实现高频窄脉冲高光束质量的激光输出。在德国EdgeWaveGmbH进行了混合腔电光调Q激光器的合作研究中 ,实现了高重复率近衍射极限的输出 ;在以 5kHz的高重复率运转时 ,获得了单脉冲能量 7 2mJ ,脉宽 5 7ns,平均功率约 36W的脉冲 ;当重复率高达 5 0kHz时 ,输出的激光脉冲的参量是单脉冲能量 1.6mJ,脉宽 9 5ns,平均功率超过 80W。实验所测的光束质量因子M2 小于 2。     

Temporal dynamics of high repetition rate pulsed single longitudinal mode dye laser

Theoretical and experimental studies of temporal dynamics of grazing incidence grating (GIG) cavity, single-mode dye laser pumped by high repetition rate copper vapour laser (CVL) are presented. Spectral chirp of the dye laser as they evolve in the cavity due to transient phase dynamics of the amplifier gain medium is studied. Effect of grating efficiency, focal spot size, pump power and other cavity parameters on the temporal behaviour of narrow band dye laser such as build-up time, pulse shape and pulse width is studied using the four level dye laser rate equation and photon evolution equation. These results are compared with experimental observations of GIG single-mode dye laser cavity. The effect of pulse stretching of CVL pump pulse on the temporal dynamics of the dye laser is studied.     

可控制变频率微片激光器

 用20 W光纤耦合LD作为泵浦光源，对Nd^{3+sup>:YVO_{4/sub>微片进行了增益开关实验，获得了可控制变重复频率（1 Hz～25 kHz）的调Q激光输出。输出脉冲激光的宽度为16 ns，输出的峰值功率在几W。从速率方程出发进行了增益开关理论研究，通过数值解，分析了输出激光特性：当泵浦电流高于产生单脉冲的电流时，增加泵浦电流将在一个泵浦脉宽中出现多个激光脉冲输出；增加泵浦脉宽，将在一个泵浦脉宽中出现多个激光脉冲输出，泵浦脉宽越大，子脉冲个数越多；当增加重复频率时，输出与泵浦激光重复频率完全一致的激光脉冲，但也将在一个泵浦脉宽中出现多个激光脉冲输出。}}     

LD端面泵浦Cr~4∶YAG被动调Q激光器输出特性研究

对激光二极管端面泵浦Cr4+∶YAG被动调Q Nd∶YAG激光器输出特性进行了实验研究.实验研究发现,激光器输出功率及脉冲重复频率随谐振腔长度增大而增大.为解释这一实验现象,测量了泵浦光斑在激光晶体内尺寸,同时计算了激光晶体及Cr4+∶YAG晶体内的基模激光光斑半径随谐振腔长度变化.分析结果表明:激光晶体内泵浦光斑尺寸远小于激光晶体内基模光斑半径,腔模间交叠效率较低;当腔长增加时,激光晶体内的基模激光光斑减小,腔模间交叠效率增加,从而导致输出功率及脉冲重复频率随腔长增加而增加;另外,Cr4+∶YAG晶体内光斑半径也随谐振腔长度减小,引起Cr4+∶YAG晶体漂白时间缩短,导致脉冲重复频率随腔长增加而增加.     

基于波长330nm激光激发多色激光导星回波光子数的数值计算与探讨

采用无模激光器发射波长为330 nm的激光激发多色激光导星,需要考虑脉冲激光重频率、激光带宽、激光初始光斑直径以及大气透过率对回波光子数的影响.通过数值模拟,计算了高斯光束的脉冲激光和连续激光激发多色激光导星在实际大气中后向辐射330 nm和2207 nm波长的回波光子数.数值计算结果表明,在垂直发射和接收的情况下,当到达大气中间层的激光能量为1 W时,连续激光能够获得更多的回波光子数,并且回波光子数几乎无起伏.对于脉冲激光,提高脉冲激光重频率达到50 kHz以上时,多色激光导星330 nm的回波光子数随脉冲重频率的增加趋于有限值;当大气能见度小于5 km且大气相干长度为12.8 cm时,大约需要34 W以上的激光发射能量,才能获得满足使用自然星全倾斜探测的330 nm回波光子数.对于连续激光,相同情况下,大约需要20 W以上的激光发射能量.     

Analysis of tunable picosecond pulse generation from a distributed feedback Ti：sapphire laser

A distributed feedback Ti:sapphire laser (DFTL) pumped by a 532nm Q-switched pulse is proposed for the generation of tunable picosecond pulses. With coupled rate equation model, the temporal characteristics of DFTL are obtained. The numerical solutions show that the DFTL pulse with a 50-ps pulse duration and as much as 3.SmJ pulse energy can be obtained under 40-m J, 5-ns pulse pumping. The dependence of output pulse width on the laser crystal‘s length, pumping pulse duration, and pumping rate is also discussed in detail.     

Ablation efficiency of α-Al2O3 in liquid phase and ambient air by nanosecond laser irradiation

Ablation efficiency and influences of laser parameters on a material removal rate by a nanosecond laser irradiation of α-Al₂O₃ are studied in gas and liquid phases. The laser ablation in the air yields maximum material removal rate of 12 ng/pulse using a 4.6-mJ pulse energy at 4-kHz repetition rate, compared to 88 ng/pulse in the water flow. Using a specific interpulse distance and a laser repetition rate further increase material removal rate by factor of 3 and 65, respectively, owing to an optimized lattice temperature and laser pulse interactions with the generated cavitation bubble. For the ablation in the air, these parameters do not significantly affect the ablation efficiency.     

主控抽运被动调Q激光器和输出特性

对脉冲抽运与增益预抽运的微腔Cr4+:YAG/Nd:YAG被动调Q激光器的稳定性进行了理论和实验研究。结果表明在抽运时抽运脉宽和重复率较大的情况下,输出激光脉冲相对于抽运脉冲抖动范围明显加大。针对此情况,采用压缩抽运脉宽和降低重复率的方法获得了波长为1.06 μm、脉宽为3.8 ns、单脉冲能量为65 μJ、相对抽运脉冲的抖动范围小于0.8 μs的激光输出。同时分析了增益预抽运的优势和缺点。     

Coupled-cavity passively Q-switched two-Stokes microchip laser

Experimental and theoretical studies of the coupled-cavity diode-pumped Nd:YAG/Cr:YAG microchip lasers with intracavity Raman conversion of laser pulses in a Ba(NO₃)₂ crystal into two Stokes pulses have been made. Two lasers with a different cavity length have been investigated. The minimal pulse durations at the 2nd Stokes wavelength were ??100 ps in the short-cavity laser at pulse energy of 5???J, and the pulse repetition rate reached 20?C24?kHz. The laser and Stokes pulse dynamics, as well as the spatial intensity distribution of the laser and the 1st Stokes beams at the output mirror have been recorded. A model describing such coupled-cavity microchip Raman lasers has been developed. The numerically simulated laser and Stokes pulse dynamics, and the calculated pulse energy, duration, and repetition rate are in good agreement with the experimental data.     

Theoretical investigation of feasibility of Yb:YAG as laser material for nanosecond pulse emission with large energies in the Joule range

The long fluorescence lifetime of the upper laser level of Yb:YAG seems to make it an attractive material for the realization of Q-switched pulses with large pulse energy. The consequences of the spectroscopic parameter set of Yb:YAG for the feasibility of a large pulse energy laser, which emits pulses with nanosecond duration, are addressed on the basis of a rate equation model. The rate equations are analytically solved and applied to the optical side pumping of Yb:YAG rods. The thermal population of the lower laser level and the saturation of the laser material are discussed in specific.     

Q-switch rise time effect in flash-pumped solid state lasers

The effect of the rise time of the Pockels cell on the output laser pulse is investigated. The pump system in a flash pumped Nd:YAG laser with unstable resonator is numerically analyzed and simulated. The time dependent flash discharge current is calculated and the optical time-dependent variation of the flash pulse is deduced. The numerical simulation of the whole laser gives the solution of the system of four level Nd:YAG differential rate equations. The pump power is considered variable and dependent on the flash pump pulse shape and power. The Q-switch rise time is included in the rate equations as a variable time dependant loss parameter. The laser pulse shape and output characteristics are calculated. Numerical and some experimental results are presented and discussed.     

脉冲LDA泵浦Nd∶YVO4/GaAs被动调Q锁模激光器

用脉冲激光二极管阵列（LDA）作为泵浦源、微柱透镜阵列和透镜导管作为耦合系统,以As＋注入GaAs可饱和吸收片作为被动调Q锁模元件,实现了Nd∶YVO4激光器调Q锁模运转.调Q运转阶段,激光器每泵浦脉宽内输出一个调Q脉冲,调Q脉宽7ns.调Q锁模运转阶段,初始透过率60％的GaAs晶片对调Q包络内的锁模脉冲的调制深度达到95％以上,锁模脉冲重复频率991 MHz.研究了加在LDA上的电压、方波脉冲的脉宽和重复频率对调Q锁模脉冲特性的影响,并对实验结果进行了讨论.     

Multi-terawatt laser system generating 12-fs pulses at 100 Hz repetition rate

We have developed a laser system generating high peak-power ultrashort pulses based on the chirped pulse amplification of a Ti:sapphire laser. The pulse duration of the laser is reduced to 12 fs, owing to the successful compensation of gain narrowing during amplification with novel optics. The pulse energy and the repetition rate are 40 mJ and 100 Hz, respectively, as a consequence of sufficient energy extraction from a laser medium in the final stage of a multipass amplifier chain, which is designed to balance focusing with a thermal lens against defocusing with convex mirrors without cryogenic cooling for Ti:sapphire crystals. The laser pulses delivered from this laser system are suitable for generating an intense attosecond pulse train in a vacuum ultraviolet or extreme ultraviolet region.     

LD端面泵浦Cr4:YAG被动调Q激光器输出特性研究

对激光二极管端面泵浦Cr⁴⁺:YAG被动调QNd:YAG激光器输出特性进行了实验研究.实验研究发现,激光器输出功率及脉冲重复频率随谐振腔长度增大而增大.为解释这一实验现象,测量了泵浦光斑在激光晶体内尺寸,同时计算了激光晶体及Cr⁴⁺:YAG晶体内的基模激光光斑半径随谐振腔长度变化.分析结果表明:激光晶体内泵浦光斑尺寸远小于激光晶体内基模光斑半径,腔模间交叠效率较低;当腔长增加时,激光晶体内的基模激光光斑减小,腔模间交叠效率增加,从而导致输出功率及脉冲重复频率随腔长增加而增加;另外,Cr⁴⁺:YAG晶体内光斑半径也随谐振腔长度减小,引起Cr⁴⁺:YAG晶体漂白时间缩短,导致脉冲重复频率随腔长增加而增加.